u-boot/include/configs/km
Aleksandar Gerasimovski 91ee54741e board/km: add support for seli8 design based on nxp ls102x
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids
XMC and FOX product lines.

It is based on NXP LS1021 SoC and it provides following interfaces:
 - IFC interface for NOR, NAND and external FPGA's
 - 1 x RGMII ETH for debug purposes
 - 2 x SGMII ETH for management communication via back-plane
 - 1 x uQE HDLC for management communication via back-plane
 - 1 x I2C for peripheral devices
 - 1 x SPI for peripheral devices
 - 1 x UART for debug logging

It is foreseen that the design will be later re-used for another XMC and
FOX service cards with similar SoC requirements.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
..
keymile-common.h Prepare v2021.01-rc5 2021-01-05 16:20:26 -05:00
km-mpc83xx.h mpc83xx, keymile boards: enable DM_ETH and add DTS 2020-09-17 06:09:54 +02:00
km-mpc832x.h mpc83xx, keymile boards: enable DM_ETH and add DTS 2020-09-17 06:09:54 +02:00
km-mpc8309.h ppc/km/tegr1: support second localbus clock signal 2019-12-23 14:06:47 +05:30
km-mpc8360.h mpc83xx, keymile boards: enable DM_ETH and add DTS 2020-09-17 06:09:54 +02:00
km-powerpc.h remove obsolete option CONFIG_JFFS2_CMDLINE 2020-12-02 16:21:58 -05:00
km_arm.h board/km: move km i2c deblock declarations to a km/common.h 2021-02-08 14:01:18 +05:30
pg-wcom-ls102xa.h board/km: add support for seli8 design based on nxp ls102x 2021-04-15 14:22:17 +05:30