u-boot/arch/arm/include/asm/arch-sunxi
Dave Prue 6ff005cf19 sunxi: Fix CONFIG_SUNXI_GMAC references
SUNXI_GMAC was still used to configure the code where as the
same has been renamed and moved to Kconfig in below commit
"sunxi: Move SUNXI_GMAC to Kconfig"
(sha1: 4d43d065db)

Signed-off-by: Dave Prue <dave@prue.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
[Tweek commit message, config_whitelist.txt, build-whitelist.sh]
Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-09-01 20:48:27 +05:30
..
boot0.h sunxi: A64: do an RMR switch if started in AArch32 mode 2017-01-04 16:37:42 +01:00
clock.h sunxi: Add support for Allwinner A64 SoCs 2016-04-01 09:52:28 +02:00
clock_sun4i.h sunxi: Add missing macros to configure the NAND controller clk 2016-07-24 20:36:28 -05:00
clock_sun6i.h sunxi: Add clock support for TV encoder 2017-05-15 21:22:57 +02:00
clock_sun8i_a83t.h mmc: sunxi: Support new mode 2017-08-28 22:36:44 +05:30
clock_sun9i.h sunxi: add initial clock setup for sun9i for SPL 2016-10-30 11:38:04 +01:00
cpu.h sunxi: Use H3/A64 DRAM initialization code for R40 2017-04-20 13:30:01 +02:00
cpu_sun4i.h sunxi: Add base address for TV encoder 2017-06-09 15:30:28 +02:00
cpu_sun9i.h sunxi: Add support for SID e-fuses on sun9i 2016-10-30 11:38:04 +01:00
cpucfg.h sunxi: Add CPUCFG debug lock and sun7i cpu power controls 2016-06-20 22:44:00 +02:00
display.h sunxi: video: Split out TVE code 2017-05-15 21:22:24 +02:00
display2.h sunxi: video: Add support for CSC and TVE to DE2 driver 2017-06-09 15:30:47 +02:00
dma.h sunxi: Add DMA definitions 2015-05-29 13:46:36 +02:00
dma_sun4i.h sunxi: Add DMA definitions 2015-05-29 13:46:36 +02:00
dram.h sunxi: makes an invisible option for H3-like DRAM controllers 2017-06-08 22:37:55 +05:30
dram_sun4i.h sunxi: Make DRAM_ODT_EN Kconfig setting a bool 2015-05-19 18:46:44 +02:00
dram_sun6i.h sun6i: Add dram initialization code 2014-11-13 14:49:01 +01:00
dram_sun8i_a23.h sunxi: Make DRAM_ODT_EN Kconfig setting a bool 2015-05-19 18:46:44 +02:00
dram_sun8i_a33.h sunxi: Add a33 dram init code 2015-05-04 16:51:51 +02:00
dram_sun8i_a83t.h sunxi: Add support for LPDDR3 for A83T 2016-01-26 16:20:05 +01:00
dram_sun9i.h sunxi: DRAM initialisation for sun9i 2016-10-30 11:38:04 +01:00
dram_sunxi_dw.h sunxi: Add selective DRAM type and timing 2017-06-08 22:37:55 +05:30
gpio.h sunxi: add basic V3s support 2017-04-21 09:23:17 +02:00
gtbus.h sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
gtbus_sun9i.h sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
i2c.h sunxi: Add support for the I2C controller which is part of the PRCM 2016-01-21 07:30:01 +01:00
lcdc.h sunxi: video: Convert lcdc to use struct display_timing 2017-04-20 13:34:52 +02:00
mmc.h mmc: sunxi: Support new mode 2017-08-28 22:36:44 +05:30
p2wi.h sun6i: Add new p2wi controller driver 2014-11-13 14:49:01 +01:00
pmic_bus.h sunxi: axp: Move axp pmic register helpers to a separate file 2015-05-04 16:51:53 +02:00
prcm.h sunxi: add PRCM secure switch register definition 2017-08-11 15:49:39 +05:30
pwm.h sunxi: display: Use PWM to drive backlight where applicable 2016-08-26 16:58:37 +02:00
rsb.h sunxi: rsb: Move rsb_set_device_mode() call to rsb_init() 2015-02-02 13:55:14 +01:00
spl.h sunxi: Store the device tree name in the SPL header 2017-05-17 23:23:58 +05:30
sys_proto.h sunxi: Fix CONFIG_SUNXI_GMAC references 2017-09-01 20:48:27 +05:30
timer.h sunxi: Fix watchdog reset function for R40 2017-04-20 13:30:00 +02:00
tve.h sunxi: video: Split out TVE code 2017-05-15 21:22:24 +02:00
tzpc.h sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3 2016-01-26 16:20:04 +01:00
usb_phy.h sunxi: musb: Power off OTG port VBUS when disabled 2016-09-17 14:37:40 +02:00
watchdog.h sunxi: Fix watchdog reset function for R40 2017-04-20 13:30:00 +02:00