Commit graph

45174 commits

Author SHA1 Message Date
Stefan Chulski
f0e970fd2a net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
U-boot use single physical tx queue with size 16 descriptors.
So aggregated tx queue size should be equal to physical tx queue
and cpu descriptor chunk(number of descriptors delivered from
physical tx queue to aggregated tx queue by one chunk) shouldn't be
larger than physical tx queue.

Fix:
Set AGGR_TXQ and CPU_DESC_CHUNK to be 16 descriptors, same as
physical TXQ.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10 08:33:02 +02:00
Stefan Chulski
bb915c843f net: mvpp2x: fix BM configuration overrun issue
Issue:
BM counters were overrun by probe that called per Network interface and
caused release of wrong number of buffers during remove procedure.

Fix:
Use probe_done and num_ports to call init and remove procedure
once per communication controller.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10 08:33:02 +02:00
Stefan Chulski
73f592fb72 net: mvpp2x: Enable GoP packet padding in TX
This patch enables padding of packets shorter than 64B in TX(set by default).
Disabling of padding causes crashes on MACCIATO board.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10 08:33:02 +02:00
Stefan Chulski
377883f16d net: mvpp2x: fix phy connected to wrong mdio issue
A8K marvell SoC has two South Bridge communication controllers(CP0 and CP1).
Each communication controller has packet processor ports and MDIO.
On MACHIATOBin board ports from CP1 are connected to mdio on CP0.

Issue:
Wrong base address is assigned to MDIO interface during probe.

Fix:
Get MDIO address from PHY handler parent base address.

This should be refined in the future when MDIO driver is implemented.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10 08:33:02 +02:00
Stefan Chulski
4189373a3d net: mvpp2x: Add GPIO configuration support
This patch add GPIO configuration support in mvpp2x driver.
Driver will handle 10G SFP gpio reset and SFP TX disable. GPIO pins should
be set in device tree.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10 08:33:02 +02:00
Tom Rini
d529124fdc Merge git://git.denx.de/u-boot-x86 2017-08-08 17:06:19 -04:00
Tom Rini
f0ca30fa19 Merge git://www.denx.de/git/u-boot-cfi-flash 2017-08-08 17:05:47 -04:00
Tom Rini
1f032ce23a Merge git://www.denx.de/git/u-boot-marvell 2017-08-08 17:05:33 -04:00
Tom Rini
1989374b21 configs: Finish migration of PHY_GIGE
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-08 17:02:31 -04:00
Stefan Roese
6a5691e297 x86: Add defconfig for theadorable-x86-conga with PCIe x4 blobs
This defconfig uses the PCIe x4 binary blobs from the congatec BIOS.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-08 21:13:07 +08:00
Stefan Roese
2efd877b0c x86: conga: theadorable-x86-conga-qa3-e3845_defconfig: Misc defconfig updates
- Disable debug UART
- Enable more partition support

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-08 21:13:07 +08:00
Stefan Roese
3038d5c656 x86: conga: conga-qeval20-qa3-e3845_defconfig: Misc defconfig updates
- Enable ACPI resume support
- Disable debug UART
- Enable Spansion and Winbond SPI flash support
- Move VGA BIOS binary address to enable bigger U-Boot images

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-08 21:13:06 +08:00
Stefan Roese
489b51da68 x86: theadorable-x86: Add header file for common defines and env
This patch adds the common header include file theadorable-x86-common.h
for the theadorable-x86 targets to define all common options and the
default environment.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-08 21:13:06 +08:00
Stefan Roese
14a937ffb9 x86: conga: Add option to select different config headers for baseboards
This patch adds the infrastructure to define different config headers
with different configurations and default environment for the baseboards
that can now be selected via Kconfig. The new configuration for the
theadorable-x86-conga-qa3-e3845 is also added. Also the new defconfig
file for this new target is added.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-08 21:13:06 +08:00
Stefan Roese
6b08679328 x86: dfi: Add option to select different config headers for baseboards
This patch adds the infrastructure to define different config headers
with different configurations and default environment for the baseboards
that can now be selected via Kconfig. The new configuration for the
theadorable-x86-dfi-bt700 is also added.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-08 21:13:06 +08:00
Bin Meng
323a6d6910 x86: acpi: Fix build error with certain configuration
When CONFIG_EFI_PARTITION is not set, the following build error is
seen in arch/x86/lib/acpi_s3.c:

  error: expected declaration specifiers or '...' before '*' token
  static void asmlinkage (*acpi_do_wakeup)(void *vector) = (void*)WAKEUP_BASE;

This is actually caused by missing asmlinkage declaration, but with
CONFIG_EFI_PARTITION on, the declaration comes from part.h which
is included from common.h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-08-08 21:13:05 +08:00
Marek Vasut
bd2d489e24 mtd: cfi: Zap CFI_FLASH_SHIFT_WIDTH redefinition
This is defined twice in the same file, with the same value, likely
because of some patch merge issue. Pick the uglier one and nuke it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-08 14:29:48 +02:00
Marek Behún
8daa3468b5 mvebu: turris_omnia: Fix PEX vs SATA detection for board topology
The I2C reading in the PEX vs SATA detection code often fails on the
first try. Try three times, as the code for EEPROM reading does.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-08 14:20:26 +02:00
Bin Meng
091e51d20f x86: Remove dead ISA related codes
Neither new design uses ISA bus, nor does any U-Boot codes use these
codes. Remove them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-08 16:46:32 +08:00
Tom Rini
6e7adf7037 Merge branch 'master' of git://git.denx.de/u-boot-net 2017-08-07 17:37:56 -04:00
Alexandru Gagniuc
da3b9e7fd6 Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:22:29 -05:00
Alexandru Gagniuc
3146f0c017 Move PHYLIB to Kconfig
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:22:28 -05:00
Sebastien Bourdelin
ef1f61aa03 net: phy: micrel: add an option to disable gigabit for the KSZ9031
The environment variable "disable_giga" can now be used to disable
1000baseTx on the Micrel's KSZ9031.

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:31 -05:00
Denis Pynkin
704f3acfcf net: Use packed structures for networking
PXE boot is broken with GCC 7.1 due option '-fstore-merging' enabled
by default for '-O2':

BOOTP broadcast 1
data abort
pc : [<8ff8bb30>]          lr : [<00004f1f>]
reloc pc : [<17832b30>]    lr : [<878abf1f>]
sp : 8f558bc0  ip : 00000000     fp : 8ffef5a4
r10: 8ffed248  r9 : 8f558ee0     r8 : 8ffef594
r7 : 0000000e  r6 : 8ffed700     r5 : 00000000  r4 : 8ffed74e
r3 : 00060101  r2 : 8ffed230     r1 : 8ffed706  r0 : 00000ddd
Flags: nzcv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

Core reason is usage of structures for network headers without packed
attribute.

Reviewed-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:31 -05:00
Holger Dengler
66c89ee31b net: Fix compile failure in net.c
Add missing "defined" statement to fix the compile failures.

Signed-off-by: Holger Dengler <dengler@linutronix.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:31 -05:00
Arun Parameswaran
d7e8ac6f45 net: phy: Add AFE settings to the Broadcom Cygnus phy
Added the AFE (Analog Front End) settings for stability to the
Broadcom Cygnus phy. This improves the time take to perform
auto negotiation.

Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:31 -05:00
Suji Velupillai
c89782dcac net: move Broadcom SF2 driver to Kconfig
move to Kconfig:
	CONFIG_BCM_SF2_ETH
	CONFIG_BCM_SF2_ETH_DEFAULT_PORT
	CONFIG_BCM_SF2_ETH_GMAC

Also modified defconfigs of all platforms that use these configs.

Signed-off-by: Suji Velupillai <suji.velupillai@broadcom.com>
Tested-by: Suji Velupillai <suji.velupillai@broadcom.com>
Reviewed-by: JD Zheng <jiandong.zheng@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:30 -05:00
Alexandru Gagniuc
9a31c739d2 net: phy: Hide Micrel KSZ9021 and KSZ9031 Kconfig options
The correct option is PHY_MICREL_KSZ90X1, but some configs still
select the 9021 and 9031 options, which are deprecated.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:30 -05:00
Alexandru Gagniuc
fbc120e668 net: phy: micrel: Remove ksz90x1 drivers from micrel_ksz8xxx
There should be no longer be any ksz9000 users that pick up the PHY
driver from ksz8xxx, so remove ksz9000 remnants from there.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:30 -05:00
Alexandru Gagniuc
fb92bc8852 configs: Replace deprecated Micrel defines with PHY_MICREL_KSZ90X1
These boards will now use the ksz90x1 driver instead of the mess in
ksz8xxx. This change is needed before the two drivers can be fully
separated.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:30 -05:00
Alexandru Gagniuc
d397f7c45b net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers
The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they
share the same ID. Drivers for bothe PHYs cannot safely coexist, so
the solution was to use #ifdefs to select between the two drivers.

As a result KSZ9031, which has a unique ID, is now caught in the
crossfire. Unless CONFIG_PHY_MICREL_KSZ9031 is defined, the KSZ9031
will not function properly, as some essential configuration code is
ifdef'd-out.

To prevent such situations, move the KSZ9000 drivers to a separate
file, and place them under a separate Kconfig option. While it is
possible to enable both KSZ8000 and KSZ9000 drivers at the same time,
the assumption is that it is highly unlikely for a system to contain
both a KSZ8000 and a KSZ9000 PHY, and that only one of the drivers
will be enabled at any given time.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:30 -05:00
Alexandru Gagniuc
cb543d30df net: phy: Remove duplicate Kconfig selection for Micrel KSZ9021
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:29 -05:00
Vladimir Zapolskiy
0c17b1b79c net: tftp: silence a subscript above array bounds compile time warning
For strncpy() select a minimal string length of destination and source
strings, here DEFAULT_NAME_LEN is preferable to MAX_LEN.

Due to the NUL-terminated contents of default_string the change is
a noop, however it removes a compilation warning if SH2/3/4 platform
specific strncpy() function is used:

  In file included from include/linux/string.h:21:0,
                   from include/common.h:28,
                   from net/tftp.c:9:

  net/tftp.c: In function 'tftp_start':
  arch/sh/include/asm/string.h:52:42: warning: array subscript is above array bounds [-Warray-bounds]
     : "0" (__dest), "1" (__src), "r" (__src+__n)

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:29 -05:00
Joe Hershberger
2fd519f777 net: ag7xxx: Propagate errors on phy access
Don't wait forever.
Pass errors back to the caller.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Marek Vasut <marex@denx.de>
2017-08-07 15:18:29 -05:00
Joe Hershberger
9240a2f5f1 net: ag7xxx: Comment register names
The register constants don't use the exact names that are used in the
TRM, so add comments that use the exact names so that it is clear what
register is being referred to.

https://www.atheros-drivers.com/qualcomm-atheros-datasheets-for-AR9331.html

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Marek Vasut <marex@denx.de>
2017-08-07 15:18:29 -05:00
Philipp Tomsich
734f9abd17 net: usb: r8152: fix "duplicate 'const' declaration specifier"
After upgrading to GCC 7.1, the duplicate const specifies in the
r8152 driver trigger the following build warnings with buildman
(observed on a 'buildman rockchip' test)::
  ../drivers/usb/eth/r8152.c:62:35: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
   static const struct r8152_version const r8152_versions[] = {
                                     ^~~~~

This commit fixes these by removing the duplicate 'const' specifier
from the declarations.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:29 -05:00
Masahiro Yamada
0c1b869b2e net: add static to do_tftpput()
This is only used in cmd/net.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:29 -05:00
Jimmy Du
b044cc1dee net: Get mac address from driver as seed
Previously seeded by obtaining mac addr from env. If mac addr was
never set, rand would output 0. This fix obtains the mac addr
from driver instead.

Signed-off-by: Jimmy Du <jimmy.du@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:28 -05:00
Christian Gmeiner
8f0b169382 drivers/net/phy/fixed: do not overwrite addr
phy_device_create(..) sets the addr of phy_device with a sane value.
There is no need overwrite it.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:28 -05:00
eric.gao@rock-chips.com
b713bc8a2d rockchip: video: defconfig: Add mipi dsi support for evb-rk3288
Add support for rk3288 mipi dsi.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07 21:38:47 +02:00
eric.gao@rock-chips.com
fcc1d05098 rockchip: video: Makefile: Add soc specific driver for rk3288 mipi dsi
Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07 21:32:11 +02:00
eric.gao@rock-chips.com
f680a91d5c rockchip: video: mipi: Add rk3288 soc specific driver for mipi dsi
Add rk3288 soc specific driver for mipi dsi.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07 21:16:22 +02:00
eric.gao@rock-chips.com
e9037fb3ad rockchop: video: mipi: Makefile: Add soc specfic driver for rk3399 mipi dsi
Add Makefile item for soc specific driver for rk3399 mipi dsi.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07 20:45:08 +02:00
eric.gao@rock-chips.com
36602eba80 rockchip: video: mipi: Split mipi driver into common and specific parts
To compatible with different rockchip soc, we split the mipi dirver into
common and soc specific parts, and all the soc share the common
functions from common driver part.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[agust: fix build breakage and warnings]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-07 20:44:01 +02:00
eric.gao@rock-chips.com
c83e835966 rockchip: defconfig: Increase max video resolution for mipi panel
The mipi panel used on evb-rk3399 has a 1920x1200 resolution. But now
the max resolution is 1920x1080. So increase it.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07 19:01:08 +02:00
Bin Meng
c674e00b8a video: Drop the ct69000 driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07 18:15:19 +02:00
Bin Meng
aa82f935ab video: Drop the sm501 driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07 18:14:36 +02:00
Bin Meng
5ec94cdf8e video: Drop the sed156x driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07 18:12:23 +02:00
Bin Meng
0778d0c2d8 video: Drop the l5f31188 driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07 18:10:14 +02:00
Thomas Petazzoni
eaa90e5df2 common/env_embedded.c: rename PPCENV/PPCTEXT macros
The environment has pretty much nothing to do with just "PPC", so
rename the macros to just __UBOOT_ENV_SECTION__ which is more
readable.

In addition, only a single macro is needed: the environment now goes
either to the default section (USE_HOSTCC is defined) or in the .text
section.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-04 20:38:39 -04:00