Commit graph

18657 commits

Author SHA1 Message Date
Simon Glass
c3dc39a2f8 arm: Don't include common.h in header files
It is bad practice to include common.h in other header files since it can
bring in any number of superfluous definitions. It implies that some C
files don't include it and thus may be missing CONFIG options that are set
up by that file. The C files should include these themselves.

Update some header files in arch/arm to drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:54:24 -04:00
Simon Glass
b79fdc7697 common: Drop flash.h from common header
Move this uncommon header out of the common header.

Fix up some style problems in flash.h while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:53:28 -04:00
Simon Glass
a595a0e910 flash: Tidy up coding style for flash functions
Some functions use the wrong code style and generate checkpatch errors.
Fix these.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:53:28 -04:00
Tiaki Rice
d32cbefc8a ARM: dts: sama5d2: Add uart4 definition
This patch adds support for uart4 to the
processor level device tree include file.

Signed-off-by: Tiaki Rice <tiakirice@hotmail.com>
Cc: Eugen Hristev <Eugen.Hristev@microchip.com>
2020-05-18 15:00:20 +03:00
Ilias Apalodimas
7f44c7e281 dts: nxp2160ardb: add op-tee node
A defconfig is added on lx2160ardb which allows UEFI variable management
via OP-TEE. Enable the the node in the relevant DTS file.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-05-17 21:59:53 +02:00
Michael Walle
714497e327 efi_loader: round the memory area in efi_add_memory_map()
Virtually all callers of this function do the rounding on their own.
Some do it right, some don't. Instead of doing this in each caller,
do the rounding in efi_add_memory_map(). Change the size parameter
to bytes instead of pages and remove aligning and size calculation in
all callers.

There is no more need to make the original efi_add_memory_map() (which
takes pages as size) available outside the module. Thus rename it to
efi_add_memory_map_pg() and make it static to prevent further misuse
outside the module.

Signed-off-by: Michael Walle <michael@walle.cc>
Add missing comma in sunxi_display.c.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17 21:59:53 +02:00
Samuel Holland
3988be5fd4 spl: Always define preloader_console_init
A large number of boards call preloader_console_init unconditionally.
Currently, they fail to build with CONFIG_SPL_SERIAL=n, because the
function is undefined in that case. To fix the build, always define
preloader_console_init, but make it no-op when CONFIG_SPL_SERIAL=n.

For the few boards that did check for CONFIG_SPL_SERIAL before calling
preloader_console_init, remove the checks, since the function can now
be called unconditionally.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
71f6354b0e rename symbol: CONFIG_STM32 -> CONFIG_ARCH_STM32
Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
18138ab203 rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
bb0fb4c0f4 rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
Have this symbol follow the pattern of all other such symbols.
This patch also removes a TODO from the code.

Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
b48f72a86b arm: orion5x: finish moving SoC to mach-orion5x
The SPL linker script had been left in arch/$(ARCH)/cpu/$(CPU)/$(SOC);
therefore move it to the already-established arch/$(ARCH)/mach-$(SOC)
location.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
b16a331697 rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
Have this symbol follow the pattern of all other such symbols.
This patch removes a TODO from the code.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
9bffc54996 arch/arm/Makefile: sort machine names
The comment immediately above the block of machine directory names implored
users to keep the macro names sorted, but, alas, this is no longer the case.

Put the list of machine directory names back in alphanumerical order by
CONFIG_* macro name, as the comment asks. Sort all the symbols as though they
all followed the convention of having the string "ARCH_" in the middle of
their definitions.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
b3d9a8b185 arm: lpc32xx: move SoC to mach-lpc32xx
Following the example of most other SoCs in arch/$(ARCH)/cpu/$(CPU)/$(SOC)
move the lpc32xx code from arch/arm/cpu/arm926ejs/lpc32xx to
arch/arm/mach-lpc32xx.

Following the checklist from
commit 01f1445630 ("ARM: prepare for moving SoC sources into mach-*"):

    [1] move files from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpx32xx
    [2] add machine entry to arch/arm/Makefile
    [3] remove "obj-y += ..." from arch/arm/cpu/arm926ejs/Makefile
    [4] fix the Kconfig file path in arch/arm/Kconfig
    [5] (no MAINTAINERS update)

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Tom Rini
e2b86e23ce - stm32mp1: migrate MTD and DFU configuration in Kconfig
- stm32mp1: add command stm32prog
 - stm32mp1: several board and arch updates
 - stm32mp1: activate data cache in SPL and before relocation
 - Many improvment for AV96 board and DHCOR SoM
   (add new defconfig, DDR3 coding on DHCOR SoM, split between board and SOM
    Synchronize DDR setttings on DH SoMs, setting for I2C EEPROM)
 - clk: stm32mp1: fix CK_MPU calculation
 - DT alignment of stm32mp1 device tree with Linux 5.7-rc2
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl69FWMACgkQ4rK92eCq
 k3Vy9wgAmFLZ+u2C87A9Cs8i73QX/hs9TsjTJJPxsQWy3bOILgw8ZqBtzqD0qPvc
 Mpqq7UEIZ17OW/lZCi3hqC0nGj7bT3N9rDpUQfu5Voq3GoO80yZqvCQU04AXGGpW
 Aj0fjI5a6JRxQfR7XVoNw7UXPDUrDlchvBDR1GMK4cj4Sw/B+pXNDjkoJ1UWbxG6
 INDgQQKhOCdMzbIsMLiUe4zkT6E8ADI0eJzgti3kWBzrdkwXZg40iEJu/MbMPRKE
 Y22QZ6EkEMFTVYeCPXLU8keo4UbBIKDXWmVDbDeDbNa0QrKZ2IZ0TijajWeMWxZV
 Q9J7JgpSchWcVB14vYNx+HXPUHANTA==
 =bhlu
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200514' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- stm32mp1: migrate MTD and DFU configuration in Kconfig
- stm32mp1: add command stm32prog
- stm32mp1: several board and arch updates
- stm32mp1: activate data cache in SPL and before relocation
- Many improvment for AV96 board and DHCOR SoM
  (add new defconfig, DDR3 coding on DHCOR SoM, split between board and SOM
   Synchronize DDR setttings on DH SoMs, setting for I2C EEPROM)
- clk: stm32mp1: fix CK_MPU calculation
- DT alignment of stm32mp1 device tree with Linux 5.7-rc2
2020-05-14 08:44:06 -04:00
Tom Rini
fe16786149 - fix phy configuration for RPi4's bcmgenet
- sync RPi4's env size with other RPi configs
 - add kconfig option to reserver more pages in the EFI mem map
 - add support for SDMA which is used by RPi4
 - fix corner case boot bug for RPi3 32-bit
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl69A9oSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+/vYP/1UaHpYRyjW4AbiKeQHUA/orMx7CxNH2
 wMLl59iIA7Ef5m2lON2RpJxFhEWTeBRD6gRenKZnGp7wESEeDlCmocXRuOSWVBHG
 hjo52f9QXIm1WTlS21aZh6fVuBHNHbn89pBhBRcBI3uaZADkWnM3p3ZB3WCoYAqw
 SRE4T5FtDGBXF0vpyRJq90B6cgK74XifowXlVxsJolI0PYjm3mQunnh1Z3jAPn1i
 IVdFW4453o38N4sx8nsLVJYhYDvFOlxJx66zJN3Ac6fqAPN/6XPaO46+A0a64Rpw
 Bs8a90fLhkUze4Mmk2ZlEBgXvQG5Zlu8cqxxapFNINxO7eEFC6YHAEllRz8lNx1N
 KwfXMwU0HAoDhxQJ7z86iA0rGN7yHkeZps/dCpbqER+7GdZFmr2Rwmdk0L9B6cP1
 LJ5nbtgZcsTdflyBcMTds3rdPEwHXHSZUcGEBuwDnD56V0jOvmmDiIXU+4IRD9lZ
 HhNQqdj6lSJgCqBkdkC+1AQHfEWxvTfJHaQwJ7r8sOP50Uch8IEYTNNgaGoBlhvq
 icBoH1CAakkboBtjLmgmU157JjPRiYfjHXIeZQigtb8gWJ7xJnGbTDGfcdwPrYod
 HMHQ5KXPhFDiAPpfE2By8embM3J/ogWS8SV5l2bxHb5ZDI31aoT66elF2s4gMDS7
 d92/1HzkKEKl
 =66oV
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi

- fix phy configuration for RPi4's bcmgenet
- sync RPi4's env size with other RPi configs
- add kconfig option to reserver more pages in the EFI mem map
- add support for SDMA which is used by RPi4
- fix corner case boot bug for RPi3 32-bit
2020-05-14 08:43:33 -04:00
Patrick Delaunay
1b28a5e2b0 ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2
DT alignment with Linux 5.7-rc2, including the kernel commits

431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards
79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards
877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards
7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards
f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1
d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x
b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c
1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1
bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1
b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx
a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards
8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1
fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board
cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151
c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1
9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15
82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151
8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node
a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1
4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1
80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1
ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
dc7e5f190d arm: stm32mp: activate data cache on DDR in SPL
Activate cache on DDR to improve the accesses to DDR used by SPL:
- CONFIG_SPL_BSS_START_ADDR
- CONFIG_SYS_SPL_MALLOC_START

Cache is configured only when DDR is fully initialized,
to avoid speculative access and issue in get_ram_size().
Data cache is deactivated at the end of SPL, to flush the data cache
and the TLB.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
7e8471cae5 arm: stm32mp: activate data cache in SPL and before relocation
Activate the data cache in SPL and in U-Boot before relocation.

In arch_cpu_init(), the function early_enable_caches() sets the early
TLB, early_tlb[] located .init section, and set cacheable:
- for SPL, all the SYSRAM
- for U-Boot, all the DDR

After relocation, the function enable_caches() (called by board_r)
reconfigures the MMU with new TLB location (reserved in
board_f.c::reserve_mmu) and re-enable the data cache.

This patch allows to reduce the execution time, particularly
- for the device tree parsing in U-Boot pre-reloc stage
  (dm_extended_scan_fd =>dm_scan_fdt)
- in I2C timing computation in SPL (stm32_i2c_choose_solution())

For example, the result on STM32MP157C-DK2 board is:
   1,6s gain for trusted boot chain with TF-A
   2,2s gain for basic boot chain with SPL

For information, as TLB is added in .data section, the binary size
increased and the SPL load time by ROM code increased (30ms on DK2).

But early malloc can't be used for TLB because arch_cpu_init()
is executed before the early poll initialization done in spl_common_init()
called by spl_early_init() So it too late for this use case.
And if I initialize the MMU and the cache after this function it is
too late, as dm_init_and_scan and fdt parsing is also called in
spl_common_init().

And .BSS can be used in board_init_f(): only stack and global can use
before BSS init done in board_init_r().

So .data is the better solution without hardcoded location but if you
have size issue for SPL you can deactivate cache for SPL only
(with CONFIG_SPL_SYS_DCACHE_OFF).

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
1e444bdc98 ARM: stm32: Hog GPIO PF7 high on DHCOM to unlock SPI NOR nWP
The SPI NOR nWP line is connected to GPIO PF7 on the SoM,
pull the GPIO line high by default to clear SPI NOR WP.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
92ca0f7446 ARM: dts: stm32: Synchronize DDR setttings on DH SoMs
Add custom DDR DRAM settings for the DHCOR and DHCOM SoMs and put them
into use by the board file instead of the default ones. These new DRAM
settings are a better fit for the SoMs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
1ca5017418 ARM: dts: stm32: Fix AV96 and DHCOR split
The commit 132e5b6898 ("ARM: dts: stm32: Split AV96 into DHCOR SoM
and AV96 board") was not applied correctly and in full, and omitted
an important split of the SoM into 3V3 and 1V8 options. The Avenger96
board is based on the 1V8 IO option of the DHCOR SoM, however this is
an optional modification of the 3V3 IO DHCOR SoM with extra on-SoM
regulator to cater for the 96boards 1V8 IO requirements.

Reinstate the split between the 1V8 and 3V3 IO variants.

Fixes: 132e5b6898 ("ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
414315bcdf ARM: dts: stm32mp15: use DDR3 files generated by STM32CubeMX
Use the DDR3 dtsi files generated by STM32CubeMX 5.6.0
Speed Bin Grade = using DDR3-1066G / 8-8-8 and all others
parameters at default value.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
0c95295e17 board: stm32mp1: update management of boot-led
Force boot-led ON and no more rely on default-state.
This patch avoid device-tree modification for U-Boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
eaec1f9e90 arm: stm32mp: spl: update error management in board_init_f
Call hang when an error is detected for probe of any driver
needed for console or DDR init: clk, reset and pincontrol

NB: previous behavior with a return in board_init_f() was not correct;
    DDR is not initialized and SPL execution can't continue

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
586117ce80 arm: stm32mp: remove dependency for STM32KEY
This command is not more depending on fuse command, but have
direct access to BSEC misc driver, so the dependency with
can be removed CMD_FUSE

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
306a5cf24f stm32mp: stm32prog: add support of RAM target
Add support of RAM target in flashlayout to load kernel image
("system") and device tree ("filesystem") in DDR with DFU and
start these images.

The flashlayout.tsv is:

-	0x01	fsbl		Binary		none	0x00000000	tf-a.stm32
-	0x03	ssbl		Binary		none	0x00000000	u-boot.stm32
P	0x10	kernel		System		ram0	0xC2000000	uImage.bin
P	0x11	dtb		FileSystem	ram0	0xC4000000	dtb.bin

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
d0686c69ff stm32mp: stm32prog: support for script
Support an U-Boot script included in uimage instead of flashlayout file
(text file in tsv format).

This feature is used to execute this script directly when U-Boot is
loaded in DDR (for update without STM32CubeProgrammer for example).

A simple example with dfu-util only is:

$> echo "dfu 0" > script.cmd
$> mkimage -C none -A arm -T script -d script.cmd script.uimg
$> mkimage -T stm32image -a 0xC0000000 -e 0xC0000000 -d script.uimg \
  script.stm32

$> dfu-util -d 0483:df11 -a 1 -D tf-a.stm32
$> dfu-util -d 0483:df11 -a 0 -D script.stm32
$> dfu-util -d 0483:df11 -a 0 -D u-boot.stm32
$> dfu-util -d 0483:df11 -a 0 -e

Then you can used dfu-utils to update your device

To increase speed, you can also switch to fastboot protocol with:
  echo "fastboot 0" > script.cmd

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
99d643cb41 stm32mp: stm32prog: enable videoconsole
Enable the videoconsole during the stm32prog command execution
to have information without UART.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
468f0508b5 stm32mp: stm32prog: add serial link support
Add a support of UART, using the same protocol than MCU STM32.

See "AN5275: USB DFU/USART protocols used in STM32MP1 Series
bootloaders" for details.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
6ce1f4ad8d stm32mp: stm32prog: add pmic NVM update support
Add a virtual partition to update the pmic non volatile memory.
(on ST board, STPMIC1).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
936f1aea80 stm32mp: stm32prog: add otp update support
Add a virtual partition to update the STM32MP15x OTP based
on SMC service provided by TF-A.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
2bad5d082d stm32mp: stm32prog: add support for delete option in flashlayout
Add support for delete option 'D' in flashlayout for
full device or for partitions

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
b83caf9fcb stm32mp: stm32prog: add support of ssbl copy
For reliability of boot from NAND/SPI-NAND (with read-disturb issue)
the SSBL can be present several time, when it is indicated in the
flashlayout with "Binary(X)".
The received binary is copied X times by U-Boot on the target.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
8f035f7b48 stm32mp: stm32prog: adapt the MTD partitions
Dynamically adapt the MTD partitions in NOR/NAND/SPI-NAND when stm32prog
command detects in the parsed flash layout files:
- a fsbl partition in NOR.
- a tee partition in NOR/NAND/SPI-NAND

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
eb845d6f8b stm32mp: stm32prog: add MTD devices support
Add support of MTD device (DFU_MTD backend) for
NOR, NAND or SPI-NAND target.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
ffc405e63b stm32mp: stm32prog: add upport of partial update
Add support of partial update, update only some partitions,
and check the coherence of the layout with the existing GPT
partitions (offset and size).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
878f7542f1 stm32mp: stm32prog: add support of boot partition for eMMC device
Add support of eMMC device boot partition with
part_id = -1 for offset="boot1"
     or = -2 for offset="boot2"

The stm32prog command configures the MMC DFU backend with "mmcpart"
and configure the eMMC (command "mmc bootbus" and "mmc partconf")
when the update is done.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
aff4c5dd82 stm32mp: stm32prog: add MMC device
Add support of MMC device (based on DFU_MMC backend)
for SD card and eMMC update.

Create a GPT partitioning on the device.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
6ee6839183 stm32mp: stm32prog: add flash layout parsing
Build the list of device and of partition with
a tab separated value file with a stm32 header: the FlashLayout.tsv
(https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
954bd1a923 stm32mp: add the command stm32prog
Add a specific command stm32prog for STM32MP soc family
witch allows to program the boot devices with the tool
STM32CubeProgrammer (http://www.st.com/STM32CubeProg).

This command uses the same UART STM32 protocol than MCU
STM32 with or USB with DFU protocol v1.1 (ithe MCU ST
extension are no supported).

The executed actions are based on a tab separated value file
with a stm32 header, the FlashLayout file
(https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout).

This file is parsed by the U-Boot command to:
- initialize the devices
- create the partition table on each device
- initialize the DFU backend to access to not volatile memory
  (NOR/NAND/SD/eMMC) or to virtual device (OTP/PMIC)

Up to STM32PROG_MAX_DEV (5) devices can be updated with a FlashLayout.

The communication between U-Boot and STM32CubeProgrammer is done with
the specific alternate configuration (see "AN5275: USB DFU/USART protocols
used in STM32MP1 Series bootloaders" for details).

The command stm32prog is executed when a boot from USB is detected
(selected with bootpins) and we can program the boot devices with
a simple command (on Windows or Linux):

PC $>  STM32_Programmer_CLI -c port=usb1 -w flaslayout.tsv

1/ the ROM code loads TF-A in embedded RAM (DFU or uart)
2/ TF-A loads flashlayout file and U-Boot in DDR (DFU or uart)
3/ U-Boot executes the stm32prog command (DFU or uart)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
7802a4495f stm32mp: add function get_cpu_dev
Add a function get_cpu_dev to get the DEV_ID present
in DBGMCU_IDC register.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
b664a74537 board: stm32mp1: support boot from spi-nand
Manage BOOT_FLASH_SPINAND, with boot_device="spi-nand"
and treat this value in bootcmd_stm32mp.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
4ac345220a board: stm32mp1: use FDT address provided by TF-A at boot time
Save and use the FDT address provided by TF-A in r2 at boot time
(it is NT_FW_CONFIG = Non Trusted Firmware configuration file)

Address is saved in save_boot_params(), called by start.S
and the used DTB is gd->fdt_blob = board_fdt_blob_setup().

If dtb is not provided or invalid, U-Boot use as fallback
the builtin DTB.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
43df0a159d stm32mp1: dynamically detect op-tee presence
Activate OP-TEE driver for trusted and optee defconfig.

This driver allows detection of TEE presence for boot from flash;
CONFIG_STM32MP1_OPTEE is also removed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
4a1b975dac board: stm32mp1: reserve memory for OP-TEE in device tree
Add reserve memory for OP-TEE in U-Boot and in kernel device tree:
- no more reduce the DDR size in "memory" node:
  CONFIG_SYS_MEM_TOP_HIDE is no more used
- U-Boot device-tree defines the needed "reserved-memory" for OP-TEE
  and U-Boot should not use this reserved memory: board_get_usable_ram_top
  use lmb lib to found the first free region, the not reserved
  memory, enough to relocate U-Boot: the needed size of U-Boot
  is estimated with gd->mon_len + CONFIG_SYS_MALLOC_LEN.
- the optee node ("optee@...": firmware with compatible "linaro,optee-tz")
  and the associated "reserved-memory" are deactivated in kernel device
  tree when OP-TEE is not detected by U-Boot to prevent kernel issue
  (memory is reserved but not used, optee driver probe failed).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
2d68365da1 ARM: stm32: Implement DDR3 coding on DHCOR SoM
The DHCOR board does exist in multiple variants with different DDR3
DRAM sizes. To cater for all of them, implement DDR3 code handling.
There are two GPIOs which code the DRAM size populated on the SoM,
read them out and use the value to pick the correct DDR3 config.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
a8c97f4a00 ARM: dts: stm32: Rework DDR DT inclusion
Adjust the DDR configuration dtsi such that they only generate the
DRAM configuration node, the DDR controller node is moved into the
stm32mp157-u-boot.dtsi itself. This permits including multiple DDR
configuration dtsi files in board DT.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
731fd50e27 ARM: stm32: Implement board coding on AV96
The AV96 board does exist in multiple variants. To cater for all of
them, implement board code handling. There are two GPIOs which code
the type of the board, read them out and use the value to pick the
correct device tree from an fitImage.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Change-Id: Iddb330b9a66500495885457cbe17edc0eacaaf43
2020-05-14 09:02:12 +02:00
Marek Vasut
65e38e81ac ARM: stm32: Add board_early_init_f() to SPL
Add weak implementation of board_early_init_f() hook into the
STM32MP1 SPL. This can be used to read out e.g. configuration
straps before initializing the DRAM.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Eugeniy Paltsev
bed6481940 ARC: HSDK: add reset for EHCI
Add reset phandle to EHCI device tree node to make on-chip reset
controller usable with EHCI.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13 18:18:09 +03:00
Eugeniy Paltsev
d82ed6788e ARC: DTS: cleanup USB node names
Remove redundant '0x' from node names.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13 18:15:12 +03:00
Kyle Evans
c6badda85c rpi: Kconfig option for initial page reservation
While the nearly-universal default for the Raspberry Pi family is to use
spin tables and the spin table implementation provided by the Raspberry Pi
Foundation, FreeBSD and others may use a PSCI implementation instead.

Accommodate these setups by allowing them to configure for more than one
page to be reserved in the initial reservation.  The default reservation
remains as one page.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13 14:04:49 +02:00
Tom Rini
1e6d9f515d - Enable USB Host for Odroid-C2 board
- Add Open-Drain/Open-Source emulation in GPIO uclass
 -----BEGIN PGP SIGNATURE-----
 
 iQIyBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl65b6wACgkQd9zb2sjI
 SdFUiw/3ZDN1HuH7yHgosL4NvfT7o1QojrV9N2+9I0LHej77JUJZgo0o4b3Igkly
 H6RU9niSqfIItjZWd438IJ0srgeSgP33uEJJNaCJaOFIGEdLIBchJ5Q0ExOKMtX+
 wJVT8U9xHE4TkOHPq88K8OebPHhEjfPLNMkR6TjMmNpCEmdTEQlywmcYILRPemKE
 3WHKzYjW31Chx0fJZJ5EmoHfaL8ckU8Jfv/48mraF+lztdfY4vIiHAn62VoyboBW
 ePXTeh+DjvCZDBrxFjiDXtdhJPV8dHFNQrlOmB2zLC2D6JrbsHnV8zOIPdTsQOf5
 zr132ZTJpEPZSdfWn84EeZfxyEPc/rMkB9JzJ6D8OV/X+tqu6xq6NEU0QdYEaKM/
 o6QdAMYb6JkwyJ1UaN6fDVYpspcwO79Eeuhh4lhBq1BMJGIaiN6odFo4XL+zKTWz
 p8fH1ZgAGomHb17MzLp/WC0iWxwlYjzwfYkXjsPHL4CJID2XaZSgCVbYhEynTATZ
 +BZvrddsEh98BejlAESx7tqmBVwsn0y1xmVhXcn82JPkmfPJ+l+R1pFhkhNwyKFv
 rM1g26BBM2viHCHs+Hn3oh3IVbISM+VGk3M+kDgJB4ThD2g1ak1fyD/gU4RvR3CU
 2mQXURuq/6NuMYjz3j8m7GGBAc5FH8p/4l9VvtcKa5HHhstQMA==
 =l5bh
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200511' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Enable USB Host for Odroid-C2 board
- Add Open-Drain/Open-Source emulation in GPIO uclass
2020-05-12 09:23:15 -04:00
Simon Glass
6cbb41432d arm: dts: bcm283x: Allow UARTs to work before relocation
At present the pinctrl nodes are not enabled in pre-relocation U-Boot so
the UARTs do not correctly select the pinconfig to enable the UART pins.
Fix this so that the U-Boot banner is printed.

This fixes serial output on rpi_3b_32b with the following config.txt
options:

   enable_uart=1
   gpu_freq=250

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 9821636b64 (bcm2835_pinctrl: Probe pre-reloc)
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12 10:59:12 +02:00
Tom Rini
bb488ac34d Merge tag 'ti-v2020.07-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix boot issues on Nokia RX-51
- Configure AM6 CPSW for 10Mbps in rgmii mode.
- Minor changes for J721e
2020-05-11 12:04:54 -04:00
Tom Rini
1bccb23b7b i.MX for 2020.07
----------------
 
 - i.MX NAND and nandbxb for i.MX8M
 - imx8MM : new beacon devkit
 - imx8MQ : new pico-imx8MQ
 - imx8QXP : extend to enable M4, fixes
 - add thermal support
 - caches in SPL (missing board)
 - Fixes
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/685391011
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXrklRA8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bO5ACdH8huXVOBT5dHlzJYJcHo1YaLh9sAmwezO44z
 oNDJdyyEugycwU3zpqyd
 =e0Zc
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200511' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX for 2020.07
----------------

- i.MX NAND and nandbxb for i.MX8M
- imx8MM : new beacon devkit
- imx8MQ : new pico-imx8MQ
- imx8QXP : extend to enable M4, fixes
- add thermal support
- caches in SPL (missing board)
- Fixes

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/685391011
2020-05-11 09:46:43 -04:00
Neil Armstrong
9bf87e256c test: dm: update test for open-drain/open-source emulation in gpio-uclass
Add tests for testing open-drain/open-source emulation in gpio-uclass.
It also adds two test3-gpios configured as GPIO_ACTIVE_LOW.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-11 15:12:56 +02:00
Beniamino Galvani
375d79cdbb odroid-c2: enable USB host controller
Enable the second USB controller, which is connected to a hub with 4
ports. The first controller is for the OTG port and is currently not
supported.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
[narmstrong: removed useless DWC2_UTMI_WIDTH in meson64.h]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-05-11 10:07:57 +02:00
Andrew F. Davis
b76bea1205 arm: K3: Increase default SYSFW image size allocation
The memory allocated to store the FIT image containing SYSFW and board
configuration data is statically defined to the largest size expected.
Some additions to the board configuration data has pushed us slightly
over the current defined size on some HS devices, expand to 278000.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2020-05-11 10:16:49 +05:30
Jagan Teki
5a2b6778fa phy: Use _nodev naming convention if non-device clients
Clients that are requesting some of uclass API's
without a device (with ofnode) usually have _nodev
naming convention.

- clk_get_by_index_nodev
- clk_get_by_name_nodev
- reset_get_by_index_nodev
- gpio_request_by_name_nodev

So, update the same naming convention PHY framework.

This doesn't change the existing functionality.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-11 01:30:49 +05:30
Peng Fan
d52a03b130 imx8: cpu: check resource owned after sid fail
When we create software partition, we still need let parent
partition to configure sid, so move the check after sid failed.

Acked-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:21 +02:00
Peng Fan
ed5b253d0e imx: imx8qm/qxp: check whether m4 partition booted
Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
42b26ddc80 imx8: Select boot device dynamically
For fspi build, we will enable both SPL NOR support and SPL SPI
support. SPL will dynamically check the resource owner then
select corresponding boot device.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
6aead23323 imx: imx8qm/qxp: Recover SPL data section for partition reboot
When doing partition reboot, the boot image won't be reloaded by ROM,
it is just CPU reset to boot entry. The SW has to keep the boot image
inside the RAM unchanged. It includes both the TEXT section and DATA
section.

For SPL, the problem is DATA section will be updated at runtime, so in
next partition reboot the data is not same as the initial value from
cold boot. If any code depends on the initial value, then it will have
problem.

This patch introduces a mechanism to recover the data section
for partition reboot. It adds a new section in image for saving
data section. When from cold boot, the data section will be saved
to that new section at SPL early phase. When from partition reboot,
the data section will be restored from the new section.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
231401de2e imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot
Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
8103767256 imx: imx8qm/qxp: add get_board_serial
Add get_board_serial support, the info could be got from fuse.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
7c351ff5e0 imx: imx8qm/qxp: Fix issue in get_effective_memsize
When Trusty OS allocates the mem region from 0xfe0000000-0xffffffff,
the get_effective_memsize does not return correct memory size.
There is a check in get_effective_memsize to find the memreg where
the u-boot is running, and return the size of that memreg as the result
of get_effective_memsize. When using aligned start, the value is
0x80200000 since it is 2MB aligned. Thus the finding of memreg will
fail and return the PHYS_SDRAM_1_SIZE because u-boot text base is
0x80020000. This cause u-boot is relocated to the high memory where has
been occupied by Trusty OS.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
f44afd546f imx: imx8qm/qxp: reserving DDR memory for M4
The DDR memory from 0x88000000 to 0x8FFFFFFF is assigned to M4 on
QM and QXP. The M4 can allocate this memory by two ways,
in SCD or u-boot.

In this patch, u-boot addes the memory reserve node to DTB to pass
the info to kernel, no matter the M4 memory is reserved in SCD
or u-boot. So kernel won't access M4 reserved memory.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Han Xu
f797fe84fc nandbcb: read boot search count from fuse for imx8qxp
add support for imx8qxp to read boot search count from fuse in nandbcb

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Han Xu
214b7d534d cmd: nandbcb: Reconstruct the nandbcb tool for all platforms
The original nandbcb tool was designed for imx6 only, when trying to
leverage it to replace the kobs-ng tool, we found the design is not
friendly for supporting all platforms. To support all iMX6/7/8 platforms
and for easy further maintain, I reconstruct the structure of the tool.

The main changes including:

1. Use platform_data to determine the logic branches rather than simply
   use SOC name.
2. More data structures as parameter for functions.
3. Global variables to define the FCB/DBBT/FW locations.
4. Implement the kobs-ng default 4 FCB/4 DBBT/2 FW layout.
5. Support Hamming coding/ 40bit BCH/ 62bit BCH coding FCB.
6. Dump and compare all written FCB/DBBT to verify data integrity.

The tool has been verified on iMX6Q/DL, 6SX, 7D, 6ULL, iMX8QX, iMX8MM.

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Alice Guo
49f8454705 nandbcb: add nandbcb dump command for i.MX6
Verify/dump boot structures.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Alice Guo
0b10337b21 nandbcb: add nandbcb dump command for i.MX8MM
Verify/dump boot structures written to NAND Flash chip.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Alice Guo
66dbd9c9ed nandbcb: support i.MX8M
Tested on i.MX8MM EVK, imx8mm evk uses BCH
encoding and randomizer
modify macro and print size_t with %zx
use CONFIG_IMX8M because it should apply to imx8mq/mm/mn

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Han Xu
c6ed3508bd nandbcb: fix the issue cannot support gf_14 NAND boot
bchtype in FCB should be associated to the gf_13/14 settings in BCH, fix
the issue and test on Micron 29F64G08CBABB, it can boot after the
change.

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Leonard Crestez
6fcb2ee783 imx8: Replace SC_R_LAST with SC_R_NONE in DTB
We are currently using SC_R_LAST as a marker for imx8 power domain tree
nodes without a resource attached. This value is compiled into dtb as
part of the linux build and used by uboot.

The SC_R_LAST constant changes frequently as SCFW resources are added
(by design) and every time we need to update linux and uboot headers
together or boot can fail.

Fix this by replacing SC_R_LAST usage with a new constant SC_R_NONE
defined to be 0xFFF0.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
8c0a1c6de8 imx8: power: Add PD device lookup interface to power domain uclass
Add power_domain_lookup_name interface to power domain uclass to find
a power domain device by its DTB node name, not using its associated
client device.

Through this interface, we can operate the power domain devices directly.
This is needed for non-DM drivers.

Modified from Ye's NXP downstream patch

only for legacy imx8 power domain driver, since we have not migrated
to use new power domain driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Adam Ford
f36f8bc627 imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit.
Beacon EmbeddedWorks, formerly known as Logic PD, is releasing
a devkit based on the i.MX8M Mini SoC consisting of baseboard +
SOM.

It supports eMMC on the SOM, microSD on the baseboard, various
GPIO, the PINCTRL, and UART.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-10 20:55:20 +02:00
Peng Fan
39320e7256 mtd: nand: support GPMI NAND driver for i.MX8
enable the GPMI NAND driver for i.MX8, i.MX8 use similar controller as
i.MX8M

- register definition for i.mx8
- DMA structure must be 32bit address

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Han Xu
17282f45ab mtd: mxs_nand: fix the gf_13/14 definition issue
gf_13/14 mask was not set correctly in register definition.

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
ff99041b3b mxs_nand: Add support for i.MX8M
Update the gpmi/apbh_dma/bch drivers and relevant registers for i.MX8M.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
29f40c07e7 nand: mxs: correct bitflip for erased NAND page
This patch is a porting of
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/
commit/?h=imx_4.1.15_1.0.0_ga&id=e4dacc44d22e9474ec456cb330df525cd805ea38
"
i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
bitflip number for erased NAND page. So for these two platform, set the
erase threshold to gf/2 and if bitflip detected, GPMI driver will
correct the data to all 0xFF.

Also updated the imx6qp dts file to ditinguish the GPMI module for i.MX6Q
with the one for i.MX6QP.
"

In this patch, i.MX6UL is added and threshold changed to use ecc_strength.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
dc597d1d40 imx: cpu: support tmu
Support tmu when print cpu info

Signed-off-by: peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
ef56281cf3 imx: regs: add more fuse bank structure
Add more fuse bank structure for use.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
3462b55d17 imx8mp: Set default SNSR25C for TMU probe1
So far u-boot only load SNSR25C for TMU main probe (probe 0). However,
kernel enables two probes. So it also needs to set default SNSR25C of
TCALIV1 for blank samples.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
ebb9aab318 imx: load calibration parameters from fuse for i.MX8MP
i.MX8MP thermal which has two probes and supports temperature range
from -40 to 125.  The driver still uses default 1p HW
calibration at 25C and loads calibration parameters from fuse.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
94c693d782 imx: i.MX8MN: Enable loading TASR and TCALIV from fuse
Like iMX8MM, iMX8MN also needs SW to load TMU TASR and TCALIV registers
value from fuse before enabling TMU calibration. Otherwise the calibration
is not exact.

Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
70487ff386 imx8mm: Load fuse for TMU TCALIV and TASR
On iMX8MM, the default value of TMU registers TCALIV and TASR need
be loaded from fuse. HW won't do this, it expect SW loads them before
using TMU.

Reviewed-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
9d4194f179 fec: Move imx_get_mac_from_fuse declare to imx file
imx_get_mac_from_fuse is used to load MAC address from fuse. On imx8mp,
we have two different ENET controllers and both need to call this
function. So decouple its declare from fec driver.

Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
3c42c0f673 imx: add module fuse support
There are different parts from one SoC. Take i.MX6ULL for example,
some part might not have ENET, some might have; some might not have
USB, some might have. The information could be got from OCOTP,
to make one image support the different parts, we need runtime
disable linux kernel dts node and uboot driver probe if the
corresponding module not exists in the part.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:21:13 +02:00
Marek Vasut
b52fb0b0b5 ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ
Add initial support for Technexion Pico-iMX8MQ SoM on PicoPI carrier
board. Currently working is ethernet, serial, eMMC. DT is imported
from Linux 5.4.28 ("462afcd6e7ea") .

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-05-10 13:19:39 +02:00
Stefano Babic
b77d0292ca Merge branch 'master' of git://git.denx.de/u-boot 2020-05-10 13:03:56 +02:00
Patrice Chotard
c2a2123e33 cmd: cache: Fix non-cached memory cachability
If dcache is switched OFF to ON state and if non-cached memory is
used, this non-cached memory must be re-declared as uncached to mmu
each time dcache is set ON.

Introduce noncached_set_region() to set this non-cached region's mmu
settings. Let architecture override it by defining it as a weak
function.

For ARM architecture, noncached_set_region() defines all noncached
region as non-cacheable.

Issue found on STM32MP1 platform using dwc_eth_qos ethernet driver,
when going from dcache OFF to dcache ON state, ethernet driver issued
TX timeout errors when performing dhcp or ping.

It can be reproduced with the following sequence:

dhcp
while true ; do
  ping 192.168.1.300 ;
  dcache off ;
  ping 192.168.1.300 ;
  dcache on ;
done

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-05-07 09:01:42 -04:00
Andre Przywara
56e403d95f arm: juno: enable USB
The Juno board features a standard compliant EHCI/OHCI USB host
controller pair, which we can just enable.
The platform data is taken from the device tree.

This allows to use USB mass storage (the only storage on a Juno r0)
for loading.

At least on my board USB seems a bit flaky, I need two "usb reset"
sequences after the "usb start" to detect an USB hard drive.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07 09:01:42 -04:00
Andre Przywara
be0d09695d arm: juno: Use PSCI based reset
So far the Juno board wasn't implementing reset. Let's just use the
already existing PSCI_RESET based method to avoid any extra code.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07 09:01:42 -04:00
Andre Przywara
b3270e9138 arm: juno: Enable OF_CONTROL
The Arm Juno board was still somewhat stuck in "hardcoded land", even
though there are stable DTs around, and one happens to actually be on
the memory mapped NOR flash.

Enable the configuration options to let the board use OF_CONTROL, and
add a routine to find the address of the DTB partition in NOR
flash, to use that for U-Boot's own purposes.
This can also passed on via $fdtcontroladdr to any kernel or EFI
application, removing the need to actually load a device tree.

Since the existing "afs" command and its flash routines require
flash_init() to be called before being usable, and this is done much
later in the boot process, we introduce a stripped-down partition finder
routine in vexpress64.c, to scan the NOR flash partitions for the
DT partition. This location is then used for U-Boot to find and probe
devices.

The name of the partition can be configured, if needed, but defaults
to "board.dtb", which is used by Linaro's firmware image provided.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07 09:01:42 -04:00
Tom Rini
1259567ae3 Merge git://git.denx.de/u-boot-usb
- MediaTek USB host support
2020-05-05 14:53:51 -04:00
Tom Rini
191ee8aac6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- Add DM model for P1010RDB
- Add I2C DM Model support for P1010RDB, T1042RDB, T2080, T4240RDB,
  MPC8548CDS, T1024RDB, P4080, P3041DS, P2041RDB, P2020RDB, P1020RDB,
  P5040DS
- Fix reference to READM.qe_firmware
2020-05-05 09:08:53 -04:00
Tom Rini
425fefa9a3 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Support 64-bit U-Boot as the payload for coreboot x86
2020-05-04 11:06:14 -04:00
Tom Rini
a1f5f4ac20 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- 2 MVEBU related fixes
2020-05-04 11:05:48 -04:00
Tom Rini
143414c03f i.MX for 2020.07
----------------
 
 - imxrt: fix LCD clock, fix doc
 - new board: Coral Dev
 - imx8: enable Cache in SPL. SNVS, update SCFW API
 - imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading
 - MX6ULL : is_imx6ull to include i.MX6ULZ
 - Net: add config to enable TXC delay
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXq07zQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76azngCdG7iFIXq3kg47qliAr44jIa4s/DUAnRzmSTut
 FuQlRhgXrY+Gh94FzrxN
 =MoOz
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200502' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX for 2020.07
----------------

- imxrt: fix LCD clock, fix doc
- new board: Coral Dev
- imx8: enable Cache in SPL. SNVS, update SCFW API
- imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading
- MX6ULL : is_imx6ull to include i.MX6ULZ
- Net: add config to enable TXC delay

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
2020-05-04 09:29:42 -04:00
Tom Rini
04da42770b Merge tag 'u-boot-rockchip-20200501' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- dts clean up to use -u-boot for px30, rk3399 boards
- dts sycn from upstream kernel for rk3328, rk3399
- add rockchip rng driver
- new board support: rk3328-roc-cc, rk3399-roc-pc,Nanopi M4 2GB
2020-05-04 07:28:14 -04:00
Simon Glass
b4d4f592b2 x86: coreboot: Allow building an SPL image
Make a few adjustments to allow us to build an SPL image for coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04 15:28:28 +08:00
Simon Glass
fc486371c3 x86: Update SPL for coreboot
At present SPL only works on bare-metal builds. With a few tweaks it can
be used for coreboot also.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04 15:28:28 +08:00
Simon Glass
37897c4073 x86: Move work-around out of cpu_jump_to_64bit_uboot()
At present this function copies U-Boot from the last 1MB of ROM. This is
not the right way to do it. Instead, the binman symbol should provide the
location.

But in any case the code should live in the caller,
spl_board_load_image(), so that the 64-bit jump function can be used
elsewhere. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04 15:28:28 +08:00
Simon Glass
c2018cdd71 x86: Allow building an SPL image for coreboot
Coreboot runs in 32-bit mode and cannot run a 64-bit U-Boot. To get around
this we can build a combined image with 32-bit SPL and 64-bit U-Boot. Add
a build rule and binman definition for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04 15:28:28 +08:00
Simon Glass
7ec0e7b635 x86: Move coreboot-table detection to common 32/64-bit code
At present this function is only available in 32-bit code. Move it to the
common cpu file so it can be used by 64-bit U-Boot too.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04 15:28:28 +08:00
Jakov Petrina
f49ac7e1c4 arm: dts: uDPU: switch default PHY speed to 3.125Gbit
This resolves issues with certain SFP modules.

Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-04 07:04:04 +02:00
Biwen Li
9e36eae124 powerpc: dts: p1010: add i2c node
Add i2c node of p1010

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:37 +05:30
Hou Zhiqiang
d2d019b7c3 powerpc: Enable device tree support for P1010RDB
Add device tree for P1010RDB boards and enable CONFIG_OF_CONTROL
so that device tree can be compiled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:37 +05:30
Biwen Li
d2e3f7c608 dm: powerpc: T1040/T1042: add i2c DM support
This supports i2c DM for SoC T1040/T1042

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
8e4be6dfb7 dm: powerpc: T2080/T2081: add i2c DM support
This supports i2c DM for SoC T2080/T2081

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
e6bd72f880 dm: ppc: T4240: add i2c DM support
This supports i2c DM for SoC T4240

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
9e9771a610 dm: powerpc: T1023/T1024: add i2c DM support
This supports i2c DM for SoC T1023/T1024

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
369cb88505 powerpc: dts: P4080: add i2c node
This adds i2c node for SoC P4080

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
0a98d5b02d powerpc: dts: P3041: add i2c node
This adds i2c node for SoC P3041

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
2f3bb4ab3e dm: powerpc: P2041RDB: add i2c DM support
This supports i2c DM for board P2041RDB

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
2563aea1ea dts: powerpc: P2020RDB: add i2c node
This adds i2c node for board P2020RDB

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
74014dfcd8 dm: powerpc: P1020: add i2c DM support
This supports i2c DM for SoC P1020

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
9919e7ea0e dm: powerpc: P5040DS: add i2c DM support
This supports i2c DM for board P5040DS

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
213b19054c powerpc: create dts component of i2c to build up an SoC
Provide a common i2c components that we can utilize to
build up the various device tree.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Frank Li
8142a97d54 cpu: imx8: show RevC instead of Rev? at boot log
Add REVC informaiton.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Chunfeng Yun
ba42c286f6 arm: dts: mt7629: add usb related nodes
Add usb, phy and clock nodes

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
00c82acfe9 test: dm: phy: add a test item for the phy_bulk API
Add a test item for the phy_bulk API

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
bf6ad91629 test: dm: add test item for ofnode_get_child_count()
Add a test item for ofnode_get_child_count()

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Tom Rini
36c2f020f2 actions: Fix syntax for enabling SYS_RELOC_GD_ENV_ADDR
The correct syntax is 'select SYS_...' and not 'select CONFIG_SYS...'

Fixes: d5c819b885 ("actions: Move defconfig options to Kconfig")
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-01 13:30:52 -04:00
Harald Seiler
d81a68957f imx: spl: Fix use of removed SPL_FAT_SUPPORT config
CONFIG_SPL_FAT_SUPPORT was removed in commit 0c3a9ed409
("spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT").
Fixup a leftover use of the symbol.

Fixes: 9d86dbd9cf ("imx: spl: implement spl_boot_mode for i.MX7/8/8M")
Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 18:48:48 +02:00
Harald Seiler
5fc5bac67b imx: spl: Remove ifdefs in spl_mmc_boot_mode()
It is hard to read code which contains nested ifdef blocks.  Replace
them with normal if-blocks and the IS_ENABLED() macro.  This is not only
more readable but also helps as both arms are validated by the compiler
in all cases.

Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 18:48:36 +02:00
Harald Seiler
15aec318ef Revert "imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode"
The CONFIG_SPL_FORCE_MMC_BOOT config flag is not needed as its behavior
is the correct one in all cases;  using spl_boot_device() instead of the
boot_device parameter will lead to inconsistency issues, for example,
when a board_boot_order() is defined.  In fact, this is the reason the
parameter was introduced in the first place, in commit 2b1cdafa9f
("common: Pass the boot device into spl_boot_mode()").

This reverts commit 772b55723b.

Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html
Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 18:47:07 +02:00
Anatolij Gustschin
a15d0aa680 imx: spl: return boot mode for asked MMC device in spl_mmc_boot_mode()
Boards may extend or re-define the boot list in their board_boot_order()
function by modifying spl_boot_list. E.g. a board might boot SPL from a
slow SPI NOR flash and then load the U-Boot from an eMMC or SD-card.
Or it might use additional MMC boot device in spl_boot_list for cases
when the image in SPI NOR flash is not found, so it could fall back to
eMMC, SD-card or another boot device.

Getting the MMC boot mode in spl_mmc will fail when we are trying to
boot from an MMC device in the spl_boot_list and the original board
boot mode (as returned by spl_boot_device()) is not an MMC boot mode.
Fix it by checking the asked MMC boot device from the spl_mmc_boot_mode()
argument.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-05-01 18:46:55 +02:00
Ovidiu Panait
5cf9e3b237 common/board_r: arm: Merge initr_enable_interrupts into interrupts_init
initr_enable_interrupts() is an ARM-specific wrapper over
enable_interrupts(), which is run during the common init sequence. It can
be eliminated by moving the enable_interrupts() call to the end of
interrupt_init() function, in arch/arm/lib/interrupts*.c.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01 11:34:01 -04:00
Patrick Delaunay
54be09cd8f arm: caches: manage phys_addr_t overflow in mmu_set_region_dcache_behaviour
Solved the overflow on phys_addr_t type for start + size in
mmu_set_region_dcache_behaviour() function.

This overflow is avoided by dividing start and end by 2 before addition,
and we only expecting that start and size are even.

This patch doesn't change the current function behavior if the
parameters (start or size) are not aligned on MMU_SECTION_SIZE.

For example, this overflow occurs on ARM32 with:
start = 0xC0000000 and size = 0x40000000
then start + size = 0x100000000 and end = 0x0.

For information the function behavior change with risk of regression,
if we just shift start and size before the addition.
Example with 2MB section size:
  MMU_SECTION_SIZE 0x200000 and MMU_SECTION_SHIFT = 21
  with start = 0x1000000, size = 0x1000000,
  - with the proposed patch, start = 0 and end = 0x1 as previously
  - with the more simple patch:
    end = (start >> MMU_SECTION_SHIFT) + (size >> MMU_SECTION_SHIFT)
    the value of end change:
    start >> 21 = 0, size >> 21 = 0 and end = 0x0 !!!

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-01 11:34:01 -04:00
Patrick Delaunay
2e8d68e241 arm: caches: add DCACHE_DEFAULT_OPTION
Add the new flags DCACHE_DEFAULT_OPTION to define the default
option to use according the compilation flags
CONFIG_SYS_ARM_CACHE_*.

This new compilation flag allows to simplify dram_bank_mmu_setup()
and can be used as third parameter (option=dcache option to select)
of mmu_set_region_dcache_behaviour function.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-01 11:34:01 -04:00
Patrick Delaunay
c8ec1e3ff5 arm: caches: protect dram_bank_mmu_setup access to bi_dram
Add protection in dram_bank_mmu_setup() to avoid access to bd->bi_dram
before relocation.

This patch allow to use the generic weak function dram_bank_mmu_setup
to activate the MMU and the data cache in SPL or in U-Boot before
relocation, when bd->bi_dram is not yet initialized.

In this cases, the MMU must be initialized explicitly with
mmu_set_region_dcache_behaviour function.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-01 11:34:01 -04:00
Patrick Delaunay
f8dc7f2f18 configs: migrate CONFIG_SYS_ARM_CACHE_* in Kconfig
Move CONFIG_SYS_ARM_CACHE_WRITETHROUGH and
CONFIG_SYS_ARM_CACHE_WRITEALLOC into Kconfig done by moveconfig.py.

Kconfig uses a choice between the 3 values supported in U-Boot,
including the new configuration CONFIG_SYS_ARM_CACHE_WRITEBACK
(the default configuration).

The patch also avoids to select simultaneously 2 configurations.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-01 11:34:01 -04:00
Alifer Moraes
ef99f3d9e8 arm: imx: Add support for Google's Coral Dev Board
Add initial support for Google's Coral Dev Board based on i.MX8MQ.

https://coral.ai/products/dev-board

The Phanbell naming has been used here to match the naming convention
used in Google's U-Boot source tree:

https://coral.googlesource.com/uboot-imx/

Co-developed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
Tested-by: Marco Franchi <marcofrk@gmail.com>
2020-05-01 13:49:15 +02:00
Marek Vasut
d304e7ace3 ARM: imx8m: Fix reset in SPL on Toradex iMX8MM Verdin
Board files should not re-implement do_reset() to work around this
function not being defined in for specific configurations. Rather,
the fix is to compile in drivers which implement this properly.
This patch enables sysreset and watchdog drivers in SPL and ties
them together to implement the same as the do_reset() hack in the
board file, except correctly in the DM/DT framework.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Harald Seiler <hws@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-05-01 13:46:22 +02:00
Marek Vasut
f24dea4e1b ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK
Board files should not re-implement do_reset() to work around this
function not being defined in for specific configurations. Rather,
the fix is to compile in drivers which implement this properly.
This patch enables sysreset and watchdog drivers in SPL and ties
them together to implement the same as the do_reset() hack in the
board file, except correctly in the DM/DT framework.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Harald Seiler <hws@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-05-01 13:46:22 +02:00
Marek Vasut
2455f91833 ARM: imx8m: Fix reset in SPL on NXP iMX8MN EVK
Board files should not re-implement do_reset() to work around this
function not being defined in for specific configurations. Rather,
the fix is to compile in drivers which implement this properly.
This patch enables sysreset and watchdog drivers in SPL and ties
them together to implement the same as the do_reset() hack in the
board file, except correctly in the DM/DT framework.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Harald Seiler <hws@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-05-01 13:46:22 +02:00
Marek Vasut
77cfd0d2b6 ARM: imx8m: Fix reset in SPL on NXP iMX8MM EVK
Board files should not re-implement do_reset() to work around this
function not being defined in for specific configurations. Rather,
the fix is to compile in drivers which implement this properly.
This patch enables sysreset and watchdog drivers in SPL and ties
them together to implement the same as the do_reset() hack in the
board file, except correctly in the DM/DT framework.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Harald Seiler <hws@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-05-01 13:46:22 +02:00
Claudius Heine
c5635a032a ARM: imx8m: Don't use the addr parameter of reset_cpu()
imx8m has the only implementation of reset_cpu() which does not ignore
the addr parameter and instead gives it some meaning as the base address
of watchdog registers.  This breaks convention with the rest of U-Boot
where the parameter is ignored and callers are passing in 0.

Fixes: d2041725e8 ("imx8m: restrict reset_cpu")
Co-developed-by: Harald Seiler <hws@denx.de>
Signed-off-by: Harald Seiler <hws@denx.de>
Signed-off-by: Claudius Heine <ch@denx.de>
2020-05-01 13:46:22 +02:00
Harald Seiler
568af92679 ARM: imx8m: Fix indentation of reset_cpu() function
Use proper code-style, tabs instead of spaces for indentation.

Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 13:46:22 +02:00
Marek Vasut
efa1a62ad2 ARM: imx8m: Do not define do_reset() if sysreset is enabled
The SPL can also be compiled with sysreset drivers just fine, so
update the condition to cater for that option.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Harald Seiler <hws@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-05-01 13:46:22 +02:00
Marek Vasut
dabaabd3f1 ARM: imx: imx8m: Do not warn about cpu-idle-states if missing
If the cpu-idle-states is missing from the DT in the first place, do
not fail on removing in. Just move on and do not even print an error,
since not being able to remove something which is not there in the
first place is not an error and surely does not justify failing to
boot.

Turn the surrounding prints into debugs to reduce the useless noise.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:22 +02:00
Adam Ford
87372fed19 arm: dts: imx8mm: sync dts from Linux Kernel 5.6.7
This patch synchronizes the device tree with that from 5.6.7.

This also adds nodes for crypto and ddrc, which makes keeping
the device tree files from individual boards in sync with the
Linux kernel.  This is helpful when boads reference those nodes.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-01 13:46:22 +02:00
Claudius Heine
3675d93875 imx: imx8m: Don't use the addr parameter of reset_cpu
imx8m has the only implementation of `reset_cpu` which does not ignore
the addr parameter and instead gives it some meaning as the base address
of watchdog registers.  This breaks convention with the rest of U-Boot
where the parameter is ignored and callers are passing in 0.

Fixes: d2041725e8 ("imx8m: restrict reset_cpu")
Co-Authored-by: Harald Seiler <hws@denx.de>
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-05-01 13:46:22 +02:00
Claudius Heine
b46e6cc581 ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them
In case CONFIG_SYSRESET is set, do_reset from reset.c will not be available
anywere, even if SYSRESET is disabled for SPL/TPL.

'do_reset' is called from SPL for instance from the panic handler and
PANIC_HANG is not set

Signed-off-by: Claudius Heine <ch@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-05-01 13:46:22 +02:00
Franck LENORMAND
242d1cd69b imx8: Configure SNVS
Add a module to configure the tamper and secure violation of
the SNVS using the SCU API.

The module also adds some commands:
 - snvs_cfg: Configure the SNVS HP and LP registers
 - snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP)
 - tamper_pin_cfg: Change the configuration of the tamper pins
 - snvs_clear_status: Allow to write to LPSR and LPTDSR to clear
   status bits

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Ye Li
73d769d8af imx8: Update SCFW API to version 1.5
Sync the latest SCFW API with below commit
6dcd0242ae7a53ac ("SCF-105: Revert accidental change") to add
interfaces for PM resource reset and read/write SNVS security
violation and tamper DGO registers.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Breno Lima
f959594db2 imx8: scu api: Add support for SECO manufacturing protection APIs
SECO provides APIs to support CAAM manufacturing protection:

- sc_seco_get_mp_key()
- sc_seco_get_mp_sign()
- sc_seco_update_mpmr()

Add SCFW APIs support.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Ye Li
7247974643 imx8m: Enable WDOG_B for timeout
When doing reset_cpu, in normal case the WDOG_B outputs immediately
after we clean WDA bit. But on mscale, the WDOG_B may be later than
internal reset, and cause PMIC not reset. As we enabled the SD3.0
support, the PMIC must be reset to reset SD card.

Change the reset_cpu to enable the WDOG_B for timeout as well, and set
WDOG timeout to 1s.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Ye Li
1c97fcda7f imx8mm: clock: fix fracpll decode issue
The fracpll decoding is using the bit definitions for int pll. Most of
them are same, but the CLKE bit is different. Fix the wrong CLKE_MASK
for fracpll and correct all bit definitions in fracpll decoding.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Peng Fan
828ad358a5 imx8: parser: fix some bad debug message formating
In SPL build, the formatting '%llx' in debug() is not supported.
Also, fix some misplaced parameters in printf.

Modified from Seb Fagard's downstream patch

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Seb Fagard
0e248b5f02 imx8: ahab: fix some bad debug message formating
In SPL build, the formatting '%llx' in debug() is not supported.
Also, fix some misplaced parameters in printf.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Seb Fagard <sebastien.fagard@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Peng Fan
abf7752c40 imx8: ahab: fix 'end address' parameter of rm_find_memreg
parameter 'end address' must be inclusive of address range.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Ye Li
a903e13f97 imx8: Change to use new SECO API commands
Latest SCFW has removed old MISC SECO commands. So update the codes
to use new SECO commands.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
b7328de6cd imx8: parser: fix 'end address' parameter of rm_find_memreg
parameter 'end address' must be inclusive of address range.

Modified from Seb's downstream patch.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Ye Li
6fcd0b2388 imx8m: Dump DRAM PLL rate by clocks command
Add the dump of DRAM PLL into "clocks" command

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
712a341c76 imx8mq: Set ARM core clock directly from ARM PLL
For ARM core clock, there are two input branches, and can select via mux:
one from ARM PLL directly, second from CCM A53 clock root.

Currently we are using second branch. But IC confirmed the CCM A53 root
signoff timing is 1Ghz, so we should switch to input from ARM PLL directly.

This patch fixes the CORE SEL slice configuration and switch ARM clock
to ARM PLL.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Ye Li
15a7426045 imx8mq: Enable eMMC HS400 and SD UHS mode on EVK
iMX8MQ EVK board has a eMMC5.0 chip and supports SD3.0, so enable the UHS
and HS400 configs to enhance the eMMC/SD access.

The change also needs to set usdhc clock to 400Mhz, and add the
off-on-delay-us to SD reset pin, otherwise some SD cards will
fail to select UHS mode in re-initialization.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
6b87b3f4dc imx8m: update clock root and fix core_sel
Update clock root table to let it be easy to configure clock at
very early stage. Also the core_sel mux parent should be A53 CLK
root and ARM PLL.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
a07bcec403 imx8m: acquire ATF commit hash
Acquire ATF commit hash when booting U-Boot to make user easy
to know the ATF version.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
3f49742801 imx8: move SIP macro to common header
Move the SIP macro to common header and unify the name to
make others could reuse them.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
9b4e197d4b imx: update is_imx6ull to include i.MX6ULZ
Update is_imx6ull helper to include i.MX6ULZ SoC. i.MX6ULZ could
share same macro, then we no need to add is_imx6ulz in various drivers.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
c915403218 imx: imx8m: add i.MX8MN variants support
Add i.MX8MN variants support

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
cb1a1de6a0 imx: imx8m: add i.MX8MQ Dual and QuadLite support
Add i.MX8MQ Dual and QuadLite variants.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
354dcce682 imx: cpu: support speed grade for i.MX8MP
i.MX8MP speed grade use same layout as i.MX8MN, so reuse it for i.MX8MP

Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
47586a4a55 imx8mn: Update speed grade
imx8mn speed grade fuse uses new definitions as below. So have
to update get_cpu_speed_grade_hz function to match it.

SPEED_GRADE[5:4]    SPEED_GRADE[3:0]    MHz
      xx                0000            2300
      xx                0001            2200
      xx                0010            2100
      xx                0011            2000
      xx                0100            1900
      xx                0101            1800
      xx                0110            1700
      xx                0111            1600
      xx                1000            1500
      xx                1001            1400
      xx                1010            1300
      xx                1011            1200
      xx                1100            1100
      xx                1101            1000
      xx                1110             900
      xx                1111             800

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:21 +02:00
Ye Li
c9a1a24be5 imx8mm: Update CPU speed grading
According to iMX8MM datasheet (IMX8MMIEC_Rev_D and IMX8MMCEC_Rev_D),
the speed grading for imx8mm is 800Mhz, 1.2Ghz, 1.6Ghz and 1.8Ghz.
Update them to get_cpu_speed_grade_hz function.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
499c94975e imx: fix cpu_type helper
i.MX8MP use 0x182 as its ID, so 0xff is not valid to get the cpu type,
extend it to 0x1ff.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Marek Vasut
126dcc925d ARM: imx: imx8mm: Add missing clock entries for FEC clock
All the FEC ethernet clock entries for iMX8MM are missing, while they
are already present on iMX8MQ. Fill in the nodes on iMX8MM, as the FEC
ethernet gets bogus clock information otherwise which makes ethernet
inoperable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:21 +02:00
Deepak Das
d597e61374 rockchip: rk3399: Add Nanopi M4 2GB board support
commit b2f5da9dd0 ("rockchip: rk3399: Add Nanopi M4 board support") added
support for Nanopi M4 board with Dual-Channel 4GB LPDDR3-1866 RAM.
This patch adds another variant of NanoPi M4 board with Dual-Channel
2GB DDR3-1866 RAM.

Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-01 18:32:56 +08:00
Suniel Mahesh
f417d71ea7 rk3399: Add ROC-RK3399-PC Mezzanine board
Add Firefly ROC-RK3399-PC Mezzanine board which is an
extension board on top of roc-rk3399-pc.

Will drop the separate defconfig file, once we support
the board detection at runtime.

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Jagan Teki
fb3f5cdbf1 arm: dts: rk3399: Sync roc-pc-mezzanine from v5.7-rc1
Sync Firefly ROC-RK3399-PC Mezzanine Board dts file
from Linux v5.7-rc1.

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Jagan Teki
167efc2c7a arm64: dts: rk3399: Sync v5.7-rc1 from Linux
Sync rk3399 dts(i) files from v5.7-rc1 linux-next.

Reason:
To get updated PCIe nodes and properties on respective
dts(i) files.

Summary:
- sync won't include new board dts(i)
- sync will add required files used on respective dts(i)
- rk3399-puma-u-boot.dtsi spiflash label changed to norflash
- move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi
- move legacy max-frequency of sdhci into rk3399-u-boot.dtsi
- update cross-ec-[keyboard|sbs].dtsi path as per U-Boot
- keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Jagan Teki
f44bf1b5b1 arm64: dts: rk3399-evb: Move u-boot properties into -u-boot.dtsi
Move U-Boot specific properties into rk3399-evb u-boot
specific dtsi file.

This would help to sync the devicetrees from Linux whenever
required instead of adding specific nodes.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Jagan Teki
4888fbe935 arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi
Move U-Boot specific properties into rk3399-puma u-boot
specific dtsi file.

This would help to sync the devicetrees from Linux whenever
required instead of adding specific nodes.

Cc: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Chen-Yu Tsai
062baa2566 rockchip: dts: rock64: Fix XHCI usage
If the VBUS regulator is always-on, XHCI will fail to detect USB 3.0
devices; USB 2.0 devices will work however.

Make the VBUS regulator controllable and tie it to only the XHCI. This
makes all three USB ports usable.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Chen-Yu Tsai
bab972948e rockchip: rk3328: Add support for ROC-RK3328-CC board
The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit
card size development board based on the Rockchip RK3328 SoC, with:

  - 1/2/4 GB DDR4 DRAM
  - eMMC connector for optional module
  - micro SD card slot
  - 1 x USB 3.0 host port
  - 2 x USB 2.0 host port
  - 1 x USB 2.0 OTG port
  - HDMI video output
  - TRRS connector with audio and composite video output
  - gigabit Ethernet
  - consumer IR receiver
  - debug UART pins

The ROC-RK3328-CC has the enable pin of the SD card power switch tied
to GPIO_0_D6. This pin also has the function SDMMC0_PWREN, which is
muxed by default. SDMMC0_PWREN is an active high signal controlled by
the MMC controller, however the switch enable is active low, and
pulled low (enabled) by default to make things work on boot.

As such, we need to mux away from SDMMC0_PWREN and use GPIO to enable
power to the card. The default GPIO state for the pin is pull-down and
input, which doesn't require extra configuration when paired with the
external pull-down and active low switch.

Deal with this by enabling regulator support in SPL, and setting
"u-boot,dm-spl" for the regulator and other device nodes needed for
muxing the pin.

The device tree file is synced from the Linux kernel next-20200324.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Chen-Yu Tsai
50cbff7cf3 rockchip: dts: rk3328: Sync device tree files from Linux
This syncs rk3328 device tree files from the Linux kernel next-20200324.
The last commit to touch these files is:

    b2411befed60 ("arm64: dts: add bus to rockchip amba nodenames")

Additional changes not yet in the Linux kernel include:

    arm64: dts: rockchip: rk3328: drop #address-cells, #size-cells from grf node
    arm64: dts: rockchip: rk3328: drop non-existent gmac2phy pinmux options
    arm64: dts: rockchip: rk3328: Replace RK805 PMIC node name with "pmic"

Changes include:

  - conversion of raw pin numbers to macros
  - removal of deprecated RK_FUNC_* macros
  - update of device tree binding headers
  - new devices
  - device tree cleanups
  - gmac2phy disabled in -u-boot.dtsi as it is not supported in U-boot

This includes a re-ordering of the USB device nodes compared to upstream
Linux, moving the dwc2 OTG controller after the EHCI/OHCI nodes. This is
currently required as otherwise the dwc2 controller would not be able to
detect devices in some cases. This may be due to lack of USB PHY support
in U-boot.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-05-01 18:32:56 +08:00
Chen-Yu Tsai
32fd6169a1 rockchip: dts: rk3328: Move OTG node's hnp-srp-disable to rk3328-u-boot.dtsi
The "hnp-srp-disable" property for dwc2 is specific to U-boot, not part
of upstream Linux's device tree bindings.

Move it to rk3328-u-boot.dtsi to avoid losing it when syncing device
tree files.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Chen-Yu Tsai
032ca153e2 rockchip: dts: rk3328-evb: Move gmac2io related nodes to -u-boot.dtsi
The device tree file for rk3328-evb in the Linux kernel does not have
gmac2io enabled. Instead, gmac2phy is enabled, but that is not supported
in U-boot.

Move the gmac2io related nodes to rk3328-evb-u-boot.dtsi to preserve the
current functionality. When the device tree files are synced, gmac2phy
should be marked as "broken" in -u-boot.dtsi files.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Loic Devulder <ldevulder@suse.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-05-01 18:32:56 +08:00
Chen-Yu Tsai
9a03177378 rockchip: dts: rk3328-evb: Move vcc5v0-host-xhci-drv to -u-boot.dtsi
USB 3.0 is only supported in U-boot, not in the Linux kernel where the
device tree files are ultimately synced from. While the xhci node was
moved, the external vbus regulator was not.

Move it as well.

Fixes: 2e91e2025c ("rockchip: rk3328: migrate u-boot node to -u-boot.dtsi")
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Loic Devulder <ldevulder@suse.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-05-01 18:32:56 +08:00
Tom Rini
b641dd3ec8 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- distro boot support for SPI flash
- sifive spi flash driver
2020-04-30 18:05:15 -04:00
Jagan Teki
286bcdb40f sifive: fu540: Enable spi-nor flash support
HiFive Unleashed A00 support is25wp256 spi-nor flash,
So enable the same and add test result log for future
reference.

Tested on SiFive FU540 board.

Thanks to Sagar for various use cases and tests.

[QUAD mode in dt with spi-tx-bus-width: <4>]
 pp opcode      = 0x34 [QUAD MODE]
 read opcode  = 0x6c  [QUAD MODE]
 erase opcode = 0x21

SPI-NOR:
1. erase entire flash: Pass
2. write entire flash: Pass
3. read entire flash: Pass
4. cmp 32MiB read back data: Pass
5. MMC: Booted Linux and dtb from mmc

[SPI MODE in dt with spi-tx-bus-width: <1>]
pp opcode     = 0x12 [SPI MODE]
read opcode  = 0xc   [SPI MODE]
erase opcode = 0x21

SPI-NOR:
1. erase entire flash: Pass
2. write entire flash: Pass
3. read entire flash: Pass
4. cmp 32MiB read back data: Pass
5. MMC: Booted Linux and dtb from mmc

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Jagan Teki
0edb066ce5 riscv: dts: hifive-unleashed-a00: Add -u-boot.dtsi
Add U-Boot specific dts file for hifive-unleashed-a00, this
would help to add u-boot specific properties and other node
changes without touching the base dts(i) files which are easy
to sync from Linux.

Added spi2 alias for qspi2 as an initial u-boot specific
property change.

spi probing in current dm model is very much rely on aliases
numbering. Even though the qspi2 can't come under any associated
spi nor flash it would require to specify the same to make proper
binding happen for other spi slaves.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Tom Rini
9f0a6df3a5 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- DM ACPI support (Part A)
- Improve support for chain-loading x86 U-Boot
2020-04-30 13:00:20 -04:00
Tom Rini
6d7dacf726 Xilinx changes for v2020.07-rc2
mmc:
 - Fix dt property handling via generic function
 
 clk:
 - Fix versal watchdog clock setting
 
 nand:
 - Fix zynq nand command comparison
 
 xilinx:
 - Enable ubifs
 - Sync board_late_init configurations with initrd_high setup
 - Make custom distro boot more verbose
 
 zynq:
 - Kconfig alignments
 - Fix nand cse configuration
 
 zynqmp:
 - Fix zcu104 low level qspi configuration
 - Small DT updates
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXqp9yAAKCRDKSWXLKUoM
 IXiuAKCLjBKGQ+o+BkJMvjbydF1JgFdXpwCffFPRe6dTkPsLZhpzW/YQMrjidtg=
 =CQTb
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2020.07-rc2

mmc:
- Fix dt property handling via generic function

clk:
- Fix versal watchdog clock setting

nand:
- Fix zynq nand command comparison

xilinx:
- Enable ubifs
- Sync board_late_init configurations with initrd_high setup
- Make custom distro boot more verbose

zynq:
- Kconfig alignments
- Fix nand cse configuration

zynqmp:
- Fix zcu104 low level qspi configuration
- Small DT updates

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-30 11:34:01 -04:00
Tom Rini
b9da77f195 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb,
  ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb.
- Add GICv3 support for ls1028a, ls2088a, ls1088a.
- Add lpuart support on ls1028aqds.
- Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based
  platforms.
2020-04-30 10:06:54 -04:00
Simon Glass
86ee14f58b x86: Use the existing stack when chain-loading
With chromebook_coral we normally run TPL->SPL->U-Boot. This is the
'bare metal' case.

When running from coreboot we put u-boot.bin in the RW_LEGACY portion
of the image, e.g. with:

   cbfstool image-coral.serial.bin add-flat-binary -r RW_LEGACY \
	-f /tmp/b/chromebook_coral/u-boot.bin -n altfw/u-boot \
	-c lzma -l 0x1110000 -e 0x1110000

In this case U-Boot is run from coreboot (actually Depthcharge, its
payload) so we cannot access CAR. Use the existing stack instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30 17:48:17 +08:00
Simon Glass
cfe7a1068b x86: Add a way to detect running from coreboot
If U-Boot is running from coreboot we need to skip low-level init. Add
an way to detect this and to set the gd flag.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30 17:48:16 +08:00
Simon Glass
33139a0bc7 x86: Move coreboot-table detection into common code
To support detecting booting from coreboot, move the code which locates
the coreboot tables into a common place. Adjust the algorithm slightly to
use a word comparison instead of string, since it is faster.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct the comments to 960KB]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30 17:47:06 +08:00
Simon Glass
526aabec24 x86: cpu: Skip init code when chain loading
When U-Boot is not the first-stage bootloader the interrupt and cache init
must be skipped, as well as init for various peripherals. Update the code
to add checks for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30 17:40:16 +08:00
Simon Glass
52b9beb527 x86: apl: Skip init code when chain loading
When U-Boot is not the first-stage bootloader the FSP-S init must be
skipped. Update it to add a check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30 17:40:16 +08:00
Simon Glass
c793dbdb90 x86: fsp: Allow skipping init code when chain loading
It is useful to be able to boot the same x86 image on a device with or
without a first-stage bootloader. For example, with chromebook_coral, it
is helpful for testing to be able to boot the same U-Boot (complete with
FSP) on bare metal and from coreboot. It allows checking of things like
CPU speed, comparing registers, ACPI tables and the like.

When U-Boot is not the first-stage bootloader much of this code is not
needed and can break booting. Add checks for this to the FSP code.

Rather than checking for the amount of available SDRAM, just use 1GB in
this situation, which should be safe. Using 2GB may run into a memory
hole on some SoCs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30 17:40:16 +08:00
Simon Glass
0b885bcfd9 acpi: Add an acpi command
It is useful to dump ACPI tables in U-Boot to see what has been generated.
Add a command to handle this.

To allow the command to find the tables, add a position into the global
data.

Support subcommands to list and dump the tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Simon Glass
7e586f6907 acpi: Put table-setup code in its own function
We always write three basic tables to ACPI at the start. Move this into
its own function, along with acpi_fill_header(), so we can write a test
for this code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-30 17:16:12 +08:00
Simon Glass
29b351122e acpi: Move acpi_add_table() to generic code
Move this code to a generic location so that we can test it with sandbox.
This requires adding a few new fields to acpi_ctx, so drop the local
variables used in the original code.

Also use mapmem to avoid pointer-to-address casts which don't work on
sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Simon Glass
288edc7821 acpi: Drop code for missing XSDT from acpi_write_rsdp()
We don't actually support tables without an XSDT so we can drop this dead
code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Simon Glass
5f5ab0d3bf x86: Allow devices to write ACPI tables
Call the new core function to permit devices to write their own ACPI
tables. These tables will appear after all other tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00