Commit graph

62619 commits

Author SHA1 Message Date
Patrick Delaunay
ba2c20ce7a stm32mp1: move stboard command in board/st/common directory
Move the ST command in board/st/common, as this command is only used
by ST board. Prepare the support in U-Boot of boards with STM32MP15x
SOC but not STMicroelectronics.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-17 13:58:27 +01:00
Marek Vasut
c3ab0fe6c1 stm32mp1: configs: Make all boot devices in distro boot conditional
Not all systems have all the boot devices enabled, e.g. not all systems
have MTD devices and thus do not enable UBI. Make all the boot devices
in the distro bootcmd conditional to avoid failures.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-17 11:44:42 +01:00
Marek Vasut
e71b9a64a2 ARM: stm32: Allow overriding setup_mac_address()
Let board code override setup_mac_address(), which is useful e.g. if the
board derives the MAC address from another source, like an I2C EEPROM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-17 11:44:42 +01:00
Thomas Hebb
541911f479 stm32mp: remove redundant SYS_TEXT_BASE prompt
The main prompt for this (defined in /Kconfig) is visible at all times,
which means there's no reason to have an additional, machine-specific
prompt to set the same option.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2020-01-17 11:44:42 +01:00
Tom Rini
d7bb6aceb2 Merge tag 'mmc-1-16-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- Cleanup of fsl_esdhc driver together with arch/defconfig change
- Add quirk for APP_CMD retry
2020-01-16 13:20:51 -05:00
Tom Rini
994bb86fc9 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Clearfog: Fix SD booting (Baruch)
- Misc updates to MMC handling in SPL to support booting from
  main data partition (vs hardware boot partition) on MVEBU (Baruch)
2020-01-16 12:52:07 -05:00
Tom Rini
92329e2413 Xilinx/FPGA changes for v2020.04
ARM64:
 - Add INIT_SPL_RELATIVE dependency
 
 SPL:
 - FIT image fix
 - Enable customization of bl2_plat_get_bl31_params()
 
 Pytest:
 - Add test for octal/hex conversions
 
 Microblaze:
 - Fix manual relocation for one SPI instance
 
 Nand:
 - Convert zynq/zynqmp drivers to DM
 
 Xilinx:
 - Enable boot script location via Kconfig
 - Support OF_SEPARATE in board FDT selection
 - Remove low level uart setup it is done later by code
 - Add support for DEVICE_TREE variable passing for SPL
 
 Zynq:
 - Enable jtag boot mode via distro boot
 - Removing unused baseaddresses from hardware.h
 - DT fixups
 
 ZynqMP:
 - Fix emmc boot sequence
 - Simplify spl logic around bss and board_init_r()
 - Support psu_post_config_data() calling
 - Tune mini-nand DTS
 - Fix psu wiring for a2197 boards
 - Add runtime MMC device boot order filling in spl
 - Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
 - Add support u-boot.its generation
 - Use single image configuration for all platforms
 - Enable PANIC_HANG via Kconfig
 - DT fixups
 - Firmware fixes
 - Add support for zcu208 and zcu1285
 
 Versal:
 - Fix emmc boot sequence
 - Enable board_late_init() by default
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXiAK2AAKCRDKSWXLKUoM
 IX3VAJ41GJXBwP7Z9hX9RFhsqOu0M+NdegCdFvMUaCQ1bSvgAMOnDL+JeB21+Qo=
 =qSbv
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.04

ARM64:
- Add INIT_SPL_RELATIVE dependency

SPL:
- FIT image fix
- Enable customization of bl2_plat_get_bl31_params()

Pytest:
- Add test for octal/hex conversions

Microblaze:
- Fix manual relocation for one SPI instance

Nand:
- Convert zynq/zynqmp drivers to DM

Xilinx:
- Enable boot script location via Kconfig
- Support OF_SEPARATE in board FDT selection
- Remove low level uart setup it is done later by code
- Add support for DEVICE_TREE variable passing for SPL

Zynq:
- Enable jtag boot mode via distro boot
- Removing unused baseaddresses from hardware.h
- DT fixups

ZynqMP:
- Fix emmc boot sequence
- Simplify spl logic around bss and board_init_r()
- Support psu_post_config_data() calling
- Tune mini-nand DTS
- Fix psu wiring for a2197 boards
- Add runtime MMC device boot order filling in spl
- Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
- Add support u-boot.its generation
- Use single image configuration for all platforms
- Enable PANIC_HANG via Kconfig
- DT fixups
- Firmware fixes
- Add support for zcu208 and zcu1285

Versal:
- Fix emmc boot sequence
- Enable board_late_init() by default
2020-01-16 09:45:40 -05:00
Tom Rini
f47704d4ae Merge branch '2020-01-15-master-imports'
- MediaTek improvements
- Some generic clk improvements
- A few assorted bugfixes
2020-01-16 09:40:09 -05:00
Sam Shih
7b2e07ad34 configs: mediatek: fix mt7623n bpir2 defconfig
This patch add CONFIG_TARGET_MT7623 into mt7623n_bpir2_defconfig
to fix the mt7623 compile error after building others mediatek target
platform

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
098c063765 arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file
This patch move u-boot properties to -u-boot.dtsi file.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
c7fbc62082 Add support for MT7622 reference board
This adds a general board file based on MT7622 SoCs from MediaTek.
This commit is adding the basic boot support for the MT7622 rfb.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-16 09:39:45 -05:00
Sam Shih
25273dbd57 mmc: add mmc and sd support for MT7622
This patch add mmc and sd support for Mediatek MT7622 SoCs

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
abb65f123c power: domain: add power domain support for MT7622
This patch add power domain support for Mediatek MT7622 SoCs

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
d8588ba55f clk: mediatek: fix clock-rate overflow problem
This patch fix clock-rate overflow problem in mediatek
clock driver common part.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
72ab603b20 clk: mediatek: add driver for MT7622
This patch add clock driver for MediaTek MT7622 SoC.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
cf400b63b4 pinctrl: mediatek: add support for different pinctrl
Due to the pinctrl hardware of MT7622 is difference from others
SoC which using the common part of mediatek pinctrl.
So we need to modify the common part of mediatek pinctrl.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
a430149c99 pinctrl: mediatek: add driver for MT7622
This patch add Pinctrl driver for MediaTek MT7622 SoC.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
ac57e2b013 ARM: MediaTek: Add support for MediaTek MT7622 SoC
Add support for MediaTek MT7622 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Chunfeng Yun
ce0069ed95 phy: phy-mtk-tphy: make ref clock optional
If make the ref clock optional, no need refer to fixed-clock when
the ref clock is always on or comes from oscillator directly.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Chunfeng Yun
3b6351a475 phy: phy-mtk-tphy: remove the check of -ENOSYS
No need check -ENOSYS anymore after add dummy_enable() for
fixed-clock.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Chunfeng Yun
6bf6d81c11 clk: fixed_rate: add dummy enable() function
This is used to avoid clk_enable() return -ENOSYS.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Chunfeng Yun
d646420e29 clk: add APIs to get (optional) clock by name without a device
Sometimes we may need get (optional) clock without a device,
that means use ofnode.
e.g. when the phy node has subnode, and there is no device created
for subnode, in this case, we need these new APIs to get subnode's
clock.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Chunfeng Yun
bd7c798605 clk: check valid clock by clk_valid()
Add valid check for clk->dev, it's useful when get optional
clock even when the clk point is valid, but its dev will be
NULL.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Chunfeng Yun
0f9b2b3ddf clk: fix error check for devm_clk_get_optional()
If skip all return error number, it may skip some real error cases,
so only skip the error when the clock is not provided in DTS

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Chunfeng Yun
5f82a940a0 clk: mediatek: mt7629: add support for ssusbsys
The SSUSB IP's clocks come from ssusbsys module on mt7629,
so add its driver

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
b9bf3cbfd6 ARM: MediaTek: add basic support for MT8512 boards
This adds a general board file based on MT8512 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8512 eMMC board.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
fb80eaa9d8 mmc: mtk-sd: fix hang when data read quickly
For CMD21 tuning data, the 128/64 bytes data may coming in very
short time, before msdc_start_data(), the read data has already
come, in this case, clear MSDC_INT will cause the interrupt disappear
and lead to the thread hang.

the solution is just clear all interrupts before command was sent.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
3b0397d48b mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs
This patch adds mmc support for MediaTek MT8512/MT8110 SoCs.
MT8512/MT8110 SoCs puts the tune register at top layer, so
need add new code to support it.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
51fcd56c0d pinctrl: mediatek: add driver for MT8512
Add Pinctrl driver for MediaTek MT8512 SoC.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
0670adb27a clk: mediatek: add configurable pcw_chg_reg/ibits/fmin to mtk_pll
Add configurable pcw_chg_reg/ibits/fmin to mtk_pll to support mt8512
2020-01-16 09:39:45 -05:00
mingming lee
f62168d3c3 clk: mediatek: add set_clr_upd mux type flow
Add new set_clr_upd mux type and related operation to
mtk common clock driver to support mt8512
2020-01-16 09:39:45 -05:00
mingming lee
c196110777 clk: mediatek: add driver support for MT8512
Add clock driver for MediaTek MT8512 SoC, include topckgen,
apmixedsys and infracfg support.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
953bb4c3ce ARM: MediaTek: Add support for MediaTek MT8512 SoC
Add support for MediaTek MT8512 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Protsenko
0c0859cf2d MAINTAINERS: Fix mail
Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change
it to his home mail instead.

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2020-01-16 09:39:45 -05:00
Alexandre Besnard
45e4968e74 cmd/blk_common: clarify no partition error message
When no partition table is found, users should be warned so.
Warning that no device is available in this case could be misleading,
especially as it is the same error when no device is selected.

Signed-off-by: Alexandre Besnard <alexandre.besnard@softathome.com>
2020-01-16 09:39:45 -05:00
Baruch Siach
e6a5a5c72b arm: mvebu: clearfog: update eMMC documentation
SPL now automatically selects the correct U-Boot image offset for both
eMMC and SD card. No need to tweak
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16 10:59:14 +01:00
Baruch Siach
14f14911f4 arm: mvebu: clearfog: set uboot image SD card offset
Armada 38x ROM skips the first SD card offset when loading SPL. This
affects the location of the main U-Boot image. SPL MMC code now supports
U-Boot image offset based on run-time detection of the boot partition.
Use this feature to make the same generated image support both SD card
and eMMC boot partition.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16 10:59:07 +01:00
Baruch Siach
e42afd8416 spl: mmc: support uboot image offset on main partition
On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC
hardware boot partitions. When there are no boot partitions (i.e. SD
card) the ROM skips the first sector that usually contains the (logical)
partition table. Since the generated .kwb image contains the main U-Boot
image in a fixed location (0x140 sectors by default), we end up with the
main U-Boot image in offset of 1 sector. The current workaround is to
manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to
compensate for that.

This patch uses the run-time detected boot partition to determine the
right offset of the main U-Boot partition. The generated .kwb image is
now compatible with both eMMC boot partition, and SD card main data
partition.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16 10:58:52 +01:00
Baruch Siach
c853fa721d configs: clearfog: enable SPL_DM_GPIO to fix boot from SD
SPL needs DM GPIO to read the SD card-detect signal. This complements
the fix in commit 70bae02f71 ("arm: mvebu: clearfog: fix boot from SD
card").

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16 10:58:46 +01:00
Joel Johnson
26632b7541 mmc: config help typo fix
Fix typo in description of MMC_QUIRKS config option.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
2020-01-16 13:21:01 +08:00
Joel Johnson
d4a5fa314d mmc: add additional quirk for APP_CMD retry
It was observed (on ClearFog Base) that sending MMC APP_CMD returned
an error on the first attempt. The issue appears to be timing related
since even inserting a puts() short debug entry before the execution
added sufficient delay to receive success on first attempt.

Follow the existing quirks pattern to retry if initial issuance
failed so as to not introduce any delay unless needed.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
2020-01-16 13:21:01 +08:00
Yangbo Lu
f1bce08426 Drop CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK usage
The eSDHC reference clocks should be provided by speed.c in arch/.
And we do not need CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK option to
select which clock to use. Because we can make the driver to select
the periperhal clock which is better (provides higher frequency)
automatically if its value is provided by speed.c.

This patch is to drop this option and make driver to select clock
automatically. Also fix peripheral clock calculation issue in
fsl_lsch2_speed.c/fsl_lsch3_speed.c.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:20:33 +08:00
Yangbo Lu
181c65b814 configs: ls1028a: use default SDHC clock divider value
The SDHC clock divider value for LS1028A should be default 2,
not 1.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:19:44 +08:00
Yangbo Lu
ac76dd0836 Add global variable sdhc_per_clk for arm/powerpc
The QorIQ eSDHC controller supports two reference clocks. They are
platform clock and periperhal clock. The global variable sdhc_clk
has already been used for platform clock.
This patch is to add another global variable sdhc_per_clk for
periperhal clock, which provides higher frequency and is required
to be used for SD UHS and eMMC HS200/HS400 speed modes.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:16:26 +08:00
Yangbo Lu
c2a8b4f879 powerpc/mpc85xx: drop eSDHC periperhal clock code
The below patch added eSDHC periperhal clock code initially.
2d9ca2c mmc: fsl_esdhc: Add peripheral clock support

The purpose was to fix up device tree properties "peripheral-frequency"
so that linux could get the periperhal clock by it.
However the implementation on both u-boot and linux was only
for a Freescale SDK release. The linux part implementation had never
been upstreamed. These code should not have been exist on u-boot
mainline.

Let's remove the powerpc part changes but keep the changes in
fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized
to support SD UHS and eMMC HS200/HS400 speed modes for current
Layerscape ARM platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:16:25 +08:00
Yangbo Lu
7fdcbac5d6 mmc: fsl_esdhc: drop useless fdt fixup
The fdt fixup for properties "peripheral-frequency" and "adapter-type"
was once for a Freescale SDK release. The properties haven't been existed
in linux mainline. Drop these useless code.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:16:24 +08:00
Yangbo Lu
6982315adf mmc: fsl_esdhc_imx: drop QorIQ eSDHC specific peripheral clock code
Drop QorIQ eSDHC specific peripheral clock code.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:16:23 +08:00
Heinrich Schuchardt
954ab3c7b7 test/py: use valid device tree in test_fit.py
The device tree compiler expects that a node with a unit-address has a reg
property.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15 19:50:31 -05:00
Sean Anderson
327bb3bc1e Add dependencies for MALLOC_F and OF_LIBFDT
Some features implicitly depended on MALLOC_F and OF_LIBFDT and would
fail at link-time if these features were not enabled.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15 19:50:31 -05:00
Sean Anderson
fbdbf77ede Include missing headers for asm-generic/sections.h
asm-generic/sections.h references ulong but does not include
linux/types.h

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15 19:50:31 -05:00