Commit graph

5144 commits

Author SHA1 Message Date
Adam Ford
2ed45fd6ac ARM: da850-evm: Enable the USB PHY and MUSB Driver
This patch will enable the MUSB driver to support mass storage
devices connected to the OTG port in host mode.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-08 11:35:02 +02:00
Matwey V. Kornilov
ff3dd0a474 configs: rk3328: enable TPL for rock64-rk3328_defconfig
Until now, binary TPL by Rockchip has been required for booting
procedure. Starting from this commit we may use only u-boot to boot
the device.

Note, that using binary TPL instead of U-boot TPL is still working.

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:18:31 +08:00
Kever Yang
8edc29bd88 rockchip: evb-rk3328: enable defconfig options for TPL/SPL
Enable driver options for TPL/SPL in evb-rk3328_defconfig.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from commit df4f40acb4 with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:18:27 +08:00
Nick Xie
a5f1249bd3 arm64: dts: rockchip: Add support for Khadas Edge-Captain
Add devicetree support for Khadas Edge-Captain.
Khadas Captain is the carrier board for Khadas Edge.

Specification
- Rockchip RK3399
- Dual-Channel 2GB/4GB LPDDR4
- SD card slot
- Onboard 16GB/32GB/128GB eMMC
- RTL8211FD 1Gbps
- AP6356S/AP6398S WiFI/BT
- HDMI Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- Full 4 Lane M.2 Socket
- 16MB SPI Flash
- IR
- Programmable MCU

Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2:
"arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards"
(sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e)

Signed-off-by: Nick Xie <nick@khadas.com>
Tested-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:12:23 +08:00
Nick Xie
6ce9ba02b1 arm64: dts: rockchip: Add support for Khadas Edge-V
Add devicetree support for Khadas Edge-V.
Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board.

Specification
- Rockchip RK3399
- Dual-Channel 2GB/4GB LPDDR4
- SD card slot
- Onboard 16GB/32GB/128GB eMMC
- RTL8211FD 1Gbps
- AP6356S/AP6398S WiFI/BT
- HDMI Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- Full 4 Lane M.2 Socket
- 16MB SPI Flash
- IR
- Programmable MCU

Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2:
"arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards"
(sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e)

Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:05:56 +08:00
Nick Xie
a839828fa1 arm64: dts: rockchip: Add support for Khadas Edge
Add devicetree support for Khadas Edge.
Khadas Edge is an expandable Rockchip RK3399 board with goldfinger.

Specification
- Rockchip RK3399
- Dual-Channel 2GB/4GB LPDDR4
- Onboard 16GB/32GB/128GB eMMC
- RTL8211FD 1Gbps
- AP6356S/AP6398S WiFI/BT
- HDMI Out, DP
- USB 3.0, 2.0
- USB Type C power and data
- 16MB SPI Flash
- Programmable MCU

Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2:
"arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards"
(sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e)

Signed-off-by: Nick Xie <nick@khadas.com>
Tested-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:05:29 +08:00
Tom Rini
898c40c0d6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clk
- Port more CCF code to work with i.MX8 devices.
2019-08-02 13:29:46 -04:00
Simon Glass
cf9803a60b Convert CONFIG_AUTOBOOT_MENU_SHOW to Kconfig
This converts the following to Kconfig:
   CONFIG_AUTOBOOT_MENU_SHOW

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02 11:19:14 -04:00
Simon Glass
daedaada38 snow: Define CONFIG_AUTOBOOT_MENUKEY
This option is not used by any boards. To avoid needing to remove it as
dead code, add it to 'snow'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02 11:19:14 -04:00
Simon Glass
8fc31e23aa autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEY
Since this is part of the autoboot functionality, it makes sense to name
it with an AUTOBOOT prefix. No mainline boards use it so this should be
safe, and downstream boards will need to adjust.

Since this option is just an integer value, it really needs another option
to control whether the feature is enabled or not. Add a new
CONFIG_USE_AUTOBOOT_MENUKEY for that. This fits better with how things are
done with Kconfig, avoiding the need to use a specific value to disable
the feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02 11:19:14 -04:00
Simon Glass
37304aaf60 Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig
This converts the following to Kconfig:
   CONFIG_USE_PREBOOT
   CONFIG_PREBOOT

Both are together in one commit, since otherwise the former causes kconfig
to define the latter, which gives duplicate symbol errors.

Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02 11:19:14 -04:00
Simon Glass
9f53146f39 Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig
This converts the following to Kconfig:
   CONFIG_SHOW_BOOT_PROGRESS

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02 11:17:58 -04:00
Tom Rini
bbaf56eda0 - sync Amlogic G12A DT with linux 5.3-rc1
- add support for 4GiB DRAM memory
 - add support for Amlogic G12B based Odroid-N2
 - small duplicate logic fix for gxbb clock driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl1BkXMACgkQd9zb2sjI
 SdGd+Q/+IdXgTvox69NbfvhyA8d7GwhTWVIKgrF3NvHpxYqvvxmC7gTx1Qdh5sAO
 vyKsuygim9R/Rt7X7bzE/a1gKju/DpkxFJ0hx148xDJXmtzeBSWmDO/oOnZpUZRM
 aRUjncjxvMOZ3axtsWAZSiKqDF5i/K9Y3v/6JaLCs3WmVzlLrgANUSWqdC/Qc1Ka
 HLjem/ug3HK+o/zg0pXS3VguOTOMEV63hlWHlo2jKnxLmBpxcp1O7kH8noKR90+P
 x/byo+GAzayYv6oS0yeUz8YEXIMDVdkEX0eFzkRfe7ykz5lwGONdpLcdjmIIk6nO
 Kef7HNsRTb5ku9QPlgVLHodHNeGsV3axvmPLJQDki6/sgQmZSBWsUWPNt0yZuUjT
 gU2o7XoNmIh49hxk8ShDttGkCAYmacJwhQZ0TMV2q8q0YkDmeTWpzY5JIWq5VRLj
 0W9moxSO5SieM0FSwR/v7J2egPrz0ocOSs7XpQqH7ZNduBjq0jHwhS7Yu8wcbXTA
 baBta3tBKJhjYpfPrexrWOw1NW2fwW5kJJpnMY68nDG/ygTb++syVvTjjiqTfemI
 kIs6aBZ0AEo7WMrehdtHRFmW9SQC6h5h0Ji7bR20TigSGLe+5f0R8tASDD+0FXLB
 KID+sigdyHxM9B6uACR1pOqCjEb+IyyFXJno38v7DjaW/IoyC3k=
 =Q5fc
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190731' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- sync Amlogic G12A DT with linux 5.3-rc1
- add support for 4GiB DRAM memory
- add support for Amlogic G12B based Odroid-N2
- small duplicate logic fix for gxbb clock driver
2019-07-31 16:06:24 -04:00
Suniel Mahesh
575ce432b8 configs: am335x_boneblack_vboot_defconfig: Add DM for SPI and Flash devices
This patch adds SPI and SPI_FLASH DM support for verified boot on
TI AM335 chipsets. The following compile warning is removed:

===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

Built and tested on AM335x device (BeagleboneBlack).

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-07-31 13:08:07 -04:00
Suniel Mahesh
a9c5d4ba0d configs: am335x_boneblack_vboot_defconfig: Fix regression by enabling BLK and DM support, disable in SPL
This patch adds BLK and DM support for verified boot on TI AM335x
chipsets. The following compile warnings are removed:

===================== WARNING ======================
This board does not use CONFIG_DM_MMC. Please update
the board to use CONFIG_DM_MMC before the v2019.04 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

BLK and DM_MMC are enabled by default in SPL as well, which is
making the build to break with an overflow(spl image doesn't
fit into SRAM because of size constraints).

  LD      spl/drivers/built-in.o
  LD      spl/u-boot-spl
arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram
arm-linux-ld.bfd: region .sram overflowed by 116 bytes
make[1]: *** [spl/u-boot-spl] Error 1
make: *** [spl/u-boot-spl] Error 2

For the above reason BLK and DM_MMC is disabled in SPL.
Built and tested on AM335x device (BeagleboneBlack).

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-07-31 13:08:07 -04:00
Suman Anna
5b56a4c162 configs: j721e_evm_a72: Disable K3_SYSTEM_CONTROLLER
The K3 System Controller driver is used for loading and starting
the System Firmware, and is used only on R5 SPL. It need not be
enabled and built for the A72 U-Boot and SPL, so disable it from
the j721e_evm_a72 defconfig.

While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and
CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A72 SPL.

Signed-off-by: Suman Anna <s-anna@ti.com>
2019-07-31 13:08:07 -04:00
Suman Anna
8162e8ac70 configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER
The K3 System Controller driver is used for loading and starting
the System Firmware, and is used only on R5 SPL. It need not be
enabled and built for the A53 U-Boot and SPL, so disable it from
both the GP and HS AM65x A53 defconfigs.

While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and
CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A53 SPL.

Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-31 13:08:07 -04:00
Adam Ford
3cdecb341e ARM: da850-evm: Replace CMD_SF with CMD_MTD
This patch enables MTD and CMD_MTD and it works with SPI NOR,
so the older CMD_SF can be removed.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31 13:08:07 -04:00
Adam Ford
ef97842b43 ARM: da850evm: Split MTDPARTS into SPL and u-boot
The MTDPARTS currently lists just u-boot.ais as 512k in size.
This works when loading the ais file via serial port, but if one
wanted to update just the u-boot portion, it's not really possible.
This patch splits the MTDPARTS into a 32k SPL partiion and a 480k
u-boot partition which allows u-boot.img to be burned to the u-boot
partition.  The remaining partitions are left with the same sizes
and offsets to not break backwards compatibility.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31 13:08:07 -04:00
Sam Protsenko
914694d6a9 configs: am57xx_evm_defconfig: Enable 'dtimg' command
We are going to implement DTBO partition for BeagleBoard X15 further. To
support this, 'dtimg' command must be enabled.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31 13:08:07 -04:00
Sam Protsenko
29e783d672 configs: am57xx_evm_defconfig: Enable 'bcb' command
It is essential to have an access to BCB area of 'misc' partition on
Android devices [1]. For BeagleBoard X15 the 'bcb' command will be
further used for reboot reason implementation and booting to recovery.
It can be also used for debugging reasons, like checking RescueParty
messages in BCB area.

[1] doc/android/bcb.txt

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31 13:08:07 -04:00
Neil Armstrong
b160fac9f7 board: amlogic: add support for Odroid-N2
ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd
with the following specifications:

 - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
 - 4GB DDR4 SDRAM
 - Gigabit Ethernet
 - HDMI 2.1 4K/60Hz display
 - 40-pin GPIO header
 - 4 x USB 3.0 Host, 1 x USB OTG
 - eMMC, microSD
 - Infrared receiver

The board directory is W400, the name of the Amlogic Reference Design
of Amlogic G12B with Gigabit boards, which will be used for similar
boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31 12:10:58 +02:00
Peng Fan
7bd6432210 configs: sandbox: Enable composite clk
Enable composite clk for sandbox test

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31 09:20:51 +02:00
Luca Ceresoli
ac80ac09c8 arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit
Avnet UltraZed-EV Starter Kit is composed by the UltraZed-EV SoM and the
only publicly-available compatible carrier card. The SoM is based on the EV
version of the Xilinx ZynqMP SoC+FPGA.

The psu_init_gpl.c file has been generated from the board definition files
at [0] using Vivado 2018.3 and then minimized by
tools/zynqmp_psu_init_minimize.sh. Manually removed serdes init code since
it is not mentioned in device tree and fixed a checkpatch error.

[0] 3686c9ff7d/ultrazed_7ev_cc/1.1

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30 10:20:06 +02:00
Michal Simek
420d446781 arm64: zynqmp: Rename zc1275 to zcu1275
Name of this platform has changed and released to customers that's why
name has also changed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Series-to: uboot
2019-07-30 10:20:06 +02:00
Tom Rini
333755ef7b Merge branch '2019-07-29-ti-imports'
- More DaVinci DM migration, drop am18xx EVM platform
- Keystone bug fix
2019-07-29 17:59:15 -04:00
Bartosz Golaszewski
f99bf3b06c davinci: omapl138-lcdk: enable driver-model in SPL
Enable CONFIG_SPL_DM and enable the driver model for serial by defining
an appropriate device in the board file for da850-lcdk.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
ead10ed1e8 davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF
We're working towards enabling the driver-model in SPL for da850-lcdk.
Enable CONFIG_USE_TINY_PRINTF in defconfig to reduce SPL size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
31a3d91144 davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
We're working towards enabling the driver model in SPL for da850-lcdk.
Enable SPL_SYS_MALLOC_SIMPLE in defconfig to reduce SPL size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
95cffd9906 davinci: da850-evm: enable driver model for NAND
Enable the driver-model on da850-evm. We need to add a dummy nand node
to the device tree, as the real nand node is a sub-node of the aemif
device.

On linux the aemif driver populates all its child nodes, but we can't do
it in u-boot currently.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
f5a47554e0 davinci: omapl138-lcdk: enable driver model for NAND
Enable the driver-model on da850-lcdk. We need to add a dummy nand node
to the device tree, as the real nand node is a sub-node of the aemif
device.

On linux the aemif driver populates all its child nodes, but we can't do
it in u-boot currently.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
3d25b33ad6 omapl138_lcdk_defconfig: don't build support for SPI
The following warning is emited when building u-boot for da850-lcdk:

===================== WARNING ======================
This board does not use CONFIG_DM_SPI. Please update
the board before v2019.04 for no dm conversion
and v2019.07 for partially dm converted drivers.
Failure to update can lead to driver/board removal
See doc/driver-model/MIGRATION.txt for more info.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

While we could fix it by selecting CONFIG_DM_SPI, there's no need to
build it at all as SPI is disabled on da850-lcdk. Remove all unneeded
options from the defconfig.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
3ec7fc45e5 sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon
remove it altogether. Stop building it in sandbox mode.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
ea4cc39c9e davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
This option is no longer used on any davinci board but still selected
in defconfigs which causes the following warning:

===================== WARNING ======================
This board uses CONFIG_DM_I2C_COMPAT. Please remove
(possibly in a subsequent patch in your series)
before sending patches to the mailing list.
====================================================

Remove all references to CONFIG_DM_I2C_COMPAT from davinci.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29 17:58:52 -04:00
Adam Ford
8dd75d3a8d ARM: da850_am18xxevm: Remove config and references
This board has been abandonded for a while.  I do not have this hardware
and nobody has appeared to notice and/or care that it's orphaned.
Since much of this code is inserted into the da850evm code base, removing
it from support will make da850evm support easier going forward.
This patch removes the da850_am18xxevm_defconfig, README references to this
board and the reference to this board from the MAINTAINERS list.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-29 17:58:47 -04:00
Tom Rini
2d64a0f7e9 Merge branch '2019-07-29-master-imports'
- Assorted bug fixes
2019-07-29 11:51:17 -04:00
Heiko Schocher
a7e6d0c45a rtc: move RTC_RX8025 to Kconfig
move RTC_RX8025 to Kconfig and fixup board configs.

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29 09:32:11 -04:00
Fabien Parent
bb4c5d6055 board: mediatek: Add pumpkin board support
The pumpkin board is made by Gossamer Engineering and is using
a MediaTek SoC. The board currently comes in two available version:
MT8516 SoC and MT8167 SoC.
The board provides the following IOs: eMMC, NAND, SD card, USB type-A,
Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in),
serial over USB, and an expansion header.

Additionally there is a HDMI port, DSI port, and camera port only
on the MT8167 version of the board.

The board can be powered by battery and/or via a USB Type-C port and
is using a PMIC MT6392.

The eMMC and NAND are sharing pins and cannot be used together.

This commit is adding the basic boot support for the Pumpkin MT8516
board on the eMMC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29 09:32:11 -04:00
Tom Rini
92430b8fc8 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpga
- Various gen5 fixes
2019-07-29 09:03:11 -04:00
Igor Opaniuk
6be815d6dd configs: colibri-imx6ull: switch to DM_VIDEO
Use CONFIG_DM_VIDEO=y by default for Colibri iMX6ULL.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29 00:12:13 +02:00
Igor Opaniuk
2b600bb833 configs: colibri_imx7: enable DM_VIDEO
Enable DM_VIDEO support for Colibri iMX7 NAND version.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29 00:11:42 +02:00
Igor Opaniuk
632e9af551 colibri_vf: enable DM_VIDEO
Enable DM_VIDEO for Colibri VF.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29 00:10:12 +02:00
Tom Rini
75551c8bfc Merge branch '2019-07-26-ti-imports'
- Bring in the rest of the J271E platform
- Various OMAP3/AM3517, DA850 fixes
2019-07-27 19:50:52 -04:00
Adam Ford
0d54e3bd47 ARM: omap3/omap35_logic: Fix broken Logic PD Torpedo booting
The SOM-LV and Torpedo boards are very similar, but something
happened growing SPL enough to break the Torpedo.  The SOM-LV
board were not doing alias sequencing during SPL and they
continue to work while something broke the Torpedo.  This
patch disables SPL_DM_SEQ_ALIAS allowing it to boot again.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27 13:36:53 -04:00
Adam Ford
7f89cb29ef ARM: da850evm: Remove legacy OHCI referencs and unify platform
OHCI was added with DM_USB support, so there are a few unneeded
items in the header file that can be removed.  This also
unifies da850evm with NOR and NAND booting options so all have
OHCI support.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Migrate da850_am18xxevm]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-27 13:36:53 -04:00
Adam Ford
c94703483c ARM: omap3_logic & omap35_logic: Disable OMAP EHCI for Torpedo
The OMAP35 and AM/DM37 Torpedo boards do not have a USB
tranceiver connected to the USB host port, so this patch
removes it from the defconfig files.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27 13:36:52 -04:00
Tom Rini
df9a7a195b u-boot-imx-20190719
- CCF for i.MX6
 - nandbcb command to write SPL into NAND
 - Switch to DM (i.MX28)
 - Boards: Toradex, engicam, DH
 - Fixes for i.MX8
 - Fixes for i.MX7ULP
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl0y6dgPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3iDYL/AgznVr7kSHoYpSGfBp8pH3R1UdUiQFg437+
 9/wqMJM5Txm1aK7qTW2u5I7qzIpGw0LMPZ7CDQhWJa1Z0hdNWf/1lMzCVOPvCl1v
 C0TK5hx3ufyfgpkGdkPvVXTmn0f8tdiqtS8zQOLVntPe5dIuOySS0MbD9K4Xewfm
 sVYO0p6F1q+EHbRGw33kIX3/ST8wuj7Iki0AFiZ2hAImHO7UeZP2X3k31kbhs+ZB
 /uhUit3Rn0nc5sIqiiP6Ptfjp8eq13LwWbSwJzezCQssmkTn14z6rrgwUcNuXNlh
 Vi88kJr2ObkFgwUpQCWss+sHzyJQkTX/iLz52FCWB4Ruzr6zGr/4ONLT/iDP0Ydl
 ncO3v8uqLpAeB7kdkt8JRJhq62qihdZc6mdN2YJoCYUZSlR3gxzKmXvT+drglsOi
 B78KoU/MgQ10REQ9IoTRLhQc1gwTF8LJSyfz5hjRGoMhD/Ek5WAQJaMlxDg67Ai8
 HB4lUNjkCV58HdP1+zIWJbbxrDc/lg==
 =LNOs
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190719' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20190719

- CCF for i.MX6
- nandbcb command to write SPL into NAND
- Switch to DM (i.MX28)
- Boards: Toradex, engicam, DH
- Fixes for i.MX8
- Fixes for i.MX7ULP

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-27 09:35:05 -04:00
Tom Rini
222701e157 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- fix for fsl_qspi read timeout (Thomas)
- spi-mem read data size fix (Ye Li)
- SiFive SPI driver, mmc_spi flags (Bhargav, Anup)
- Micron spi-nor parts (Ashish)
- MT7629 spi-mem driver(Weijie)
2019-07-27 09:34:07 -04:00
Adam Ford
9eed1ca15b ARM: am3517-evm: Migrate to SPL_OF_CONTROL
Like the other Logic PD OMAP35/DM37 boards, this board has device
tree enabled for U-Boot.  This patch converts the board to enable
SPL_OF_CONTROL and further shrinks the device tree in SPL to limit
it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP).

There appears to be a bug in minicom so users may need to
switch the minicom terminal emulation to ANSI from VT102 due
to the junk that gets pushed out of the UART on startup.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26 22:24:12 -04:00
Adam Ford
2448e42d73 ARM: am3517-evm: Enable DM_PMIC and DM_REGULATOR functions
The PBIAS regulator is available on OMAP3's, and it's shared on
the AM35, so this patch enables that in U-Boot along with GPIO
based regulators.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26 22:24:11 -04:00
Lokesh Vutla
697a689d76 configs: j721e_evm_a72: Add initial support
Add initial defconfig support for J721e that runs on A72.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[trini: Add MAINTAINERS entry]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-26 22:24:00 -04:00
Lokesh Vutla
f9fe3412c6 configs: j721e_evm_r5: Add initial support
Add initial defconfig support for J721e that runs on R5.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[trini: Add MAINTAINERS file]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-26 22:22:14 -04:00
Lokesh Vutla
54e4311fa1 remoteproc: k3_rproc: Rename to ti_k3_arm64_rproc
k3_rproc driver is specifically meant for controlling an arm64
core using TISCI protocol. So rename the driver, Kconfig symbol,
compatible and functions accordingly.

While at it drop this remoteproc selection for a53 defconfig.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:25 -04:00
Bartosz Golaszewski
e809285d49 net: davinci_emac: convert to using the driver model
Now that we removed all legacy boards selecting TI_EMAC we can
completely convert the driver code to using the driver model.
This patch also updates all remaining users of davinci_emac.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm & da850-evm
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2019-07-25 13:36:13 -05:00
Jianchao Wang
8782122052 Add support for the NXP LS1021A-TSN board
The LS1021A-TSN is a development board built by VVDN/Argonboards in
partnership with NXP.

It features the LS1021A SoC and the first-generation SJA1105T Ethernet
switch for prototyping implementations of a subset of IEEE 802.1 TSN
standards.

Supported boot media: microSD card (via SPL), QSPI flash.

Rev. A of the board uses a Spansion S25FL512S_256K serial flash, which
is 64 MB in size and has an erase sector size of 256KB (therefore,
flashing the RCW would erase part of U-Boot).

Rev. B and C of the board use a Spansion S25FL256S1 serial flash, which
is only 32 MB in size but has an erase sector size of 64KB (therefore
the RCW image can be flashed without erasing U-Boot).

To avoid the problems above, the U-Boot base address has been selected
at 0x100000 (the start of the 5th 256KB erase sector), which works for
all board revisions. Actually 0x40000 would have been enough, but
0x100000 is common for all Layerscape devices.

eTSEC3 is connecting directly to SJA1105 via an RGMII fixed-link, but
SJA1105 is currently not supported by uboot. Therefore, eTSEC3 is
disabled.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>

[Vladimir] Code taken from https://github.com/openil/u-boot (which
itself is mostly copied from ls1021a-iot) and adapted with the following
changes:

- Add a008850 errata workaround
- Converted eTSEC, MMC to DM to avoid all build warnings
- Plugged in distro boot feature, including support for extlinux.conf
- Added defconfig for QSPI boot
- Added the board/freescale/ls1021atsn/README.rst for initial setup
- Increased CONFIG_SYS_MONITOR_LEN so that the SPL malloc pool does not
  get overwritten during copying of the u-boot.bin payload from MMC to
  DDR.
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25 13:13:31 -05:00
Bin Meng
f588b4d205 arm: ls1021atwr: Convert to use driver model TSEC driver
Now that we have added driver model support to the TSEC driver,
convert ls1021atwr board to use it.

This depends on previous DM series for ls1021atwr:
http://patchwork.ozlabs.org/patch/561855/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

[Vladimir] Made the following changes:
- Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi
- Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 -
  a mistake ported over from Linux. Each SGMII PCS lies on the private
  MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS).
- Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs
- Completely removed non-DM_ETH support from ls1021atwr
- Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio"
  and from "fsl,tsec" to "fsl,etsec2" to match Linux
2019-07-25 13:13:31 -05:00
Alex Marginean
9b844314fd configs: ls1028a: enable networking options in rdb, qds defconfig
Enables ethernet, MDIO, PHY drivers for LS1028A RDB and QDS.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25 13:13:30 -05:00
Weijie Gao
1f174689c1 spi: Drop obsolete mtk_qspi driver references
Since u-boot has added the spi-mem framework and replaced
the spi-nor framework, the mtk_qspi is no longer compatible
with the new spi-nor driver.

Remove this driver along with replacing config item
with new mtk spi-nor driver.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
[jagan: squash related changes and update commit message]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-25 18:52:20 +05:30
Ruslan Trofymenko
31a38799d5 test/py: Add base test case for A/B updates
Add sandbox test for 'ab_select' command.

Test: ./test/py/test.py --bd sandbox --build -k test_ab

Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alistair Strachan <astrachan@google.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-24 13:16:29 -04:00
Tom Rini
ff8c23e784 - add rtc driver for stm32mp1
- add remoteproc driver for stm32mp1
 - use kernel qspi compatible string for stm32
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdNrGIAAoJEOKyvdngqpN1SVQH+gKENb24GRDN0VReylxbAB+v
 eEIN51GdnmwV2nxDAcpswUF9Vsf4rE5ZNO4qFDubvFEIltMknE6VBi1ywSqQKI4P
 Ft8xHX/xvTJ8hppVrCf0/nWCcULBesknbFncTlyey0AHUoqamKdQknp5wV7eC6sI
 IqpLV09i1Ftswc7XhYLpCsYpfmv15iGtZnvVtUAN1c/ArM9T1ZrApXrnJ/R3+/Xc
 ih0LMJr2tfEOHBEn03WcB9bMKmEqytQEv70nVcZ15ORw7Wh1vL+Lu5EGNv5HazF3
 AY/PnQ2P+J2v2OgrKjhEl7sUGDVBcanqchiaJzdnjYqy3uGXaJngNAV7hMqpsV4=
 =C8bt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190723' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- add rtc driver for stm32mp1
- add remoteproc driver for stm32mp1
- use kernel qspi compatible string for stm32
2019-07-23 14:16:21 -04:00
Patrick Delaunay
1f99eaff08 rtc: Add rtc driver for stm32mp1
Add support of STM32MP1 rtc driver.
Enable it for basic and trusted configurations.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
2019-07-22 11:04:52 +02:00
Patrick Delaunay
9bb9ad2d63 configs: stm32mp15: enable stm32 remoteproc
Activate the remote processor support for stm32mp15 configs.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22 11:04:31 +02:00
Tom Rini
79ea03b38a Merge tag 'rockchip-for-v2019.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- rk3399 lpddr4 support
- rk3399-rock960 board support improvement
- Eliminate pyelftools dependency by make_fit_atf.py
- clean up rockchip dts to use -u-boot.dtsi
- use ARM arch/generic timer instead of rk_timer
- clean up Kconfig options for board support
2019-07-21 15:40:21 -04:00
Simon Goldschmidt
a8b5031108 spl: kconfig: separate sysreset and firmware drivers from misc
This adds separate kconfig options for drivers/sysreset and
drivers/firmware.

Up to now, CONFIG_SPL_DRIVERS_MISC_SUPPORT added drivers/misc to SPL
build but also added drivers/firmware and drivers/sysreset at the same
time.

Since that is confusing, this patch uses CONFIG_SPL_SYSRESET for
drivers/sysreset and adds CONFIG_SPL_FIRMWARE for
drivers/firmware (and accordingly for the TPL options).

CONFIG_SPL_DRIVERS_MISC_SUPPORT stays for including drivers/misc into
the SPL build (and accordingly for TPL) since there are boards using
non-DM (non UCLASS_MISC) files from drivers/misc. Such boards don't
have CONFIG_SPL_MISC enabled, so cannot use this to include
drivers/misc into the SPL build.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-21 12:47:13 +02:00
Kever Yang
1dea50fb22 rockchip: evb-px5: switch to use ARM generic timer
Default to use ARM generic timer in ARM64, switch from
rk timer to generic timer.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
08b902dc39 rockchip: rk3368-lion: switch to use ARM generic timer
Default to use ARM generic timer in ARM64, switch from
rk timer to generic timer.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
ccdcdbb507 rockchip: rk3288: enable TPL for evb-rk3288
Enable TPL for evb-rk3288 so that we can have a free size limited
SPL.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
443fe40e8b rockchip: rk3288: add default TPL_LDSCRIPT value in Kconfig
We share the same TPL_LDSCRIPT for all rk3288 board, add
default value in Kconfig.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
d7f2d23ce4 rockchip: rk3368: default enable SPL LIBCOMMON and LIBGENERIC
We needs SPL LIBCOMMON and LIBGENERIC for all boards,
so we can enable them by default and no need to define
in each board.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
1cdb614845 rockchip: rk322x: default enable SPL LIBCOMMON and LIBGENERIC
We needs SPL LIBCOMMON and LIBGENERIC for all boards,
so we can enable them by default and no need to define
in each board.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
747e127535 rockchip: rk3328: default enable SPL LIBCOMMON and LIBGENERIC
We needs SPL LIBCOMMON and LIBGENERIC for all boards,
so we can enable them by default and no need to define
in each board.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
a13f870ad4 rockchip: rk3399: default enable SPL LIBCOMMON and LIBGENERIC
We needs SPL LIBCOMMON and LIBGENERIC for all boards,
so we can enable them by default and no need to define
in each board.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
8ef62a4aab rockchip: rk3368: use defaule value for SYS_MALLOC_F_LEN
There is no difference in rk3368 board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
cb32a91fbf rockchip: rk3328: use defaule value for SYS_MALLOC_F_LEN
There is no difference in rk3328 board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
d0ae3bc4d6 rockchip: rk3399: use default value for SYS_MALLOC_F_LEN
There is no difference in rk3399 board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
9489b5c7ba rockchip: rk3288: use default value for SYS_MALLOC_F_LEN
There is no difference in rk3288 board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
e3d83d8e54 rockchip: rk322x: use defconfig for SYS_MALLOC_F_LEN
There is no difference in rk322x board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Jagan Teki
ecd8136e52 configs: rock-pi-4: Enable LPDDR4 support
Due to foot-print issues, we have LPDDR4 code can be
marked as CONFIG_RAM_RK3399_LPDDR4.

So, enable it for Rock-PI-4 board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21 00:00:38 +08:00
Jagan Teki
f0e0ab7727 configs: rockpro64: Enable LPDDR4 support
Due to foot-print issues, we have LPDDR4 code can be
marked as CONFIG_RAM_RK3399_LPDDR4.

So, enable it for Rockpro64 board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21 00:00:35 +08:00
Ludwig Zenz
4a6f5b4f56 ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
This patch enables DM I2C for DHCOM i.MX6 PDK2 boards and
removes non DM I2C code. The I2C EEPROM with ethaddr (MAC)
is defined in the device tree. Use UCLASS_I2C_EEPROM
to find the device by fixed hardware path and read the ethaddr.

Tested with DHCOM i.MX6dl and DHCOM i.MX6q.

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-19 20:32:24 +02:00
Lukasz Majewski
07b19e35b5 config: imx53: Disable support for EFI on HSC|DDC boards
This patch disables support for running EFI applications on HSC|DDC boards.
As a result - considerable size reduction (~14%) has been observed (for
for u-boot-dtb.imx 475KiB to 407KiB).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19 20:32:24 +02:00
Ludwig Zenz
8039211a8a ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs
Configure fitImage for U-Boot with a device tree for imx6 quad/dual
and duallite/solo. This enables to support the imx6 derivates
quad/dual/duallite/solo with a single binary.

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-19 20:32:24 +02:00
Marek Vasut
4ca99fe81a ARM: imx: dh-imx6: Enable DM regulator
Enable DM support for regulators and fixed regulator driver and
convert USB Vbus control over to the regulators defined in DT.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
Tested-by: Ludwig Zenz <lzenz@dh-electronics.com>
2019-07-19 20:14:50 +02:00
Igor Opaniuk
9358e5b3b4 colibri_imx7: introduce androidboot wrapper
1. Introduce androidboot wrapper for booting AOSP.
2. Add partitions_android env var for simplifying the process of
writing new gpt table from U-boot shell/fastboot.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-19 20:14:50 +02:00
Igor Opaniuk
cf35ea1011 colibri/apalis imx: drop DFU support
We never really added a sensible DFU configuration for platforms
based on eMMC. Most of the things one might want to do can also be done
with UMS or fastboot, so drop the DFU configuration.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
2019-07-19 20:14:50 +02:00
Igor Opaniuk
fcc79eee14 colibri_imx7_emmc: enable CONFIG_ARMV7_BOOT_SEC_DEFAULT
Enable CONFIG_ARMV7_BOOT_SEC_DEFAULT by default to avoid a kernel
crash when booting NXP linux kernels in non-secure world,
when job ring device allocation is done by CAAM hw accelerator driver:

caam 30900000.caam: job rings = 3, qi = 0
caam_jr 30901000.jr0: failed to flush job ring 0
caam_jr: probe of 30901000.jr0 failed with error -5
caam_jr 30902000.jr1: failed to flush job ring 1
caam_jr: probe of 30902000.jr1 failed with error -5
caam_jr 30903000.jr2: failed to flush job ring 2
caam_jr: probe of 30903000.jr2 failed with error -5
caam algorithms registered in /proc/crypto
Job Ring Device allocation for transform failed
caam 30900000.caam: caam pkc algorithms registered in /proc/crypto
Unable to handle kernel NULL pointer dereference at virtual address 00000010
pgd = c0004000
[00000010] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted:
Hardware name: Freescale i.MX7 Dual (Device Tree)
task: ec0d8000 task.stack: ec0ce000
PC is at caam_sm_startup+0x3f8/0x4f4

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-19 20:14:50 +02:00
Joris Offouga
e4258ddd59 pico-imx7d: Enable DM_USB
This patch enable usb support with device-tree

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
2019-07-19 20:14:50 +02:00
Marek Vasut
9ac5dda519 ARM: imx: m53menlo: Convert WDT support to DM
Enable DM Watchdog support on iMX53 M53Menlo.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-07-19 20:14:50 +02:00
Lukasz Majewski
eec9a8998d ARM: display5: Increase the pre-relocation malloc pool size to 4KiB
Porting more DTS code from Linux kernel for display5 board required
increase of pre-relocation malloc pool size in U-Boot proper.

The early malloc memory is necessary for handling parsing and setup of
e.g. serial port device (and all its ancestors in DT tree).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-07-19 20:14:50 +02:00
Shyam Saini
3df45ded67 configs: icorem6: Enable Nand bcb command
This would be used for writing spl images along nand BCB

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-07-19 20:14:50 +02:00
Shyam Saini
7a9a246c0d configs: icore: Fix U-Boot proper loading from nand
SPL on Engicam i.Core M6 boards enabled DM, so it would require some
malloc() pool before relocation in order to load U-Boot proper properly.

So, enable SPL malloc() pool of 0x2000 size similarly like what we have
used for icore mmc defconfigs.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-07-19 20:14:50 +02:00
Heiko Schocher
e0f0657ddf pwm: imx: add Kconfig support
add Kconfig support for this driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Martyn Welch <martyn.welch@collabora.co.uk>
2019-07-19 20:14:50 +02:00
Lukasz Majewski
2e8f9138d8 ARM: imx: config: Disable support for USB on MCCMON6
The IMX6Q based MCCMON6 is not using USB for any purpose.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19 20:14:50 +02:00
Bryan O'Donoghue
fac5217a75 warp7_bl33: configs: Enable CONFIG_OF_LIBFDT_OVERLAY
This commit enables CONFIG_OF_LIBFDT_OVERLAY a requirement to perform a
merge of an OPTEE provided DTB overlay into our main kernel DTB image.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2019-07-19 15:21:44 +02:00
Bryan O'Donoghue
cf02d5aec5 warp7_bl33: configs: Enable CONFIG_OF_LIBFDT
In order to switch on DTB overlay support in WaRP7 BL33 we first need to
switch on LIBFDT support. Do that now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2019-07-19 15:21:38 +02:00
Bryan O'Donoghue
f32877694b warp7_bl33: configs: Enable FIT as the boot.scr format
This patch switches on FIT verification of boot.scr. After this commit your
boot.scr must be in the FIT format.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2019-07-19 15:20:49 +02:00
Peng Fan
d70c0fce67 imx: imx8dx/qxp: enable thermal
Add thermal dts node
Enable thermal in defconfig

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-19 15:17:13 +02:00
Bryan O'Donoghue
65c0040ede warp7: configs: bl33: Tidy up OPTEE defines
When booting in BL33 mode i.e. with u-boot loaded by OP-TEE we get the
following print-out.

Board: WARP7 in secure mode OPTEE DRAM 0xa0000000-0xa0000000

This is incorrect the right range is 0x9e000000-0xa0000000. This patch
fixes the defines on the warp7_bl33_defconfig file to tidy up the output.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2019-07-19 15:13:51 +02:00
Adam Ford
0749bbb5c7 ARM: imx6q_logic: Enable SPL_DM with SPL_OF_CONTROL
With the spl code correctly returning either MMC1 or MMC2,
this board can not boot either from internal eMMC (MMC1) or
the uSD card on the baseboard (MMC2) using the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-19 14:54:03 +02:00
Lukasz Majewski
3c944f206f defconfig: sandbox: Enable SANDBOX_CLK_CCF to reuse generic CCF code
Enable by default the Common Clock Framework [CCF] clock code for sandbox.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19 14:50:30 +02:00
Anup Patel
9f2a0c0f38 riscv: sifive: fu540: Setup ethaddr env variable using OTP
This patch extends SiFive FU540 board support to setup ethaddr
env variable based on board serialnum read from OTP.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19 14:24:52 +08:00
Peter Robinson
21c0a939ff configs: rockchip: rock960: enable USB3 support
Enable USB3 support via the dwc3 XHCI driver.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19 11:11:09 +08:00
Peter Robinson
a6a056b9a6 configs: rockchip: rock960: Add support for USB ethernet adapters
As the Rock960 doesn't have an onboard wired ethernet interface
it's useful to have some common USB wired ethernet devices added
to enable testing.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19 11:11:09 +08:00
Peter Robinson
ab88336380 configs: rockchip: rock960: enable DMA for SDHCI controller
Enable the SDMA controller so the eMMC connected to the SDHCI
controller (sdhci@fe330000) can make use of it.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19 11:11:09 +08:00
Peter Robinson
914bd85b5d configs: rockchip: rock960: enable pmic and regulator commands
We have both PMIC and Regulator functionality so it's useful to
be able to see output and debug with the commands enabled.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19 11:11:09 +08:00
Peter Robinson
6fe736ad0b configs: rockchip: rock960: drop options for non-existent HW
The Rock960 doesn't contain SPI flash so drop related config options.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19 11:11:09 +08:00
Tom Rini
0de8153564 Merge branch '2019-07-17-master-imports'
- Various FS/disk related fixes with security implications.
- Proper fix for the pci_ep test.
- Assorted bugfixes
- Some MediaTek updates.
- 'env erase' support.
2019-07-18 11:31:37 -04:00
Oleksandr Zhadan
80f485f6a4 board: Arcturus: ucp1020: Removing obsoleted stuff
Removed one of the defconfig(obsoleted) file
and unused CONFIG_MMC_SPI definition to avoid confusion
about if this board using non-DM stuff or not.
uCP1020 is completely DM free board, tested and runs well.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-18 11:31:31 -04:00
Weijie Gao
e90f225f8a configs: mt7629_rfb: use arm arch timer instead of mtk timer
This patch changes mt7629_rfb to use ARM's generic arch timer instead of
MediaTek's soc timer.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-18 11:31:31 -04:00
Tom Rini
9a06eb800c Merge branch '2019-07-17-ti-imports'
- Bring in the first three series that we need in order to enhance the
  TI AM65x series support and then later introduce J721E support.
2019-07-18 11:30:30 -04:00
Tom Rini
7c66eb49c5 am335x_boneblack_vboot: Disable asm memcpy/memset in SPL
In order to save a little space in SPL, do not use the asm versions of
memcpy/memset.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-17 22:50:33 -04:00
Joel Stanley
bfb372b83f configs: aspeed: Add HUSH and random ethernet addr
Tests in test/py/tests/test_env.py like this fail without CONFIG_HUSH_PARSER:

 => => printenv test_env_0
 ## Error: "test_env_0" not defined
 => .=> setenv test_env_0
 => => echo $test_env_0
 $test_env_0
 => F

We also want a mac address so the ethernet device works in qemu.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-17 16:00:17 -04:00
Joel Stanley
5d890b35a6 configs: aspeed: Unset CONFIG_MMC
The aspeed board does not have an upstream MMC driver.

As CONFIG_MMC defaults on, the board would fail to build due to the
CONFIG_DM_MMC migration:

  ===================== WARNING ======================
  This board does not use CONFIG_DM_MMC. Please update
  the board to use CONFIG_DM_MMC before the v2019.04 release.
  Failure to update by the deadline may result in board removal.
  See doc/driver-model/MIGRATION.txt for more info.
  ====================================================

Change the defconfig to disable MMC until a driver is submitted.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-17 16:00:17 -04:00
Andreas Dannenberg
5eb19e0516 configs: am65x_hs_evm: Add support for applying overlays
This will allow for downloading and applying overlays from an MMC/SD
boot media based on the overlay_files ENV variable containing a list
of overlay files.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
623df9cc03 configs: am65x_evm: Add support for applying overlays
This will allow for downloading and applying overlays from an MMC/SD
boot media based on the overlay_files ENV variable containing a list
of overlay files.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
13b569c4b9 configs: am65x_hs_evm_a53: Increase malloc pool before relocation
The malloc pool used before relocation is getting tight leading to
out of memory errors doing certain DM-related calls. Since we are
running the A53 SPL out of DDR let's just go ahead and bump its size
as used in U-Boot proper as well as SPL (via Kconfig default value)
from 8KB to 32KB.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
2fcaae62f0 configs: am65x_evm_a53: Increase malloc pool before relocation
The malloc pool used before relocation is getting tight leading to
out of memory errors doing certain DM-related calls. Since we are
running the A53 SPL out of DDR let's just go ahead and bump its size
as used in U-Boot proper as well as SPL (via Kconfig default value)
from 8KB to 32KB.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
8f26b041e0 configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driver
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander
which includes support for the TCA9554/PCA9554-type expander found
on the AM654 EVM base board.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
e5e5c7608a configs: am65x_evm_a53: Enable PCA953X-type GPIO driver
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander
which includes support for the TCA9554/PCA9554-type expander found
on the AM654 EVM base board.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
7b6aed5136 configs: am65x_hs_evm_defconfig: Enable I2C support
Enable I2C via driver model as well as the associated set of U-Boot
commands to allow us interacting with various I2C slave devices.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
2160ba26f1 configs: am65x_evm_defconfig: Enable I2C support
Enable I2C via driver model as well as the associated set of U-Boot
commands to allow us interacting with various I2C slave devices.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
1bc54fc0af configs: am65x_hs_evm: Add Support for eMMC boot
Add configs to support RAW boot mode in eMMC.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17 11:12:54 -04:00
Faiz Abbas
0e9135c8ce configs: am65x_evm: Add Support for eMMC boot
Add configs to support RAW boot mode in eMMC.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17 11:12:54 -04:00
Andreas Dannenberg
64c1c3a485 configs: am65x_hs_evm_r5: All sysfw to be loaded via MMC
Enable all the relevant configs that enables support for loading
sysfw via MMC.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-17 11:12:54 -04:00
Andreas Dannenberg
208ec9fb8e configs: am65x_evm_r5: All sysfw to be loaded via MMC
Enable all the relevant configs that enables support for loading
sysfw via MMC.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17 11:12:54 -04:00
Andreas Dannenberg
b3b1ed4bca armv7R: K3: am654: Use full malloc implementation in SPL
Switch to using the full malloc scheme in post-relocation SPL to allow
better utilization of available memory for example by allowing memory
to get freed. Initially allocate a 16MB-sized region in DDR starting
at address 0x84000000 for this purpose.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17 11:12:54 -04:00
Faiz Abbas
c7d7e556f2 configs: am65x_evm_a53: Add Support for creating GPT partitions
Add Support for creating GPT partitions in U-boot.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17 11:12:54 -04:00
Faiz Abbas
c36331ad2d configs: am65x: Add configs to support environment in eMMC
Add configs such that U-boot environment is in eMMC by default.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17 11:12:54 -04:00
Faiz Abbas
5a6098fff0 configs: am65x_evm: Enable CONFIG_REGMAP
Add Support for CONFIG_REGMAP.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
3a1a0dfc39 arm64: dts: k3: Sync sdhci0 node from kernel and change driver name
Sync the sdhci0 node from kernel. This changes the compatible that is
required to be there in the driver. Change the same for the SD card node
which is not yet supported in kernel. This also syncs the main_pmx0 node
as a side effect.

Also change the name of the driver to match the compatible in kernel.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Tom Rini
0e80dda32c Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Beelink-x2 STB support (Marcus)
- H6 DDR3, LPDDR3 changes (Andre, Jernej)
- H6 pin controller, USB PHY (Andre)
2019-07-16 11:19:31 -04:00
Andre Przywara
f96238e253 sunxi: H6: Enable USB for existing boards
So far USB was not enabled for the Allwinner H6 boards, as the PHY
driver was not ready and the clock gates were missing. Since this is now
fixed, let's add the PHY and the OHCI/EHCI drivers to the build, for
all existing H6 boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-16 17:13:15 +05:30
Andre Przywara
770b85a418 sunxi: H6: move LPDDR3 timing definition into separate file
Currently the H6 DRAM driver only supports one kind of LPDDR3 DRAM.
Split the timing parameters for this LPDDR3 configuration  into a
separate file, to allow selecting an alternative later at compile time
(as the sunxi-dw driver does).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-16 17:09:31 +05:30
Grygorii Strashko
c558c50dbb configs: am65x_evm_a53: enable networking
Enable TI K3 AM65x CPSW NUSS driver.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-15 13:32:26 -05:00
Marcus Cooper
a9e19b8ff7 sun8i: h3: Add support for the Beelink-x2 STB
The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot,
2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the
SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a
dual colour LED and an optical S/PDIF connector.

Linux commit details about the sun8i-h3-beelink-x2.dts sync:
"ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2"
(sha1: cc4bddade114b696ab27c1a77cfc7040151306da)

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-15 12:25:32 +05:30
Andre Przywara
9340d8fe8b sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig
The choice of the SPL_TEXT_BASE is not really a decision that should be
specified by each board's defconfig, as this setting is actually
dictated by the SoC's memory map and the BootROM behaviour.

To make this obvious and reduce the clutter in the defconfig files,
let's specify the SoC constraints in the Kconfig stanza.
This allows us to remove these lines from the defconfig files again.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-15 12:25:32 +05:30
Tom Rini
a9a3a37f92 - syscon: add support for power off
- stm32mp1: add op-tee config
 - stm32mp1: add specific commands: stboard and stm32key
 - add stm32 mailbox driver
 - solve many stm32 warnings when building with W=1
 - update stm32 gpio driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdKK2iAAoJEOKyvdngqpN1TvcH/jj1ujNdRKn994R3DqULzFtc
 Y0WGjAciTUuV0d9gZLxPZJwlWfqxLgbmUEBlPJQJe79gaM7kNN0PgAe6GNedFhGk
 UhRR7GgbA7wogorpRo8aLe3XYEqHtgPFkf1nSiNz/AHLBg8SB20VhWcY90Kha9lh
 IJ0GK+lSdCxiyaLBC2nswnI2PS/fl4NfC7KWvujtKZduIDIOHqh5q+39llpejyuw
 WOzL/bEa4ald6JKpxOii2KXNwD1gUDQGmPzADYcIdwzJtx9hft7DBSLC5Nr+ndBz
 72TjpbtfJ/qIurv8HeXYs9mtwnCO3WP+015fog0T0zjZ48BrT1A8C96ezwLOfz0=
 =W3ny
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190712' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- syscon: add support for power off
- stm32mp1: add op-tee config
- stm32mp1: add specific commands: stboard and stm32key
- add stm32 mailbox driver
- solve many stm32 warnings when building with W=1
- update stm32 gpio driver
2019-07-14 09:09:49 -04:00
Tom Rini
2a51e16bd5 configs: Make USE_TINY_PRINTF depend on SPL||TPL and be default
The USE_TINY_PRINTF symbol only changes things within SPL and TPL
builds, so make it depend on that support.  Next, make it default as
within these cases we should rarely have need of more advanced print
formats outside of the debug context.

To do this, in a few cases we need to correct our Kconfig dependencies
as we had cases of non-SPL targets select'ing this symbol.  Finally, in
the case of a few boards we really do need the full printf
functionality.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-13 11:11:29 -04:00
Niel Fourie
6e171b661e ARM: am335x: Add phyCORE AM335x R2 support
Support for Phytech phyCORE AM335x R2 SOM (PCL060) on the Phytec
phyBOARD-Wega AM335x.

CPU  : AM335X-GP rev 2.1
Model: Phytec AM335x phyBOARD-WEGA
DRAM:  256 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
eth0: ethernet@4a100000

Working:
 - Eth0
 - i2C
 - MMC/SD
 - NAND
 - UART
 - USB (host)

Device trees were taken from Linux mainline:
commit 37624b58542f ("Linux 5.1-rc7")

Signed-off-by: Niel Fourie <lusus@denx.de>
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Marek Vasut <marex@denx.de>
2019-07-13 11:11:28 -04:00
David Lechner
1d259e4d68 ARM: legoev3: convert to driver model
This converts LEGO MINDSTORMS EV3 to the driver model. MMC, SERIAL, SPI
and SPI_FLASH are converted.

The device tree contains only the minimal nodes required by U-Boot
since the size of U-Boot is limited to 256K on this device.

Signed-off-by: David Lechner <david@lechnology.com>
2019-07-13 11:11:28 -04:00
Michael Walle
fb9a1ffef3 rtc: add Microcrystal RV-8803 driver
Signed-off-by: Michael Walle <michael@walle.cc>
2019-07-13 11:11:28 -04:00
Derald D. Woods
e74e9f620a ARM: omap3: evm: Enable DM_USB in defconfig
This addresses the following warning message:

===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

As USB support for older OMAP3 SoC's improves, OMAP3 EVM can be
readily adapted. There is some additional 'gpio-hog' support
needed to fully setup USB in a similar manner to Linux.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2019-07-13 11:11:27 -04:00
Ilko Iliev
26eff45737 board: pm9263: Convert to CONFIG_DM_USB and CONFIG_DM_VIDEO
Convert the board to support the USB and video driver model and remove
the unnecessary code.
2019-07-12 10:04:29 -04:00
Ilko Iliev
7a0b1f713e board: pm9261: Convert to CONFIG_DM_USB and CONFIG_DM_VIDEO
Convert the board to support the USB and video driver model and remove
the unnecessary code.
2019-07-12 10:04:29 -04:00
Patrick Delaunay
cc06c5f6cd stm32mp1: add SPI flash support in SPL
Allow boot from NOR with basic boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:53 +02:00
Patrick Delaunay
e81f8d16e2 stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONS
Update kernel MTD partition in device tree with U-Boot information.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:53 +02:00
Patrick Delaunay
152c84bce9 stm32mp1: add configuration op-tee
Add support of Trusted boot chain with OP-TEE
- reserved 32MB at the end of the DDR for OP-TEE

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:52 +02:00
Patrick Delaunay
03cc423d8a stm32mp1: configs: Add CONFIG_OF_SPL_REMOVE_PROPS
Removes unused device tree property in SPL
to reduce the SPL size by 1kB

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:18:53 +02:00
Patrick Delaunay
ca351e705a stm32mp1: deactivate WATCHDOG in defconfig
Deactivate WATCHDOG by default in u-boot to avoid issue to boot kernel
and rootfs without the needed daemon to reload it.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2019-07-12 11:18:53 +02:00
Fabien Dessenne
8da622d818 configs: stm32mp15: enable IPCC mailbox
Activate the ipcc mailbox for stm32mp15 configs.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-12 11:18:53 +02:00
Tom Rini
68deea2308 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- SPL SATA enhancements to allow booting from RAW SATA device
  needed for Clearfog (Baruch)
- Enable SATA booting on Clearfog (Baruch)
- Misc changes to Turris Omnia (Marek)
- Enable CMD_BOOTZ and increase SYS_BOOTM_LEN on crs305-1g-4s
  (Luka)
- Enable FIT support for db-xc3-24g4xg (Chris)
- Enable DM_SPI on Keymile Kirkwood board with necessary changes
  for this (Pascal)
- Set 38x and 39x AVS on lower frequency (Baruch)
2019-07-11 18:09:38 -04:00
Tom Rini
79b8d3c285 UniPhier SoC updates for v2019.10
- import DT updates from Linux
 
 - add UniPhier SPI controller driver
 
 - make U-Boot image for 64bit SoCs position independent
 
 - tidy up various init code for next generation SoCs
 
 - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl0nREIeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG2GMP/2n8xlbLvYKVI5nF
 NP7yn6ZI04pEliuthMZEHxUwOXx7O8luk1NGIOOoTjMJUEO+QGsh9GXwNnhfzL2P
 mtI3Vq5ZZvwpHJPYK9JKze3Dn0apEoUWaqyj2J6s/r3FUmm/k7Y5J3QHLP4fpNG+
 m5cMwxrIPT8oefM/lnF45YDA0VY84SWfHfI39o1qKL+av0VIsN/uzYBwm4uOEyh+
 ZWY4CfL362w6EW03mrTA0RoJUyFmI6Jpcj/dAyU8E4+Fxlu3ZeN9rkUdd6FgVujU
 +JFA/rl/M1iMOAjrkrsknJgTgAEBOXW8zfnflsQS/LXWigC6NgxEXtHg3loAqZQH
 rK+bhWWSbHMkSp4ek0l7owKVhWhiv4TjmStjpVO85Hw0L5hd+La3yv9jRJjjz7Ac
 J3/ROJb/QXItjJr/GU5N6UpBeyWkQXEmueNEKRm3VyQSOjyedFINQ+2hnafCFgcO
 /bJBZUZoNKgj5fK2zUfM/FOsuMGHDb06u3cJfEnS1s5YnDEl2Hr8r/WhUUnYyQZg
 fZP+J/gyZCogrNy/2ijEyPj75b9MQOV9RnatvbirastJNia9hAXI/d3FUCRzVwlp
 5glb84AuiqmFbtCjQZ0kSI8dZI4hwY262ksAPR+yEawNQTU9Ay5uEcYxUq+oj11U
 OWZf9BiDvhCNmHAlX70vWF+M/oYE
 =X9wS
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2019.10

- import DT updates from Linux

- add UniPhier SPI controller driver

- make U-Boot image for 64bit SoCs position independent

- tidy up various init code for next generation SoCs

- misc cleanups
2019-07-11 18:08:44 -04:00
Tom Rini
c76c93a3d5 configs: Rename CONFIG_IMAGE_FORMAT_LEGACY to CONFIG_LEGACY_IMAGE_FORMAT
The name CONFIG_LEGACY_IMAGE_FORMAT reads slightly better along with
allowing us to avoid a rather nasty Kbuild/Kconfig issue down the line
with CONFIG_IS_ENABLED(IMAGE_FORMAT_LEGACY).  In a few places outside of
cmd/ switch to using CONFIG_IS_ENABLED() to test what is set.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-11 14:11:18 -04:00
Pascal Linder
c2cd4ec00c km/spi: activate driver model for SPI flash on KM Kirkwood boards
The corresponding configurations are selected in the common Kconfig file.
This is easier than changing every affected board default configuration
file. The default configuration for the PORTL2 board, however, still needs
some modifications to correctly use the driver model.

Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11 10:58:03 +02:00
Chris Packham
54b8c51ebe ARM: mvebu: Enable FIT support for db-xc3-24g4xg
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11 10:58:03 +02:00
Luka Kovacic
7945436f88 arm: mvebu: crs305-1g-4s: Enable CMD_BOOTZ and increase SYS_BOOTM_LEN
This change enables CMD_BOOTZ and increases SYS_BOOTM_LEN to
make it easier to work with kernel images.

Signed-off-by: Luka Kovacic <me@lukakovacic.xyz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11 10:58:02 +02:00
Tom Rini
a52f1fe408 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-ubi
[trini: Migrate sama5d27_som1_ek_qspiflash/sama5d2_xplained_qspiflash
        for CONFIG_ENV_SECT_SIZE]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-10 13:18:54 -04:00
Masahiro Yamada
92edfff6c6 ARM: uniphier_v8_defconfig: make 64bit SoC image position independent
For a planned new SoC in this SoC family, the base address of the
DRAM will be changed from 0x80000000 to 0x20000000.

The PIE support will be useful to maintain multiple similar SoCs
whose DRAM addresses differ.

Now CONFIG_SYS_TEXT_BASE is not important. I just set it to 0
to ensure CONFIG_POSITION_INDEPENDENT is working.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:37:23 +09:00
Tom Rini
b4944e2574 First set of u-boot-atmel features and fixes for 2019.10 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdJEZEAAoJEB6zHgIOrC/I+LAH/jUDQpF5I68h0ZFGm3xoyGhm
 3CSv8viOm/kL+GLubjnv4cwAp8N8VRpeJekz0Jt1Xp8C6OIgtnJ2Fln72KD+Z0IC
 Rq7ByRS16iq4b6IUDRZObE4Jzxmf7rXU3jr0+/vd/en7kxVlvA9+Gsffs3OTGxC7
 z9PysRZPBMH/smIPXdEQxYifnbpDG4fmfGcUWKrYfkB0Kq6Ep98Ia/gXNCY8XJ/A
 sbNQGjJWJZWXS/TDetcC2VikssJ+yNFF34uzV+HD5Y3DW6ywLhuoDOz1pg8RR36i
 YjcTCQz8lL/UVaUzrGUgPVAC3gdKY6J26GtV3vZavxBcmtGf0FhVtXO/tZc9AsY=
 =6G45
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2019.10-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

First set of u-boot-atmel features and fixes for 2019.10 cycle

This includes the Atmel QSPI driver and support for the at91 boards.
This is the port of the driver from Linux, mostly done by Tudor Ambarus.
2019-07-09 08:17:12 -04:00
Tudor Ambarus
ff352ac853 configs: sama5d27_som1_ek: add qspiflash_defconfig
Add the default config file of QSPI media. The config is based on
sama5d27_som1_ek_mmc_defconfig.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-09 09:26:43 +03:00
Tudor Ambarus
9ee8e7aec7 configs: sama5d2_xplained: add qspiflash_defconfig
Add the default config file of QSPI media. The config is based on
sama5d2_xplained_mmc_defconfig.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-09 09:26:43 +03:00
Tudor Ambarus
e2c4dca97a configs: sama5d27_som1_ek: enable qspi controller and flashes
We use a sst spi-nor flash memory on sama5d27_som1_ek. Select
the others for testing purposes.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-09 09:26:43 +03:00
Tudor Ambarus
8308e32c23 configs: sama5d2_xplained: enable qspi controller and flashes
We have a macronix spi-nor flash on sama5d2_xplained RevB and
a sst spi-nor flash on RevC. Select the rest for testing purposes.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-09 09:26:43 +03:00
Markus Klotzbuecher
4bae76d733 configs: migrate ubispl boards to KConfig
Migrate the ubispl configuration for the omap3_igep00x0 and
am335x_igep003x boards to KConfig. Both boards were built with
SOURCE_DATE_EPOCH=0 and found to be equal before and after.

Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Javier Martínez Canillas <javier@dowhile0.org>
Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
2019-07-09 07:00:24 +02:00
Markus Klotzbuecher
a9221f3ebd at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs
Enable the extended ENV options for AT91 and OMAP2PLUS in order to be
able to use CONFIG_ENV_UBI_* on these architectures.

As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE,
ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to
KConfig.

This migration was run using an extended moveconfig.py which evaluates
expressions such as "(512 << 10)". See patch ("moveconfig: expand
simple expressions").

All modified boards were built with SOURCE_DATE_EPOCH=0 before and
after the change and successfully confirmed that the identical binary
is generated (the only exception was igep00x0, which does not define
CONFIG_ENV_IS_IN_UBI in the original board header. Once that is
defined, the test passes too).

hs: rebased patch to:
  68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT"

Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Tom Rini <trini@konsulko.com>
2019-07-09 07:00:21 +02:00
Markus Klotzbuecher
ff4818cc3e env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND
Introduce the KConfig option CONFIG_ENV_UBI_VOLUME_REDUND for defining
the name of the UBI volume used to store the redundant environment.

Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Cc: Kyungmin Park <kmpark@infradead.org>

hs: get rid of stm32mp1* build errors
2019-07-09 07:00:05 +02:00
Tom Rini
f5e73a34ed Merge tag 'mmc-6-23' of https://github.com/MrVan/u-boot
- Pull in the series to split fsl_esdhc for i.MX/non-i.MX cleanly
2019-07-08 15:59:41 -04:00
Tom Rini
54869e0811 - fix complation error for CONFIG_USB
- update RPi3 DTBs to v5.1-rc6 state
 - add defconfig for RPi3 B+
 - Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEiUuSfQSYnG8EMsBltDliWyzx00MFAl0A9VQSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJELQ5Ylss8dNDyY8P/AsPYLpXkARV1UPaEr9m89uCnrXa0Ggm
 PBFiNUUmM/xRB6J9IQe1YnMio+azVvcpc1AkOTLG7ypgFxAiukfzDS1mnaQye8Mg
 Exq3GgrDZrLp1jXYXSf3EZgIbJhpejHf433frNoJkveq6GTPJpI0mpMsaDVkzy/Q
 jVKm4bLolyXkERIUcOvvhyTwyUJhJv7n6n3+yBMgfssZexhSCzf9nXI7Ds98mxaN
 UNrF6oqvKeICJpvGpfJ+sO4lzaWk/Uc5TEzJ9QnUn0bEePLjJY35H1C5Wmhfo4/L
 KHPGwFTVNvi2byXmht6UK+OWdp1D7NWF+il2dhJUm3kaURkYBVdKAmFd9SpevRX6
 SCsM5spkLeciVIc4keTgZI7yRcvkIq7qul9eCTQnviO/I3h1YykHMgWZjNDkY8ZG
 HhKSKRjpdT+BHq4mWca1Q29cpWwshgC01Vq8Pig/4EOoOSWJ79Y+Qm+xeOwDf2ph
 fRKP40Ves+ER/z+2tAAmj/wuKqD1B8UTIZ4i69lAUei5aSvTwpf1saEV3gIjoaqj
 5fhoCKamsQhXnv0DjYMliXHYZ78EZzZyh6Fr9LHFnlc861IrRawqTPjRuerdjGwd
 jrp/vhwv5regzfDmWGSVo1CCscWvXgf3Tfag2Uwc+u5lXOSgJd8XPZJFiRMGFBon
 fJN1lxjxLRQf
 =0ulJ
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2019.07' of https://github.com/mbgg/u-boot

- fix complation error for CONFIG_USB
- update RPi3 DTBs to v5.1-rc6 state
- add defconfig for RPi3 B+
- Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
2019-07-05 18:19:47 -04:00
Fabio Estevam
5b85858251 wandboard: Add FIT image support
After the transition to DM, only the mx6dl/solo wandboard
is supported.

Add FIT image support so that all the wandboard variants
can be supported, like it was prior to the DM conversion.

Successfully booted Linux on mx6q/solo/qp wandboards.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04 14:19:49 +02:00
Kever Yang
d79036c22d rockchip: config: update config for TPL support on tinker-rk3288
We need to update TEXT BASE for TPL/SPL/U-Boot;
SPL no need relocate STACK after enable TPL, so remove it;
Don't enable pinctrl names so that SPL can get pinctrl dts;

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Shawn Guo
8c2d42d526 poplar: increase SYS_MALLOC_F_LEN for DM_FLAG_PRE_RELOC support
There is a regression seen on Poplar platform, which doesn't even show
a U-Boot version banner on booting.  It turns out that due to landing
of commit 3a7c45f6a7 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
simple-bus driver"), we need to increase SYS_MALLOC_F_LEN from its
default size 0x400, as pre-relocation requires more memory there.  Let's
increase SYS_MALLOC_F_LEN to 0x4000 to fix the regression.

Thanks to Andreas Färber <afaerber@suse.de> for reporting, and Bin Meng
<bmeng.cn@gmail.com> for trouble shooting.

Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2019-07-01 09:35:56 -04:00
Tom Rini
0352e878d2 Fixes for 2019.07
- menlo board
 - allow SDB on Sabre
 - HAB for mx6sl
 - apalis board
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl0VwBcPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3k4AL/iaMEhY5e43krMSmlnWDfS2DsTVpyUBX1Q7X
 JHkuKQ8iH3bBSquwLNFju2hGNK8whCHfsIB5QgSh4uK3JIzWAh+/5TCGXbPDkGMJ
 PI/hyxKy2EB245SMshcJMHbyLK6PeHi4V/WA4WyY2c91Dz/DNx7UhMZOlFm8wyMl
 TwDCwtlqHodz0tXKUziCjSqTfxj7WSThwuyQ0SEHAccglM1MzM1JHq1RcdV7Pjdh
 bDpMC0rjcxYl5MM7gIig5OMtx+26HgP6JM+QfeoEuBm0PbhxV6ZFyHlafb8W/ba0
 SjzMWIknZWYA9GTAkdUgN+E0ChZVID0oSVoVh51eKiOG1z+LpkJEKE7xsaCAeBiQ
 BupLRgd0tBtqVK345EFDCy5UkYrnkLOnI+3JQNZ9bxBoPmKAf6wvhqa9Jf3bc+rP
 iSYh9Lm3sWVlXKcLR4ltS39D48OT8GZqun8zLpZkwpAWxRMuFvR+R7Q+VMVKmEF2
 1dn3EJhMsvbmTj0lYRp+ObEEpJDL9A==
 =DFoX
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2019.07

- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board
2019-06-28 08:00:22 -04:00
Marek Vasut
f0be8ff45f ARM: imx: m53menlo: Convert to DM VIDEO
Enable DM Video support on iMX53 M53Menlo and fix minor details
to restore previous behavior of the system.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-28 00:08:42 +02:00
Marek Vasut
86aa7103b6 ARM: imx: m53menlo: Convert MMC, USB and block to DM
Enable DM block and DM MMC and DM USB support on iMX53 M53Menlo .
Convert board code to match the DM support. This also enables DM
pincontrol to configure the SDHI pins.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:48 +02:00
Marek Vasut
9b352ae1ae ARM: imx: m53menlo: Enable DM GPIO
Enable DM GPIO support on iMX53 M53Menlo and fix up board code where
applicable. Enable MALLOC_F to let the GPIO controllers bind early on.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:37 +02:00
Marek Vasut
26bb95f056 ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux
Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 .
Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi,
the GPIO controllers need to be inited early, otherwise m53_set_clock()
won't be able to detect the correct CPU clock frequency by reading the
GPIO.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:23 +02:00
Jagan Teki
adde32d033 rockchip: rk3399: Enable SPL_BOARD_INIT
Enable SPL_BOARD_INIT globally to rk3399, this would
help to print the SPL banner during bootup.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00
Jagan Teki
2411c335b6 board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0
Right now puma rk3399 board need to copy bl31-rk3399.bin and
rk3399m0.bin into u-boot source directory to make use of building
u-boot.itb.

So, add environment variable
- BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other
  platform BL31 env)
- PMUM0 for rk3399m0.bin

If the builds are not exporting BL31, PMUM0 env, the fit_spl_atf.sh will
notify with warning about which document to refer for more information
like this:

 WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
 Please read Building section in doc/README.rockchip
 WARNING: PMUM0 file rk3399m0.bin NOT found, resulting binary is non-functional
 Please read Building section in doc/README.rockchip

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:27 +08:00
Matwey V. Kornilov
57c4c5d336 rockchip: rk3328: add rock64-rk3328_defconfig
The ROCK64 is a credit card size SBC based on Rockchip RK3328
Quad-Core ARM Cortex A53.

This series allow building u-boot SPL and u-boot.itb for Rock64
board. The proprietary TPL is stil required for deploy:

  ./tools/mkimage -n rk3328 -T rksd \
    -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
  cat ./spl/u-boot-spl.bin >> idbloader.img
  dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
  dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:26 +08:00
Kever Yang
c009aeb8ca rockchip: Kconfig: enable SPL support for rk3328
Enable SPL support and some related option in Kconfig.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from 430b01462b with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2019-06-26 21:11:26 +08:00
Yangbo Lu
e37ac717d7 Convert to use fsl_esdhc_imx for i.MX platforms
Converted to use fsl_esdhc_imx for i.MX platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-23 14:18:34 +08:00
Yangbo Lu
60742bfb53 Move CONFIG_FSL_ESDHC to defconfig
Moved CONFIG_FSL_ESDHC from header files to defconfig files.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-23 14:15:30 +08:00
Tom Rini
5eea874b5e Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- boot failure fix for Intel edison
- tangier wdt conversion to driver model
2019-06-22 12:09:33 -04:00
Andy Shevchenko
c974a3d155 watchdog: tangier: Convert to use WDT class
Convert legacy driver to use watchdog class.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-06-22 22:27:13 +08:00
Tom Rini
f512851413 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21 10:11:23 -04:00
Felix Brack
19b81032d6 arm: am335x-pdu001: Remove watchdog support
This board does not require watchdog support.

Signed-off-by: Felix Brack <fb@ltec.ch>
2019-06-21 10:07:11 -04:00
Oleksandr Zhadan
f51d7fc8ce board: Arcturus: DM: Disable drivers without DM support.
Extra "not DM" controllers support is disabled.
u-boot BSP still good enough to upgrade and run images.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
2019-06-21 10:07:11 -04:00
Tom Rini
f643fb9f4c Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- PCIe driver change to support DM model
- T2080QDS migrated to use PCIe DM model
2019-06-20 09:14:35 -04:00
Tom Rini
e8c185bb15 _ Update STM32MP entry in MAINTAINERS
_ Handle correctly binding for g-tx-fifo-size for USB DWC2 driver
 _ Fix trusted STM32MP1 defconfig with correct ethernet driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAl0KUq0XHHBhdHJpY2Uu
 Y2hvdGFyZEBzdC5jb20ACgkQysd4L3sz/6Y6ZA//fidCjjfPkJgV0lQJeWJDzaoF
 VOtqpSLj9of5SxCfeXV5Ts1ngnSrwRDpGstuER2l7icFq24XnrtaBBGhlGVZ0wvJ
 ft5VDZZo0VehoxN1yMlGrZ9vCNx5V8v5VJVLDneZdDSFIAJD5aioIe5S9EOfJz6F
 oe9uYXxArDNbzuw6YC7de7RDmMNl7pR5DDhaPMuWr12+T1FxzEVUNh0ohWhJxqL8
 tmieg0kDyBKWHSgna8G1JhIJfGmdxsj2RR7nazPt+OduqRuFE24VuEFRvsjEjhmI
 AiUhb4UpGOtXHtP6g4o2q78t77Quu0SqI6RJJEOcsAF7jGnwrcjjQe6W4JDVy5f5
 zh+SObj2frgaMc0s0hM6/StlZQJp6N09FFjn8G+T9RupL/lKeqH+xnJT5asZJdso
 mLyBbxhQhaGBP2QyUNB02t9aiQeOYJ1jCJCC+/iORQ6jPK+qNboTdPmTGfpbR14v
 /IgVbIsOWE6eKu5u/ac2TXZBkEPOLX6wCh6C0qTGLEEp9dh1Y63/bETy/ZpBqu55
 YTLXVVRK2l9cRXZI8CAyBRBNk6VrdAQq+e48A0dvVWvAMDFalr/54JustzEh5VKs
 oNe+oGRTZt/S3MYCnMjvhcaPZOqAxt+V7MQ8yuubn1TSV29ygcilzHySK0IaT2Cj
 WXD/pNKx+h8cu46i+nE=
 =wz3G
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190619' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Update STM32MP entry in MAINTAINERS
- Handle correctly binding for g-tx-fifo-size for USB DWC2 driver
- Fix trusted STM32MP1 defconfig with correct ethernet driver
2019-06-20 09:14:03 -04:00
Hou Zhiqiang
70833d530e configs: T2080QDS: Enable PCIe driver
Enable the DM PCIe driver in T2080QDS defconfig.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20 10:55:22 +05:30
Tom Rini
63a4585791 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- LS1046AFRWY support
- USB errata fix and secure boot defconfig support for LS1028A
- Enabled SDHC and SATA for LX2160
- LS1046A serdes fixes
- other minor fixes
2019-06-19 14:01:11 -04:00
Vabhav Sharma
d90c7ac7a9 armv8: ls1046afrwy: Add support for LS1046AFRWY platform
LS1046AFRWY board supports LS1046A family SoCs. This patch
add base support for this board.
Board support's 4GB ddr memory, i2c, micro-click module,microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Alex Marginean
062d8148f8 arm: ls1028a: define the integrated PCI bus (ECAM)
LS1028A includes an integrated PCI bus with 11 PCI functions residing on
bus 0.  ECAM plus the device register space takes up 256MB of address
space.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Maciej Pijanowski
fd90b6d5ab configs/ls1046ardb_*: disable CONFIG_SPI_FLASH_USE_4K_SECTORS
With this setting enabled, the on-board QSPI cannot be
properly flashed. There are no error messages, but the simple
write / read / compare tests fail.

This is already disabled in the qspi and tfa defconfigs for the
LS1046ARDB platform.

Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Cc: piotr.krol@3mdeb.com
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Ashish Kumar
7494232700 configs: Unset CONFIG_SPI_FLASH_BAR, move CONFIG_FSL_QSPI to defconfig
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Yuantian Tang
a1e126bf8d armv8: ls1028a: Add secure boot defconfig
Add secure boot defconfig for ls1028aqds and ls1028ardb boards.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Patrice Chotard
29dff4d455 configs: stm32mp15: Select correct Ethernet driver for trusted mode
Select the correct Ethernet driver from Synopsis.
Initially, "Synopsys Designware Ethernet MAC" driver was wrongly
selected instead of "Synopsys DWC Ethernet QOS device" driver.

Fixes: commit f90b3f5b68 ("configs: stm32mp15: Enable Ethernet feature")

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-18 16:38:08 +02:00
Tom Rini
c3f43185ee Merge branch 'master' of git://git.denx.de/u-boot-spi
- Drop zipitz2 board (Tom)
- Add DEPRECATED option (Tom)
- Mark legacy or non-dm drivers as DEPRECATED (Jagan)
2019-06-17 11:32:22 -04:00
Tom Rini
8f93213227 Merge branch 'master' of git://git.denx.de/u-boot-sh
- More board removal
2019-06-15 13:02:12 -04:00
Tom Rini
d760a5efb9 configs: Migrate CONFIG_SYS_LDSCRIPT to Kconfig
In order to migrate this symbol to Kconfig introduce a new symbol to
guard it, CONFIG_SYS_CUSTOM_LDSCRIPT.  When that is set we can then
provide the exact final location o the script.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-14 16:10:49 -04:00