u-boot/drivers/serial
Johannes Schneider 25b7ce3287 serial: mxc: enable the RX pipeline
on imx8(mm) the RXDMUXSEL needs to be set for data going over the wire
(as observable on a connected 'scope) to actually make it into the
RXFIFO

the reference manual is not overly clear about this, and only
mentiones that "UCR3_RXDMUXSEL should always be set." - and since the
CR3 register reverts to its reset values after setting the baudrate,
setting this bit is done during '_mxc_serial_setbgr'

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 22:56:10 +02:00
..
altera_jtag_uart.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
altera_uart.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
arm_dcc.c serial: arm_dcc: Use CONFIG_ARM64 not CONFIG_CPU_ARMV8 2021-12-27 16:20:18 -05:00
atmel_usart.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
atmel_usart.h SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
Kconfig arm: Remove PXA architecture support 2022-07-07 09:29:08 -04:00
lpc32xx_hsuart.c dm: treewide: Rename ..._platdata variables to just ..._plat 2020-12-13 16:51:09 -07:00
Makefile arm: Remove PXA architecture support 2022-07-07 09:29:08 -04:00
ns16550.c serial: ns16550: Wait in debug_uart_init until tx buffer is empty 2022-07-08 12:20:04 -04:00
sandbox.c serial: sandbox: Fix buffer underflow in puts 2022-06-23 12:58:18 -04:00
serial-uclass.c serial: Fix _serial_puts using \n\r instead of \r\n 2022-04-14 15:39:15 -04:00
serial.c serial: Add semihosting driver 2022-04-01 15:03:13 -04:00
serial_ar933x.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_arc.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_bcm283x_mu.c doc: replace @return by Return: 2022-01-19 18:11:34 +01:00
serial_bcm283x_pl011.c doc: replace @return by Return: 2022-01-19 18:11:34 +01:00
serial_bcm6345.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_coreboot.c x86: Make coreboot sysinfo available to any x86 board 2021-03-27 13:59:37 +13:00
serial_cortina.c dm: treewide: Rename ofdata_to_platdata() to of_to_plat() 2020-12-13 16:51:09 -07:00
serial_efi.c efi: serial: Support arrow keys 2021-12-31 06:45:01 +01:00
serial_htif.c serial: Add RISC-V HTIF console driver 2022-02-10 11:18:12 +08:00
serial_intel_mid.c serial: Update NS16550_t and struct NS16550 2021-01-05 12:24:40 -07:00
serial_linflexuart.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_lpuart.c Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig 2021-12-27 16:20:18 -05:00
serial_mcf.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
serial_meson.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_mpc8xx.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
serial_msm.c WS cleanup: remove trailing white space 2021-09-30 08:08:56 -04:00
serial_msm_geni.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_mt7620.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_mtk.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_mvebu_a3700.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_mxc.c serial: mxc: enable the RX pipeline 2022-09-18 22:56:10 +02:00
serial_npcm.c serial: npcm: Add support for Nuvoton NPCM SoCs 2022-05-05 09:28:47 -04:00
serial_ns16550.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
serial_nulldev.c serial: remove nulldev_serial_input 2022-02-09 12:30:13 -07:00
serial_octeon_bootcmd.c serial: serial_octeon_bootcmd.c: Add PCI remote console support 2021-04-23 21:22:55 +02:00
serial_octeon_pcie_console.c serial: serial_octeon_pcie_console.c: Add PCI remote console support 2021-04-23 21:22:55 +02:00
serial_omap.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_owl.c dm: treewide: Rename ofdata_to_platdata() to of_to_plat() 2020-12-13 16:51:09 -07:00
serial_pic32.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_pl01x.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_pl01x_internal.h dm: treewide: Rename ofdata_to_platdata() to of_to_plat() 2020-12-13 16:51:09 -07:00
serial_rockchip.c rockchip: serial: rename U_BOOT_DRIVER name to rockchip_uart 2022-04-18 11:25:13 +08:00
serial_s5p.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_sbi.c serial: Add a debug console using the RISC-V SBI interface 2021-10-07 16:08:23 +08:00
serial_semihosting.c serial: smh: Fake tstc 2022-06-06 18:01:21 -04:00
serial_sh.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
serial_sh.h sh: sh3: Remove CPU support 2019-05-10 22:43:18 +02:00
serial_sifive.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_sti_asc.c WS cleanup: remove trailing empty lines 2021-09-30 08:08:56 -04:00
serial_stm32.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_stm32.h dm: treewide: Rename ..._platdata variables to just ..._plat 2020-12-13 16:51:09 -07:00
serial_uniphier.c dm: treewide: Rename auto_alloc_size members to be shorter 2020-12-13 08:00:25 -07:00
serial_xen.c WS cleanup: remove trailing empty lines 2021-09-30 08:08:56 -04:00
serial_xuartlite.c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
serial_zynq.c serial: zynq: Use DIV_ROUND_CLOSEST() to calcurate divider value 2022-07-26 08:23:55 +02:00
usbtty.c serial: usbtty: Send urb data in correct order 2021-03-03 04:12:45 +01:00
usbtty.h arm: Remove PXA architecture support 2022-07-07 09:29:08 -04:00