Commit graph

60088 commits

Author SHA1 Message Date
Hugh Cole-Baker
fc925fd15f configs: rockpro64-rk3399: Enable CONFIG_MISC_INIT_R and ROCKCHIP_EFUSE
This enables reading the cpuid from e-fuse, and deriving a static
MAC address from it. Without this, the ethernet interface on the
rockpro64 can't be used to boot.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Tom Rini
a9fa70b7b7 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add emmc hs200 support
- Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-16 13:13:45 -04:00
Tom Rini
0d6160a340 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- fix mvebu_a3700_spi clock prescale (Marek Behún)
- unmark MXS_SPI, DEPRECATED (Lukasz)
- add spi_write_then_read (Jagan)
- fix SST26* flash ICs (Eugeniy)
- fix soft_spi data abort (Christophe)
2019-09-16 13:13:12 -04:00
Jagan Teki
ce704ea11f doc: driver-model: Update SPI migration status
Update SPI drivers, driver model conversion status for
v2019.10 release.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Eugeniy Paltsev
718fd834c0 mtd: spi-nor: enable protection ops for SST26 flash series
Commit c4e8862308 (mtd: spi: Switch to new SPI NOR framework)
performs switch from previous 'spi_flash' infrastructure without
proper testing/investigations which results in a regressions for
SST26 flash series.

Enable protection ops for SST26 flash series which were
previously enabled by
Commit 3d4fed87a5 (mtd: sf: Add support of sst26wf* flash ICs
protection ops)

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Eugeniy Paltsev
e0cacdcc0a mtd: spi-nor: add missing SST26* flash IC protection ops
Commit c4e8862308 (mtd: spi: Switch to new SPI NOR framework)
performs switch from previous 'spi_flash' infrastructure without
proper testing/investigations which results in a regressions for
SST26 flash series.

Add missing SST26* flash IC protection ops which were introduced
previously by
Commit 3d4fed87a5 (mtd: sf: Add support of sst26wf* flash ICs
protection ops)

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Jagan Teki
210d8ad0fa mtd: spi: Drop sf.c
spi_write_then_read, will manage to do the respective
spi_xfer based on the tx_buf, rx_buf so drop the
legacy spi_flash_read/write/cm code.

Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Jagan Teki
43084a56b0 mtd: spi_dataflash: Use spi read then write
Now, we have spi_write_then_read routine that would handle
spi_xfer handling based on the tx_buf and rx_buf parameters.

So, replace individual flash read/write/cmd transfer call
with spi_write_then_read.

Cc: Egnite GmbH <info@egnite.de>
Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
Cc: Ilko Iliev <iliev@ronetix.at>
Cc: Marek Vasut <marex@denx.de>
Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Cc: Alison Wang <alison.wang@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Jagan Teki
8473b32127 spi: Add spi_write_then_read
Add support for SPI synchronous write followed by read,
this is common interface call from spi-nor to spi drivers.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-09-16 08:09:22 +05:30
Lukasz Majewski
6bd6c21693 spi: Kconfig: Unmark DEPRECATED for MXS_SPI
MXS_SPI driver now partially converted into driver-model,
so unmark the DEPRECATED option for the same.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
[jagan: update the commit message]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Christophe Kerello
dfe72d081d spi: soft_spi: Fix data abort if slave is not probed
In case spi_get_bus_and_cs callback is used, spi bus is first probed
then slave devices are probed. To avoid a data abort in soft_spi probe
function, we need to check that (slave != NULL).

If slave is NULL, cs_flags and clk_flags will be initialized with
respectively GPIOD_ACTIVE_LOW and 0.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Marek Behún
07a5cb9d3b spi: mvebu_a3700_spi: Fix clock prescale computation
The prescaler value computation can yield wrong result if given 0x1f at
the beginning: the value is computed to be 0x20, but the maximum value
the register can hold 0x1f, so the actual stored value in this case is
0, which is obviously wrong.
Set the upper bound of the value to 0x1f with the min macro.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Tom Rini
a314ec1bfd Merge branch 'master' of git://git.denx.de/u-boot-sh 2019-09-15 21:14:26 -04:00
Tom Rini
6f4001315a Merge branch 'master' of git://git.denx.de/u-boot-usb
- Assorted bugfixes
2019-09-14 19:56:09 -04:00
Tom Rini
23b93e33ad Merge branch '2019-09-13-ti-imports'
- Assorted K3 bugfixes.
- Assorted DM enablements, dead code removal.
2019-09-14 19:53:24 -04:00
Marek Vasut
b32882dadb sh: r2dplus: Enable DHCP command
Enable the "dhcp" command as a minor convenience.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14 21:28:55 +02:00
Marek Vasut
a12c90a28d sh: r2dplus: Fix missing PCI range
Add missing PCI range for translating DRAM to bus addresses.
This fixes e.g. PCI NIC interface and allows network to work
in QEMU.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14 21:28:55 +02:00
Marek Vasut
fa7cff834f sh: Fix SH4 build with GCC versions without -m4-nofpu
Pass -m4 instead of -m4-nofpu to GCC versions which do not support
the -m4-nofpu option.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14 21:28:55 +02:00
Marek Vasut
e914109de4 sh: Fix incorrect linking with new binutils
Since binutils 2.30 , the resulting U-Boot binary was incorrectly linked
against address 0 instead of text base, fix it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14 21:28:54 +02:00
Andrew F. Davis
1852b44cef configs: am65x_hs_evm: Use FIT images when booting HS devices
HS devices use the FIT post processing step to authenticate boot images.
Set the configured boot command to load FIT by default.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-09-13 11:56:30 -04:00
Andrew F. Davis
76470b6929 configs: ti: Add environment support commands for FIT loading
Some parts of these commands can be reused, add them to common files.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-09-13 11:56:30 -04:00
Faiz Abbas
16f14b930d ARM: dts: dra74x: Fix iodelay configuration for mmc3
According to the latest am572x[1] and dra74x[2] data manuals, mmc3
default, hs, sdr12 and sdr25 modes use iodelay values given in
MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is
selected and correct iodelay values are configured.

[1] http://www.ti.com/lit/ds/symlink/am5728.pdf
[2] http://www.ti.com/lit/ds/symlink/dra746.pdf

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-09-13 11:56:30 -04:00
Lokesh Vutla
78e512129b arm: k3: Use get_ti_sci_handle() where ever possible
Instead of calling uclass apis everywhere, use get_ti_sci_handle()
when ever ti_sci is needed.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-13 11:56:30 -04:00
Lokesh Vutla
e8d3a18639 arm: k3: Fix getting ti_sci handle
API get_ti_sci_handle() is relying on the device-tree node name
to be "dmsc" for probing the ti_sci device. But with the introduction
of debug messages for dmsc, the node name changed to dmsc@44083000.
Because of this ti_sci is never probed cause a boot failure. Instead
of relying on device-tree node name, use the first available firmware
node for probing ti_sci.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-13 11:56:30 -04:00
Adam Ford
b8879c4ef7 ARM: omapl138_lcdk: Enable Pinctrl
The single pinctrl supports the da8xx, so this patch enables
pinctrl in U-Boot.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13 11:56:30 -04:00
Adam Ford
ca62f2ba15 ARM: omapl138_lcdk: Enable DM_GPIO and DM and GPIO Commands
The da8xx GPIO driver is available with DM_GPIO support.  This
patch enables the CMD_GPIO, CMD_DM, and DM_GPIO and DA8XX_GPIO.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13 11:56:08 -04:00
Adam Ford
20a4a853e2 ARM: omapl138_lcdk: Disable SPL_DM_USB
The USB was just recently enabled, so it is unlikely anyone is
using it in SPL, so this patch removes it from SPL to further
reduce the SPL code size.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13 11:56:08 -04:00
Adam Ford
bebe758101 ARM: omapl138_lcdk: Remove dead code
The header it littered with #ifdefs and #defines and that appear
to be legacy associations to the older da850-evm and in some cases
obsolete with either Kconfig or DM migrations.  This patch removes
these legacy references.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13 11:56:08 -04:00
Suniel Mahesh
24e443978a arm: am437x: cm-t43: Enable DM for MMC, USB, SPI, SPI_FLASH, enable BLK
Enable driver model for USB, MMC, SPI and SPI_FLASH. Also enable BLK.
This will remove the following compile warnings:

===================== WARNING ======================
This board does not use CONFIG_DM_MMC. Please update
the board to use CONFIG_DM_MMC before the v2019.04 release.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
====================================================
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-13 11:56:08 -04:00
Suniel Mahesh
d60eb8e49e arm: am437x: cm-t43: Add device tree, enable OF_CONTROL
Add device tree from Linux for driver model conversion
and enable OF_CONTROL. This will remove the following compile
warning:
==================================================
Device Tree Source is not correctly specified.
Please define 'CONFIG_DEFAULT_DEVICE_TREE'
or build with 'DEVICE_TREE=<device_tree>' argument
===================================================
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-13 11:56:08 -04:00
Vignesh Raghavendra
62a9620135 soc: ti: k3-navss-ringacc: fix k3_nav_ringacc_ring_reset_dma
In case dma_ring_reset_quirk is not set the k3_ringacc_ring_reset_dma will
just exit without ring reset. Fix it, by adding ring reset call in case
dma_ring_reset_quirk is not.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-09-13 11:56:08 -04:00
Priyanka Jain
87d5b22558 MAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainers
Change maintainers to Priyanka Jain for fsl-qoriq, mpc85xx

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-09-13 10:14:45 -04:00
Tom Rini
3ee0284a16 Pull request for UEFI sub-system for v2019.10-rc4 (4)
Fixes for the EFI_FILE_PROTOCOL:
 
 * correctly iterate over directories
 * correct Unicode conversion of file names
 * parameter checks
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl15Uz0ACgkQxIHbvCwF
 GsQOIQ//d+EdhR6+24RnrNKashgCDDcUerDA6eSR5GeJrzEBM9GD8DNlG94P2gzY
 WGSMYl5jQ5/lCXOuW4YnqZMS19Ov1Fcb+unx35JMfXCfZSE9JrIVVBb/bXf617EM
 LCIly8P0xfGXtSBwT5vwhhVVP8A1ZC9RadKe/KsXNPIY8vZ1rU9gv6juBOySZ3q3
 WrUdHRJt+B9jNENh8APyEIEvTT6zdrtWjA5eYkVFyJEZ4+9qNOV1uaM5+gfpIAXc
 CuByGi7DXok2eXdAE6lPj4HAH99h1JQDMicNNc+9QYh6DEyNZQEzCO2irNuUfPlW
 Oji29XzaDTZlRHPjvMIuXJFtCqnXDYDaVYWVy3yHJ1x3owVBq2JfIvZAcr3LE+u7
 23SZWOJTOzya/NlzDXxxHY3PJtRzgL3MFXkOA7B9lD+gHWNju3PPIbxqqwVto5rP
 Kjnn0rllRXrOVf8X7tguYWnVqDetdiwIKx6kJwCY//VaWThsLJgA6fWYYjVezO6x
 fvs+DUQV7xIgKUHGAGIdYVbrxV3LsdI4LO8Meaxo/LRILa/Rya08Oov21UsMOfuY
 XMat2sqZ9QoJHnedjBHYrCFSdG7G02529sR+gnvgwdjGFUWErTrsiSOZBxKZdPfC
 D88b9Zsj6er4DeHtibX9+jrcrStzXbc7a4LyH6Bg1cOLvB08vGY=
 =A8Yb
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-10-rc4-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for v2019.10-rc4 (4)

Fixes for the EFI_FILE_PROTOCOL:

* correctly iterate over directories
* correct Unicode conversion of file names
* parameter checks
2019-09-12 10:35:46 -04:00
Meenakshi Aggarwal
737c016d25 lx2160: Correct serdes frequency print.
Suffix serdes frequency print with MHz

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Hou Zhiqiang
116f75c7b3 armv8: ls1028a: Updated serdes configuration for 0x13BB
In SerDes protocol 0x13BB, lane C was erroneously assigned
to PCIE1, this is now updated to PCIE2

Fixes: 36f50b7523 ("armv8: ls1028a: Add other serdes
		     protocal support")

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Hou Zhiqiang
c9ba88bafc armv8: fsl-layerscape: Fix typo in Layerscape PCIe config entry
The correct config entry is CONFIG_PCIE_LAYERSCAPE and this
typo results in skipping the fixup of Linux PCIe DT nodes.

Also enable the fixup when Layerscape Gen4 controller driver
is enabled.

Fixes: 4da0e52c9d (armv8: fsl-layerscape: fix config dependency
		     for layerscape pci code)

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Florin Chiculita
b9fe1a261a board: lx2160aqds: add support for SerDes protocol 14
Add SerDes1 protocol 14 in the list of supported protocols.
This configuration enables one high-speed 100G port and PCIe x4.

Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Florin Chiculita
065ccdc710 board: lx2160aqds: fix ethernet-phy compatible property
The code that generates the compatible property concatenates the
ethernet phy id and clause-compatible information without
separating them with a comma, resulting into no ethernet phy driver
getting loaded by Linux kernel.
Suffix phy_id_compatible_str with comma to fix this

Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Pankaj Bansal
5d535aa40b board: fsl: lx2160a: implement board_fix_fdt
lx2160a rev1 and rev2 SoC has different pcie controller.
The pcie controller device tree node fields "compatible"
and registers names needs to be updated accordingly

This change in device tree is handled as part of
fdt fixups. These changes would only be applied
if the soc revision is not rev1.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Chuanhua Han
2f2a19757b armv8: fsl-layerscape: Update I2C clock divider
By default, i2c input clock is programmed at
platform clk / 2 in u-boot, but this is not
correct for all the platforms,
Update I2C clock divider's default values as per
SoC (LS1012A, LS1028A, LX2160A and LS1088A).

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Thomas Schaefer
412e25ab5f watchdog: sp805_wdt: add expire_now method
Add sp805_wdt_expire_now function.
expire_now method is required by U_BOOT_DRIVER.

Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Thomas Schaefer
0490cab584 armv8: ls1028a: configure PMU's PCTBENR to enable WDT
The SP805-WDT module on LS1028A requires configuration of PMU's
PCTBENR register to enable watchdog counter decrement and reset
signal generation. The watchdog clock needs to be enabled first.

Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Alex Marginean
a3ce94b602 arm: dts: ls1028a-qds: define the MDIO MUX
Add the device-tree structure describing the MUX in board dts.

QDS board has an on-board RGMII PHY and 4 slots for extension cards.
All these can be accessed over MDIO through a MDIO MUX controlled
over I2C.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:31 +05:30
Pankaj Bansal
f002b3fa8d board/lx2160a: Fix MC firmware loading for SD boot
During boot, u-boot reads MC, DPL, DPC firmware from SD card
and copies to DDR. Update DDR addresses to which these firmwares
are copied as per memory map of these firmwares on SD-card
so that isolation between the regions of various firmwares
is maintained to avoid geting overwritten.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:11:36 +05:30
Yinbo Zhu
f09d52b4c0 configs/ls1012ardb,lx2160ardb,ls1028ardb: add esdhc hs200 config
Enable CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK and
CONFIG_MMC_HS200_SUPPORT config for
ls1012ardb, ls1012ardb, lx2160ardb
in defconfig file

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:06:29 +05:30
Yinbo Zhu
6f883e501b mmc: fsl_esdhc: Add emmc hs200 support
Add eMMC hs200 mode for ls1028a, ls1012a, lx2160a.
This increases eMMC performance.
Tuning procedure is currently not supported.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:05:38 +05:30
Yinbo Zhu
23da111d5f dts: armv8: add emmc hs200 support for ls1028ardb
Add emmc hs200 support for ls1028ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:04:43 +05:30
Yinbo Zhu
0f021c8bde dts: armv8: add emmc hs200 support for lx2160ardb
Add emmc hs200 support for lx2160ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:04:09 +05:30
Yinbo Zhu
be852314dc dts: armv8: add emmc hs200 support for ls1012ardb
Add emmc hs200 support for ls1012ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:03:10 +05:30
Yinbo Zhu
29009a507c mmc: Kconfig: Add FSL_ESDHC_USE_PERIPHERAL_CLK option
NXP fsl_esdhc controller supports two reference clocks:
platform clock and peripheral clock
Peripheral clock can provide higher clock frequency
which is required to be used for tuning of SD UHS mode
and eMMC HS200/HS400 modes.

Peripheral clock is enabled by default by defining config
option FSL_ESDHC_USE_PERIPHERAL_CLK if eMMC HS200/HS400 modes
are supported.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:02:10 +05:30