Commit graph

180 commits

Author SHA1 Message Date
Masahiro Yamada
29d63a59ea ARM: uniphier: add clock/reset settings for xHCI of ProXstream2
Deassert resets and enable clock signals of xHCI blocks if the
corresponding CONFIG is enabled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:44:55 +09:00
Masahiro Yamada
be44a4679f ARM: uniphier: add PH1-LD21 board data
This has the same silicon die as PH1-LD20, but includes DRAM chips
in its package.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:24:58 +09:00
Masahiro Yamada
a74c28a0f2 ARM: uniphier: introduce flags to uniphier_board_data structure
I need to add more board attributes, so the "flags" member will be
handier than separate boolean ones.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:24:55 +09:00
Masahiro Yamada
4bab70a77d ARM: uniphier: rename outer-cache register macros
Sync register macros with Linux code.  This will be helpful to
develop the counterpart of Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:17:15 +09:00
Masahiro Yamada
ebab100a98 ARM: uniphier: clear notification flag before L2 operation
Clear the flag immediately before cache operation to not depend on
the previous state.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:13:11 +09:00
Masahiro Yamada
4e3d84066e ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()
This does not have much impact on behavior, but makes code look more
more like Linux.  The use of devm_ioremap() often helps to delete
.remove callbacks entirely.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:13:10 +09:00
Masahiro Yamada
b7c4d25d26 ARM: uniphier: select CONFIG_ARMV8_SPIN_TABLE
This is needed when booting Linux without ARM Trusted Firmware.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-23 23:24:47 +09:00
York Sun
cd4b0c5fea armv8: mmu: Add support of non-identical mapping
Introduce virtual and physical addresses in the mapping table. This change
have no impact on existing boards because they all use idential mapping.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-07-15 09:01:43 -07:00
Masahiro Yamada
e64a6b1141 ARM: uniphier: add external IRQ setup code
I will carry this work-around until it is cared in the kernel.
This looks up the AIDET node and sets up a register to handle
active low interrupt signals.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-02 05:44:30 +09:00
Masahiro Yamada
4cb9399e9b ARM: uniphier: fix typo "talbe"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-30 23:49:26 +09:00
Marek Vasut
2b1cdafa9f common: Pass the boot device into spl_boot_mode()
The SPL code already knows which boot device it calls the spl_boot_mode()
on, so pass that information into the function. This allows the code of
spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets
board_boot_order() correctly alter the behavior of the boot process.

The later one is important, since in certain cases, it is desired that
spl_boot_device() return value be overriden using board_boot_order().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[add newly introduced zynq variant]
Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26 20:17:22 +02:00
Masahiro Yamada
51ea5a060d ARM: uniphier: reserve memory for DRAM PHY training on PH1-LD20
The DRAM PHY layer on PH1-LD20 is able to calibrate PHY parameters
periodically.  This compensates for the voltage and temperature
deviation and improves the PHY parameter adjustment.  Instead, it
requires 64 byte scratch memory in each DRAM channel for the dynamic
training.  The memory regions must be reserved in DT before jumping
to the kernel.

The scratch area can be anywhere in each DRAM channel, but the DRAM
init code in SPL currently assigns it at the end of each channel.
So, it makes sense to reserve the regions on run-time by U-Boot
instead of statically embedding it in the DT in Linux.  Anyway,
a boot-loader should know much more about memory initialization
than the kernel.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-20 07:15:33 +09:00
Masahiro Yamada
18c1198667 ARM: uniphier: move CONFIG_ARMV8_MULTIENTRY to Kconfig
I just did not notice this option had an entry in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-20 07:15:28 +09:00
Masahiro Yamada
48efc8a25b ARM: uniphier: introduce CONFIG_ARM_UNIPHIER_{32, 64}BIT
This will make it easier to select config options specific to
particular ARM processor generation.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-20 07:15:22 +09:00
Masahiro Yamada
9c2f9b2da6 ARM: uniphier: insert dsb barrier to ensure visibility of store
I noticed secondary CPUs sometimes fail to wake up, and the root
cause is that the sev instruction wakes up slave CPUs before the
preceding the register write is observed by them.

The read-back of the accessed register does not guarantee the order.
In order to ensure the order between the register write and the sev
instruction, a dsb instruction should be executed prior to the sev.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09 08:19:13 +09:00
Masahiro Yamada
4565a74d56 ARM: uniphier: do not overwrite fdt_file environment
This code auto-detects the best-match FDT file name, but it should
respect the user's choice if "fdt_file" environment is found in a
saved set of environments.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09 08:18:34 +09:00
Masahiro Yamada
80630dad9d ARM: uniphier: check return code of setenv()
Because setenv() may fail, it is better to check its return code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09 08:18:25 +09:00
Masahiro Yamada
7760b49fa7 ARM: uniphier: fix boot mode for PH1-LD11
This function is shared between PH1-LD11 and PH1-LD20.  The difference
is the boot-mode latch for the USB boot mode.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09 08:17:59 +09:00
Masahiro Yamada
adb3928f15 ARM: uniphier: support eMMC boot for PH1-LD11 and PH1-LD20
The Boot ROM on PH1-LD11/LD20 exports built-in APIs to load images
from an eMMC device.  They are useful to reduce the memory footprint
of SPL, rather than compiling the whole MMC framework.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09 08:17:49 +09:00
Masahiro Yamada
667dbcd01d ARM: uniphier: add PH1-LD11 SoC support
This is a low-cost ARMv8 SoC from Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:37:13 +09:00
Masahiro Yamada
7381db86a9 ARM: uniphier: rename UMC register macros of PH1-LD20
Correct some register names.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:36:58 +09:00
Masahiro Yamada
0586e22783 ARM: uniphier: rename umc-ld20-regs.h to umc64-regs.h
This header will be shared between PH1-LD11 and PH1-LD20
(and hopefully new ARMv8 SoCs developed in the future),
so umc64-regs.h would be a better fit.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:35:26 +09:00
Masahiro Yamada
6a555b214b ARM: uniphier: clean up boot mode tables
Tidy up alignment of open parentheses.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:35:26 +09:00
Masahiro Yamada
0bd20207ab ARM: uniphier: disable cache in SPL of PH1-LD20
The Boot ROM has enabled D-cache and MMU setting DDR memory area
as Normal Memory in its page table.  Disable D-cache and MMU
before jumping to U-Boot proper.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:35:26 +09:00
Robert P. J. Day
1cc0a9f496 Fix various typos, scattered over the code.
Spelling corrections for (among other things):

* environment
* override
* variable
* ftd (should be "fdt", for flattened device tree)
* embedded
* FTDI
* emulation
* controller
2016-05-05 21:39:26 -04:00
Masahiro Yamada
bef4b024e9 ARM: uniphier: move pin-mux code into pin_init function
The code in uniphier_sld3_sbc_init() is pin-muxing, so it would
be a better fit in uniphier_sld3_early_pin_init().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-01 01:13:45 +09:00
Masahiro Yamada
5eb4150e84 ARM: uniphier: allow to use System Bus for ROM boot mode of PH1-LD20
The System Bus is not available by default on the ROM boot mode of
PH1-LD20.  To use devices connected to the System Bus, such as the
Micro Support Card, it is necessary to set up pin-muxing and some
System Bus Controller register.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-01 01:09:18 +09:00
Masahiro Yamada
1dce5eb9de ARM: uniphier: enable Peripherl clock to use UART in SPL
This is needed to use UART on SPL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-01 01:09:17 +09:00
Masahiro Yamada
68340966e6 ARM: uniphier: fix boot mode table of PH1-LD20
PH1-LD20 does not have the dedicated boot swap select latch.
Instead, it is controlled from the boot mode select.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-01 01:09:11 +09:00
Masahiro Yamada
9d0c2ceb35 ARM: uniphier: add PH1-LD20 SoC support
This is the first ARMv8 SoC from Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-24 09:54:08 +09:00
Masahiro Yamada
881aa5a79a ARM: uniphier: rework uniphier_set_fdt_file()
The current table look-up for the DTB file name turned out bothersome
in terms of maintainability; I ended up adding a new entry every time
a new board is supported.

There is a common pattern between the DT compatible string and the
corresponding file name; drop the vendor prefix "socionext," and
prefix it with "uniphier-" and suffix it with ".dtb".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-24 09:54:03 +09:00
Masahiro Yamada
d90b9745ea ARM: uniphier: carry on booting for Unknown boot mode
No need to stop booting U-Boot even if boot mode is unknown.
Setting the "bootmode" environment is only useful for booting
Linux Kernel.  Anyway, U-Boot has already booted by this point.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-24 09:53:57 +09:00
Masahiro Yamada
612ccd9001 ARM: uniphier: add sg_set_iectrl_range()
For PH1-LD20 or later, per-pin input-enable control is supported,
that is, we need to set-up IECTRL registers for a group of pins.
This helper function will be useful for a bunch of register settings.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-24 09:53:57 +09:00
Masahiro Yamada
7b3a032dd3 ARM: uniphier: avoid unaligned access to DT on 64bit SoC
Because DT properties are 4-byte aligned, the pointer access
*(fdt64_t *) in this code causes unaligned access.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-24 09:53:55 +09:00
Hans de Goede
c09d29057a arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
v7_maint_dcache_all() does not work reliable when build with gcc6,
see: https://bugzilla.redhat.com/show_bug.cgi?id=1318788

While debugging this I learned that v7_maint_dcache_all() is unreliable
when build with gcc5 too when it is marked as noinline.

This commit fixes the reliability issues by replacing the C-code with
the ready to use asm implementation from the kernel.

Given that this code when written as C-code clearly is quite fragile
(also see the existing comments about the C-code being the way it is
 to get optimal assembly) and that we have a proven asm alternative,
I believe that this is the best solution.

Note that we actually already had a copy of the kernel's
v7_flush_dcache_all() before this commit in
arch/arm/mach-uniphier/arm32/lowlevel_init.S.

This commit moves that code arch/arm/cpu/armv7/cache_v7_asm.S, renames
it to __v7_flush_dcache_all(), and adds a v7_flush_dcache_all() wrapper
which saves / restores the clobbered registers for use from C-code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-11 20:48:26 -04:00
Masahiro Yamada
6797630685 cosmetic: Fix typos "privide"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:59:47 +09:00
Masahiro Yamada
5b66006646 ARM: uniphier: rename function names ph1_* to uniphier_*
Eliminate the "ph1"_ prefixes from function names because "uniphier_"
describes the SoC familiy better.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:59:47 +09:00
Masahiro Yamada
a75ecfc2a6 ARM: uniphier: add pin-mux settings for NAND, eMMC, SD of PH1-sLD3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:59:47 +09:00
Masahiro Yamada
ac2a1030e3 ARM: uniphier: adjust dram_init() and dram_init_banksize() for ARM64
Currently, these functions assume #address-cells and #size-cells are
both one.  Fix them to support 64bit DTB.

Also, I am fixing a buffer overrun bug while I am here.  The array
size of gd->bd->bd_dram is CONFIG_NR_DRAM_BANKS.  The number of
iteration in the loop should be limited by that CONFIG.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:59:47 +09:00
Masahiro Yamada
cbbc2d80fc ARM: uniphier: add NOR boot support
This allows to boot from NOR flash (or SRAM) with help of an external
loader (NOR-loader).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:41 +09:00
Masahiro Yamada
d5cf32977f ARM: uniphier: support Debug UART
For ARM32 architecture, CONFIG_DEBUG_LL is available for early
low-level debugging (and actually UniPhier 32bit SoCs use it), but
ARM64 architecture does not support it.  Instead, CONFIG_DEBUG_UART
is available as an architecture-independent debug facility.

This commit supports it on all the UniPhier SoCs (including the new
ARMv8 SoCs), which is very useful for new SoC bringups.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:41 +09:00
Masahiro Yamada
650aedbfc0 ARM: uniphier: add System Control register macros for ARMv8 SoCs
The System Control block moved to a completely different register
map for ARMv8 SoCs, so it cannot be shared with the ARM 32-bit ones.
Define register macros in a new header file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:22 +09:00
Masahiro Yamada
c8cc7213a5 ARM: uniphier: add sg_set_iectrl() function
This helper function would be useful for new SoCs with per-pin
input enable controlling, such as PH1-LD20, PH1-LD11, etc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:21 +09:00
Masahiro Yamada
f6c65bc2fa ARM: uniphier: enable DDR PHY parameter dump commands by default
These commands are not necessarily needed for usual operations
(they are useful in case of DDR memory trouble), but enabling them
by default would be nice in terms of the compilation test coverage.
They are small enough, so limited impact on the memory footprint.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:20 +09:00
Masahiro Yamada
36223f5de8 ARM: uniphier: add work-around to support Micro Support Card v3.6.10
Due to some hardware guy's awful work, this version is not compatible
with v3.6: the logic of BIT(0) of the reset logic is inverted! (and
v3.6.10 is horribly wrong in multiple ways), but this is what we have
to solve now.

The v3.6 expects 0x0000 set to the register for reset de-assertion,
while v3.6 does 0x0001.

This commit (ab)uses another bug of v3.6.10 to work around the issue.
The UniPhier System Bus is a 16-bit bus, which this support card is
connected to.  A 32-bit write to the bus (writel() function call) is
divided into two 16-bit write transactions, with LSB the first.  What
is amazing for v3.6.10 is that access to address 4N + 2 goes to 4N
(Jesus Christ!).

For clarification, things are like this:

    writel(0x00010000, MICRO_SUPPORT_CARD_RESET);

is done with two bus transactions as follows

    [1] write 0x0000 to address MICRO_SUPPORT_CARD
    [2] write 0x0001 to address MICRO_SUPPORT_CARD + 2

For v3.6, [1] is written to the register and [2] is correctly ignored
because there is nothing at the address MICRO_SUPPORT_CARD + 2.  This
is what we expect.

For v3.6.10, [1] is written to the reset register and then [2] is
over-written to the same register due to the bus access bug.

For the latter, it produces a glitch signal to the BIT[0], so the
device state is lost due to the reset pulse.  This solution only
works for the start-up code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:19 +09:00
Masahiro Yamada
1b1f2319ca ARM: uniphier: drop ifdef in ddrphy-regs.h
The ifdef conditionals in header files prevent us from multi-SoC
support in a single U-Boot image.  Detect SoC specific parameters
run-time rather than define them statically with an ifdef in
ddrphy-regs.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:19 +09:00
Masahiro Yamada
5d0607c58c ARM: uniphier: refactor SBC init code
There is a bunch of duplication in the System Bus Controller init
code.  Roughly, there are two types in the SBC mode:  Adress/Data
Multiplex Mode and Save Pins Mode.  Consolidate per-SoC functions
into the two, plus per-SoC optional init code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:18 +09:00
Masahiro Yamada
ea65c98050 ARM: uniphier: drop PH1- prefix from CONFIG options and file names
The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too
long.  It would not hurt to drop "PH1_" because "UNIPHIER_" already
well specifies the SoC family.  Also, rename files for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:42:13 +09:00
Masahiro Yamada
5d07648662 ARM: uniphier: allow debug_ll_init() to do nothing for unknown SoCs
This function should just return for unknown SoCs rather than writing
unexpected values to registers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-09 01:11:15 +09:00
Masahiro Yamada
51244a6080 ARM: uniphier: fix build error when CONFIG_CMD_DDRMPHY_DUMP=y
The build fails if compiled with CONFIG_CMD_DDRMPHY_DUMP=y since commit
46abfcc99e ("ARM: uniphier: rework struct uniphier_board_data").

Fixes: 46abfcc99e ("ARM: uniphier: rework struct uniphier_board_data")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-09 01:10:47 +09:00