Mark Jonas 9ea7519383 arm, imx6: add alternative PAD_CTL_DSE constants ... Not all i.MX6 pads use the same drive strength table. So far only the 240 Ohm to 34 Ohm table was available. Because the constants used have speaking names it can be confusing to use e.g. PAD_CTL_DSE_48ohm when according to the reference manual 52 Ohm is the correct value. This patch adds the 260 Ohm to 37 Ohm table. For example, the IOMUXC_SW_PAD_CTL_PAD_SD2_CLK register (SD-card clock) uses the added table. Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Stefano Babic <sbabic@denx.de>		2018-07-23 10:57:39 +02:00
..
cpu	ARM: PSCI: initialize stack pointer on secondary CPUs	2018-07-23 10:53:12 +02:00
dts	board: toradex: add Colibri iMX6ULL support	2018-07-23 10:12:00 +02:00
include	arm, imx6: add alternative PAD_CTL_DSE constants	2018-07-23 10:57:39 +02:00
lib	arm: Remove unused _relocate arguments	2018-07-19 16:31:36 -04:00
mach-aspeed	regmap: change regmap_init_mem() to take ofnode instead udevice	2018-05-07 15:49:51 -04:00
mach-at91	board/aries: Remove	2018-07-02 15:52:50 -04:00
mach-bcm283x	efi_loader: Convert runtime reset from switch to if statements	2018-06-14 10:52:14 +02:00
mach-bcmstb	board: arm: Add support for Broadcom BCM7445	2018-07-10 16:55:57 -04:00
mach-davinci	dm: gpio: Add DM compatibility to GPIO driver for Davinci	2018-06-18 14:43:12 -04:00
mach-exynos	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-highbank	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-imx	imx: mx7: psci: implement MIGRATE_INFO_TYPE	2018-07-23 10:54:32 +02:00
mach-integrator
mach-keystone	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-kirkwood	ARM: add SBx81LIFKW board	2018-06-05 07:29:09 +02:00
mach-meson	boards: amlogic: Fix boards README	2018-07-19 16:31:36 -04:00
mach-mvebu	lib: fdtdec: Rename routine fdtdec_setup_memory_size()	2018-07-19 10:49:56 +02:00
mach-omap2	ARM: mach-omap2: omap3/am335x: Enable ACR::IBE on Cortex-A8 SoCs for CVE-2017-5715	2018-06-29 11:30:39 -04:00
mach-orion5x	ARM: orion5x: fix use of callee-saved registers in lowloevel_init	2018-06-07 09:12:26 -04:00
mach-owl	board: Add uCRobotics Bubblegum-96 board support	2018-07-09 15:25:23 -04:00
mach-qemu	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-rmobile	ARM: renesas: Add R8A77990 E3 Ebisu board	2018-06-01 09:47:21 +02:00
mach-rockchip	rockchip: veyron: Set vcc33_sd regulator value	2018-07-21 01:55:27 +02:00
mach-s5pc1xx	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-snapdragon	mach-snapdragon: increase size of malloc pool	2018-05-29 11:01:37 -04:00
mach-socfpga	lib: fdtdec: Rename routine fdtdec_setup_memory_size()	2018-07-19 10:49:56 +02:00
mach-sti
mach-stm32	mach-stm32: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET	2018-07-13 14:47:29 -04:00
mach-stm32mp	stm32mp1: activate MISC support in SPL	2018-07-20 15:55:05 -04:00
mach-sunxi	dm: sunxi: Use DM for MMC and SATA on all A10 boards	2018-07-16 12:26:00 +05:30
mach-tegra	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-uniphier	ARM: uniphier: rename environment variable fdt_file to fdtfile	2018-05-23 00:32:39 +09:00
mach-versatile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-zynq	arm: zynq: spl: fix FPGA initialization	2018-07-19 10:49:57 +02:00
mach-zynqmp-r5	arm: zynqmp: Add ZynqMP minimal R5 support	2018-05-11 09:38:23 +02:00
thumb1/include/asm/proc-armv	SPDX: Convert a few files that were missed before	2018-05-10 20:38:35 -04:00
config.mk	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
Kconfig	soc: qualcomm: Add Shared Memory Manager driver	2018-07-19 16:31:37 -04:00
Kconfig.debug
Makefile	board: arm: Add support for Broadcom BCM7445	2018-07-10 16:55:57 -04:00