Commit graph

45555 commits

Author SHA1 Message Date
Thomas Petazzoni
c25c4fd010 board/spear/common: move code to arch/arm/cpu/arm926ejs/spear/
The code in board/spear/common/ is not board-specific but
SoC-specific. Therefore, boards from other vendors than "spear" may
want to re-use this code, which is currently difficult with the code
being placed in board/spear/common/.

Since this code really is SoC-specific, this commit moves it to
arch/arm/cpu/arm926ejs/spear/, with the rest of the SPEAr related
code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-26 14:56:10 -04:00
Wenyou.Yang@microchip.com
fc6adebbc1 board: atmel: Use the new PIT timer driver
Use the Atmel PIT timer driver which supports the driver model
and device tree.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-08-26 14:56:09 -04:00
Wenyou.Yang@microchip.com
47edaea494 driver: timer: Add the Atmel PIT timer driver
Add the new Atmel PIT timer driver, which supports the driver model
and device tree.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-08-26 14:56:08 -04:00
Tom Rini
deff9b1d2a powerpc: Rework interrupt_init_cpu()
The function interrupt_init_cpu() is given an int return type but does
not return anything but 0.  Rework this to be a void function.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Mario Six <mario.six@gdsys.cc>
2017-08-26 14:56:08 -04:00
Reno Farnesi
76216211f8 fs: fat: fix fatwrite overflow calculation
The overflow calculation was incorrect. Adding the start block of the
partition is not needed because the sectors are already relative to the
beginning of the partition. If you attempted to write a file smaller
than cur_part_info.start blocks on a full partition the old calculation
fails to catch the overflow. This would cause an infinite loop in the
determine_fatent function.

Old, incorrect calculation:

ending sector of new file = start sector + file size (in sectors)
last sector = partition start + total sectors on the partition

Adding the partition start block number is not needed because sectors
are already relative to the start of the partition.

New calculation:

ending sector of new file = start sector + file size (in sectors)
last sector = total sectors on the partition

Signed-off-by: Reno Farnesi <nfarnesi4@gmail.com>
2017-08-26 14:56:07 -04:00
Suniel Mahesh
528f2b66dc arm: dts: am33xx: sync DTS with Linux 4.13-rc4
This re-syncs AM33xx DTS file with current file from
Linux v4.13-rc4 to ensure a consistent configuration. Upstream
Linux removed the redundant Interrupt-parent property from mmc,
mac, lcdc and tscadc sub nodes.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-26 14:56:07 -04:00
Jagan Teki
93fd5b0ac1 ram: kconfig: s/SPL/TPL/ in TPL_RAM help text
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-26 14:56:06 -04:00
Simon Glass
e5ec12bbe1 rpi: Enable USB keyboard support
This is currently disabled, so USB keyboards are not detected in U-Boot.
Enable this option to fix that.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Paul Barker <pbarker@toganlabs.com>
2017-08-26 14:55:49 -04:00
Tom Rini
90ae53ce1a fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long
Otherwise:
drivers/usb/gadget/f_fastboot.c:564:32: warning: format "%lx" expects
argument of type "long unsigned int", but argument 3 has type "unsigned
int" [-Wformat=]

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-22 08:20:02 -04:00
Tom Rini
ad8afeaee0 Merge git://www.denx.de/git/u-boot-marvell 2017-08-21 07:17:15 -04:00
Tom Rini
09b6a6dd01 Merge git://git.denx.de/u-boot-usb 2017-08-21 07:16:56 -04:00
Tom Rini
8197d92843 Merge git://git.denx.de/u-boot-uniphier
- Fix unmet direct dependencies warning
 - Remove old sLD3 SoC support
 - Update reset data
 - Add dr_mode DT property to avoid warning
2017-08-21 07:16:16 -04:00
Chris Packham
6ab09b05f3 ARM: mvebu: set correct mem_size for db-88f6820-amc
The db-88f6820-amc has four chips with 2Gb density giving a total of 1GB
DRAM. Update the board_topology_map to reflect the correct
configuration.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-21 11:40:49 +02:00
Lukasz Majewski
5bf4475f1d doc: license: Add license header to the README.dfutftp file
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-08-21 11:31:11 +02:00
Tom Rini
6bafa5a4bd fb_mmc.c: Correct blk_dread() return value checks
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-21 11:31:11 +02:00
Tom Rini
2341c80cd2 common/fb_mmc.c: Fix warnings about casts
When building the flash zImage code on aarch64 we see warnings about
pointer size casts.  Use uintptr_t instead to correct these.

Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-By: Sam Protsenko <semen.protsenko@linaro.org>
2017-08-21 11:31:10 +02:00
John Keeping
7715dea48b fastboot: avoid printing invalid data
There is no guarantee that commands are null-terminated in the USB
request buffer, so limit the length of data that is printed.

Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Steve Rae <steve.rae@raedomain.com>
2017-08-21 11:31:10 +02:00
Peter Chubb
d331084298 Fix fastboot boot address
Fastboot loads an image at CONFIG_FASTBOOT_BUF_ADDR, but currently
tells do_bootm() to look for an image at $loadaddr.  This breaks if
CONFIG_FASTBOOT_BUF_ADDR is different from the current user-set
loadaddr.

Instead, tell do_bootm() to pick up the image where it was laoded.

Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
2017-08-21 11:31:10 +02:00
Bin Meng
a11a5b8ad9 usb: ehci: Convert CONFIG_USB_EHCI_PCI to Kconfig
This converts CONFIG_USB_EHCI_PCI to a Kconfig option, and updates
all boards that use it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-21 11:30:44 +02:00
Simon Glass
2d7cb5b426 env: Replace all open-coded gd->env_valid values with ENV_ flags
Some of these were missed in the conversion.
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-20 19:27:44 -04:00
Simon Glass
c55d8b9400 env: Allow env_load() to detect errors
Now that we have errors available in the environment driver's load()
method, check the return valid.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-20 19:27:43 -04:00
Tom Rini
eeba55cb4a env: Correct case of no sub-init function
With the change to the environment code to remove the common init stage
of pointing to the default environment and setting it as valid, combined
with the change to switch gd->env_valid from 0/1/2 to an enum we now
must set env_valid to one of the enum values rather than an int.  And in
this case, not only was setting it to an int wrong, it was now the wrong
value.  Finally, in the case of ENV_IS_NOWHERE we must still say that
our envionrment is invalid after init for things to continue to
function.

Fixes: 7938822a6b ("env: Drop common init() functions")
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Reported-by: Marek Vasut <marek.vasut@gmail.com>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v3:
- Actually include changes for env/nowhere.c
2017-08-20 19:27:28 -04:00
Masahiro Yamada
3444d1d40e ARM: dts: uniphier: add dr_mode property to dwc3 node
Since commit 576e3cc700 ("usb: host: xhci-dwc3: Add dual role mode
support from DT"), warning is displayed if dr_mode is not specified.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20 23:07:02 +09:00
Masahiro Yamada
6584b1ea10 reset: uniphier: refactor reset data and add NAND/eMMC reset lines
- Merge sys_reset data of LD4, Pro4, sLD8 and Pro5

  - Merge sys_reset data of LD11 and LD20

  - Use primitive UNIPHIER_RESETX() macro because bit assignments for
    system reset will be changed for every SoC in the future

  - Add NAND and eMMC resets

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20 23:06:20 +09:00
Masahiro Yamada
c5161eee38 Revert "ARM: uniphier: fix ROM boot mode for PH1-sLD3"
This reverts commit 82d075e79f.

Commit 82d075e79f ("ARM: uniphier: fix ROM boot mode for PH1-sLD3")
was a workaround for sLD3.  Now the sLD3 SoC support has been removed.

Revert it to allow to simplify the init code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20 23:05:39 +09:00
Masahiro Yamada
0aa8b2c3e0 Revert "ARM: uniphier: move lowlevel debug init code after page table switch"
This reverts commit bcc51c1512.

Commit bcc51c1512 ("ARM: uniphier: move lowlevel debug init code
after page table switch") was intended to support lowlevel debug for
sLD3.  Now the sLD3 SoC support has been removed.

Revert it to allow to enable lowlevel debug earlier.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20 23:05:39 +09:00
Masahiro Yamada
00aa453ebf ARM: uniphier: remove sLD3 SoC support
This SoC is too old.  It is difficult to maintain any longer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20 23:05:39 +09:00
Masahiro Yamada
213fcabdfd clk: uniphier: fix unmet direct dependencies warning
Since commit f0776a5517 ("spl: dm: Kconfig: SPL_CLK depends on
SPL_DM"), the following warning is displayed:

  $ make uniphier_v8_defconfig
  warning: (ARCH_ZYNQ && ARCH_ZYNQMP && STM32F7 && CLK_UNIPHIER) selects
  SPL_CLK which has unmet direct dependencies (CLK && SPL_DM)

While I am here, I am removing the prompt to make it user-unconfigurable
option so that "select CLK_UNIPHIER" can be omitted.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20 23:05:39 +09:00
Anatolij Gustschin
f1a7ba1da5 Fix 'notes' typos
s/notes/nodes

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-20 09:54:34 -04:00
Andy Shevchenko
e94c1268f2 env: Sort selection of default choices
It would be easier to catch out which platform is using which default.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-20 09:54:33 -04:00
Heiko Schocher
79c85f7115 arm, at91: fix taurus board
since commit: b529993e02 "spl: add hierarchical defaults for SPL_LDSCRIPT"

taurus board stopped working. Use the ldscript from
arch/arm/cpu/u-boot-spl.lds (as before this patch) fixed it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-20 09:54:33 -04:00
Thomas Petazzoni
c1ee8936bf common/board_f.c: remove CONFIG_SYS_GENERIC_GLOBAL_DATA
CONFIG_SYS_GENERIC_GLOBAL_DATA is no longer used by any board or
platform, so support for it can be dropped.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-20 09:54:32 -04:00
Peter Griffin
fb53e7eb60 ARM: hisilicon: hikey: Fix eMMC with latest ATF & U-Boot
ATF can leave the MMC IP in a state where U-Boot mmc driver
can't enumerate the eMMC.

This patch provides a mmc0_reset_clk() function like we
already so do sd card controller which resets the IP
when entering U-Boot.

With this patch applied eMMC partitions are successfully
enumerated again.

=> mmc dev 0
switch to partitions #0, OK
mmc0(part 0) is current device
=> mmc part

Partition Map for MMC device 0  --   Partition Type: EFI

Part	Start LBA	End LBA		Name
	Attributes
	Type GUID
	Partition GUID
  1	0x00000800	0x00000fff	"vrl"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	guid:	496847ab-56a1-4cd5-a1ad-47f4acf055c9
  2	0x00001000	0x000017ff	"vrl_backup"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	guid:	61a36fc1-8efb-4899-84d8-b61642efa723
  3	0x00001800	0x00001fff	"mcuimage"
<snip>

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2017-08-20 09:54:31 -04:00
Tom Rini
42a9f147d8 fs/fat: Correct blk_dread() return value check
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20 09:54:31 -04:00
Tom Rini
9585dd3fff spl: spl_mmc.c Correct blk_dread() return value check
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20 09:54:30 -04:00
Tom Rini
d03618d5cb cmd/read.c: Fix checking blk_dread return value
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Reported-by: Coverity (CID: 166335)
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20 09:54:30 -04:00
Tom Rini
54f1792c8d mtdparts: Fix various issues reported by Coverity
Now that sandbox is building cmd/mtdparts.c Coverity has looked at the
code and found a number of issues.  In index_partitions() it is possible
that part will be NULL, so re-work the checks and debug statements to
take this into account.  We have a number of string buffers that we
print to in the exact size of, and use string functions on, so we need
to ensure they are large enough to be NULL terminated.  In
device_parse() it is not possible for num_partitions to be 0 (we would
have hit a different error first) so remove logically dead code.
Finally, in parse_mtdparts() if we have an error we need to free the
memory allocated to dev.

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Coverity (CID: 166334, 166333, 166332, 166329, 166328)
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20 09:54:29 -04:00
Tom Rini
78eda89e9a hash: Compile only hardware or software versions of SHA algorithms
Commit 089df18bfe ("lib: move hash CONFIG options to Kconfig") moved
CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and
CONFIG_SHA_PROG_HW_ACCEL config options to Kconfig. So in the case of
SPL, CONFIG_SPL_HASH_SUPPORT enables CONFIG_SHA1 and CONFIG_SHA256 which
enables SHA SW library by default.  But in the case of platforms with
SHA HW library support, SHA SW library becomes redundant and increases
size of SPL by approx 18K.  Rework the code so that we have named
members and only have either software or hardware versions of the
algorithm, depending on the relevant config options.  Update the comment
around hash_algo to reflect this as well.

Reported-by: Sumit Garg <sumit.garg@nxp.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sumit Garg <sumit.garg@nxp.com>
2017-08-20 09:53:13 -04:00
Clément Bœsch
3809e30273 Makefile: honor PYTHON configuration properly
On some systems `python` is `python3` (for instance, Archlinux). The
`PYTHON` variable can be used to point to `python2` to have a successful
build.

The use of `PYTHON` is currently limited in the Makefile and needs to be
extended in other places:

First, pylibfdt is required to be a Python 2 binding (binman imports
pylibfdt and is only compatible Python 2), so its setup.py needs to be
called accordingly. An alternative would be to change the libfdt
setup.py shebang to python2, but the binding is actually portable. Also,
it would break on system where there is no such thing as `python2`.

Secondly, the libfdt import checks need to be done against Python 2 as
well since the Python 2 compiled modules (in this case _libdft.so) can
not be imported from Python 3.

Note on the libfdt imports: "@if ! PYTHONPATH=tools $(PYTHON) -c 'import
libfdt'; then..." is probably simpler than the currently sub-optimal
pipe.
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
2017-08-20 09:53:13 -04:00
Tom Rini
2629a21e20 Merge git://git.denx.de/u-boot-video 2017-08-19 22:11:05 -04:00
xypron.glpk@gmx.de
021414a332 lcd: avoid possible NULL dereference
Do not dereference bmp before the check if it is NULL.

The problem was indicated by cppcheck.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-19 20:42:20 +02:00
Tom Rini
5619295995 EFI Fixes for 2017.09:
- Fix GOP w/o display
   - Fix LocateHandle
   - Fix exit return value truncation
   - Fix missing EFIAPI in efi_locate_handle (for x86)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZlq5xAAoJECszeR4D/txgM9MP/3lZ8gUWCb5iNnIUhTwNyTPG
 T2tCvoI90YkNTY67L/J5JtDR8BaW4D+yJTeR+tIxB7BMMeF/UJ+kLPdncNyF082b
 9h6Ht5m47osSuBji0v8G2/wjkzNAIonXdoVFQxKQ9t3WgjvyWlp4sK6wrmGyukQJ
 Pb6cqEo/BH3u9/+xPZvyv9eZErJukfs4GHawzP1olH50mF8yVGUbJT2ctKhk5m3b
 F5gdp0pPsebISjWhoq8CKxQitDH6WG6IsLJTu0htEGjP5qPtXSIQhKMj4zIBSH9U
 paiO0k7DeQyfiKqeenk9zY+X33T/JlVPmLco4osP70pg6bzYdnjPGAuwpEhiL1cN
 QZcNb+liZceik5iWO1bjAoUd4rOKD4snl6kg6qLUiYCNF2oSo5h8Em3oyHiiw6Dw
 ohX840jdtnl3Xuuo0jCtHZoOH5glWCO+HTZTPhdE0K/9s79yPy59v9RqBNRM5LB+
 dH7Zg/50AtebOLqqd35YQdSaV1im80EbdxLaV1yJsMtQw2xucVHJC099oyTDXcSg
 0pzBDYsQia/hDDvum8TVHheHfz0cJi9u+VrjgauTK2GmcYNr1hxSyM0pSFveB3C3
 C9qP/20yI3ZMuECC67SIfYK5E03bI2gHH8/k+fQEqxYgqqr50I7aWYGw2nFZTecC
 sdWxgTolQsjn/xlfFBWY
 =wyGe
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

EFI Fixes for 2017.09:
  - Fix GOP w/o display
  - Fix LocateHandle
  - Fix exit return value truncation
  - Fix missing EFIAPI in efi_locate_handle (for x86)
2017-08-18 18:24:58 -04:00
Tom Rini
1fdafb2e3d Merge branch 'master' of git://git.denx.de/u-boot-mmc 2017-08-18 18:24:36 -04:00
Tom Rini
a6dd10c70b Merge branch 'master' of git://git.denx.de/u-boot-coldfire 2017-08-18 18:24:08 -04:00
Tom Rini
804f1d9938 Merge branch 'master' of git://git.denx.de/u-boot-rockchip 2017-08-18 18:23:58 -04:00
Kever Yang
957b4ee3f3 rockchip: rk322x: pinctrl: fix IO MASK error on sdcard pin
Fix the IOMUX setting for SDcard CMD pin at the same time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18 18:00:46 +02:00
Kever Yang
a634236b8d rockchip: rk322x: pinctrl: using compatible name same with dts
The dts from kernel is using rk3228-pinctrl as compatible name,
need to sync with it to make the driver work.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18 18:00:29 +02:00
Kever Yang
a80b3b0378 rockchip: rk322x: update MACRO for mmc clksel reg
The description for eMMC/SDIO/SDMMC src is not correct,
update the CRU_CLKSEL11_CON value definition according to TRM.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18 17:52:47 +02:00
Kever Yang
44c5ba557b rockchip: rk322x: update dram bank size
The DRAM start address is not 0, so need to update the last bank size
as:
DRAM start addr + DRAM_SIZE - last bank start addr

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-18 16:55:25 +02:00
Philipp Tomsich
a299a4879e rockchip: rk3399: spl: remove unused header inclusion
fdtdec.h is included, but not used in rk3399-board-spl.c: remove the
'#include'-statement.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18 16:55:15 +02:00