These make use of disk images which are not available on reak boards.
Add a new Kconfig to ensure these tests only run where they are valid.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sometimes we need to skip to a line but it includes addresses or other
information which can vary depending on the runtime conditions.
Add a new ut_assert_skip_to_linen() which is similar to the existing
ut_assert_skip_to_line() function but only checks that the console line
matches up to the length of the provided string.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new suite for 'cmd' tests, used for testing commands. These are
kept in the test/cmd directory.
For now it is empty, but it will be used for coreboot-command tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Technexion PICO-IMX7 SoM is supporting USDHC3 (eMMC or micro SD on SoM)
and USDHC1 (SD on carrier board) to use on any carrier board like
PICO-NYMPH. Based on the U-Boot version from Technexion it adds
baseboard SD card boot detect to able to boot from selected USDHC1
or USDHC3 boot devices.
Signed-off-by: Benjamin Szőke <egyszeregy@freemail.hu>
Tested-by: Fabio Estevam <festevam@gmail.com>
Selecting CONFIG_IMX_HAB=y on a SPL target, such as apalis_imx6_defconfig,
for example, leads to the following build error:
/usr/bin/arm-linux-gnueabihf-ld.bfd: arch/arm/mach-imx/hab.o: in function `imx_hab_is_enabled':
arch/arm/mach-imx/hab.c:879: undefined reference to `fuse_read'
fuse_read() comes from SPL_MXC_OCOTP, which depends on SPL_DRIVERS_MISC,
since commit 251a3053b1 ("misc: imx: remove DM dependency for ocotp
driver in SPL").
Select SPL_DRIVERS_MISC in the SPL case to fix this build issue.
Reported-by: Lisandro Pérez Meyer <lpmeyer@ics.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Tested-by: Lisandro Pérez Meyer <lpmeyer@ics.com>
The tool works for me, with imx28 and NAND memory, but the resulting
blocks are reported as bad, both by u-boot and the kernel.
This makes it impossible to erase from Linux (for an upgrade without
console access, for example -- u-boot can "nand scrub" but linux can't).
pre-filling with 0xff creates a proper boot loader image, but no
bad-block marker is there when written to flash.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
The MXS starts with CPSR V bit set, which makes the CPU jump to high vectors
in case of an exception. Those high vectors are located at 0xffff0000, which
is where the BootROM exception table is located as well. U-Boot should handle
exceptions on its own using its own exception handling code, which is located
at 0x0, i.e. at low vectors. Clear the CPSR V bit, so that the CPU would jump
to low vectors on exception instead, and therefore run the U-Boot exception
handling code.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
To quote the author:
It would be useful to be able to boot an OS when CONFIG_CMDLINE is
disabled. This could allow reduced code size.
Standard boot provides a way to handle programmatic boot, without
scripts, so such a feature is possible. The main impediment is the
inability to use the booting features of U-Boot without a command line.
So the solution is to avoid passing command arguments and the like to
code in boot/
A similar process has taken place with filesystems, for example, where
we have (somewhat) separate Kconfig options for the filesystem commands
and the filesystems themselves.
This series starts the process of refactoring the bootm logic so that
it can be called from standard boot without using the command line.
Mostly it removes the use of argc, argv and cmdtbl from the internal
logic.
Some limited tidy-up is included, but this is kept to smaller patches,
rather than trying to remove all #ifdefs etc. Some function comments
are added, however.
A simple programmatic boot is provided as a starting point.
This work will likely take many series, so this is just the start.
Size growth with this series for firefly-rk3288 (Thumb2) is:
arm: (for 1/1 boards) all +23.0 rodata -49.0 text +72.0
This should be removed by:
https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/11
but it is not included in this series as it is already large enough.
No functional change is intended in this series.
Changes in v3:
- Add a panic if programmatic boot fails
- Drop RFC tag
Changes in v2:
- Add new patch to adjust position of unmap_sysmem() in boot_get_kernel()
- Add new patch to obtain command arguments
- Fix 'boot_find_os' typo
- Pass in the command name
- Use the command table to provide the command name, instead of "bootm"
Add some functions which provide an argument to a command, or NULL if
the argument does not exist.
Use the same numbering as argv[] since it seems less confusing than the
previous idea.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>
At present bootstd requires CONFIG_CMDLINE to operate. Add a new
'programmatic' boot which can be used when no command line is available.
For now it does almost nothing, since most bootmeths require the
command line.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than passing the full list of command arguments, pass only those
which are needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Move this code into a function to reduce code size and make it easier
to understand. Drop the unnecessary 0x to help a little with code size.
Use this in bootm_find_images()
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.
Ultimately this will allow usage of this function without being called
from the command line.
Move the function comment to the header file and tidy it a little.
Signed-off-by: Simon Glass <sjg@chromium.org>
The normal bootm flow calls bootm_find_other() can call the
BOOTM_STATE_FINDOTHER state as part of its processing. Fix the
condition there so that this hack can be removed.
Also drop the confusing check for the OS type, since do_bootm_tee() is
only called if the condition is met - see bootm_os_get_boot_func()
Signed-off-by: Simon Glass <sjg@chromium.org>
The normal bootm flow calls bootm_find_other() can call the
BOOTM_STATE_FINDOTHER state as part of its processing. Fix the
condition there so that this hack can be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
The Android mechanism uses the loadaddr envrionment-variable to get the
load address, if none is provided. This is equivalent to
image_load_addr so use that instead, converting it to a string as
needed.
This change will permit passing img_addr to this function, in a future
change.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function only uses two arguments. The 'arch' always has a constant
value, so drop it. This simplifies the function call.
Tidy up the function comment while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function only uses two arguments. The 'arch' always has a constant
value, so drop it. This simplifies the function call.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function only uses one argument from bootm (argv[2]) so pass it in
directly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Rather than having boot_get_fdt() calculate this, move the calculation
into the caller. This removes the access to argv[0] in this function,
so we can later refactor it to just accept argv[2] instead of the whole
argv[].
Move the function comment to the header file and fix the u8 argument,
while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The OF_LIBFDT #ifdef makes it harder to use a local variable for that
code block. Convert it to if() instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Most of the fdt_support.h header file is included only if OF_LIBFDT or
OF_CONTROL are enabled. This means that calling functions defined in
that file must happen inside an #ifdef
This is unnecessary, so reduce the condition to just !USE_HOSTCC
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function normally only uses one argument so pass it in directly.
Move comments to the header file so could one day include these
functions in API docs. Fix up the u8 argument while here, since it
avoids the compiler having to mask the value on some machines.
The Android case here is bit strange, since it can use argv[0], so deal
with that in the caller.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The same error message is printed in two places. Move it out to the
caller so we can avoid passing in the command name. Leave the bootstage
handling where it is.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This is a misnomer since we don't necessarily know that the image is a
FIT. Use the existing BOOTSTAGE_ID_CHECK_IMAGETYPE instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Rather than looking for a zero-sized image, use the error code returned
to determine if things are OK.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
These unmaps should happen regardless of the return value. Move them
before the 'return' statement.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function obtains lots of error codes and then throws them away.
Update it to return the error, moving the image pointer to an
argument.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Put a list of these in the function documentation so it is easier to
decode what went wrong.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function only uses one argument and just needs to know the name of
the command which called it. Adjust the function to use only what it
needs. This will make it easier to call from a non-command context.
Tidy up the function comment while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function does not modify its first argument, so mark it const. Also
move the comments to the header file and expand them to provide more
useful information.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Move this code and image_get_kernel() higher in the file to avoid the
need for a forward declaration.
No attempt is made to remove #ifdefs or adjust the code in any other
way.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Move the argument decoding to the caller, to avoid needing to pass the
command-line arguments.
Add a function comment while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function does not use its arguments. Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add a dm/uclass-id.h to the bootdev header file, since it uses
enum uclass_id
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The U_BOOT_CMD_COMPLETE() macro has a semicolon at the end, perhaps
inadvertently. Some code has taken advantage of this.
Tidy this up by dropping the semicolon from the macro and adding it to
macro invocations as required.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The declaration of U_BOOT_ENV_LOCATION() uses a different #ifdef
condition from the code it calls. Use the same condition to avoid a
build warning if CONFIG_CMD_SAVEENV is disabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This option is defined in both SPL and TPL builds, so correct the docs
related to this. Also point to spl_phase() which is normally a better
option. Mention VPL as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Since we can now cleanly disable CMDLINE when needed, drop the rules
which discard the command code. It will not be built in the first
place.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
To quote the author:
I wanted to add support for ti,lp5562, and found an old submission
from Doug. While trying to modify that to work in current U-Boot, I
found a problem with the "move label handling to core" patches.
Patch 1 is a prerequisite for the ti,lp5562 driver, which turned out
to be needed by Christian as well.
Patch 2 is an attempt at (quick-)fixing the mentioned "move label
handling to core" problem. The real fix consists of changing remaining
drivers to not bind the same driver to the top node as to the child
nodes, but I can't test those other drivers.
Patch 3 introduces a helper which should allow removing some
boilerplate in most individual drivers, and 4,5 apply that in the gpio
and pwm drivers. Converting remaining drivers is trivial, but left out
for now.
Finally patch 6 is the reworked lp5562 driver. While I've changed it
to match existing DT bindings (with the goal of making it work with
our .dts that is known to work with the linux driver), most of the
logic is unchanged from Doug's original patch, so he is still listed
as author.
Changes in v2: Interchange order of patches 1 and 2, add a few R-bs,
and try to trim down the commit message in patch 2.
Driver for the TI LP5562 4 channel LED controller. Supports
independent on/off control of all 4 channels. Supports LED_BLINK on 3
independent channels: blue/green/red. The white channel can blink, but
shares the blue channel blink rate.
Heavily based on patch originally from Doug Zobel [1].
I have modified it so it matches the DT bindings in the linux tree,
and also follows the linux driver implementation more closely. This
should address Tom's concerns, and also matches my goal of making the
U-Boot driver work with our existing .dts which is known to work in
linux.
As our boards only have the R,G,B outputs connected, I have not
actually tested how the white channel behaves, but the R,G,B work
exactly as expected.
[1] https://lore.kernel.org/u-boot/1547150757-1561-1-git-send-email-douglas.zobel@climate.com/
Cc: Doug Zobel <douglas.zobel@climate.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Use the helper led_bind_generic() to reduce code duplication.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Use the helper led_bind_generic() to reduce code duplication.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
All existing drivers in drivers/led/ contain a .bind method that does
exactly the same thing, with just the actual driver name
differing. Create a helper so all those individual methods can be
changed to one-liners.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Many existing drivers, and led-uclass itself, rely on uc_plat->label
being NULL for the device representing the top node, as opposed to the
child nodes representing individual LEDs. This means that the drivers
whose .probe methods rely on this were broken by commit 83c63f0d11
("led: Move OF "label" property parsing to core"), and also that the top
node wrongly shows up with 'led list'.
Binding the same driver to the top node as to the individual child
nodes is arguably wrong, and the approach of using a UCLASS_NOP driver
for the top node is probably better - this has for example been done in
commit 0107469780 ("led: gpio: Use NOP uclass driver for top-level
node") and commit 910b01c27c ("drivers: led: bcm6753: do not use null
label to find the top")
Until remaining affected drivers are fixed, we can use a heuristic
that only sets the label to the fallback value derived from the node
name if the node does not have a "compatible" property - i.e., if it
has been bound to the LED driver explicitly via
device_bind_driver_to_node(). This is similar to what commit
e3aa76644c ("led: gpio: Check device compatible string to determine
the top level node") did for gpio_led, but that fix was then supplanted
by commit 0107469780 ("led: gpio: Use NOP uclass driver for top-level
node")
Fixes: 83c63f0d11 ("led: Move OF "label" property parsing to core")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
If the driver's own .bind method has populated uc_plat->label, don't
override that. This is necessary for an upcoming driver for ti,lp5562,
where the DT binding unfortunately says to use "chan-name" and not
"label".
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Display port is using topsw_lsbus clock, it is failing
while enabling the clock, so enable the topsw_lsbus clock.
Signed-off-by: Sreekanth Sunnam <sreekanth.sunnam@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20231204084515.9488-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
