Commit graph

88117 commits

Author SHA1 Message Date
Kever Yang
a2b1327398 MAINTAINERS: Update rockchip platform maintain files
Add px30, rv1126 soc, and rockchip soc based boards.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-07 13:41:44 -04:00
Eugen Hristev
50429959fb MAINTAINERS: add DT/bindings files to at91 entry
With this change the DT and binding files are under the at91 tree
maintainer, and get_maintainer.pl correctly reports the entry.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-08-07 13:41:44 -04:00
Mathew McBride
29760c8e6d board: ten64: add missing error checks for retimer power on
The retimer reset/power on logic was changed in a recent commit,
however, it neglected to check if the commands sent to the
board microcontroller (to control power to the retimer chip)
actually completed.

Add return checks for these operations so any failures will
be reported to the user.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: 7a041fea2 ("board: traverse: ten64: ensure retimer reset
is done on new board revisions")
2023-08-07 13:41:44 -04:00
Marek Vasut
3cc7708dfd ARM: renesas: Update MAINTAINERS file
Update MAINTAINERS file. Add missing MAINTAINERS file for Spider,
Whitehawk and V3HSK boards. Update mail addresses. Add file globs
to match on DT and driver files related to these boards.

The GRPEACH and R2DPLUS are special in that they are not R-Car
and have their own set of specialized drivers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-07 13:41:43 -04:00
Tom Rini
2940b52227 get_maintainer.pl: Add an ignore list for git history
As Pali Rohár has asked to not be copied on changes to files he is not
a specific maintainer of, add his address to .get_maintainer.ignore.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2023-08-07 13:41:38 -04:00
Tom Rini
60c95b1a26 Azure: Squash a number of jobs and re-order slightly
To reduce overall job time, move a number of smaller jobs together.
These should still be safely under 1 hour total time, but reducing the
overall number of jobs should help with the queue slightly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-07 10:19:23 -04:00
Tom Rini
ccbc785e24 Azure: Rework Rockchip jobs again
The job for rockchip vendor platforms has again gotten close to or
exceeded one hour.  Rework things such that we move the 32bit platforms
back to the general 32bit ARM job (as there's time there) and make these
build only the 64bit platforms.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-07 10:19:22 -04:00
Tom Rini
b1a8ef746f binman support for Xilinx signing
buildman minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmTOp5wRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYApAf+P45nQXX2L0lFpu5vJQ+Xy1VHDh+OE5sU
 yVWm2A0zc7L0TyLn4fX5PGF+1C7gZjYGQ6I9OVroS58fXR5o6WjCelCMhE1wxL5i
 AgHKmrUUw6XUalF317RquRWDPLAD6KZ1T8XUgjF2PnBwd2RwMH4zW/Ls73UFBf+4
 gIi0zlqLsX8zSeFAyitRWobM4gJT4PUAxz7jexBEk9y3EjOufcLqpdl2Y4JAxTtl
 82AYy9nJbPyFrT9lIGP9nfPenVPGKL6wdzc5C/sGLeRlutNKgrJTnjWRkJV+ThPx
 mIZVSzwi2cbYnMpq1nEGnj+cH6R73xxybj17MVzevyAQNXAZcZfQ+Q==
 =Nbd9
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5aug23' of https://source.denx.de/u-boot/custodians/u-boot-dm

binman support for Xilinx signing
buildman minor fixes
2023-08-05 22:11:04 -04:00
Simon Glass
48d4c0a85d buildman: Drop warning about orphaned defconfigs
Some boards use a MAINTAINERS entry to specify common files without
referencing any defconfigs. This is allowed and should not result in a
warning.

Drop the warning in this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-05 11:39:23 -06:00
Simon Glass
1c81e0808b buildman: Exit after reading toolchain
Recent refactoring changed buildman to continue operation after fetching
a toolchain. Fix this.

Fixes: b868064652 ("bulidman: Move toolchain handling to a function")

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-05 11:39:23 -06:00
Jaehoon Chung
b49662083f event: Fix a wrong type_name from dm_post_init to dm_post_init_f
DM_POST_INIT was changed to DM_POST_INIT_F.
To debug correct message, change type_name from dm_post_init to
dm_post_init_f.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
s/an/a/ :
Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-05 11:39:23 -06:00
Lukas Funke
d8a2d3b290 binman: ftest: Add test for xilinx-bootgen etype
Add test for the 'xilinx-bootgen' etype

Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allow missing bootgen tool; comment testXilinxBootgenMissing() comment:
Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-05 11:38:59 -06:00
Lukas Funke
7fcfa9d930 binman: etype: Add xilinx-bootgen etype
This adds a new etype 'xilinx-bootgen'. By using this etype it is
possible to created an signed SPL (FSBL in Xilinx terms) for
ZynqMP boards.

The etype uses Xilinx Bootgen tools in order to transform the SPL into
a bootable image and sign the image with a given primary and secondary
public key. For more information to signing the FSBL please refer to the
Xilinx Bootgen documentation.

Here is an example of the etype in use:

    spl {
        filename = "boot.signed.bin";

        xilinx-bootgen {
            pmufw-filename = "pmu-firmware.elf";
            psk-key-name-hint = "psk0";
            ssk-key-name-hint = "ssk0";
            auth-params = "ppk_select=0", "spk_id=0x00000000";

            u-boot-spl-nodtb {
            };
            u-boot-spl-dtb {
            };
        };
    };

For this to work the hash of the primary public key has to be fused
into the ZynqMP device and authentication (RSA_EN) has to be set.

For testing purposes: if ppk hash check should be skipped one can add
the property 'fsbl_config = "bh_auth_enable";' to the etype. However,
this should only be used for testing(!).

Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-05 11:33:18 -06:00
Lukas Funke
7f51fe5c6d binman: btool: Add Xilinx Bootgen btool
Add the Xilinx Bootgen as bintool. Xilinx Bootgen is used to create
bootable SPL (FSBL in Xilinx terms) images for Zynq/ZynqMP devices. The
btool creates a signed version of the SPL. Additionally to signing the
key source for the decryption engine can be passend to the boot image.

Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
2023-08-05 11:31:59 -06:00
Simon Glass
93a203d38b binman: Renumber 291 and 292 test files
These have ended up with the same numbers as earlier files. Fix them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-05 11:31:59 -06:00
Tom Rini
fd13001d13 Merge https://source.denx.de/u-boot/custodians/u-boot-usb
- Fix some issues with usb gadget ethernet.  A small set of updates for
  docs, etc, is still pending
2023-08-05 12:24:33 -04:00
Tom Rini
276c0c8e8a cmd: Enable BIND by default if we have USB_ETHER
The nature of the network stack means that if we are going to use the
gadget mode USB network driver there's no easy path to implicitly
bind/unbind the driver. Enable the "bind" command by default here so
that we can bind/unbind this as needed.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-08-05 06:05:06 +02:00
Marek Vasut
718f1d414e usb: gadget: ether: Handle gadget driver registration in probe and remove
Move the ethernet gadget driver registration and removal from ethernet
bind and unbind callbacks into driver DM probe and remove callbacks.
This way, when the driver is bound, which is triggered deliberately
using 'bind' command, the USB ethernet gadget driver is instantiated
and bound to the matching UDC. In reverse, when the driver is unbound,
which is again triggered deliberately using 'unbind' command, the USB
ethernet gadget driver instance is removed.

Effectively, this now behaves like running either 'ums' or 'dfu' or
any other commands utilizing USB gadget functionality.

This also drops use of usb_gadget_release() and moves the use of
usb_gadget_initialize() into usb_ether_init() used only by legacy
platforms that do not use 'bind' command properly yet. Those have
no place in drivers.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-05 06:02:28 +02:00
Marek Vasut
47b121f46c usb: gadget: ether: Move probe function above driver structure
Move the driver probe function above the driver structure, so it
can be placed alongside other related functions, like upcoming
remove function. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Tom Rini <trini@konsulko.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-05 06:02:28 +02:00
Marek Vasut
da768f9c62 usb: gadget: ether: Inline functions used once
These functions here are only ever called once since drop of non-DM
networking code. Inline them. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Tom Rini <trini@konsulko.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-05 06:02:28 +02:00
Tom Rini
9787da0d32 Merge branch '2023-08-04-toradex-platform-updates'
Two Toradex platform series.  First, to quote Andrejs:

This series adds Yavia Carrier board name string to the known
Toradex carrier board list, and reworks carrier board and display
adapter name handling.

And then to quote Marcel:
This series adds initial support for the Toradex Verdin AM62 SoM.
The first commit adds resp. PID4s to the ConfigBlock, the second one
fixes an early clocking issue confirmed to be a weird bug in TI's
scripting, the third one fixes some binman labeling issue. And last but
not least support for the Toradex Verdin AM62 is added.
2023-08-04 16:04:11 -04:00
Marcel Ziswiler
7d1a10659f board: toradex: add verdin am62 support
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
V1.0A module and subsequent V1.1 launch configuration SKUs. They are
strapped to boot from their on-module eMMC. U-Boot supports booting
from the on-module eMMC only, DFU support is disabled for now due to
missing AM62x USB support.

The device trees were taken straight from Linux v6.5-rc1.

Boot sequence is:
SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE
  ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img)

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-04 15:03:42 -04:00
Marcel Ziswiler
e5fe63d4f6 arm: dts: k3-binman: fix rcfg_yaml and pcfg_yaml labels
Fix rcfg_yaml to really point to rm-cfg.yaml and pcfg_yaml to really
point to pm-cfg.yaml which likely is the intention.

While at it also add labels for the remaining items like custmpk_pem,
dkey_pem, bcfg_yaml_sysfw, scfg_yaml_sysfw, pcfg_yaml_sysfw and
rcfg_yaml_sysfw.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-04 15:03:39 -04:00
Marcel Ziswiler
5c87b19c8e arm: mach-k3: am62: fix 2nd mux option of clkout0
Fix second mux option of clkout0 which should really be
DEV_BOARD0_CLKOUT0_IN_PARENT_HSDIV4_16FFT_MAIN_2_HSDIVOUT1_CLK10
rather than twice the same according to [1].

[1] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/am62x/clocks.html#clocks-for-board0-device

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-04 15:03:34 -04:00
Marcel Ziswiler
0bcfda1b51 toradex: tdx-cfg-block: add verdin am62 skus
Add initial Verdin AM62 Quad 1GB WB IT prototype and launch
configuration SKUs to ConfigBlock handling.

0069: Verdin AM62 Quad 1GB WB IT
0071: Verdin AM62 Solo 512MB
0072: Verdin AM62 Solo 512MB WB IT
0073: Verdin AM62 Dual 1GB ET
0074: Verdin AM62 Dual 1GB IT
0075: Verdin AM62 Dual 1GB WB IT
0076: Verdin AM62 Quad 2GB WB IT

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
2023-08-04 13:32:39 -04:00
Max Krummenacher
a0383427b3 toradex: tdx-cfg-block: rework display adapter name handling
Rework the rather big array of zero length strings with 4 entries of
actual display adapter names to a array of structs which ties a pid4
to its correspondent human readable string.
Provide an accessor to get the string for a given PID4.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2023-08-04 13:32:39 -04:00
Max Krummenacher
39e521f756 toradex: tdx-cfg-block: rework carrier board name handling
Rework the rather big array of zero length strings with 4 entries of
actual carrier board names to a array of structs which ties a pid4
to its correspondent human readable string.
Provide an accessor to get the string for a given PID4.
Rework the user of the information to use the accessor.

Note that check_pid8_sanity() is used for early samples of Dahlia and
the development board. Yavia isn't affected.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2023-08-04 13:32:39 -04:00
Max Krummenacher
94757b47f1 toradex: tdx-cfg-block: add yavia carrier cfg block info
Add the Yavia Carrier board name string to the known carrier
board list.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2023-08-04 13:32:26 -04:00
Tom Rini
989892f580 Merge branch '2023-08-03-assorted-fixes'
- More MAINTAINERS file updates, bootstd fixes, a fat fix and debug
  message fix
2023-08-03 17:45:38 -04:00
Simon Glass
11158aef89 bootstd: Init the size before reading extlinux file
The implementation in extlinux_pxe_getfile() does not pass a valid size
to bootmeth_read_file(), so this can fail if the uninited value happens to
be too small.

Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-03 15:30:54 -04:00
Simon Glass
2984d21a28 bootstd: Init the size before reading the devicetree
The implementation in distro_efi_try_bootflow_files() does not pass a
valid size to bootmeth_common_read_file(), so this can fail if the
uninted value happens to be too small.

Fix this.

This was reported by someone but I cannot now find the email.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-03 15:30:54 -04:00
Simon Glass
6a8c2f9781 bootstd: Avoid allocating memory for the EFI file
The current bootflow-iteration algorithm reads the bootflow file into
an allocated memory buffer so it can be examined. This works well in
most cases.

However, while the common case is that the first bootflow is immediately
booted, it is also possible just to scan for available bootflows, perhaps
selecting one to boot later.

Even with the common case, EFI bootflows can be quite large. It doesn't
make sense to read it into an allocated buffer when we have kernel_addr_t
providing a suitable address for it. Even if we do have plenty of malloc()
space available, it is a violation of U-Boot's lazy-init principle to
read the bootflow before it is needed.

So overall it seems better to make a change.

Adjust the logic to read just the size of the EFI file at first. Later,
when the bootflow is booted, read the rest of the file into the designated
kernel buffer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Da Xue <da@libre.computer>
Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
2023-08-03 15:30:54 -04:00
Simon Glass
146242cc99 bootstd: Use a function to detect network in EFI bootmeth
This checks for a network-based bootflow in two places, one of which is
less than ideal. Move the correct test into a function and use it in both
places.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-03 15:30:54 -04:00
Simon Glass
0c0c82b517 bootflow: Export setup_fs()
This function is used in some bootmeth implementations. Export it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-03 15:30:53 -04:00
Heinrich Schuchardt
63baa84129 virtio: provide driver name in debug message
If a driver cannot be bound, provide the driver name in the debug
message. Now the debug message may look like this:

    (virtio-pci.l#0): virtio-rng driver not configured

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-03 15:30:53 -04:00
Heinrich Schuchardt
42cd759a37 fat: correct sign for deletion mark
The FAT file systems uses character '\xe5' to mark a deleted directory
entry. If a file name starts with this character, it is substituted by
'\x05' in the directory entry.

While (signed char)'\xe5' is a negative number 0xe5 is a positive integer
number. We therefore have define a constant DELETED_MARK which matches the
signedness of the characters in the directory entry.

Correct a comparison where we used the constant 0xe5 with the wrong sign.
Use the constant aRING instead of 0x05 like in the rest of the code.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 57b745e238 ("fs: fat: call set_name() only once")
Fixes: 28cef9ca2e ("fs: fat: create correct short names")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-03 15:30:53 -04:00
Tom Rini
e205fbcea0 rzn1-snarc: Add missing MAINTAINERS file
This should have been included when the platform was added, make one
now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-03 15:30:53 -04:00
Tom Rini
eda90d2467 board/freescale: Drop two orphaned entries
As the defconfig files here have been removed we can also remove the
entries.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-03 15:30:53 -04:00
Tom Rini
b54fad3fe2 vexpress64: Rework MAINTAINERS file slightly
Given that we no longer have a configs/vexpress_aemv8a_defconfig file,
drop that and then include at least the aarch64-specific config.h file
here.  Also move Linus and Peter up to the main entry as well so that
they'll get tagged for the board code too and not literally only the
defconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-03 15:30:53 -04:00
Marek Vasut
c2ad5318d2 ARM: imx: Update MAINTAINERS file on DH electronics i.MX8M Plus DHCOM
Make use of globs to cover all the DTs and defconfigs.
Fill in missing DH u-boot list name.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-08-03 15:30:53 -04:00
Sean Anderson
aa423f2bc6 freescale: Remove Rajesh Bhagat MAINTAINERS
Rajesh's email bounces. Remove his email from all boards he maintains.
Fortunately, he has co-maintainers on most boards. I have taken the
liberty of volunteering Pramod to maintain the LS1012AFRDM, since he
also maintains the LS1012AFRWY. Let me know if the board should be
orphaned instead.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2023-08-03 15:30:53 -04:00
Tom Rini
6cdd4b8108 Pull request efi-2023-10-rc2-2
Documentation:
 
 * Move README.falcon to HTML
 * Describe usage of QEMU virtio block device
 * Add SPDX license identifiers to svg images
 * Add more detail to the description of U-Boot boot phases
 
 UEFI:
 
 * Fix buffer overflows
 * Fix memory leak in efi_add_memory_map_pg
 * Properly check return values of calloc, uuid_str_to_bin,
   efi_parse_pkcs7_header
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmTLV8oACgkQxIHbvCwF
 GsTRPRAAla07pnV7iKxBI2pJKpSdE/9sU4D3WuN4J7JFGvPnHmDxdIZ4gvjxSg40
 o/LcyOOnZBU5L/qpZkq0C068swGvqkxJb+yciQzLaTCa1XnBm/nwqJL2r9vIeqbo
 L2It2Wnjk0nhc+EBCG6OVi/J3FWgNSJoQITPSGSSAeBcMh1nLwOv/A7PPqk0penx
 SAJOzV40/6fFeuwJpDQaXvl8DnCGVGi5UQn3ToQrJDmoAeL5/vAXUqTlOADvRZFQ
 roT69Riv3FT1S0BmWvU0OTlgaMVkrazWvKMw/wL8tYiacyLJ/fp69ePKhN6FjnMv
 8aNPC+e61LWKGgDy/m9ptlepxI84HLGAT+QqR6KPBpjPOv7d5Q8msM/TBSWS50V3
 1nRL2FIOWgSj7PbcmLazYs8G/pmwni2lRZFr/pzRh1sxE8Ansh812Dwj4Ex0Mvpm
 jjHVUZSb+01Yf8OxrPasLWpGg6vVQ3tNfG8SPjR3SNFzjRPD/UPWa8PgFrHJ9BYk
 1AE22tt2AABFEiSqdSt3ZSMkTzYxa0QZt0UMX9YyfxcWTiJuUgITfkVp3oXEQui6
 D/+rL36/XKfclmpJv7nGheIfivS99K5GbdABf0IRXehNCJAU3bYefVXXmYDD6iqB
 zvNLIrbd77BQPr6+pc/KyucJC7m7wxsPpHHxXXlnP8xilVXlsx4=
 =9hXp
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-10-rc2-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request efi-2023-10-rc2-2

Documentation:

* Move README.falcon to HTML
* Describe usage of QEMU virtio block device
* Add SPDX license identifiers to svg images
* Add more detail to the description of U-Boot boot phases

UEFI:

* Fix buffer overflows
* Fix memory leak in efi_add_memory_map_pg
* Properly check return values of calloc, uuid_str_to_bin,
  efi_parse_pkcs7_header
2023-08-03 12:43:24 -04:00
Tom Rini
8b572a387e Merge branch '2023-08-03-mediatek-and-ten64-updates'
Merge in a series for MediaTek update and another for Ten64.

To quote Weijie Gao for MediaTek:
This patch series add support for MediaTek MT7988 SoC with its reference
boards and related drivers.

This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for
these boards. The clock, pinctrl drivers and the SoC initializaton code
are also included.

Product spec for MT7988:
https://www.mediatek.com/products/broadband-wifi/mediatek-filogic-880

And to quote Mathew McBride for Ten64:
This is a series of updates for the Ten64 board,
that are part of our firmware releases but not yet upstreamed
into U-Boot.

Changes of note include:

- Turning on standard boot support

  Standard boot improves the user experience over distroboot on Ten64,
  as we had various hacks in our firmware to solve some corner-case
  issues (e.g DTB handling) in distroboot, which are not needed with the
  bootflow system.

- Recognition of the new 'RevD' board variant distributed to OEM
  customers

- Fixing various boot issues related to FIT images and operating systems
  running out of the NAND (OpenWrt, recovery environment).

- A better 'opt-out' solution for fsl_setenv_bootcmd for Layerscape
  platforms booting from TF-A.

  This was discussed when the Ten64 was upstreamed into U-Boot. I think
  declaring fsl_setenv_bootcmd as __weak and allowing individual boards
  to override is the best way to do this without significant rework.
  (We actually depend on a similar feature for the DPAA2/MC firmware
  loading)

Compared to our firmware branch, there is still a few features missing (e.g USB
Hub, fan controller and fixes for the VSC8514). Some of these depend on other
things (like sorting out device tree schemas) so may not appear in mainline
U-Boot for a while yet.
2023-08-03 10:34:04 -04:00
Mathew McBride
1c35cc85ad board: ten64: strip extra u-boot compatibles from FDT
The u-boot version of the LS1088A device tree has
an extra compatible (simple-mfd) added to &fsl_mc
to facilitate usage with U-Boot's device model.

Unfortunately FreeBSD will only match the single
"fsl,qoriq-mc" exactly when the node is a "bus"
object, so we need to strip out the extra compatible
before presenting it to the operating system.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
67de5966e6 board: ten64: opt out of fsl_setenv_bootcmd
Our bootcmd is the same regardless of where the SoC
loaded it's code from, so we don't want
fsl_setenv_bootcmd to do anything.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
07164d0ef1 arch: arm: fsl-layerscape: allow "opt-out" of fsl_setenv_bootcmd
Allow individual Layerscape boards to opt-out of fsl_setenv_bootcmd
by declaring the original function as weak.

fsl_setenv_bootcmd is used to change the bootcmd based on the
TF-A boot source (e.g QSPI vs SD/MMC) for reasons including
secure boot / integrity measurements and DPAA2 configuration loading.
See previous discussion at [1].

On the Ten64 board, our bootcmd is the same across
all TF-A boot sources so we don't want this behaviour.

Signed-off-by: Mathew McBride <matt@traverse.com.au>

[1] https://patchwork.ozlabs.org/project/uboot/patch/20211110044639.7070-3-matt@traverse.com.au/#2790037

Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
02a85922bf board: traverse: ten64: adopt standard boot defaults
With the previous updates to the device tree, Ten64
can use Standard Boot 'out of the box'.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
6af6677f01 board: ten64: disable watchdog autostart
The watchdog driver was previously enabled but not used
until U-Boot's fsl-ls1088a.dtsi was updated to describe them.

Some Linux distributions (e.g Debian 11) do not engage the
SP805 watchdogs, causing unexpected resets after boot.

To conserve the user experience, turn off the autostart,
and we will provide a mechanism to turn them on at boot
via env vars.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
06e19a6d3e board: traverse: ten64: set serial# to be 'label' MAC
The GE0 (first Gigabit Ethernet interface) is used as the
'serial number' for the board and appliance.

To ensure the 'true' board S/N is available regardless of how
the DPAA2 subsystem is configured, use serial# so it is passed in
the device tree.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
56610ef5f3 board: traverse: ten64: fix allocation order of MAC addresses
On Ten64 boards, the "serial number" is the MAC address of the
first Gigabit Ethernet interface (labelled GE0 on the appliance),
and counted up from there.

The previous logic did not take into account U-Boot's ordering
of the network interfaces. By setting aliases/ethernetX in the device
tree we can ensure the U-Boot 'ethX' is the same as the labelled
port order on the unit, as well as the one adopted by Linux.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-08-03 09:40:50 -04:00