Ran Wang 2a8a353958 armv8: Add workaround for USB erratum A-009798 ... The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>		2017-09-11 08:01:06 -07:00
..
arc	env: Rename getenv/_f() to env_get()	2017-08-16 08:30:24 -04:00
arm	armv8: Add workaround for USB erratum A-009798	2017-09-11 08:01:06 -07:00
m68k	m68k: add board stmark2, mcf5441x based	2017-08-18 01:26:52 +02:00
microblaze	env: Rename getenv/_f() to env_get()	2017-08-16 08:30:24 -04:00
mips	env: Rename getenv/_f() to env_get()	2017-08-16 08:30:24 -04:00
nds32	env: Rename getenv/_f() to env_get()	2017-08-16 08:30:24 -04:00
nios2	env: Rename getenv/_f() to env_get()	2017-08-16 08:30:24 -04:00
powerpc	powerpc: Rework interrupt_init_cpu()	2017-08-26 14:56:08 -04:00
sandbox	sandbox: Add a dummy invalidate_dcache_range() function	2017-08-28 07:17:16 -04:00
sh	sh: Fix linking of ms7722se	2017-08-27 11:50:16 -04:00
x86	x86: baytrail: acpi: Add full reset bit to the reset register value in FADT	2017-09-02 23:35:55 +08:00
xtensa	env: Rename getenv/_f() to env_get()	2017-08-16 08:30:24 -04:00
.gitignore	.gitignore: drop include/asm/proc from ignore pattern	2014-06-19 11:18:54 -04:00
Kconfig	usb: net: migrate USB Ethernet adapters to Kconfig	2017-09-08 10:23:00 -04:00