Commit graph

70 commits

Author SHA1 Message Date
Tom Rini
1d457dbb91 global: Migrate CONFIG_MAX_MEM_MAPPED to CFG
Perform a simple rename of CONFIG_MAX_MEM_MAPPED to CFG_MAX_MEM_MAPPED

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
308520b8f2 global: Remove unused CONFIG symbols
This removes the following unreferenced CONFIG symbols:
   CONFIG_FDTADDR
   CONFIG_FDTFILE
   CONFIG_FLASH_SECTOR_SIZE
   CONFIG_FSL_CPLD
   CONFIG_HDMI_ENCODER_I2C_ADDR
   CONFIG_I2C_MVTWSI
   CONFIG_I2C_RTC_ADDR
   CONFIG_IRAM_END
   CONFIG_IRAM_SIZE
   CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
   CONFIG_L1_INIT_RAM
   CONFIG_MACB_SEARCH_PHY
   CONFIG_MIU_2BIT_21_7_INTERLEAVED
   CONFIG_MTD_NAND_VERIFY_WRITE
   CONFIG_MVGBE_PORTS
   CONFIG_NETDEV
   CONFIG_NUM_DSP_CPUS
   CONFIG_PHY_BASE_ADR
   CONFIG_PHY_INTERFACE_MODE
   CONFIG_PSRAM_SCFG
   CONFIG_RAMBOOT_SPIFLASH
   CONFIG_RAMBOOT_TEXT_BASE
   CONFIG_RD_LVL
   CONFIG_ROCKCHIP_SDHCI_MAX_FREQ
   CONFIG_SETUP_INITRD_TAG
   CONFIG_SH_QSPI_BASE
   CONFIG_SMDK5420
   CONFIG_SOCRATES
   CONFIG_SPI_ADDR
   CONFIG_SPI_FLASH_QUAD
   CONFIG_SPI_FLASH_SIZE
   CONFIG_SPI_HALF_DUPLEX
   CONFIG_SPI_N25Q256A_RESET
   CONFIG_TEGRA_SLINK_CTRLS
   CONFIG_TPM_TIS_BASE_ADDRESS
   CONFIG_UBOOT_SECTOR_COUNT
   CONFIG_UBOOT_SECTOR_START
   CONFIG_VAR_SIZE_SPL
   CONFIG_VERY_BIG_RAM

And also:
   BL1_SIZE
   PHY_NO
   RESERVE_BLOCK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
2f420f135f net: tsec: Remove non-DM_ETH support code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.  Doing this removes some board support code
which was also unused. Finally, this removes some CONFIG symbols that
otherwise needed to be migrated to Kconfig, but were unused in code now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00
Tom Rini
65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
ecc8d425fd global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and
CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many
cases they likely should come from the device tree instead. Move these
out of CONFIG namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
91092132ba global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
6cc04547cb global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
c6eec0182a Convert CONFIG_SYS_FSL_MAX_NUM_OF_SEC to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_MAX_NUM_OF_SEC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
8b549c0b23 Remove CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR et al
This removes the following symbols:
   CONFIG_SYS_FSL_DSPI_BE
   CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
   CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR
   CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET
   CONFIG_SYS_FSL_DSP_DDR_ADDR
   CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
   CONFIG_SYS_FSL_DSP_M3_RAM_ADDR
   CONFIG_SYS_FSL_ERRATUM_A008751
   CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
   CONFIG_SYS_FSL_ESDHC_NUM
   CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
   CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET
   CONFIG_SYS_FSL_ISBC_VER
   CONFIG_SYS_FSL_QSPI_LE
   CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR
   CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET
   CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET
   CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR
   CONFIG_SYS_FSL_SRDS_NUM_PLLS
   CONFIG_SYS_FSL_WDOG_BE
   CONFIG_SYS_GP1DIR
   CONFIG_SYS_GP1ODR
   CONFIG_SYS_GP2DIR
   CONFIG_SYS_GP2ODR
   CONFIG_SYS_HALT_BEFOR_RAM_JUMP
   CONFIG_SYS_HMI_BASE
   FSL_QSPI_FLASH_NUM
   FSL_QSPI_FLASH_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
923a855509 Convert CONFIG_SYS_FSL_CCSR_GUR_BE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_CCSR_GUR_BE
   CONFIG_SYS_FSL_CCSR_SCFG_BE
   CONFIG_SYS_FSL_ESDHC_BE
   CONFIG_SYS_FSL_IFC_BE
   CONFIG_SYS_FSL_PEX_LUT_BE
   CONFIG_SYS_FSL_CCSR_GUR_LE
   CONFIG_SYS_FSL_CCSR_SCFG_LE
   CONFIG_SYS_FSL_ESDHC_LE
   CONFIG_SYS_FSL_IFC_LE
   CONFIG_SYS_FSL_PEX_LUT_LE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:48 -04:00
Tom Rini
f1c6dfa426 layerscape: Remove some unused CONFIG symbols
All of these symbols are not referenced anywhere else in the code, so
remove them.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
601483ffd5 Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_KEY_REVOCATION
   CONFIG_SYS_FSL_SFP_BE
   CONFIG_SYS_FSL_SFP_LE
   CONFIG_SYS_FSL_SFP_VER_3_0
   CONFIG_SYS_FSL_SFP_VER_3_2
   CONFIG_SYS_FSL_SFP_VER_3_4
   CONFIG_SYS_FSL_SRK_LE

This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for
when CHAIN_OF_TRUST is enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:00 -04:00
Tom Rini
c9f85187e2 Convert CONFIG_SYS_FSL_SEC_MON et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_SEC_MON
   CONFIG_SYS_FSL_SEC_MON_BE
   CONFIG_SYS_FSL_SEC_MON_LE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:00 -04:00
Tom Rini
3371eddaa1 Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MAX_CONTROLLER_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
093044735f usb: ehci-fsl: Remove non-DM code
The deadline for DM_USB migration has passed and all users have been
migrated.  Remove now unused code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Simon Glass
77f46f0607 video: fsl: colibri_vf: Drop FSL DCU driver
This does not use driver model and is more than two years past the
migration date. Drop it.

It can be added back later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:18:07 +02:00
Simon Glass
edca8cf721 Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SCSI_AHCI_PLAT
   CONFIG_SYS_SCSI_MAX_SCSI_ID
   CONFIG_SYS_SCSI_MAX_LUN
   CONFIG_SYS_SATA_MAX_DEVICE

Drop CONFIG_SCSI for everything except the sandbox build. We only need
one build for tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:48 -05:00
Simon Glass
ce30e3ff1e scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE
This is defined based on two other CONFIGs for all boards except sandbox
and durian.

For sandbox the value does not matter. For durian the value seems
excessive.

Drop the option completely, to simplify configuration and reduce the
number of things we need to convert to Kconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09 09:16:48 -05:00
Tom Rini
be7dbb60c5 Convert CONFIG_SYS_IMMR to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_IMMR

We do this by consolidating the SYS_IMMR options we have and providing
defaults.

We also, in the few places where M68K was also sharing code with these
platforms, define it within the file to CONFIG_SYS_MBAR to match usage.
This should be cleaned up longer term.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Kuldeep Singh
c93ad777b8 treewide: Remove unused FSL QSPI config options for Layerscape platforms
Some of these options are not used by the driver anymore and some of
them are obsolete as the information is gathered from the dt. Also
consolidating defines in common headers.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:05 +05:30
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tuomas Tynkkynen
b82e667f79 ata: Migrate CONFIG_LIBATA to Kconfig
This symbol enables some library code used by various SATA drivers,
so make this a non-user-visible symbol select'ed by the respective
drivers, and let moveconfig handle the rest.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:16:05 -05:00
Tuomas Tynkkynen
9fd95ef0d3 ata: Migrate CONFIG_SCSI_AHCI to Kconfig
And use 'imply' liberally.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:13:19 -05:00
Ashish Kumar
63b2316c5c fsl-layerscape: Consolidate registers space defination for CCI-400 bus
CoreLink Cache Coherent Interconnect (CCI) provides full cache
coherency between two clusters of multi-core CPUs and I/O coherency
for devices and I/O masters.

This patch add new config option SYS_FSL_HAS_CCI400 and moves
existing register space definaton of CCI-400 bus to fsl_immap to be
shared. CONFIG_SYS_CCI400_ADDR is replaced with SYS_CCI400_OFFSET
in Kconfig.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
[YS: revised commit message, squashed patches for armv8 and armv7]
Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11 07:55:36 -07:00
Simon Glass
fedb428c5b Convert CONFIG_SCSI to Kconfig
This converts the following to Kconfig:
   CONFIG_SCSI

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
York Sun
73fb583829 armv7: ls1021a: Drop macro CONFIG_LS102XA
Use CONFIG_ARCH_LS1021A instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17 09:03:30 -07:00
Patrick Delaunay
b0cf733933 disk: convert CONFIG_DOS_PARTITION to Kconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28 08:47:34 -05:00
Jagan Teki
3788b451e3 config: Move CONFIG_BOARD_LATE_INIT to defconfigs
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-21 15:12:33 -05:00
York Sun
ba1b6fb5cc arm: layerscape: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig
Use Kconfig to select errata workaround.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:42 -05:00
York Sun
90b80386ff crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig
Use Kconfig option to set little- or big-endian access to secure
boot and trust architecture.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:19 -05:00
York Sun
2c2e2c9e14 crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig
Instead of define CONFIG_SYS_FSL_SEC_COMPAT in header files for PowerPC
and ARM SoCs, move it to Kconfig under the driver.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-01-04 19:40:17 -05:00
York Sun
53d76829d5 armv7: ls1021a: Move DDR config options to Kconfig
Move DDR3, DDR4 and related config options to Kconfig and clean up
existing uses.

Signed-off-by: York Sun <york.sun@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-06 09:59:11 -07:00
York Sun
f534b8f5fd arm: Move SYS_FSL_SRDS_* and SYS_HAS_SERDES to Kconfig
Move these options to Kconfig and clean up existing uses.

Signed-off-by: York Sun <york.sun@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-06 09:59:11 -07:00
York Sun
b4b60d06c6 arm: Move MAX_CPUS to Kconfig
Move MAX_CPUS option to Kconfig and clean up existing uses for ARM. This
option is used by Freescale Layerscape SoCs.

Signed-off-by: York Sun <york.sun@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-06 09:59:10 -07:00
York Sun
295a24b3d6 armv7: ls102xa: Rename GIC_ADDR and DCSR_RCPM_ADDR
Instead of using CONFIG_* name space, rename these two macros to
SYS_FSL_* space.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26 08:53:07 -07:00
York Sun
0a37cf8f27 Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig option
Move this option to Kconfig and clean up existing uses.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2016-09-26 08:53:07 -07:00
Shengzhou Liu
93a6d3284c armv7:ls1021a: Enable workaround for DDR erratum A-009942
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:08:15 -07:00
Hongbo Zhang
349cfc973f nxp: ls102xa: add registers definition for system sleep
This patch adds definitions of all the regesters necessary for
system sleep.

Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:07:35 -07:00
Hou Zhiqiang
b392a6d4b0 fsl-layerscape: Add workaround for PCIe erratum A010315
As the access to serders protocol unselected PCIe controller will
hang. So disable the R/W permission to unselected PCIe controller
including its CCSR, IO space and memory space according to the
serders protocol field of RCW.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:07:13 -07:00
Tom Rini
067716bac5 ARM: Move SYS_CACHELINE_SIZE over to Kconfig
This series moves the CONFIG_SYS_CACHELINE_SIZE.  First, in nearly all
cases we are mirroring the values used by the Linux Kernel here.  Also,
so long as (and in this case, it is true) we implement flushes in hunks
that are no larger than the smallest implementation (and given that we
mirror the Linux Kernel, again we are fine) it is OK to align higher.
The biggest changes here are that we always use 64 bytes for CPU_V7 even
if for example the underlying core is only 32 bytes (this mirrors
Linux).  Second, we say ARM64 uses 64 bytes not 128 (as found in the
Linux Kernel) as we do not need multi-platform support (to this degree)
and only the Cavium ThunderX 88xx series has a use for such large
alignment.

Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Stefan Roese <sr@denx.de>
Cc: Nagendra T S <nagendra@mistralsolutions.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Steve Rae <steve.rae@raedomain.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Heiko Schocher <hs@denx.de>
Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Paul Kocialkowski <contact@paulk.fr>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Robert Baldyga <r.baldyga@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Thomas Weber <weber@corscience.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: David Feng <fenghua@phytium.com.cn>
Cc: Alison Wang <b18965@freescale.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: York Sun <york.sun@nxp.com>
Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Aneesh Bansal <aneesh.bansal@freescale.com>
Cc: Saksham Jain <saksham.jain@nxp.com>
Cc: Qianyu Gong <qianyu.gong@nxp.com>
Cc: Wang Dongsheng <dongsheng.wang@nxp.com>
Cc: Alex Porosanu <alexandru.porosanu@freescale.com>
Cc: Hongbo Zhang <hongbo.zhang@nxp.com>
Cc: tang yuantian <Yuantian.Tang@freescale.com>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Hannes Schmelzer <oe5hpm@oevsv.at>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Christophe Ricard <christophe-h.ricard@st.com>
Cc: Anand Moon <linux.amoon@gmail.com>
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Carlo Caione <carlo@endlessm.com>
Cc: huang lin <hl@rock-chips.com>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Xu Ziyuan <xzy.xu@rock-chips.com>
Cc: "jk.kernel@gmail.com" <jk.kernel@gmail.com>
Cc: "Ariel D'Alessandro" <ariel@vanguardiasur.com.ar>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Samuel Egli <samuel.egli@siemens.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Bernhard Nortmann <bernhard.nortmann@web.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Whitten <ben.whitten@gmail.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Carlos Hernandez <ceh@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Ash Charles <ashcharles@gmail.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Daniel Allred <d-allred@ti.com>
Cc: Gong Qianyu <Qianyu.Gong@freescale.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Chin Liang See <clsee@altera.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Paul Kocialkowski <contact@paulk.fr>
2016-08-26 17:04:46 -04:00
Hongbo Zhang
3288628a8d ARMv7: PSCI: ls102xa: move secure text section into OCRAM
LS1021 offers two secure OCRAM blocks for trustzone.
This patch moves all the secure text sections into the OCRAM.

Signed-off-by: Wang Dongsheng <dongsheng.wang@nxp.com>
Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:03:00 -07:00
Hongbo Zhang
aeb901f2a6 ARMv7: PSCI: ls102xa: add more PSCI v1.0 functions implemention
This patch implements PSCI functions for ls102xa SoC following PSCI v1.0,
they are as the list:
    psci_version,
    psci_features,
    psci_cpu_suspend,
    psci_affinity_info,
    psci_system_reset,
    psci_system_off.

Tested on LS1021aQDS, LS1021aTWR.

Signed-off-by: Wang Dongsheng <dongsheng.wang@nxp.com>
Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:02:49 -07:00
Rajesh Bhagat
9729dc9565 include: usb: Rename USB controller base address mapping
Remove Soc specific defines and use generic chasis specific defines
for USB controller base address mapping.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:01:04 -07:00
Tom Rini
fc15b9beed Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-05-24 13:42:03 -04:00
Alex Porosanu
404bf4547e arch/arm, arch/powerpc: add # of SEC engines on the SOC
Some SOCs, specifically the ones in the C29x familiy can have
multiple security engines. This patch adds a system configuration
define which indicates the maximum number of SEC engines that
can be found on a SoC.

Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:46 -07:00
Alex Porosanu
e99d719359 arch/arm: add SEC JR0 offset
Freescale PPC SoCs do not hard-code security engine's Job Ring 0
address, rather a define is used. This patch adds the same
functionality to the ARM based SoCs (i.e. LS1/LS2 and i.MX parts)

Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:46 -07:00
Simon Glass
c649e3c91c dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI
This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Tom Rini
89cb2b5f8b configs: Re-sync with cmd/Kconfig
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:47 -04:00
Alison Wang
b2f3addbb2 arm: ls102xa: fdt: Update FSL_QSPI_COMPAT and FSL_DSPI_COMPAT
As the compatible property values for QSPI and DSPI dts nodes
are changed in kernel, FSL_QSPI_COMPAT and FSL_DSPI_COMPAT
need to be updated too.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21 12:42:11 -07:00
Shengzhou Liu
a994b3deb0 driver/ddr/fsl: Add workaround for A009663
Erratum A-009663 workaround requires to set DDR_INTERVAL[BSTOPRE] to 0
before setting DDR_SDRAM_CFG[MEM_EN] and set DDR_INTERVAL[BSTOPRE]
to the desired value after DDR initialization has completed.

When DDR controller is configured to operate in auto-precharge
mode(DDR_INTERVAL[BSTOPRE]=0), this workaround is not needed.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:15 -08:00