We are not iterating CQSPI_REG_RETRY, we are waiting 'timeout' ms, since
day 1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Adaptation of Linux commit d74c36480a67
This patch adds support for ESMT F50L1G41LB and F50D1G41LB.
It seems that ESMT likes to use random JEDEC ID from other vendors.
Their 1G chips uses 0xc8 from GigaDevice and 2G/4G chips uses 0x2c from
Micron. For this reason, the ESMT entry is named esmt_c8 with explicit
JEDEC ID in variable name.
Datasheets:
https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F50L1G41LB(2M).pdfhttps://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F50D1G41LB(2M).pdf
Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Tested-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
During SFDP header parse and BFPT parse, structures in stack are used
to perform spi_nor_read_sfdp() which expects a dma-safe buffer.
This commit introduces spi_nor_read_sfdp_dma_unsafe() to wrap
spi_nor_read_sfdp() using a kmalloc'ed bounce buffer which is
the same implementation in Linux (drivers/mtd/spi-nor/sfdp.c).
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
- Add TPM support for venice boards
- Add networking support for imx93-evk
- Enable TCP, IPv6, wget for DHCOM and Data Modul boards
- Enable fastboot support for Toradex boards
- Allow pico-imx7d to boot from SD
- Enable fastboot for beacon imx8m beacon boards, disabled
SYS_CONSOLE_IS_IN_ENV
- Fix mxsboot to prevent NAND blocks being reported as bad
- Add imx8mm PWM clock support
- Several devicetree syncs with the kernel
- Add support for i.MX8MP Polyhex Debix Model A SBC
- Reworked ddr_load_train_firmware() to get a 50ms boot time improvement
Enable support for TCP protocol, wget, and IPv6 on this platform.
The former two allow users download payload into the U-Boot from
a web server, which may be more convenient or easier to set up
than TFTP server. The later is enabled to future proof the IP
stack on this platform.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Enable support for TCP protocol, wget, and IPv6 on this platform.
The former two allow users download payload into the U-Boot from
a web server, which may be more convenient or easier to set up
than TFTP server. The later is enabled to future proof the IP
stack on this platform.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Enable support for TCP protocol, wget, and IPv6 on this platform.
The former two allow users download payload into the U-Boot from
a web server, which may be more convenient or easier to set up
than TFTP server. The later is enabled to future proof the IP
stack on this platform.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
old_dtb can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Avoid a pylint error reported by current pylint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
old_dtb can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Avoid a pylint error reported by current pylint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
old_val can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
'acpi dump' without parameter results in a NULL dereference. Check the
number of arguments.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
efi_get_var() allocates memory which has to be freed after the value of
the variable is consumed. Free the memory properly
Fixes: f2bfa0cb17 ("bootstd: Make efi_mgr bootmeth work for non-sandbox setups")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Mention TI_DM argument can be used to fetch a custom DM binary in the
A72 build instructions for K3 devices.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Move the DM entry in tispl.bin FIT image from default fetching an
external blob entry to fetching using ti-dm entry type. This way, the
DM entry will be populated by the TI_DM pathname if provided. Else it
will resort to the ti-dm.bin file.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
K3 devices introduces the concept of centralized power, resource and
security management to System Firmware. This is to overcome challenges
by the traditional approach that implements system control functions on
each of the processing units.
The software interface for System Firmware is split into TIFS and DM. DM
(Device Manager) is responsible for resource and power management from
secure and non-secure hosts. This additional binary is necessary for
specific platforms' ROM boot images and is to be packaged into tispl.bin
Add an entry for DM. The entry can be used for the packaging of
tispl.bin by binman along with ATF and TEE.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
ACPI tables may comprise either RSDT, XSDT, or both. The current code fails
to check the presence of the RSDT table before accessing it. This leads to
an exception if the RSDT table is not provided.
The XSDT table takes precedence over the RSDT table.
The return values of list_rsdt() and list_rsdp() are always zero and not
checked. Remove the return values.
Addresses in the XSDT table are 64-bit. Adjust the output accordingly.
As the RSDT table has to be ignored if the XSDT command is present there is
no need to compare the tables in a display command. Anyway the
specification does not require that the sequence of addresses in the RSDT
and XSDT table are the same.
The FACS table header does not provide revision information. Correct the
description of dump_hdr().
Adjust the ACPI test to match the changed output format of the 'acpi list'
command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The size of the ACPI table header is not a multiple of 8. We have to mark
struct acpi_xsdt as packed to correctly access field Entry.
Add a unit test for the offsets of field Entry in the RSDT and XSDT tables.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
A new release has been done with this version, so update it. Use the
version numbers in dependencies also.
Signed-off-by: Simon Glass <sjg@chromium.org>
The files list is incorrect and dates from a time when the script was
run from a different directory. Update it to match all the other tools.
Signed-off-by: Simon Glass <sjg@chromium.org>
The test_util module is actually imported by some tools, e.g. binman so
include it in the pip release.
The patman tool uses its test code when starting up, so keep that too.
Show a list of deleted files so it is clear what is happening.
Signed-off-by: Simon Glass <sjg@chromium.org>
Correct a heading which is too short in the readme.
Fixes: 75554dfac2 ("patman: Add support for building a u_boot_tools...")
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a unit test for acpi_find_table()
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The RSDT table is deprecated and does not exist on all systems.
By preference scan XSDT for the table to find. If no XSDT table exists, try
to use the RSDT table.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
* Converting to void * is superfluous when calling memset().
* acpi_fill_header() already fills oem_table_id.
Fixes: d953137526 ("x86: Move SSDT table to a writer function")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The field RsdtAddress has only 32 bit. The RSDT table cannot be located
beyond 4 GiB.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This may as well happen before the general event is emitted, so move it.
This will allow us to use the livetree for the event part, but the
flattree for the earlier part.
Signed-off-by: Simon Glass <sjg@chromium.org>
This code dates from around 2008:
56844a22b7 powerpc: Fix bootm to boot up again with a Ramdisk
Since then we have added FDT relocation which provides enough space
for expansion. We have also added all sorts of fixups earlier in
image_setup_libfdt() which require more space, with ramdisk being the
least of them.
Therefore this extra hack for ramdisk seems unnecessary. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Check the header before starting to use it, since this could provide
very confusing later, when ofnode calls start to fail.
Signed-off-by: Simon Glass <sjg@chromium.org>
Function acpi_get_rsdp_addr() is needed on all architectures which
write ACPI tables. Move the definition from the x86 include to an
architecture independent one.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allow showing a menu and automatically booting, with 'bootflow scan'.
This is more convenient than using a script.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
These tests cannot work on x86 machines as memory at address zero is
not writable. Add a condition to skip these.
Signed-off-by: Simon Glass <sjg@chromium.org>
These tests are marked as driver model tests, but have nothing to do
with driver model. As a result, they are run as part of 'ut dm' which
only exists for sandbox.
Move them to the 'lib' suite and drop the requirement for initing
devices, since they don't use devices.
Also put the lib_test_lmb_max_regions() macro inside the same #ifdef
as its function, to avoid a build error if the condition is false.
Signed-off-by: Simon Glass <sjg@chromium.org>
This needs test devices which are only present on sandbox. Add a check
for this and skip just this test if running on a real board.
Signed-off-by: Simon Glass <sjg@chromium.org>
The error that this test checks for is only shown on sandbox. For real
boards, there is normally no error. Add a special case to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Calling into sub-test functions should be done using ut_assertok() so
that the test exits immediately on failure. Add those which are
missing.
Signed-off-by: Simon Glass <sjg@chromium.org>
This test assumes that the stack pointer is the same across two calls
to lmb_init_and_reserve() but this is not the case on x86, for example.
Add a special case to handle this, along with a detailed comment.
Signed-off-by: Simon Glass <sjg@chromium.org>
