Commit graph

87946 commits

Author SHA1 Message Date
Chris Morgan
ff27afedff board: rockchip: Add panel auto-detection for Anbernic RGxx3
Add support to automatically detect the panel for the Anbernic RGxx3.
This is done by creating a "pseudo driver" that provides only the bare
minimum to start the DSI controller and DSI DPHY. Once started, we then
can query the panel for its panel ID and compare it to a table of known
values. The panel compatible string (which corresponds to the upstream
Linux driver) is then defined as an environment variable "panel". The
panel compatible string is also changed automatically via an
ft_board_setup() call if what is detected differs from what is in the
loaded tree. This way, end users can use the same bootloader without
having to worry about which panel they have (as there is no obvious
way of knowing).

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Chris Morgan
b190381418 board: rockchip: Add support for RG353PS to RGxx3
Add support for the RG353PS to the Anbernic RGxx3. This device is a
slightly pared down version of the RG353P with no eMMC, no touchscreen,
and only 1GB of RAM.

Refactor board logic so that all supported devices are defined with
ADC values and that future boards can be added by just defining the
board values in the device array.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Chris Morgan
9c87951663 board: rockchip: add DSI and DSI-DPHY for Anbernic RGxx3
Add support for the DSI and DSI-DPHY to U-Boot for the RGxx3. These are
needed so we can send a panel ID request to determine which panel is
being used.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Chris Morgan
59c255ae5f board: rockchip: Correct i2c2 pinctrl for RGxx3
The pinctrl on the Anbernic RGxx3 for the i2c2 bus does not use the
default value, so explicitly define it.

Fixes: 6cf6fe2537 ("board: rockchip: add Anbernic RGXX3 Series Devices")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Eugen Hristev
a6bd5bc988 configs: rock5b-rk3588: enable USB 3.0 controller, command, gadget
Enable configuration for USB 3.0 controller, the commands required,
and the gadget drivers.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Eugen Hristev
32961c09af ARM: dts: rockchip: rk3588-rock-5b-u-boot: add USB3 support
Enable the USB3.0 host node, and gadget node.
The gadget is available through the USB type C connector on the board.
The connector is tied to a Fairchild fusb302b device, which currently
does not have a driver in U-boot, but the node is here for correct
description of the board + Linux future compatibility.
It will be easier to move the node as-is when it will be available
in the DT from Linux

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Joseph Chen
b8bae824cc ARM: dts: rockchip: rk3588: add support for USB 3.0 devices
Add support for the USB 3.0 devices in rk3588:
- USB DRD(dual role device) 3.0 #0 as usbdrd3_0 which is available in
rk3588s
- USB DRD(dual role device) 3.0 #1 as usbdrd3_1 which is available in
rk3588 only
- USB DP PHY (combo USB3.0 and DisplayPort Alt Mode ) #0 phy interface
as usbdp_phy0
- USB DP PHY (combo USB3.0 and DisplayPort Alt Mode ) #1 phy interface
as usbdp_phy1
- USB 2.0 phy #2 , the USB 3.0 device can work with this phy in USB 2.0
mode
- associated GRFs (general register files) for the devices.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
[eugen.hristev@collabora.com: move nodes to right place, adapt from latest
linux kernel]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Frank Wang
7b57ca18f8 phy: rockchip: add usbdp combo phy driver
This adds a new USBDP combo PHY with Samsung IP block driver.
The PHY is a combo between USB 3.0 and DisplayPort alt mode.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
[eugen.hristev@collabora.com: ported to 2023.07, clean-up]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Eugen Hristev
22a5a9724b ARM: dts: rockchip: rk3588: sync with Linux
Sync the devicetree with linux-next tag: next-20230525

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Ondrej Jirman
0825522eea video: rockchip: Add support for RK3399 to dw-mipi-dsi bridge
This just needs some extra clocks enabled, and different registers
configured. Copied from Linux, just like the original submitter
of this driver did for rk3568.

Tested on Pinephone Pro.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@vrull.eu>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Chris Morgan
3c057b4c6c rockchip: board: Update Odroid Go2 to Support Additional Revisions
Update the board.c file for the Odroid Go Advance to support the
Black Edition and the Odroid Go Super. The Odroid Go Advance Black
Edition differs from the original model with the addition of 2
extra buttons and an ESP8266 WiFi module. The Odroid Go Super
adds an additional 2 buttons compared to the Black Edition, along
with a larger panel and larger battery.

This change uses the value of ADC0 to determine which of these
3 models it is, and then changes the ${fdtfile} environment variable
to match the proper devicetree name in mainline Linux.

Tested on an Odroid Go Advance (first revision) and an Odroid Go Super.
The correct ${fdtfile} variable was set for each device.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Eugen Hristev
14bb9c27b7 configs: rock5b-rk3588: add rtl8169 driver
Add the rtl8169 driver, which supports the rtl8125b device, which is
connected on the pciE bus on this board.
Enable also CONFIG_SYS_HAS_NONCACHED_MEMORY to have the descriptors stored.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Nishanth Menon
6e8fa0611f board: ti: k3: Convert boot flow ascii flow to svg
Replace the ascii flow diagram with svg.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:38 +02:00
Nishanth Menon
5c86c57f9d doc: board: ti: k3: Sort the boards in alphabetical order
Keep the boards sorted in alphabetical order.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:38 +02:00
Nishanth Menon
08df746dd1 doc: board: ti: *: Add platform information
Add link to the actual platform for folks to find details about the
board in addition to the SoC's TRM.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:38 +02:00
Nishanth Menon
93d90bf33e doc: board: ti: j7200_evm: Convert the emmc layout to svg
Convert the emmc memory layout to svg

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:38 +02:00
Nishanth Menon
e19efb13c9 doc: board: ti: am65x_evm: Convert the emmc layout to svg
Convert the emmc memory layout to svg

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:38 +02:00
Nishanth Menon
757836d95a doc: board: ti: am65/j721e: Convert OSPI memory map to svg
Convert the memory map for OSPI as a common memory map

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:38 +02:00
Nishanth Menon
fc5b2b8ee5 doc: board: ti: am65x_evm: Convert the UART boot responsibility to list table
Use list tables to map up the UART Boot responsibility table.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
f940ec2f5e doc: board: ti: j7200_evm: Convert switch settings to list tables
Use list tables to map up the dip switch settings

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
36ed8fbf40 doc: board: ti: am62x_sk: Convert switch settings to list tables
Use list tables to map up the dip switch settings

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
d7c3ca985c doc: board: ti: am62x_sk: Add labels to reuse memory map
Add labels around the A53 SPL DDR memory layout to be able to reuse the
memory map.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
34f76921d8 doc: board: ti: am62x: Convert the image format to svg
Convert the image format into svg that can be reused across platforms as
needed.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
654dceddcf doc: board: ti: am65x: Convert the image format to svg
Convert the image format into svg that can be reused across platforms as
needed.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
3b83dff183 doc: board: ti: j721e: Convert the image format to svg
Convert the image format into svg that can be reused across platforms as
needed.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
f4ade09a1e doc: board: ti: j7200: Convert the image format to svg
Convert the image format into svg that can be reused across platforms as
needed.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
c727b81d65 doc: board: ti: k3: Reuse build instructions
Introduce common variables to define a generic build instruction that is
then used in specific board specific description.

Labels are introduced in the evm.rst files to be then reused in variant
board documentation as well.

While at this, drop using ARCH=arm when building u-boot sources. This
practice has been discouraged for some time and can potentially create
problems with Kconfig rules related to aarch64. It's best to avoid
this approach.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
9e30ebc983 doc: board: ti: j721e: Update with boot flow diagram
Update the bootflow svg diagram instead of the ascii version

Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
fd358121bd doc: board: ti: am65x: Update with boot flow diagram
Update the bootflow svg diagram instead of the ascii version

Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
68b3baaf3b doc: board: ti: am62x/j7200: Update with common boot flow diagram
Update the bootflow svg diagram and reuse across the platforms as they
are common.

Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Nishanth Menon
cce3e7a23d doc: board: ti: Optimize sources references
We have duplication of sources which makes it hard to sustain across the
board, but at the same time, we'd like to ensure readers get specific
information without having to cross refer to different documentation to
get piecemeal information that they need to put together.

Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 11:36:37 +02:00
Dan Carpenter
a7eb8aeccb efi_loader: fix uninitialized variable bug in efi_set_load_options()
Check for efi_search_protocol() failure before dereferencing "handler"
to avoid a crash.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
2023-07-28 11:36:37 +02:00
Tom Rini
f687c8f7b4 doc: ti: Clarify required file names for K3 platforms
Now that we are using binman in all cases on these platforms, reword
things to be clearer that for filesystem booting we need to use a
specific name for each component.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
2023-07-28 11:36:37 +02:00
Ilias Apalodimas
54edc37a22 efi_loader: make efi_delete_handle() follow the EFI spec
The EFI doesn't allow removal of handles, unless all hosted protocols
are cleanly removed.  Our efi_delete_handle() is a bit intrusive.
Although it does try to delete protocols before removing a handle,
it doesn't care if that fails.  Instead it only returns an error if the
handle is invalid. On top of that none of the callers of that function
check the return code.

So let's rewrite this in a way that fits the EFI spec better.  Instead
of forcing the handle removal, gracefully uninstall all the handle
protocols.  According to the EFI spec when the last protocol is removed
the handle will be deleted.  Also switch all the callers and check the
return code. Some callers can't do anything useful apart from reporting
an error.  The disk related functions on the other hand, can prevent a
medium that is being used by EFI from removal.

The only function that doesn't check the result is efi_delete_image().
But that function needs a bigger rework anyway, so we can clean it up in
the future

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-07-28 11:36:37 +02:00
Heinrich Schuchardt
8505c0bb5c doc: describe QEMU emulation of block devices
* Add a new page about the emulation of block devices
* Add semihosting to the emulation index page
* Set toc maxdepth to 1 to improve readability

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-28 11:36:37 +02:00
Heinrich Schuchardt
95537bd31c doc: fix typo device_compat/.h
%s/device_compat\/.h/device_compat.h/

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-28 11:36:37 +02:00
Heinrich Schuchardt
d0544244b1 efi_loader: simplify dp_fill()
Move the recursive dp_fill(dev->parent) call to a single location.
Determine uclass_id only once.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-28 11:36:37 +02:00
Heinrich Schuchardt
c227ef7c4a efi_loader: device paths for special block devices
The UEFI specification does not provide node types matching UCLASS_BLKMAP,
UCLASS_HOST, UCLASS_VIRTIO block devices.

The current implementation uses VenHw() nodes with uclass specific GUIDs
and a single byte for the device number appended. This leads to unaligned
integers in succeeding device path nodes.

The current implementation fails to create unique device paths for block
devices based on other uclasses like UCLASS_PVBLOCK.

Let's use a VenHw() node with the U-Boot GUID with a length dividable by
four and encoding blkdesc->uclass_id as well as  blkdesc->devnum.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-07-28 11:36:37 +02:00
Heinrich Schuchardt
771d7cd8c5 doc: update doc/sphinx/requirements.txt
Update the following requirements to their latest version:

* Pygments - syntax highlighting
* pytz     - world timezone definitions
* certifi  - Mozilla's CA bundle

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-07-28 11:36:37 +02:00
Roger Quadros
7c9267e511 net: ti: am65-cpsw-nuss: Get port mode register from standard "phys" property
Approved DT binding has the port mode register in the
"phys" property. Get it from there instead of the custom
"cpsw-phy-sel" property.

This will allow us to keep DT in sync with Linux.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
2023-07-27 17:10:46 -04:00
Roger Quadros
fcb513e5f2 net: ti: am65-cpsw-nuss: Use approved property to get efuse address
The approved DT property for MAC efuse (ROM) address is
"ti,syscon-efuse".

Use that and drop custom property "mac_efuse".

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
2023-07-27 17:10:46 -04:00
Maxime Ripard
9b33be392b net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
The binding represents the MDIO controller as a child device tree
node of the MAC device tree node.

The U-Boot driver mostly ignores that child device tree node and just
hardcodes the resources it uses to support both the MAC and MDIO in a
single driver.

However, some resources like pinctrl muxing states are thus ignored.
This has been a problem with some device trees that will put some
pinctrl states on the MDIO device tree node, like the SK-AM62 Device
Tree does.

Let's rework the driver a bit to create a dummy MDIO driver that we will
then get during our initialization to force the core to select the right
muxing.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
2023-07-27 17:10:46 -04:00
Tom Rini
67957176a2 Merge branch '2023-07-27-assorted-network-updates'
- Merge a few network updates
2023-07-27 16:45:50 -04:00
Nate Drude
e8b4a8d7f0 phy: adin: add readext and writeext support for mdio cmd
The adin phy has extended registers that can be accessed using
adin_ext_read and adin_ext_write. These registers can be read directly
using the mdio command using readext and writext. For example:

     => mdio rx ethernet@428a0000 0xff23
     Reading from bus ethernet@428a0000
     PHY at address 0:
     65315 - 0xe01

Signed-off-by: Nate Drude <nate.d@variscite.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-07-27 14:32:12 -04:00
Karsten Wiese
3ca4955760 net: ksz9477: add support for KSZ9893 GbE switch
Copy and tweak the required code from the linux kernel.
Only the KSZ9893 has been tested.

Signed-off-by: Karsten Wiese <karsten.wiese@protechna.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-07-27 14:32:12 -04:00
Ehsan Mohandesi
1196e5241d net: ipv6: network protocol structures should be packed
The structure icmp6_ra_prefix_info needs to be packed because it is read
from a network stream.

Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com>
Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-07-27 13:39:07 -04:00
Ehsan Mohandesi
a29df56eab net: ipv6: router advertisement message length should be within limits
The argument len passed to function process_ra is the length of the IPv6
router advertisement message and needs to be between 0 and MTU because
it is assigned to remaining_option_len and used as a loop variable.

Addresses-Coverity-ID: 450971 ("TAINTED_SCALAR")
Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com>
Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-07-27 13:39:07 -04:00
Tom Rini
c98c401dfb Merge https://source.denx.de/u-boot/custodians/u-boot-usb 2023-07-27 10:35:36 -04:00
Richard Habeeb
3aba92c9dd usb: xhci: Fix double free on failure
drivers/core/device.c will call `device_free()` after xhci_register
already frees the private device data. This can cause a crash later
during the boot process, observed on aarch64 RPi4b as a synchronous
exception. All callers of xhci_register use priv_auto, so this won't
lead to memory leaks.

Signed-off-by: Richard Habeeb <richard.habeeb@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-27 03:59:38 +02:00
Tom Rini
197aa22e65 Merge branch 'master' of git://git.denx.de/u-boot-coldfire
- Watchdog updates, and more MAINTAINERS entries
2023-07-25 17:37:39 -04:00