mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 02:20:25 +00:00
2a8a353958
The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com> |
||
|---|---|---|
| .. | ||
| clock.h | ||
| config.h | ||
| cpu.h | ||
| fdt.h | ||
| fsl_serdes.h | ||
| immap_lsch2.h | ||
| immap_lsch3.h | ||
| imx-regs.h | ||
| mmu.h | ||
| mp.h | ||
| ns_access.h | ||
| ppa.h | ||
| soc.h | ||
| speed.h | ||
| stream_id_lsch2.h | ||
| stream_id_lsch3.h | ||