Commit graph

17862 commits

Author SHA1 Message Date
Hou Zhiqiang
7fb568de53 net: tsec: Add the compatible string "gianfar" support
Add compatible string "gianfar" support and update the
device-tree-bindings doc.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Hou Zhiqiang
25a2e24e94 net: tsec: Add fixed-link PHY support
The info of fixed-link PHY is described in DT node instead of
getting from MII, so detect the fixed-link PHY DT node first,
if it doesn't exist then probe the MII.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Hou Zhiqiang
b4eb9cfc09 net: tsec: convert to use DM_MDIO when DM_ETH enabled
For the platforms on which the eTSEC driver uses DM_ETH, convert its
MDIO controller code to also use DM_MDIO.

Note that for handling the TBI PHY (the MAC PCS for SGMII), we still
don't register a udevice for it, since we can drive it locally and there
is no point in doing otherwise.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Reworked to fix gazerbeam config]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Hou Zhiqiang
16c53ce712 net: fsl_mdio: Correct the MII management register block address
The MII management register block offset is different between
gianfar and etsec2 compatible devices, this patch is to fix
this issue by adding driver data for different compatible
string.

Fixes: 2932c5a802 ("net: tsec: fsl_mdio: add DM MDIO support")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Hou Zhiqiang
c54f6139ed net: fsl_mdio: Change to use virtual address
Use virtual address to access the MII block registers instead
of physical address.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Vladimir Oltean
15c49df8d4 phy: make phy_connect_fixed work with a null mdio bus
It is utterly pointless to require an MDIO bus pointer for a fixed PHY
device. The fixed.c implementation does not require it, only
phy_device_create. Fix that.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Patrick Delaunay
01d89e3d12 dm: add cells_count parameter in live DT APIs of_parse_phandle_with_args
In the live tree API ofnode_parse_phandle_with_args, the cell_count
argument must be used when cells_name is NULL.

But this argument is not provided to the live DT function
of_parse_phandle_with_args even it is provided to
fdtdec_parse_phandle_with_args.

This patch adds support of the cells_count parameter in dev_ and
of_node API to allow migration and support of live DT:
- of_parse_phandle_with_args

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-22 12:54:13 -06:00
Heinrich Schuchardt
36da81e0c1 dm: syscon: typo alerady
* Fix typo: %s/alerady/already/.
* Add missing 'the'.
* Reformat a comment.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-22 12:54:13 -06:00
Tom Rini
2512b3b88b Merge branch '2020-09-14-generic-phy-error-trace' into next
- Add error tracing messages to the generic PHY infrastructure
2020-09-21 16:44:16 -04:00
Tom Rini
751b18b8a1 Merge branch 'master' into next
Merge in v2020.10-rc5
2020-09-21 14:25:37 -04:00
Tom Rini
400f84c5ba Pull request for UEFI sub-system for efi-2020-10-rc5 (2)
The following bugs are fixed:
 
 * incorrect online help for setenv and env
 * description of function efi_mem_carve_out()
 * replace printf() by log_err() in stm32mp1_rng driver
 
 A unit test is provided to check that the boot hart id is provided in the
 RISC-V device-tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl9lGSsACgkQxIHbvCwF
 GsRXKQ//b4cX6tfXy5PFbNf59bTCy4TdCR2/7c0vjMwNbSpemjVDqms8iOrtwaFB
 /dPYC9sJoXXnoY8yq/TZpbamT9rY8f42ZlB+OlWdDXH5v5EJJjw/blaZRMS8z46/
 NYjHfKZC5LafsfWOzcA403g4Bk2rlJEvAcruz15aLa3hACZ4T7s4C1zBZW87t2KD
 57AGWagcyfGbd1oBzJWlSJSpjff8g4yC9XAn4yNtyCKTn5vy0FSXWp6M3wGfK+rG
 KISHmdUsm92cU3z41NIXkaWNfhpkI1krpFyblJEUnjpErvBxxCUecCmd65NNYk4P
 Xus1D4tS6vQGZc5Xmq+RskyPl6o2qtpowno/UpcpQUkdCucfldTsSYWufR7txebf
 H3KAQC/TMJ7WKlSMz3xqVIhRvtWxXazIh4os07EOU2F99OdNcOFvCEUJc4kBmgZk
 TwDv1Z/Iz2stMdRNCFCJpZKVVuwj7qjZ+R83FzUBC8ueWMqERLAhdMwes9CK3N3b
 vz4fBBNfml3UludIaCbNcQk2d8kTDZLWokRqRjE3j3McMQnSU1ffipRWUy+4qJ9q
 6Py82OpUT3g1x5S4lD/Z5jdxS2kYqpZAOHfQpcWs1RMmF8NtW0MOoWXZvYOkxOX7
 DjBysIkls4jB/Wn9z+oiqHkVV4yCh0ZrGhNFSzDgWSF4jbAqnlc=
 =vhkz
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-10-rc5-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-10-rc5 (2)

The following bugs are fixed:

* incorrect online help for setenv and env
* description of function efi_mem_carve_out()
* replace printf() by log_err() in stm32mp1_rng driver

A unit test is provided to check that the boot hart id is provided in the
RISC-V device-tree.
2020-09-19 08:35:20 -04:00
Heinrich Schuchardt
cf0bf89227 rng: stm32mp1: use log() instead of printf()
The logging system provides flexible filtering and enhanced output.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-09-18 22:23:58 +02:00
Robert Marko
74a703a8ad usb: dwc3: Add Qualcomm DWC3 compatible string
Lot of Qualcomm SoC-s use DWC3 controller for both USB2.0 and USB3.0
ports.
Qualcomm has some custom config registers on top of the generic ones,
but for host mode these are not needed.

So lets add the neccessary compatible string.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18 16:20:47 -04:00
Robert Marko
dec042028e phy: add driver for Qualcomm IPQ40xx USB PHY
Add a driver to setup the USB PHY-s on Qualcomm IPQ40xx series SoCs.
The driver sets up HS and SS phys.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18 16:20:47 -04:00
Robert Marko
8ef7df5df3 reset: Add IPQ40xx reset controller driver
On Qualcomm IPQ40xx SoC series, GCC clock IP also handles the resets.
So since this will be needed by further drivers, lets add a driver for the reset controller.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18 16:20:47 -04:00
Robert Marko
6ef099b29e IPQ40xx: Add SMEM support
There is already existing driver for SMEM so lets enable it for IPQ40xx as well.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18 16:20:47 -04:00
Haibo Chen
f9c3a816c0 mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.
Currently, after config the clock rate, delay 10ms, this is quite a rough
method. Check the clock stable status in the present status register is
enough.

Tested-by: Ji Luo <ji.luo@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2020-09-17 14:41:07 +02:00
Heiko Schocher
6e31c62a17 net, qe: add DM support for QE UEC ethernet
add DM/DTS support for the UEC ethernet on QUICC Engine
Block.

Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>
Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com>

Series-changes: 3
- revert:
  commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled")
  as now qe works with DM and DM_ETH support.
- fix mailaddress from Holger

Series-changes: 2
- add comments from Qiang Zhao:
  - add device node documentation
  - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c
    because using drivers/net/fsl_mdio.c leads in none existent
    udevice mdio@3320
    instead boards with DM ETH support should use now this
    driver.
- remove RFC tag

Commit-notes:

- I let the old none DM based implementation in code
  so boards should work with old implementation.
  This Code should be removed if all boards are converted
  to DM/DTS.

- add the DM based qe uec driver under drivers/net/qe

- Therefore copied the files uccf.c uccf.h uec.h from
  drivers/qe. So there are a lot of Codingstyle problems
  currently. I fix them in next version if this RFC
  patch is OK or it needs some changes.

- The dm based driver code is now under drivers/net/qe/dm_qe_uec.c
  Used a lot of functions from drivers/qe/uec.c

- seperated the PHY specific code into seperate file
  drivers/net/qe/dm_qe_uec_phy.c

END
2020-09-17 06:09:53 +02:00
Heiko Schocher
5990b05951 powerpc, qe: add DTS support for parallel I/O ports
add DM support for parallel I/O ports on QUICC Engine Block

Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>
Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com>

Series-changes: 2
- remove RFC
- fixed Codingstyle errors, therefore new patch
  powerpc, mpc83xx: fix codingstyle issues for qe_io.c
- moved DM part to drivers/pinctrl

Commit-notes:
Open questions / discussion:

- I let the old none DM based implementation in code
  so boards should work with old implementation.

  This should be removed if all boards are converted to
  DM/DTS.

- Unfortunately linux DTS does not use "pinctrl-"
  properties, instead "pio-handle" properties.

  Even worser old U-Boot code initializes all pins
  defined in "const qe_iop_conf_t qe_iop_conf_tab[]"
  table in board code. As linux does the same I decided
  to also scan through all subnodes containing "pio-map"
  property and initialize them too.

  The proper solution would be to check for "pio-handle"
  when a device is probed.

END
2020-09-17 06:09:53 +02:00
Heiko Schocher
9bd6444826 powerpc, qe: fix codingstyle issues for drivers/qe
fix Codingstyle for files in drivers/qe, remaining following
check warnings:

$ ./scripts/checkpatch.pl -f drivers/qe/uec.h
CHECK: Macro argument reuse '_bd' - possible side-effects?
+#define BD_ADVANCE(_bd, _status, _base)        \
+       (((_status) & BD_WRAP) ? (_bd) = \
+        ((struct buffer_descriptor *)(_base)) : ++(_bd))

total: 0 errors, 0 warnings, 1 checks, 692 lines checked

$ ./scripts/checkpatch.pl -f drivers/qe/uec_phy.h
total: 0 errors, 0 warnings, 0 checks, 214 lines checked
$ ./scripts/checkpatch.pl -f drivers/qe/uccf.c
total: 0 errors, 0 warnings, 0 checks, 507 lines checked
$ ./scripts/checkpatch.pl -f drivers/qe/uec.c
total: 0 errors, 0 warnings, 0 checks, 1434 lines checked
$ ./scripts/checkpatch.pl -f drivers/qe/uec_phy.c
total: 0 errors, 0 warnings, 0 checks, 927 lines checked

$ ./scripts/checkpatch.pl -f drivers/qe/qe.c
CHECK: Lines should not end with a '('
+U_BOOT_CMD(

total: 0 errors, 0 warnings, 1 checks, 830 lines checked

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-09-17 06:09:53 +02:00
Tom Rini
bd4e8944cf Merge tag 'ti-v2021.01-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next
- Hyperflash boot for J7200
- Update Main R5FSS lockstep mode
- R5F remoteproc support for J7200
- Minor env fixes
- Add SPI boot support for am335x-icev2
2020-09-15 15:22:00 -04:00
Faiz Abbas
afd4f15a39 spi: omap3_spi: Read platform data in ofdata_to_platdata()
Add an ofdata_to_platdata() callback to access dts in U-boot and
access all platform data in it. This prepares the driver for supporting
both device tree as well as static platform data structures in SPL.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-09-15 18:51:53 +05:30
Faiz Abbas
41cf3cb39d arm: mach-omap2: am33xx: Add device structure for spi
Add platform data and a device structure for the spi device
present on am335x-icev2. This requires moving all omap3_spi
platform data structures and symbols to an omap3_spi.h so that
the board file can access them.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-09-15 18:51:53 +05:30
Faiz Abbas
280af01156 spi: spi-uclass: Block dm_scan_fdt_dev with OF_CONTROL to prevent build failures
There are devices which don't use OF_CONTROL or OF_PLATDATA but instead
rely on statically defined platdata. Block dm_scan_fdt_dev() with both
configs to avoid build failures under this condition.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-09-15 18:51:53 +05:30
Suman Anna
6aa3b740c3 remoteproc: k3-r5: Add support for J7200 R5Fs
The K3 J7200 SoC family has a revised R5F sub-system and contains a
subset of the R5F clusters present on J721E SoCs. The integration of
these clusters is very much similar to J721E SoCs otherwise.

The revised IP has the following two new features:
 1. TCMs are auto-initialized during module power-up, and the behavior
    is programmable through a MMR bit controlled by System Firmware.
 2. The LockStep-mode allows the Core1 TCMs to be combined with the
    Core0 TCMs effectively doubling the amount of TCMs available.
    The LockStep-mode on previous SoCs could only use the Core0 TCMs.
    This combined TCMs appear contiguous at the respective Core0 TCM
    addresses.

Add the support to these clusters in the K3 R5F remoteproc driver
using J7200 specific compatibles and revised logic accounting for
the above IP features/differences.

Signed-off-by: Suman Anna <s-anna@ti.com>
2020-09-15 18:51:53 +05:30
Andre Heider
e79c59c0e2 mmc: xenon_sdhci: Add missing common host capabilities
Use mmc_of_parse() to set the common host properties. That includes
"bus-width", so parsing it can be removed from the driver.

But more importantly, "non-removable" is now respected, which fixes
the usage of eMMC.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Tested-by: Marek Behún <marek.behun@nic.cz>
2020-09-15 10:15:56 +08:00
Manivannan Sadhasivam
8505147403 mmc: msm_sdhci: Use mmc_of_parse for setting host_caps
Since the introduction of 'get_cd' callback in sdhci core,
dragonboard410c's MMC interface is broken. It turns out that 'get_cd'
callback checks for the host_caps for validating the chip select. And
since the msm_sdhci driver is not parsing the host_caps from DT, not
all of the cababilities are parsed properly. This results in the MMC
interfaces to be broken.

Hence, fix this by adding a call to 'mmc_of_parse' during driver probe.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-09-15 10:13:37 +08:00
T Karthik Reddy
1e2c5bb9e7 mtd: nand: Fix nand write error with bad block addresses above 32-bit
Nand writes should skip the bad blocks with "nand write" command.
In case of bad blocks with above 32-bit address, nand_block_isbad()
returns false due to truncated bad block address.

In below code segment,

	if (nand_block_isbad(mtd, offset & ~(mtd->erasesize - 1)))

offset is 64-bit and mtd->erasesize is 32-bit, hence the truncation is
happening. Cast 'mtd->erasesize' with loff_t to fix this issue.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-11 17:13:56 -04:00
Chuanjia Liu
9250d0bad5 PCI: mediatek: Release the resource when PCIe enable port fail
On the mt7623 platform, if one port enable fail and other port
enable succeed. It will hang on when using pci enum
because the resource was not released correctly.

Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-09-10 15:32:09 -04:00
Chuanjia Liu
df85e9576c PCI: mediatek: Release the resource when PCIe enable port fail
On the mt7623 platform, if one port enable fail and other port
enable succeed. It will hang on when using pci enum
because the resource was not released correctly.

Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-09-10 11:17:46 -04:00
Ryan Chen
c39c9a94cb clock:aspeed: Sync with Linux kernel clock header define
v2: modify title description aspeed:clock -> clock:aspeed

Use kernel include/dt-bindings/clock/aspeed-clock.h define
for clock driver.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-09-09 16:57:35 -04:00
Ryan Chen
15b87feb2b cosmetic: aspeed: ast2500: Rename clock header
Rename the ast2500-scu.h to aspeed-clock.h.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
2020-09-09 16:57:35 -04:00
Jason Wessel
34873f46ba bcmgenet: Add support for rgmii-rxid
The commit 57805f2270 ("net: bcmgenet: Don't set ID_MODE_DIS when
not using RGMII") needed to be extended for the case of using the
rgmii-rxid.  The latest version of the Rasbperry Pi4 dtb files for the
5.4 now specify the rgmii-rxid.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Tested-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-09-08 16:43:48 +02:00
Jason Wessel
ac458dc823 bcmgenet: fix DMA buffer management
This commit fixes a serious issue occurring when several network
commands are run on a raspberry pi 4 board: for instance a "dhcp"
command and then one or several "tftp" commands. In this case,
packet recv callbacks were called several times on the same packets,
and send function was failing most of the time.

note: if the boot procedure is made of a single network
command, the issue is not visible.

The issue is related to management of the packet ring buffers
(producer / consumer) and DMA.
Each time a packet is received, the ethernet device stores it
in the buffer and increments an index called RDMA_PROD_INDEX.
Each time the driver outputs a received packet, it increments
another index called RDMA_CONS_INDEX.

Between each pair of network commands, as part of the driver
'start' function, previous code tried to reset both RDMA_CONS_INDEX
and RDMA_PROD_INDEX to 0. But RDMA_PROD_INDEX cannot be written from
driver side, thus its value was actually not updated, and only
RDMA_CONS_INDEX was reset to 0. This was resulting in a major
synchronization issue between the driver and the device. Most
visible behavior was that the driver seemed to receive again the
packets from the previous commands (e.g. DHCP response packets
"received" again when performing the first TFTP command).

This fix consists in setting RDMA_CONS_INDEX to the same
value as RDMA_PROD_INDEX, when resetting the driver.

The same kind of fix was needed on the TX side, and a few variables
had to be reset accordingly (c_index, tx_index, rx_index).

The rx_index and tx_index have only 256 entries so the bottom 8 bits
must be masked off.

Originated-by: Etienne Dublé <etienne.duble@imag.fr>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Tested-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-09-08 16:43:02 +02:00
Patrick Delaunay
c1e1dbb8f3 usb: musb-new: sunxi: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the dev_err/pr_err can be change to dev_dbg/pr_debug.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
fc8ead1a0a ata: dwc-ahci: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_debug.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
890fc370a9 usb: host: ehci-hcd: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_debug.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
3b417a7d82 usb: host: ohci: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the dev_err can be change to dev_dbg.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
2041ae5a5a phy: generic: add error trace to detect PHY issue in uclass
Add an error trace for PHY errors directly in generic phy
functions provided by PHY uclass.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Tom Rini
314b9b4a38 Merge branch 'remove-config-nr-dram-banks-v9-2020-08-26' of https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next 2020-09-07 14:31:00 -04:00
zachary
7757c85199 phy: marvell: a3700: add sata comphy on lane 2 with invert option
- This patch moves sata phy powerup from dedicate phy to compphy
  and adds invert option for sata powerup routine.

Change-Id: I1b4e8753e2b2c14c6efa97bca2ffc7d2553d8a90
Signed-off-by: zachary <zhangzg@marvell.com>
Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/53601
Reviewed-by: Igal Liberman <igall@marvell.com>
Tested-by: Igal Liberman <igall@marvell.com>
[a.heider: adapt to mainline]
Signed-off-by: Andre Heider <a.heider@gmail.com>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-04 14:02:00 +02:00
Tom Rini
9bfb567e5f Merge branch 'master' of git://git.denx.de/u-boot-usb
- Mostly DFU fixes and r8152 fixes
2020-09-03 09:48:28 -04:00
Tom Rini
7f4d3c0445 Merge branch 'master' of git://git.denx.de/u-boot-sh
- SH serial bugfix
2020-09-03 09:00:35 -04:00
Gary Bisson
293a6dfeb9 fastboot: getvar: fix partition-size return value
The size returned by 'getvar partition-size' should be in bytes, not in
blocks as fastboot uses that value to generate empty partition when
running format [1].

Note that the function was already returning the proper size in bytes
for NAND devices (see struct part_info details).

[1]
https://android.googlesource.com/platform/system/core/+/refs/heads/android10-release/fastboot/fastboot.cpp#1500

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2020-09-01 14:47:43 +02:00
yurii.pidhornyi
64af06ce91 fastboot: Fix fastboot reboot fail by changing functions order
It was revealed that when the fastboot_tx_write_str function is called
without the previously initialized fastboot_func->in_req->complete field,
a copy of in_req will be sent to the I/O requests queue without
an initialized field.

Moving a piece of code with the initializing of the
fastboot_func->in_req->complete field above transmit_tx allows to solve
this problem.

Fixes: 65c96757fe "usb: fastboot: Convert USB f_fastboot to shared fastboot"
Signed-off-by: yurii.pidhornyi <yurii.pidhornyi@globallogic.com>
2020-09-01 14:47:43 +02:00
Sherry Sun
405217a033 f_sdp: Change bInterval of interrupt endpoint to 3
Since the USB HID limits the maximum bandwidth(3072) for interrupt
endpoint transfers, when the bInterval set to 1, we can only support 3
boards to run sdp at the same time. In order to support more boards,
change the bInterval of interrupt endpoint to 3, which will not affect
the transmission speed.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Sherry Sun
9e06c5c55a f_sdp: Add EP1_OUT as default data receive pipe in sdp
EP0 has been used to transfer file data in sdp before, but the max
packetsize of ep0 is 64 bytes. So in order to improve the file transfer
speed, here add the EP1_OUT interrupt endpoint which max packetsize is
set to 1024 byte.

After testing, it turns out that using ep1out is twice as fast as using
ep0 while receiving data in sdp.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Peng Fan
b0e9f3e593 f_sdp: Support searching and loading FIT or container image
Add support to f_sdp to search and load iMX8 container image or iMX8M
FIT image by new UUU command SDPV.

When using the SDPV, the uuu will continue to send out data after first
level boot loader used by ROM. This means uuu won't skip to the offset
of the second boot loader, and the padding data before second boot loader
will be sent out. So we have to search the FIT header or container header
in the buffer that SDP received.

Also change to more common method to exit f_sdp handler not depending on
SPL_FIT_FOUND flag because container loader won't set this.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Ye Li
5dee7f0b02 f_sdp: Fix wrong usb request size
Because the buffer length of sdp usb request is 65, we have to allocate
65 bytes not 64 bytes. Otherwise there is potential buffer overflow.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-01 14:47:43 +02:00
Ye Li
d10d429112 f_sdp: Add high speed endpoint descriptor
Add HS endpoint descriptor for SDP. So that we can use high speed endpoint,
and the SDP device can send packet with 512 byte size.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-01 14:47:43 +02:00