Commit graph

60088 commits

Author SHA1 Message Date
Yinbo Zhu
24cb6f2295 fsl-layerscape: Add fsl_esdhc peripheral clock support
Add esdhc peripheral clock support
for NXP layerscape platforms: LS1046ARDB, LS1043ARDB,
LS1012ARDB, LS1028ARDB, LS1088ARDB, LX2160ARDB

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:00:35 +05:30
Tom Rini
5ba8b12543 Merge tag 'u-boot-rockchip-20190912' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- add idbloader.img target for rockchip tpl+spl;
- usb ehci/ohci: go on process if clock driver don't have clk_enable();
- remove clk_enable() for rockchip clock drivers;
- add boot order for rockpro64
2019-09-11 23:08:34 -04:00
Heinrich Schuchardt
8262578535 efi_loader: parameter checks EFI_FILE_PROTOCOL.SetInfo()
We do not support volume label changes. No parameter checks are needed
here.

When the info for as file is changed the buffer must always contain a file
name.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-11 21:51:38 +02:00
Matwey V. Kornilov
326b262419 doc: lion_rk3368: use idbloader.img for rk3368
Makefile now produces ready-to-deploy idbloader.img file.

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Matwey V. Kornilov
78af73efa0 doc: rockchip: use idbloader.img for rk3288, rk3328, rk3399
Makefile now produces ready-to-deploy idbloader.img file.

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Matwey V. Kornilov
1b0a936b52 rockchip, Makefile: add idbloader.img target
Many Rockchip platforms require the same u-boot deploy procedure
when TPL and SPL both enabled.

The following examples are taken from doc/README.rockchip
and board/theobroma-systems/lion_rk3368/README:

RK3288:

  ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out
  cat ./spl/u-boot-spl-dtb.bin >> out
  sudo dd if=out of=/dev/mmcblk0 seek=64

RK3328:

  ./tools/mkimage -n rk3328 -T rksd -d ./tpl/u-boot-tpl.bin idbloader.img
  cat ./spl/u-boot-spl.bin >> idbloader.img
  sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64

RK3368:

  ./tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img
  cat spl/u-boot-spl-dtb.bin >> spl-3368.img
  dd if=spl-3368.img of=/dev/sdb seek=64

RK3399:

  ./tools/mkimage -n rk3399 -T rksd -d ./tpl/u-boot-tpl-dtb.bin out
  cat ./spl/u-boot-spl-dtb.bin >> out
  sudo dd if=out of=/dev/sdc seek=64

Here, we introduce generic idbloader.img target
which is the TPL image followed by the SPL binary.

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Kever Yang
c9ec5fe018 rockchip: clean makefile for misc.c
Use obj-$(config) instead of #ifdef $config to make the code looks
clean, and move the misc_init for U-Boot proper only.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Kever Yang
45f8b55eca rockchip: not depends on TPL_BUILD for rk3188 makefile including
The rk3188/Makefile already depends on !TPL_BUILD, so no need to add
this again in parent Makefile, remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Kever Yang
445f85fc8e rockchip: clk: rk3399: remove clk_enable()
There is no real driver for clk enable/disable now, and we actually
don't need it now, remove it so that not waste CPU cycles and code size.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Kever Yang
7be113ba79 rockchip: clk: rk3368: remove clk_enable()
There is no real driver for clk enable/disable now, and we actually
don't need it now, remove it so that not waste CPU cycles and code size.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Kever Yang
899c3b3523 rockchip: clk: rk3328: remove clk_enable()
There is no real driver for clk enable/disable now, and we actually
don't need it now, remove it so that not waste CPU cycles and code size.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Kever Yang
c7ed19047e rockchip: clk: rk3288: remove clk_enable()
There is no real driver for clk enable/disable now, and we actually
don't need it now, remove it so that not waste CPU cycles and code size.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Kever Yang
6578db8961 usb: ohci-generic: don't probe fail if there is no clk_enable() ops
Some clock driver do not have a clk_enable() call back, and we should not
treat this as fail in ehci probe like other modules, eg. clk_enabl_bulk()
do not return fail if ret value is '-ENOSYS'

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-09-11 16:16:12 +08:00
Kever Yang
54a0c7b2e7 usb: ehci-generic: don't probe fail if there is no clk_enable() ops
Some clock driver do not have a clk_enable() call back, and we should not
treat this as fail in ehci probe like other modules, eg. clk_enabl_bulk()
do not return fail if ret value is '-ENOSYS'

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-09-11 16:16:12 +08:00
Kever Yang
86b4a6db68 rockchip: rk3399: dts: add boot order for rockpro64
The rk3399 rockpro64 board can boot from emmc and sdcard.
TODO: add spiflash as boot device.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Jean-Jacques Hiblot
e3e5825d01 usb: musb_hcd: fix compilation error
commit 65c1f9820c8f79f "usb: Add nonblock argument to submit_int_msg"
breaks the musb_hcd driver.
Fixing it by adding the missing argument

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-09-11 10:11:39 +02:00
Michal Suchanek
9dcab2c4d2 dwc2: use the nonblock argument in submit_int_msg
An USB 1.1 keyboard connected to dwc2 through a high-speed hub does not
report status until it changes. With this patch you can enable keyboard
by pressing a key while USB devices are probed. Without a keypress no
state is reported and the probe times out. We don't want to wait for a
keypress or timeout while polling for keypresses so implement an int_msg
nonblock variant that exits early on error.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Michal Suchanek
3437121c03 usb: Add nonblock argument to submit_int_msg
This will be used to implement non-blocking keyboard polling in case of
errors.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Michal Suchanek
50dce8fbf0 usb: storage: submit_int_msg -> usb_int_msg
Use the wrapper as other callers do.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Michal Suchanek
fdd135bf8e usb: usb_submit_int_msg -> usb_int_msg
This aligns naming with usb_bulk_msg and usb_control_msg.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Michal Suchanek
3e816a2424 usb_kdb: only process events successfully received
Causes unbound key repeat on error otherwise.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Tom Rini
001c8ea94a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Tangier ACPI table fixes
- Support getting high memory size on QEMU x86
- Show UEFI images involved in crash for x86
- EFI loader conventional memory map fix
2019-09-10 08:52:00 -04:00
Tom Rini
3aec234e3f - Add support for dis_u2_susphy_quirk in the xhci-dwc3 driver to fix boot when
a device is plugged only in the OTG capable port for libretech-ac and libretech-cc
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl13WqIACgkQd9zb2sjI
 SdEkpg//cnhgm7YmTrukPdQI8NmdKbeSHOuXpKAXtFlSFLPc8tl7Sv0++ctDnp4h
 FxlTwHU4F25EIO0nheVF5NfD2sQ6LJMKIYcsEWXkyu4suRcAgU1rfaGS6DFIZ02e
 tdfwbozQNVb+CQlDwHRVbCHgEFZTDCLeNE0vx+OxQ2sCOG/+ad1yx1XqWE1krvGf
 0OoCF6KzxlqapCvkAJge1xVCpFrCrBk3vy7/XF6i0CcCr42v8aiIRHy8B1/I20I4
 NrttMYQpvDosnGz+u25eL2PXkXu9aAZNOaZw+i61xu1zWAjxbF8Vju1148ZOH6Ea
 yRf7P45v6pNpEfzRItvh0l++3wJc55vI0Yxc9i2zOU6qQIuwk4p9bJyS1x/+gyXg
 dT03nHmLfIvc+wlm/HZUObkwiFMfXgMb6FAjZbRue2ceH+kj0s99nQb7R5t6pa4x
 vxR3yBYS9PFoirH3oeRMFXidNfx+sgdYfGFyPsjq8JCOTV60gU6dsRLIZKunhPB+
 l8ESfRcda4cD7Lg6Q6xBD9f6GYyOWAJVsrgAwBEhJ1xvsZJOhGKKUjODrab+4z26
 dytaz2q4fmwIGRA3qDqEejKotcaorbqpak+WoNOZmIMvUiTJANw92+FMKfs47A1R
 VQbfnku1gvvCL05rt564hjctp4KVLgH5wNFNAdvkgQCVxC30LiI=
 =C5op
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190910' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Add support for dis_u2_susphy_quirk in the xhci-dwc3 driver to fix boot when
a device is plugged only in the OTG capable port for libretech-ac and libretech-cc
2019-09-10 08:51:17 -04:00
Andy Shevchenko
dd4faa964f x86: tangier: Use spaces over TABs in ASL code
For sake of consistency use spaces over TABs in ASL code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 16:19:03 +08:00
Andy Shevchenko
980fe1ab2a x86: tangier: Fix off-by-one error when preparing CSRT
Intel iDMA 32-bit controller has 17 bits for the maximum block size value.
Due to nature of the binary number representation the maximum value is
2^17 - 1. The original code misses the latter part in equation.

Fixes: 5e99fde34a ("x86: tangier: Populate CSRT for shared DMA controller")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 16:19:03 +08:00
Andy Shevchenko
0c6352ec2a x86: tangier: Reserve PCI ECAM in motherboard resources
Per PCI firmware specification the ACPI has to reserve the memory
which is defined as PCI ECAM.

Fixes: 39665beed6 ("x86: tangier: Enable ACPI support for Intel Tangier")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 16:19:03 +08:00
Andy Shevchenko
19b6e1ba8c x86: acpi: Annotate struct acpi_table_header with __packed
GCC 9.2 starts complaining about possible pointer misalignment of
pointers to the unpacked (alignment=4) structures in the packed
(alignment=1) ones:

  CC      arch/x86/cpu/tangier/acpi.o
arch/x86/cpu/tangier/acpi.c: In function ‘acpi_create_fadt’:
arch/x86/cpu/tangier/acpi.c:22:37: warning: taking address of packed
member of ‘struct acpi_fadt’ may result in an unaligned pointer value
[-Waddress-of-packed-member]
  22 |  struct acpi_table_header *header = &(fadt->header);

  CC      arch/x86/lib/acpi_table.o
arch/x86/lib/acpi_table.c: In function ‘acpi_create_spcr’:
arch/x86/lib/acpi_table.c:366:37: warning: taking address of packed
member of ‘struct acpi_spcr’ may result in an unaligned pointer value
[-Waddress-of-packed-member]
  366 |  struct acpi_table_header *header = &(spcr->header);

Fix the potential issues by annotating embedded structures with
__packed even though they are packed naturally.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: add GCC version number in the commit message]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 16:17:55 +08:00
Neil Armstrong
b35b807682 usb: xhci-dwc3: Add support for dis_u2_susphy_quirk
This quirk is necessary for the Amlogic GXL SoCs otherwise the
Port 2 PHY doesn't get out of suspend and U-Boot resets the board after:

XHCI timeout on event type 33... cannot recover.
BUG: failure at drivers/usb/host/xhci-ring.c:474/xhci_wait_for_event()!
BUG!

This quirk is also handled in the dwc3 core code, but until the
xhci-dwc3 driver uses the dwc3 core, the quirk must be handled here
to fix USB support on the Amlogic libretech-cc and libretech-ac board
when a device is only plugged in the OTG port.

Cc: Yuri Frolov <crashing.kernel@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Fixes: dc9cdf859e ("usb: dwc3: Add DWC3 controller driver support")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 10:00:53 +02:00
Park, Aiden
5793553fa2 x86: efi_loader: Use efi_add_conventional_memory_map()
Use efi_add_conventional_memory_map() to configure EFI conventional memory
properly with ram_top value. This will give 32-bit mode U-Boot proper
conventional memory regions even if e820 has an entry which is greater than
32-bit address space.

Signed-off-by: Aiden Park <aiden.park@intel.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[bmeng: fixed some typos in the commit message]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 14:31:42 +08:00
Heinrich Schuchardt
74b76357df x86: show UEFI images involved in crash
If a crash occurs, show the loaded UEFI images to facilitate analysis.

This is an example output:

=> bootefi 0x1000000
Found 0 disks
Hello world of bugs!
Invalid Opcode (Undefined Opcode)
EIP: 0010:[<06ceb06e>] EFLAGS: 00010206
Original EIP :[<fec9906e>]
EAX: 00000000 EBX: 06cec000 ECX: 00000fd0 EDX: 00000001
ESI: 06ced18a EDI: 07d0fe10 EBP: 07fe27a0 ESP: 07d0fde0
 DS: 0018 ES: 0018 FS: 0020 GS: 0018 SS: 0018
CR0: 00000033 CR2: 00000000 CR3: 00000000 CR4: 00000000
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Stack:
    0x07d0fde8 : 0x00000000
    0x07d0fde4 : 0x06ced040
--->0x07d0fde0 : 0x07fe27a0
    0x07d0fddc : 0x00010206
    0x07d0fdd8 : 0x00000010
    0x07d0fdd4 : 0x06ceb06e
UEFI image [0x06cea000:0x06cf0fff] pc=0x106e '/bug-i386.efi'
### ERROR ### Please RESET the board ###

With the additional information provided by this patch we know that the
problem occurred 0x106e after the load address of bug-i386.efi.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 14:27:15 +08:00
Park, Aiden
5a8558053d doc: slimbootloader: Update Linux booting steps on QEMU
Add steps to test Linux booting on QEMU with Yocto image.

Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 14:25:40 +08:00
Bin Meng
2495c3a3fd x86: qemu: Report high memory in the E820 table
Now that we are able to get the size of high memory from QEMU,
report its memory range as usable ram.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Aiden Park <aiden.park@intel.com>
2019-09-10 14:19:39 +08:00
Bin Meng
ea67d549b8 x86: qemu: Support getting high memory size
At present only size of memory that is below 4GiB is retrieved from
QEMU. Add a function that gets size of memory that is above 4GiB.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Aiden Park <aiden.park@intel.com>
2019-09-10 14:19:39 +08:00
Bin Meng
f4c0030074 x86: qemu: Extract getting memory size to a separate routine
This extracts getting memory size logic in dram_init() to a separate
routine qemu_get_low_memory_size(). No functional changes.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Aiden Park <aiden.park@intel.com>
2019-09-10 14:19:39 +08:00
Bin Meng
d2860c0088 x86: Drop weak version board_get_usable_ram_top()
Every x86 platform provides board_get_usable_ram_top(), hence there
is no need to provide a weak version board_get_usable_ram_top(), not
to mention there is another weak version board_get_usable_ram_top()
in common/board_f.c.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Aiden Park <aiden.park@intel.com>
2019-09-10 14:19:39 +08:00
Andy Shevchenko
03f78868ae x86: acpi: Slightly reduce binary size of ACPI tables for Tangier
Using ACPI predefined macros, such as Zero or One, will reduce a binary
size of resulting ACPI tables.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: manually fixed the conflicts when applying]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 14:19:39 +08:00
Andy Shevchenko
08afd714d0 tools: Add ifwitool to .gitignore
Follow up fix to the commit

56bf4f8630 ("x86: Add ifwitool for Intel Integrated Firmware Image")

in order to ignore created binary.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 14:19:39 +08:00
Tom Rini
c705fc3b40 arm: ti: Add missing "=" from previous fix
While the original patch to fix a regression in distro boot for mmc on
these platforms had the correct syntax, I broke the change while
applying.  Add back in the missing "=" here so that the syntax is
correct.

Reported-by: Andre Heider <a.heider@gmail.com>
Fixes: 27e0f3bcf0 ("arm: ti: Fix regression in distro boot for mmc")
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-09 10:55:45 -04:00
Heinrich Schuchardt
11335c0439 efi_loader: check parameters EFI_FILE_PROTOCOL.GetInfo()
Check the parameters of EFI_FILE_PROTOCOL.GetInfo() to avoid possible NULL
dereference.

Check the buffer size for EFI_FILE_SYSTEM_INFO.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:09 +02:00
Heinrich Schuchardt
632834ce6d efi_loader: volume name in EFI_FILE_PROTOCOL.GetInfo()
We cannot determine the volume name in U-Boot. Instead of providing a dummy
volume name in case of EFI_FILE_SYSTEM_INFO and EFI_UNSUPPORTED in case of
EFI_FILE_SYSTEM_VOLUME_LABEL consistently return an empty string.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:09 +02:00
Heinrich Schuchardt
e692ed1d56 efi_loader: EFI_FILE_PROTOCOL rev 2 stub
The UEFI specification requires to implement version 2 of the
EFI_FILE_PROTOCOL. Provide the missing functions as stubs.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:09 +02:00
Heinrich Schuchardt
9bb62fa63b efi_loader: file size checks
The file size has to be determined in multiple places. Factor out a common
function.

If on entry into EFI_FILE_PROTOCOL.Read() the current position is beyond
the end of the file, return EFI_DEVICE_ERROR.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:08 +02:00
Heinrich Schuchardt
83a74ad143 efi_loader: correct reading of directories
EFI_FILE_PROTOCOL.Read() is used both to read files and directories.

When reaching the end of a directory we always have to return buffer size
zero irrespective of the incoming buffer size. (The described scenario for
a Shim quirk cannot arise because every directory has at least '.' and '..'
as entries.)

Even when the buffer_size is too small multiple times we have to keep a
reference to our last read directory entry.

When we return to the start of the directory via SetPosition() we must
remove the reference to a previously kept directory entry.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:08 +02:00
Heinrich Schuchardt
87c4840610 efi_loader: eliminate inline function ascii2unicode()
ascii2unicode() can only convert characters 0x00-0x7f from UTF-8 to UTF-16.
Use utf8_utf16_strcpy() instead.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:08 +02:00
Heinrich Schuchardt
b0f1c728c8 efi_loader: EFI_FILE_PROTOCOL.Write() check args
Check the parameters passed to Write():

* cannot write to directories (UEFI SCT 2017, 5.7.3.5.15)
* cannot write to file opened read only (UEFI SCT 2017, 5.7.3.5.16)

Add missing comments.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:08 +02:00
Tom Rini
40e362a9ab Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
Bug fixes to mmc_spi
Add Aspeed SD driver
Fix dw_mmc timeout calculation
Fix timeout values passed to mmc_wait_dat0
sdhci dt caps/mask update

[trini: Fix evb-ast2500_defconfig CONFIG_MMC line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-08 21:15:13 -04:00
Tom Rini
2f760735c1 Merge branch 'master' of git://git.denx.de/u-boot-sh
- Initial DM conversion
2019-09-07 13:49:39 -04:00
Tom Rini
ba83753289 - fix mailbox status register used for polling
- fix bcm2835_sdhost to wait long enough for a transfer to complete
 - increase kernel image size from 8 MB to 64 MB on arm64
 - add support for RPi4
 - add prefixes for raspberry pi related stuff to git-mailrc
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEiUuSfQSYnG8EMsBltDliWyzx00MFAl1yhwYSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJELQ5Ylss8dNDNE8QAIzrHZ0RYg6eMCBFzAOyFu+daxUqB1vh
 GR3Kq2ku5+cwmWDRhZjj5Y8ualFqm5/IVvIbYLpV8r5ltnHJOsLCUiNVFsyod3uY
 Np3TtTH6B1QkZAJhz+kqHUHlrNlys/+7vEv1gHdSjZ+fM3OTB+NOzA6cjPMPl1lD
 fGQBEeoddMVjA7UDyoEORrwlQTy7PK82FK5xge4S8nmTrCwGkqkapg24haQwabSd
 QvNjXte1r3g/fsQZ+tFRIZEqOrBpdqXt1sEjrDe8ICjUeRIaOs/3lJxgjk2H1ia6
 x9O7u3OJNgmjs7Y5idi5pXBNiEMKFJCInAecPg6vKkaw/CAQgoQN+8MP5jjE4Cvr
 5oN6vkbScSZ8TeSYgb9NoGZ2/YxqJv67U2+4xSLn9eWPflwy3iVIOaM8R1cOEiHy
 On9tE1JMkIEQ6DClyXlERovTnAUkfFh9Wac8UbTxqHEhcBtGzRkPSYkCRXBR6mL1
 GNh3XZEFLDAczm/nzwQSgbGqKo02siKlOJbKh5PMRA/SZXVKY0BlkpI8hmj+2ra0
 V33YjmwxS+NJdRIQJoVQVgJ8eIFdioJ6+6G3oV7btGlgbA1sJajHtm3ZZ5+080+I
 fbiy1ibUjnrWcVmPWEtY3pr6ZzcL52N8Nzj7c02yej2PS/VL2ewYj7vjmUhFOVYv
 uHKtATRqUYCz
 =hWTf
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-boot

- fix mailbox status register used for polling
- fix bcm2835_sdhost to wait long enough for a transfer to complete
- increase kernel image size from 8 MB to 64 MB on arm64
- add support for RPi4
- add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06 19:49:51 -04:00
Andrei Gherzan
e0351b242a git-mailrc: Add rpi and bcm283x maintainer
Add entries for bcm283x and rpi prefix.

Signed-off-by: Andrei Gherzan <andrei@balena.io>
[mb: add commit message]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06 18:16:59 +02:00
Andrei Gherzan
c796140ff3 RPI: Add memory map for bcm2711
Define the memory map for the BCM2711 based on the dt configuration
available in the Raspberry Pi kernel fork.

Signed-off-by: Andrei Gherzan <andrei@balena.io>
[mb: BCM2838 -> BCM2711]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06 18:16:59 +02:00