Commit graph

247 commits

Author SHA1 Message Date
Michal Simek
085b2b8287 ARM: zynq: Setup modeboot variable based on boot mode
modeboot variable is used for saving inforation which bootmode
is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:12 +01:00
Sai Pavan Boddu
36458cef1b microblaze: Make the board configuration name user definable
Add a prompt for editing in menuconfig

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Nathan Rossi
950f86ca38 ARM64: zynqmp: Replace board specific with generic memory bank decoding
The dram_init and dram_init_banksize functions were using a board
specific implementation for decoding the memory banks from the fdt. This
board specific implementation uses a static variable 'tmp' which makes
these functions unsafe for execution from within the board_init_f
context.

This change makes the dram_init* functions use a generic implementation
of decoding and populating memory bank and size data.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Fixes: 8d59d7f63b ("ARM64: zynqmp: Read RAM information from DT")
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-20 09:15:28 +01:00
Nathan Rossi
de9bf1b591 ARM: zynq: Replace board specific with generic memory bank decoding
The dram_init and dram_init_banksize functions were using a board
specific implementation for decoding the memory banks from the fdt. This
board specific implementation uses a static variable 'tmp' which makes
these functions unsafe for execution from within the board_init_f
context.

This unsafe use of a static variable was causing a specific bug when
using the zynq_zybo configuration, U-Boot would generate the following
error during image load. This was caused due to dram_init overwriting
the relocations for the 'image' variable within the do_bootm function.
Out of coincidence the un-initialized memory has a compression type
which is the same as the value for the relocation type R_ARM_RELATIVE.

   Uncompressing Invalid Image ... Unimplemented compression type 23

It should be noted that this is just one way the issue could surface,
other cases my not be observed in normal boot flow. Depending on the
size of various sections, and location of relocations within __rel_dyn
and the compiler/linker the outcome of this bug can differ greatly.

This change makes the dram_init* functions use a generic implementation
of decoding and populating memory bank and size data.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Fixes: 758f29d0f8 ("ARM: zynq: Support systems with more memory banks")
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-20 09:15:28 +01:00
Michal Simek
49c4c78e70 block: Move ceva driver to DM
This patch also includes ARM64 zynqmp changes:
- Remove platform non DM initialization
- Remove hardcoded sata base address

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-20 09:15:27 +01:00
Tom Rini
361a879902 Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"
This reverts commit 3edc0c2522, reversing
changes made to bb135a0180.
2016-12-09 07:56:54 -05:00
Michal Simek
bf0f27f45f ARM64: zynqmp: Add updated psu_init_gpl* files
With origin files there was an issue with serdes setting for SCSI.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-08 10:04:20 +01:00
Michal Simek
8a5db0ab9a zynqmp works 2016-12-08 10:04:20 +01:00
Nathan Rossi
64b67fb24b ARM: zynq: Replace dram_init* functions with board_init_f safe ones
The dram_init* functions for the zynq board are not safe for use from
the board_init_f stage due to its use of the 'tmp' static variable.

This incorrect use of a static variable was causing rare issues where
the dram_init function would overwrite some parts the __rel_dyn section
which caused obscure failures.

Using the zynq_zybo configuration, U-Boot would generate the following
error during image load. This was caused due to dram_init overwriting
the relocations for the "image" variable within the do_bootm function.
Out of coincidence the un-initialized memory has a compression type
which is the same as the value for the relocation type R_ARM_RELATIVE.

   Uncompressing Invalid Image ... Unimplemented compression type 23

It should be noted that this is just one way the issue could surface,
other cases my not be observed in normal boot flow.

This change removes the existing code and copies the implementation of
the dram_init and dram_init_banksize from the
arch/arm/mach-uniphier/dram_init.c source. This version of these
functions does not use static variables and behaves the same (reading
banks from fdt, and using the first bank as the ram_size).

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Fixes: 758f29d0f8 ("ARM: zynq: Support systems with more memory banks")
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-08 10:04:20 +01:00
Michal Simek
8814c03853 block: Move ceva driver to DM
This patch also includes ARM64 zynqmp changes:
- Remove platform non DM initialization
- Remove hardcoded sata base address

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Series-to: sjg, agraf@suse.de
Series-cc: uboot
Series-version: 4
Series-changes: 2
- make ceva_init_sata static
- Move SATA_CEVA to defconfig
- Initalized max_lun and max_id platdata

Series-changes: 3
- Extend Kconfig help description
- sort dm.h
- Remove SPL undefinition from board file
- Fix Kconfig dependecies
2016-12-08 09:23:48 +01:00
Michal Simek
fde6cacde2 ARM64: zynqmp: Use DTS name for different psu_init_gpl* files in SPL
CONFIG_SYS_CONFIG_NAME is not proper config option for different low
level init files because different board revisions requires different
psu_init_gpl* files.

Also at the end of moving drivers to DM all board specific configuration
files should be removed.

The same changes was done for Zynq.
"ARM: zynq: Simplify zynq configuration"
(sha1: ad5b580126)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02 14:35:50 +01:00
Michal Simek
b6f4048b54 ARM64: zynqmp: Ignore warnings from autogenerated files
Autogenerated files contain casting issues and missing function
declaration and even usleep implementation. Suppress them for now
till these files are fixed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:29 +01:00
Michal Simek
47359a0394 ARM64: zynqmp: Fix secondary bootmode enabling
Do not setup use_alt bit which copy alternative boot mode to
boot mode. The reason is that this bit is cleared after POR
but not after any software reset which will cause
that after SW reset bootrom will look for different boot image.

This patch setups alternative boot mode selection (purely SW
handling) and extends code to read this alternative boot mode first and
use it if it is setup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:28:05 +01:00
Siva Durga Prasad Paladugu
e1992276c3 ARM64: zynqmp: Add support for SD1 with level shifters bootmode
Add support for SD1 with level shifters bootmode.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:28:05 +01:00
Michal Simek
8ecd50c8c9 ARM64: zynqmp: Record board name as serial number for DFU/FASTBOOT
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:28:05 +01:00
Soren Brinkmann
0cba6abbba ARM64: zynqmp: Adjust to new SMC interface to get silicon version
The new FW interface returns the IDCODE and version register, leaving
extracting bitfields to the caller.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:28:05 +01:00
Michal Simek
05c59d0bc8 ARM: zynq: Add support for Zynq 7000S 7007s/7012s/7014s devices
Zynq 7000S (Single A9 core) devices is using different ID code.
This patch adds this new codes and assign them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:28:04 +01:00
Alexander Graf
8069821fc2 arm: Provide common PSCI based reset handler
Most armv8 systems have PSCI support enabled in EL3, either through
ARM Trusted Firmware or other firmware.

On these systems, we do not need to implement system reset manually,
but can instead rely on higher level firmware to deal with it.

The exclude list seems excessive right now, but NXP is working on
providing an in-tree PSCI implementation, so that all NXP systems
can eventually use PSCI as well.

Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: fix meson]
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19 09:01:31 +02:00
Alexander Graf
51bfb5b6f5 arm: Disable HVC PSCI calls by default
All systems that are running on armv8 are running bare metal with firmware
that implements PSCI running in EL3. That means we don't really need to expose
the hypercall variants of them.

This patch leaves the code in, but makes the code explicit enough to have the
compiler optimize it out. With this we don't need to worry about hvc vs smc
calling convention when calling psci helper functions.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-18 09:08:08 +02:00
Michal Simek
47e60cbdf8 ARM64: zynqmp: Add support for chip ID detection
Chip ID needs to be known for loading bitstream because
U-Boot checks ID from bitstream header in BIT format.
BIN format is completely unchecked.

The chipid is get from ATF via SMC.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22 07:33:21 +02:00
Michal Simek
d58fc12eb7 ARM64: zynqmp: Add support for DFU from SPL
SPL needs to have bigger stack size because of USB.
Simple malloc needs to be disabled because dfu code requires different
allocation functions. There is no space in OCM that's why random place
in DDR is used.

BOOTD must be disabled because it is causing compilation error.

All variables are disabled and used only variables valid for DFU because
they are simple huge. Including automatic variables added by
CONFIG_ENV_VARS_UBOOT_CONFIG.
Hardcode addresses for u-boot, atf, kernel and dtb
just for SPL DFU code.

Enable SPL DFU for zcu100.
Create new usb_dfu_spl variable just to run Linux kernel loaded in SPL.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22 07:33:21 +02:00
Michal Simek
9feff385f8 ARM64: zynqmp: Fix usb_gadget_handle_interrupt routine
Function is defined in g_dnl.h and have different parameter
then it is used. This patch fixes it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22 07:33:20 +02:00
Michal Simek
275bd6d11f ARM64: zynqmp: Wire up both USBs available on ZynqMP
The second USB wasn't enabled. This patch fixes it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22 07:33:20 +02:00
Michal Simek
33986e2c31 ARM64: zynqmp: Wire up PSCI reset
Using PSCI to reset the system.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-08-02 06:54:34 +02:00
Michal Simek
b72894f14d ARM64: zynqmp: Add support for standard distro boot commands
Nand and QSPI are not defined now but this will be extended.
Based on selected bootmode boot_targets are rewritten.
Patch also contains detection if variables are saved. If yes don't
rewrite boot_targets variable.

Also move variable setup to the end of file because SCSI needs to be
defined before others macros are using it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2016-06-06 11:23:28 +02:00
Michal Simek
ac551e3492 microblaze: Move MSR instruction selection to Kconfig
Select MSR instructions via Kconfig instead of xparameters.h.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:27 +02:00
Michal Simek
4ad1096e48 microblaze: Add option to pass cpu version number
Toolchain can use some flags by default based on cpu version.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:27 +02:00
Michal Simek
91eeb80ee7 microblaze: Select compilation flags via Kconfig
Remove autogenerated config.mk and select CPU options via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:27 +02:00
Michal Simek
ad5b580126 ARM: zynq: Simplify zynq configuration
Extending Kconfig for adding new platform is a lot of work
for nothing. Setting SYS_CONFIG_NAME directly in Kconfig and
remove all dependencies on TARGET_ZYNQ_* options including SPL.
As a side-effect it also remove custom init folder for ps7_init_gpl.*
files. Folder is chosen based on device-tree file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 13:22:50 +02:00
Michal Simek
e6a9ed04e7 ARM64: zynqmp: Add SPL support support
Support RAM and MMC boot mode in SPL also with SPL_FIT images.

In MMC boot mode two boot options are available:
1) Boot flow with ATF(EL3) and full U-Boot(EL2):
 aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin
 mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e 0xfffe5000
 -d bl31.bin atf.ub
 cp spl/boot.bin <sdcard fat partition>
 cp atf.ub <sdcard fat partition>
 cp u-boot.bin <sdcard fat partition>

2) Boot flow with full U-Boot(EL3):
 cp spl/boot.bin <sdcard>
 cp u-boot*.img <sdcard>

3) emmc boot mode
 dd if=/dev/zero of=sd.img bs=1024 count=1024
 parted sd.img mktable msdos
 parted sd.img mkpart p fat32 0% 100%
 kpartx -a sd.img
 mkfs.vfat /dev/mapper/loop0p1
 mount /dev/mapper/loop0p1 /mnt/
 cp spl/boot.bin /mnt
 cp u-boot.img /mnt
 cp u-boot.bin /mnt
 cp atf.ub /mnt
 umount /dev/mapper/loop0p1
 kpartx -d sd.img
 cp sd.img /tftpboot/

 and program it via u-boot
 tftpb 10000 sd.img
 mmcinfo
 mmc write 10000 0 $filesize
 mmc rescan
 mmc part
 ls mmc 0

psu_init() function contains low level SoC setup generated for every HW
design by Xilinx design tools. xil_io.h is only supporting file to fix
all dependencies from tools. The same solution was used on Xilinx Zynq.

The patch also change CONFIG_SYS_INIT_SP_ADDR to the end of OCM which
stays at the same location all the time.
Bootrom expects starting address to be at 0xfffc0000 that's why this
address is SPL_TEXT_BASE.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:01 +02:00
Michal Simek
6919b4bf36 ARM64: zynqmp: Add support for reading MAC from eeprom
Add support for on board eeprom with programmed MAC for using in u-boot
to have uniq address for every board.
Most of the time uniq MAC address is on a label on the board.
If address is not programmed use these command to program it.

On zcu102:
ZynqMP> mm.b 0
00000000: 00 ? 00
00000001: a0 ? 0a
00000002: 35 ? 35
00000003: 02 ? 02
00000004: 00 ? ef
00000005: 00 ? 67
00000006: 00 ? q
i2c dev 5
i2c write 0 54 20 6
i2c md 54 20

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:00 +02:00
Michal Simek
52be5c05a0 ARM64: zynqmp: Remove netdev.h from board file
Including netdev.h is causing compilation warning:
+ int fecmxc_register_mii_postcall(struct eth_device *dev, int
(*cb)(int));
+                                         ^
w+In file included from ../board/xilinx/zynqmp/zynqmp.c:9:0:
w+../include/netdev.h:204:41: warning: ‘struct eth_device’ declared
inside parameter list [enabled by default]
w+../include/netdev.h:204:41: warning: its scope is only this definition
or declaration, which is probably not what you want [enabled by default]

This patch removes it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
658b3a5639 ARM64: zynqmp: Make DDR detection code work on 32bit system
Define u64 types to be usable on 32bit system because of 64bit address
and size cells and 32bit shifts in the code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
758f29d0f8 ARM: zynq: Support systems with more memory banks
This is example how to change u-boot to support more memory banks read
from DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
679b994a2b block: Add support for Ceva sata
Initial Ceva Sata init code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-04 20:28:39 +02:00
Michal Simek
6d3ddfc473 ARM64: zynqmp: Simplify MAINTAINERS file to support more boards
Handle all Xilinx ZynqMP boards with one fragment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Michal Simek
8d59d7f63b ARM64: zynqmp: Read RAM information from DT
Read information about memory from DT. This patch simplify life with
synchronization between DT and board files.

dram_init() only needs maximum RAM size below 4GB that's why please sort
banks in memory node.
dram_init_banksize() copies memory setup to bi_dram[].
This will avoid reading information from DT twice.

Memory test start/end were changed to DDR location to let memtest still
compiled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Michal Simek
a359eaa598 microblaze: Remove !OF_CONTROL code for timer and interrupt
OF_CONTROL is enabled by default that's why this is dead code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Michal Simek
66de226f9f ARM: zynq: Fix default ps7_init_gpl.c/h for ZYBO
There is incorrect setting for USB which didn't work with origin
ps7_init_gpl.X files.
Use default setting for Digilent Zybo projects with HDMI in PL.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Joe Hershberger
a509a1d402 net: gem: Allow to set the MAC from an EEPROM
Provide board specific option how to read MAC address from ROM.
Do it in generic way to be reusable by differnet boards.
If this is not enough board specific functions can be created.

Signed-off-by: Joe Hershberger <joe.hershberger@gmail.com> # driver part
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:27:54 +02:00
Michal Simek
d9f317fd0d ARM: zynq: Read memory size setting from DT
OF_CONTROL is setup by default and memory reading is done via DT. Remove
all config files with memory references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:21:02 +01:00
Ricardo Ribalda Delgado
f36919a813 ppc: xilinx-ppc440-generic: Wire LL_TEMAC driver
If the xparameters file contains a LL_TEMAC definition compile its
driver and the net commands.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:20 +01:00
Ricardo Ribalda Delgado
7e5281fee4 ppc: xilinx_ppc440_generic: Remove uncalled functions
board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not
set. Remove unused function.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:20 +01:00
Ricardo Ribalda Delgado
63053071b2 ppc: xilinx_ppc405_generic: Remove uncalled functions
board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not
set. Remove unused function.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:20 +01:00
Ricardo Ribalda Delgado
28e92109c7 ppc: xilinx_ppc440_generic: Remove weak attributes
Now that the specific boards have been removed there is no need to
maintain the weak functions.

Fix also CamelCase to make checkpatch happy

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:20 +01:00
Ricardo Ribalda Delgado
cd4695da8b ppc: xilinx_ppc405_generic: Remove weak attributes
Now that the specific boards have been removed there is no need to
maintain the weak functions.

Fix also CamelCase to make checkpatch happy

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:20 +01:00
Ricardo Ribalda Delgado
80cce2629b ppc: xilinx-ppc4xx: Port to DM serial
xilinx_uartlite has been ported to DM, this patch makes the
xilinx-ppc405-generic and the xilinx-ppc440-generic boards use the new
DM driver.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:11 +01:00
Michal Simek
5af0855670 ARM: zynq: zynqmp: Line up checkboard message
Use space instead of tab in checkboard print to aligned
it with others boards.

Reported-by: David Glessner <david.glessner@rockwellcollins.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-01-27 15:55:58 +01:00
Michal Simek
cce124b8b3 ARM64: zynqmp: Remove unneeded timer_init function
Empty weak function is used instead.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
2d9925bce3 ARM64: zynqmp: Fix bootmode SD_MODE1
When only sdhci1 IP is enabled and SD_MODE1 bootmode is selected
U-Boot using sdboot1 variable which refers to mmc dev 1.
But this device doesn't exist because only one controller is available.

This patch fix logic around sdboot mode with using sdbootdev internal
variable.

Reported-by: Chris Kohn <ckohn@xilinx.com>
Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00