Commit graph

4494 commits

Author SHA1 Message Date
Simon Glass
d8c6fb8ced sandbox: Drop special case console code for sandbox
At present sandbox has a special case where it directly calls os_putc()
when it does not have a console yet.

Now that we have the pre-console buffer enabled we can drop this. Any
early characters will be buffered and output later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-11 10:08:20 -06:00
Simon Glass
d63b5b4fbb sandbox: Enable more console options
Enable the pre-console buffer, displaying the model and post-relocation
console announce on sandbox. Also add a model name to the device tree.
This allows testing of these features.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-11 10:08:20 -06:00
Simon Glass
4e6bafa568 console: Use map_sysmem() for the pre-relocation console
At present this feature casts the address to a pointer. Use the
map_sysmem() function so that it will work correctly on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-11 10:08:19 -06:00
Simon Glass
b0895384be Allow displaying the U-Boot banner on a video display
At present the U-Boot banner is only displayed on the serial console. If
this is not visible to the user, the banner does not show. Some devices
have a video display which can usefully display this information.

Add a banner which is printed after relocation only on non-serial devices
if CONFIG_DISPLAY_BOARDINFO_LATE is defined.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-11 10:08:19 -06:00
Simon Glass
8eab1a58dd dm: scsi: Document and rename the scsi_scan() parameter
The 'mode' parameter is actually a flag to determine whether to display
a list of devices found during the scan. Rename it to reflect this, add a
function comment and adjust callers to use a boolean.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Simon Glass
b9560ad649 dm: scsi: Drop the ccb typedef
We should not be using typedefs in U-Boot and 'ccb' is a pretty short
name. It is also used with variables. Drop the typedef and use 'struct'
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Simon Glass
0fcd48fe00 scsi: Move drivers into new drivers/scsi directory
At present we have the SCSI drivers in the drivers/block and common/
directories. It is better to split them out into their own place. Use
drivers/scsi which is what Linux does.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Simon Glass
f2105c6182 sata: Move drivers into new drivers/ata directory
At present we have the SATA and PATA drivers mixed up in the drivers/block
directory. It is better to split them out into their own place. Use
drivers/ata which is what Linux does.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Simon Glass
10e40d54b3 Kconfig: Add CONFIG_SATA to enable SATA
At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Simon Glass
a6fb185c70 scsi: Drop scsi_print_error()
This function is only defined by one driver and is empty. Move it into
the SCSI implementation itself. We could remove it, but it should be
useful for debugging.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Simon Glass
b8beb6b463 scsi: Drop sym53c8xx driver
This driver is for a PowerPC board that will likely be removed soon.
Rather than converting it to driver model, drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Cooper Jr., Franklin
af9e6ad4ab board_f: Add new function to allow runtime DTB selection
Runtime U-boot dtb selection is generally a two step process. First step
is to simply use an initial generic dtb. The second step is to select
the dtb and perhaps execute additional code ones U-boot knows what board
it is running on. Embedded_dtb_select handles the second step by allowing
board specific code to run and perform what ever necessary configuration
that is needed.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10 14:25:54 -04:00
Cooper Jr., Franklin
92926bc80c boot_fit: Create helper functions that can be used to select DTB out of FIT
Some platforms may append a FIT image to the U-boot image. This function
aids in parsing the FIT image and selecting the correct DTB at runtime.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10 14:25:50 -04:00
Cooper Jr., Franklin
3863f840fa spl: fit: Break out some functions into a common file
Some of the functions within spl_fit will be used for non spl purposes.
Instead of duplicating functions simply break the functions to be reused
into its own file.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Only add the new define to image.h, otherwise we see breakage
due to massive include leakage into host tools in some cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-10 14:24:39 -04:00
Andy Shevchenko
daab59ac05 avr32: Retire AVR32 for good
AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06 16:17:19 -04:00
Ladislav Michl
ffc282e199 spl: Make UBI fastmap support Kconfig selectable
Fastmap was always enabled in ubispl, make it selectable by
CONFIG_MTD_UBI_FASTMAP.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Heiko Schocher <hs@denx.de>
2017-07-06 13:09:37 -04:00
Heiko Schocher
98f705c9ce powerpc: remove 4xx support
There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-07-03 17:35:28 -04:00
Heiko Schocher
064b55cfcb powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x
There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16 10:14:55 -04:00
Lothar Waßmann
53207bfd70 board_f: fix calculation of reloc_off
relocate_code() calculates the relocation offset wrt. the symbol
__image_copy_start which happens to have the same value as
CONFIG_TEXT_BASE on most systems.
When creating an i.MX boot image with an integrated IVT it is
convenient to have CONFIG_TEXT_BASE point to the start of the IVT
that is prepended to the actual code. Thus CONFIG_TEXT_BASE will
differ from __image_copy_start, while the calculation
'gd->relocaddr - __image_copy_start' still gives the right relocation
offset.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
2017-06-12 08:38:41 -04:00
Simon Glass
baa7d345fb board_f: Use IS_ENABLED instead of #ifdef in initf_bootstage()
The current implementation makes it look like the 'if (from_spl)' part is
dead code because these features are not enabled for sandbox. We could
enable it for sandbox_spl, but this is not done yet (it requires sharing
memory between SPL and U-Boot proper which is in fact supported).

It is probably nicer to avoid #ifdef anyway. Change it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Coverity (CID: 163244)
Fixes: 824bb1b (bootstage: Support SPL)
2017-06-12 08:38:11 -04:00
Simon Glass
66a1b30d14 edid: Use sizeof() in cea_is_hdmi_vsdb_present()
We should not use an open-coded value here. Use sizeof() instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Coverity (CID: 163252)
Fixes: 43c6bdd0 (edid: Add HDMI flag to timing info)
2017-06-12 08:38:06 -04:00
Heiko Schocher
5025897774 powerpc, 5xx: remove support for 5xx
There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12 08:38:05 -04:00
Heiko Schocher
2eb48ff7a2 powerpc, 8260: remove support for mpc8260
There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12 08:38:02 -04:00
Heiko Schocher
5b8e76c35e powerpc, 8xx: remove support for 8xx
There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12 08:37:55 -04:00
Tom Rini
d2e1ee686a Merge branch 'master' of git://git.denx.de/u-boot-video 2017-06-10 09:48:09 -04:00
Tom Rini
75fd49c836 Merge branch 'master' of git://git.denx.de/u-boot-mmc 2017-06-10 09:47:57 -04:00
Vikas Manocha
c6d9e9dbc3 SPL: Add XIP booting support
Enable support for XIP (execute in place) of U-Boot or kernel image. There is
no need to copy image from flash to ram if flash supports execute in place.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-06-09 11:23:59 -04:00
Jernej Skrabec
bdc906dba9 edid: Fix gcc 7.1 warning
This commit fixes the warning produced by gcc 7.1.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09 15:29:59 +02:00
Simon Glass
01b73fe630 dm: mmc: Ensure that block device is probed
Make sure that we probe the block device before using it when reading
the environment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-09 20:25:16 +09:00
Vikas Manocha
6bcdd66d1c spl: armv7m: to keep ARM v7M in thumb mode before booting next image
On ARM v7M, the processor will return to ARM mode when executing blx
instruction with bit 0 of the address == 0. Always set it to 1 to stay in thumb
mode.

At present, it is applied only for raw U-Boot. This patch moves it to just
before booting next image. This way armv7m will be in thumb mode for any image
like raw or image with header like zImage or standard U-Boot.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-08 21:00:27 -04:00
Tom Rini
b9eaeae19e Merge git://git.denx.de/u-boot-usb 2017-06-05 21:05:51 -04:00
Pantelis Antoniou
4e33316f65 malloc: Turn on DEBUG when enabling unit tests
Unit tests require mallinfo which in turn requires DEBUG on
dlmalloc to be enabled.

The dependancy on CONFIG_SANDBOX is wrong.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:11 -04:00
Tom Rini
226498b8f8 common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards
Much of the entries here simply depend on SPL (or TPL).  Instead of this
redundancy use if SPL / if TPL to guard the rest of the choices and only
show them when we have the relevant option enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:09 -04:00
Simon Glass
a132f77088 bootstage: Record time taken to set up the live device tree
This time is interesting as a comparision with the flat device tree time.
Add it to the record.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:09 -04:00
Simon Glass
824bb1b453 bootstage: Support SPL
At present bootstage only supports U-Boot proper. But SPL can also consume
boot time so it is useful to have the record start there.

Add bootstage support to SPL. Also support stashing the timing information
when SPL finishes so that it can be picked up and reported by U-Boot
proper. This provides a full boot time record, excluding only the time
taken by the boot ROM.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:08 -04:00
Simon Glass
9d2542d062 bootstage: Adjust to use const * where possible
There are a few places that should use const *, such as
bootstage_unstash(). Update these to make it clearer when parameters are
changed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:08 -04:00
Simon Glass
e003310a76 bootstage: Tidy up error return values
We should return a proper error number instead of just -1. This helps the
caller to determine what when wrong. Update a few functions to fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:08 -04:00
Simon Glass
63c5bf48d5 bootstage: Record the time taken to set up driver model
Driver model is set up ones before relocation and once after. Record the
time taken in each case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:07 -04:00
Simon Glass
5ac44a5543 bootstage: Init as early as possible
At present we don't allow use of bootstage before driver model is running.
This means we cannot time the init of driver model itself.

Now that bootstage requires its own board-specific timer, we can move its
init to earlier in the sequence, both before and after relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:07 -04:00
Simon Glass
25e7dc6a6a bootstage: Support relocating boostage data
Some boards cannot access pre-relocation data after relocation. Reserve
space for this and copy it during preparation for relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:06 -04:00
Simon Glass
ff00226e0b bootstage: Use debug() for stashing messages
We don't normally want to see these messages. Change them to debug-only.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:06 -04:00
Simon Glass
c91001f608 bootstage: Show records with a zero time
We can now use the record count to determine whether a record is valid or
not. Drop the test for a zero time.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:06 -04:00
Simon Glass
03ecac3149 bootstage: Use rec_count as the array index
At present bootstage has a large array with all possible bootstage IDs
recorded. It adds times to the array element indexed by the ID. This is
inefficient because many IDs are not used during boot. We can save space
by only recording those IDs which actually have timestamps.

Update the array to use a record count, which increments with each
addition of a new timestamp. This takes longer to record a time, since it
may involve an array search. Such a search may be particularly expensive
before relocation when the CPU is running slowly or the cache is off. But
at that stage there should be very few records.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:05 -04:00
Simon Glass
cbcd6970ad bootstage: Fix up code style and comments
There are several code style and comment nits. Fix them and also remove
the comment about passing bootstage to the kernel being TBD. This is
already supported.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:05 -04:00
Simon Glass
b383d6c05e bootstage: Convert to use malloc()
At present bootstage uses the data section of the image to store its
information. There are a few problems with this:

- It does not work on all boards (e.g. those which run from flash before
relocation)
- Allocated strings still point back to the pre-relocation data after
relocation

Now that U-Boot has a pre-relocation malloc() we can use this instead,
with a pointer to the data in global_data. Update bootstage to do this and
set up an init routine to allocate the memory.

Now that we have a real init function, we can drop the fake 'reset' record
and add a normal one instead.

Note that part of the problem with allocated strings remains. They are
reallocated but this will only work where pre-relocation memory is
accessible after relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:04 -04:00
Simon Glass
5a0e275cbb bootstage: Change CONFIG_BOOTSTAGE_USER_COUNT to an int
There is no good read to make this hex, and integer is more natural for
this type of setting. Update it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:04 -04:00
Simon Glass
c87dc38d8f bootstage: Require timer_get_boot_us() to be defined
At present we provide a default version of this function for use by
bootstage. However it uses the system timer and therefore likely requires
driver model. This makes it impossible to time driver-model init.

Drop the function and require boards to provide their own. Add a sandbox
version also. There is a default implememtation in lib/time.c for boards
which use CONFIG_SYS_TIMER_COUNTER.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:04 -04:00
Simon Glass
b885d02e2c arm: Remove include files from common.h
With a small tweak we can avoid including these files for all boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 11:02:38 -04:00
Simon Glass
12d738ae4c api: Add a header for api_init()
Put this in its own header instead of using common.h.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:29 -04:00
Sekhar Nori
eedfb89e61 fs: fat: add kbuild configuration support
Add Kconfig symbols for various configurations
supported by FAT filesystem support code.

CONFIG_SUPPORT_VFAT has been left out since its
force enabled in include/fat.h and probably
should get removed at some point.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[trini: add select FS_FAT for CMD_FAT and SPL_FAT_SUPPORT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-03 17:55:16 -04:00
Sam Protsenko
efeccfe7f3 fastboot: Add support for flashing zImage
This patch adds support for flashing zImage to the Android boot
partition on eMMC.

Usage:

    $ fastboot flash zImage <path_to_zImage>

It's based on [1].

[1] http://omapzoom.org/?p=repo/u-boot.git;a=commit;h=3393b908c1e848bba3706612cbe50aa8970720b3

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-06-03 19:08:31 +02:00
Simon Glass
eed36609b5 fdt: Rename a few functions in fdt_support
These two functions have an of_ prefix which conflicts with naming used
in of_addr. Rename them:

   fdt_read_number
   fdt_support_bus_default_count_cells

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:11 -06:00
Simon Glass
ec002119cf fdt: Update fdt_get_base_address() to use const
This function does not change the device tree so adjust it to use const
for this parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:07 -06:00
Simon Glass
3af86a4e23 dm: Build a live tree after relocation
If enabled, build a live device tree after relocation. This can then be
used by driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:06 -06:00
Simon Glass
e7017a3c7d dm: mmc: Don't re-init when accessing environment
With driver model MMC is probed automatically when needed. We should not
re-init MMC each time.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:04 -06:00
Simon Glass
9d922450aa dm: Use dm.h header when driver mode is used
This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 06:57:52 -06:00
Daniel Thompson
221a949eb6 Kconfig: Finish migration of hashing commands
Currently these (board agnostic) commands cannot be selected using
menuconfig and friends. Fix this the obvious way.  As part of this,
don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v'
and "we have a hashing command" as this makes the Kconfig logic odd.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[trini: Re-apply, add imply for a few cases, run moveconfig.py, also
        migrate CRC32_VERIFY]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-31 19:38:14 -04:00
Philipp Tomsich
f8b8a55463 env_mmc: configure environment offsets via device tree
This introduces the ability to override the environment offets from the
device tree by setting the following nodes in '/config':
	'u-boot,mmc-env-offset' - overrides CONFIG_ENV_OFFSET
	'u-boot,mmc-env-offset-redundant'
				- overrides CONFIG_ENV_OFFSET_REDUND

To keep with the previous logic, the CONFIG_* defines still need to
be available and the statically defined values become the defaults,
when the corresponding properties are not set in the device-tree.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-29 17:28:52 +09:00
Tom Rini
711391131c Merge git://git.denx.de/u-boot-sunxi
trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:20:28 +00:00
Simon Glass
fc843a02ac Kconfig: Add a CONFIG_IDE option
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22 12:45:27 -04:00
Simon Glass
d70f919e49 Kconfig: Add CONFIG_HASH to enable hashing API
At present CONFIG_CMD_HASH enables the 'hash' command which also brings
in the hashing API. Some boards may wish to enable the API without the
command. Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-22 12:38:22 -04:00
Tom Rini
089df18bfe lib: move hash CONFIG options to Kconfig
Commit 94e3c8c4fd ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it.  Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool.  In many cases we can select
these because they are required to implement other drivers.  We also
correct how we include the various hashing algorithms in SPL.

This commit was generated as follows (after Kconfig additions):

[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL

Note:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.

Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Naveen Burmi <NaveenBurmi@freescale.com>
Cc: Po Liu <po.liu@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Chander Kashyap <k.chander@samsung.com>
Cc: Steve Rae <steve.rae@raedomain.com>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Feng Li <feng.li_2@nxp.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: Mingkai Hu <Mingkai.Hu@freescale.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 08:36:58 -04:00
Ley Foon Tan
0680f1b1f7 Convert CONFIG_SPL_BOARD_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_BOARD_INIT

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
[trini: Update the Kconfig logic]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 07:29:48 -04:00
Andre Przywara
411cf32d20 SPL: FIT: allow loading multiple images
So far we were not using the FIT image format to its full potential:
The SPL FIT loader was just loading the first image from the /images
node plus one of the listed DTBs.
Now with the refactored loader code it's easy to load an arbitrary
number of images in addition to the two mentioned above.
As described in the FIT image source file format description, iterate
over all images listed at the "loadables" property in the configuration
node and load every image at its desired location.
This allows to load any kind of images:
- firmware images to execute before U-Boot proper (for instance
  ARM Trusted Firmware (ATF))
- firmware images for management processors (SCP, arisc, ...)
- firmware images for devices like WiFi controllers
- bit files for FPGAs
- additional configuration data
- kernels and/or ramdisks
The actual usage of this feature would be platform and/or board specific.

Also update the FIT documentation to mention the new SPL feature and
provide an example .its file to demonstrate its features.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-17 23:15:43 +05:30
Andre Przywara
8baa381882 SPL: FIT: factor out spl_load_fit_image()
At the moment we load two images from a FIT image: the actual U-Boot
image and the .dtb file. Both times we have very similar code, that deals
with alignment requirements the media we load from imposes upon us.
Factor out this code into a new function, which we just call twice.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-17 23:15:25 +05:30
Andre Przywara
5c8c8faccf SPL: FIT: improve error handling
At the moment we ignore any errors due to missing FIT properties,
instead go ahead and calculate our addresses with the -1 return value.
Fix this and bail out if any of the mandatory properties are missing.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-17 23:14:52 +05:30
Andre Przywara
736806fbfa SPL: FIT: rework U-Boot image loading
Currently the SPL FIT loader always looks only for the first image in
the /images node a FIT tree, which it loads and later executes.

Generalize this by looking for a "firmware" property in the matched
configuration subnode, or, if that does not exist, for the first string
in the "loadables" property. Then using the string in that property,
load the image of that name from the /images node.
This still loads only one image at the moment, but refactors the code to
allow extending this in a following patch.
To simplify later re-usage, we also generalize the spl_fit_select_index()
function to not return the image location, but just the node offset.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-17 23:14:30 +05:30
Andre Przywara
4b9340abdc SPL: FIT: refactor FDT loading
Currently the SPL FIT loader uses the spl_fit_select_fdt() function to
find the offset to the right DTB within the FIT image.
For this it iterates over all subnodes of the /configuration node in
the FIT tree and compares all "description" strings therein using a
board specific matching function.
If that finds a match, it uses the string in the "fdt" property of that
subnode to locate the matching subnode in the /images node, which points
to the DTB data.
Now this works very well, but is quite specific to cover this particular
use case. To open up the door for a more generic usage, let's split this
function into:
1) a function that just returns the node offset for the matching
   configuration node (spl_fit_find_config_node())
2) a function that returns the image data any given property in a given
   configuration node points to, additionally using a given index into
   a possbile list of strings (spl_fit_select_index())
This allows us to replace the specific function above by asking for the
image the _first string of the "fdt" property_ in the matching
configuration subnode points to.

This patch introduces no functional changes, it just refactors the code
to allow reusing it later.

(diff is overly clever here and produces a hard-to-read patch, so I
recommend to throw a look at the result instead).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-17 23:13:27 +05:30
Tom Rini
4125bbcef6 Merge branch 'master' of git://git.denx.de/u-boot-mmc
- Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to
  match other TI platforms in the same situation.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-16 08:10:50 -04:00
Tom Rini
d09ec7f816 Merge branch 'master' of git://git.denx.de/u-boot-video 2017-05-15 20:16:02 -04:00
Philipp Tomsich
10ba6b3339 video: bmp: rename CONFIG_BMP_24BMP to CONFIG_BMP_24BPP
Due to a typo, the 24 bit-per-pixel configuration ends in 24BMP
instead of 24BPP. This change renames it throughout the source tree
for consistency and to make moving these options into Kconfig easier
and less error-prone.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2017-05-15 20:55:13 +02:00
Jernej Skrabec
43c6bdd020 edid: Add HDMI flag to timing info
Some DVI monitors don't show anything in HDMI mode since audio stream
confuses them. To solve this situation, this commit adds HDMI flag in
timing data and sets it accordingly during edid parsing.

First existence of extension block is checked. If it exists and it is
CEA861 extension, then data blocks are checked for presence of HDMI
vendor specific data block. If it is present, HDMI flag is set.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 20:32:12 +02:00
Jernej Skrabec
dc8cae4df3 edid: Set timings flags according to edid
Timing flags are never set, so they may contain garbage. Since some
drivers check them, video output may be broken on those drivers.

Initialize them to 0 and check for few common flags.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 20:28:12 +02:00
Tom Rini
cb33bda44f Merge branch 'master' of git://git.denx.de/u-boot-i2c 2017-05-15 13:01:26 -04:00
Tom Rini
8850c5d57c Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD
In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15 10:40:05 -04:00
Angelo Dureghello
0ce452872f board_f: skip timer_init() on Coldfire archs
Coldfire arch is not happy with timer_init since interrupt handlers
are still not set at that stage, and the boot hangs silently.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-05-15 10:38:09 -04:00
Kever Yang
bcc1726a7b spl: add support to booting with ATF
ATF(ARM Trusted Firmware) is used by ARM arch64 SoCs, find more infomation
about ATF at: https://github.com/ARM-software/arm-trusted-firmware

SPL is considered as BL2 in ATF terminology, it needs to load other parts
of ATF binary like BL31, BL32, SCP-BL30, and BL33(U-Boot). And needs to
prepare the parameter for BL31 which including entry and image information
for all other images. Then the SPL handle PC to BL31 with the parameter,
the BL31 will do the rest of work and at last get into U-Boot(BL33).

This patch needs work with patches from Andre for SPL support multi
binary in FIT.

The entry point of bl31 and bl33 are still using hard code because we
still can not get them from the FIT image information.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-15 10:38:09 -04:00
Masahiro Yamada
792f0054a4 mmc: descend into drivers/mmc only when CONFIG_MMC is enabled
This simplifies makefiles.  Also, arrange the order of objects in
drivers/mmc/Makefile so that the framework objects are listed before
drivers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-15 18:28:23 +09:00
Masahiro Yamada
4aa2ba3a34 mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature.  Deprecate the
former.

This commit was generated with the sed script 's/GENERIC_MMC/MMC/'
and manual fixup of drivers/mmc/Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-15 18:28:23 +09:00
Simon Glass
213f27f3f9 Drop CONFIG_I2CFAST
This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-15 06:19:00 +02:00
Simon Glass
69153988a6 i2c: Finish dropping use of CONFIG_I2C_HARD
Drop use of this long-deprecated option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-15 06:18:30 +02:00
Tom Rini
82b9dc63db common: Only build cli_readline.o for CMDLINE on non-SPL
With gcc-6 and later we may get a warning such as:
.../common/cli_readline.c:20:21: warning: ‘tab_seq’ defined but not used [-Wunused-const-variable=]
 static const char   tab_seq[] = "        "; /* used to expand TABs */
                     ^~~~~~~
.../common/cli_readline.c:19:19: warning: ‘erase_seq’ defined but not used [-Wunused-const-variable=]
 static const char erase_seq[] = "\b \b"; /* erase sequence */
                   ^~~~~~~~~

Because in SPL we're normally not doing interactive commands anyhow, so
lets just not compile this at all in SPL.  This also means that we need
to correct the logic (and comment) about what the drivers/ddr/fsl/ and
CONFIG_FSL_DDR_INTERACTIVE requires and this will be included in SPL
there.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-12 08:37:33 -04:00
xypron.glpk@gmx.de
902f5bcfbc env: avoid possible NULL pointer access
env_attr_lookup call env_attr_walk with
callback = regex_callback.

In env_attr_walk
attributes = strchr(entry_cpy, ENV_ATTR_SEP)
will return NULL if ENV_ATTR_SEP is not found.

In the aftermath regex_callback may call
strlen(attributes)
with a NULL value which will lead to a failure.

The problem was indicated by scan-clam.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-05-12 08:37:17 -04:00
xypron.glpk@gmx.de
9b57e252ff env: correct sign for error code
Error codes should be negative.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-05-12 08:37:16 -04:00
B, Ravi
66928afb6b common: dfu: ignore reset for spl-dfu
The SPL-DFU feature enable to load and
execute u-boot from RAM over usb from
PC using dfu-util.
Hence dfu-reset should not be issued
when dfu-util -R switch is issued.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
2017-05-12 08:37:09 -04:00
B, Ravi
1b19cbdbf7 spl: Kconfig: dfu: spl-dfu depends on SPL_RAM_SUPPORT
Since SPL_DFU_SUPPORT is depends on SPL_RAM_SUPPORT,
hence select SPL_DFU_SUPPORT only when
SPL_RAM_SUPPORT is chosen.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-12 08:37:09 -04:00
B, Ravi
6e7585bb64 boot: fdt: Perform arch_fixup_fdt() on the given device tree for falcon boot
In single stage bootmode or falcon boot mode, the SPL shall update the
device tree that we load with the normal fixups done via
arch_fixup_fdt(), when possible (ie we have enough information in this
restricted environment to be able to do that still).  This will include
for example updating them memory nodes.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
[trini: Reword commit message]
2017-05-11 22:21:26 -04:00
B, Ravi
984a3c8777 spl: fdt: support for fdt fixup for falcon boot
Adding support for fdt fixup to update the
memory node in device tree for falcon boot.

This is needed for single stage or falcon
bootmode, to pass memory configuration to
kernel through DT memory node.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-05-11 22:04:26 -04:00
Lokesh Vutla
15eb1d43bf spl: reorder the assignment of board info to global data
Move the assignment of board info to global data a bit early which is
safe,
so that ram details can be used to enable caches.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-11 22:03:41 -04:00
Philipp Tomsich
2bac55bc16 spl: spi: override CONFIG_SYS_SPI_U_BOOT_OFFS via /config-property
For the RK3399-Q7, we need some flexibility (depending on the feature
set we include in the SPL stage and how large our SPI flash is) in
positioning the SPL payload (i.e. the FIT image containing U-Boot, ATF
and the M0 payload) in our SPI flash.

To avoid having to deal with this through different U-Boot images, we
introduce a the '/config/u-boot,spl-payload-offset' property node
allow it to override the default setting.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:39 -04:00
Alex Deymo
88b6329cce disk: Return the partition number in part_get_info_by_name()
Similar to what blk_get_device_part_str() does, this patch makes
part_get_info_by_name() return the partition number in case of a match.
This is useful when the partition number is needed and not just the
descriptor.

Signed-off-by: Alex Deymo <deymo@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:37 -04:00
Alex Deymo
210a7176ee image: Update include/android_image.h
Update the Android image header format to the latest version published
in AOSP. The original code moved to a new repository, so this patch also
updates the reference to that path.

Signed-off-by: Alex Deymo <deymo@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:37 -04:00
Simon Glass
d08e42a8cb dm: video: Add driver-model support to lcd_simplefb
Allow this to work with CONFIG_DM_VIDEO enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2017-05-09 20:20:41 -04:00
Simon Glass
452614556c dm: video: Refactor lcd_simplefb to prepare for driver model
Adjust this function so that we can convert it to support CONFIG_DM_VIDEO
without a lot of code duplication.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2017-05-09 20:20:40 -04:00
Jean-Jacques Hiblot
d52063b84f scsi: dm: split scsi_scan()
The DM version of scsi_scan() is becoming a bit long, it can be split:
scsi_scan() iterates over the IDs and LUNs and for each id/lun pair calls
do_scsi_scan_one() to do the work of:
 - detecting an attached drive
 - creating the associated block device if a drive is found.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 12:14:16 -06:00
Tom Rini
2f92629112 Merge branch 'next' of git://git.denx.de/u-boot-spi 2017-05-08 15:44:52 -04:00
Vikas Manocha
5bf5250e9d spl: make image arg or fdt blob address reconfigurable
At present fdt blob or argument address being passed to kernel is fixed at
compile time using macro CONFIG_SYS_SPL_ARGS_ADDR. FDT blob from
different media like nand, nor flash are copied to the address pointed
by the macro.
The problem is, it makes args/fdt blob compulsory to copy which is not required
in cases like for NOR Flash. This patch removes this limitation.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-08 11:38:40 -04:00
Andreas Fenkart
0b2e5bbe6a env_sf: use DIV_ROUND_UP to calculate number of sectors to erase
simpler to read

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-03 11:18:20 +05:30
Andreas Fenkart
c041c60c6c env_sf: re-order error handling in single-buffer env_relocate_spec
this makes it easier comparable to the double-buffered version

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-03 11:18:06 +05:30
Andreas Fenkart
8fee8845e7 enf_sf: reuse setup_flash_device instead of open coding it
setup_flash_device selects one of two code paths depending on the driver
model being used (=CONFIG_DM_SPI_FLASH). env_relocate_spec only used
the non driver-model code path. I'm unsure why, either none of the
platforms that need relocation use the driver model, or - worse - the
driver model is not yet usable when relocating.

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-03 11:17:54 +05:30
Andreas Fenkart
afa81a7750 env_sf: factor out prepare_flash_device
copy&paste code found in single/double buffered code path

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-03 11:17:10 +05:30
Tom Rini
26d61195f8 fdt: Move fdt_fixup_ethernet to a common place
With 3f66149d9f we no longer have a common call fdt_fixup_ethernet.
This was fine to do on PowerPC as they largely had calls already in
ft_cpu_fixup.  On ARM however we largely relied on this call.  Rather
than introduce a large number of changes to ft_cpu_fixup /
ft_board_fixup we recognize that this is a common enough call that we
should be doing it in a central location.  Do it early enough that we
can do any further updates in ft_cpu_fixup / ft_board_fixup.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Chou <thomas@wytron.com.tw> (maintainer:NIOS)
Cc: York Sun <york.sun@nxp.com> (maintainer:POWERPC MPC85XX)
Cc: Stefan Roese <sr@denx.de> (maintainer:POWERPC PPC4XX)
Cc: Simon Glass <sjg@chromium.org>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Fixes: 3f66149d9f ("Remove extra fdt_fixup_ethernet() call")
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <york.sun@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-01 09:11:59 -04:00
Jean-Jacques Hiblot
4e27b9a584 dm: scsi: fix divide-by-0 error in scsi_scan()
With DM_SCSI enabled, blk_create_devicef() is called with blkz = 0, leading
to a divide-by-0 exception.
scsi_detect_dev() can be used to get the required parameters (block size
and number of blocks) from the drive before calling blk_create_devicef().

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-14 19:38:57 -06:00
Jean-Jacques Hiblot
1330a726ff scsi: move the partition initialization out of the scsi detection
We might want to get information about the scsi device without initializing the partition.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-14 19:38:57 -06:00
Jean-Jacques Hiblot
e39cecfdaf scsi: make the LUN a parameter of scsi_detect_dev()
This is a cosmetic change. target and LUN have kind of the same role in
this function. One of them was passed as a parameter and the other was
embedded in a structure. For consistency, pass both of them as parameters.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-14 19:38:57 -06:00
Tom Rini
bdf1ea11c8 Merge branch 'master' of git://git.denx.de/u-boot-usb 2017-04-14 10:58:49 -04:00
Troy Kisky
1e5eca7d42 usb: return 0 from usb_stor_get_info even if removable media
This fixes a regression caused by

commit 07b2b78ce4
    dm: usb: Convert USB storage to use driver-model for block devs

which caused part_init to be called when it was not previously.
Without this patch, the following happens when a USB sd card reader is used.

=> usb start
starting USB...
USB0:   Port not available.
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 3 USB Device(s) found
       scanning usb for storage devices... Device NOT ready
   Request Sense returned 02 3A 00
 ### ERROR ### Please RESET the board ###

This happens because dev_desc->blksz is 0.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2017-04-14 16:44:17 +02:00
Simon Glass
f1683aa73c board_f: Rename initdram() to dram_init()
This allows us to use the same DRAM init function on all archs. Add a
dummy function for arc, which does not use DRAM init here.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Dummy function on nios2]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-13 09:40:57 -04:00
Stefano Babic
9d80b49a67 env: split fw_env.h in public and private parts
Move U-Boot private data into a separate file. This
lets export fw_env.h to be used by external programs
that want to change the environment using the library
built in tools/env.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-04-12 13:28:28 -04:00
Stefano Babic
b80c0b9934 Rename aes.h to uboot_aes.h
aes.h is a too generic name if this file can
be exported and used by a program.
Rename it to avoid any conflicts with
other files (for example, from openSSL).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-04-12 13:28:27 -04:00
Andrew F. Davis
6dca5e8ab5 spl: net: Add FIT image support over network boot
FIT support in the net boot case is much like the RAM boot case in that
we load our image to "load_addr" and pass a dummy read function into
"spl_load_simple_fit()". As the load address is no longer hard-coded to
the final execution address, legacy image loading will require load_addr
to be set correctly in the image header.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-08 21:35:08 -04:00
Tom Rini
089795090a Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2017-04-08 09:28:02 -04:00
Alexandru Gagniuc
b09ece0836 common/xyzModem.c: Do not use hard-coded address for debug buffer
Under the plethora of #ifdefs, the xyzModem code hid this pearl:
static char *zm_out = (char *) 0x00380000;
This was only enabled when DEBUG is defined, so it's probably why it
went unnoticed for so long. No idea what platform had memory at that
exact location, but the this approach is extremely hacky.
Use a static buffer instead.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-04-08 09:26:55 -04:00
Alexandru Gagniuc
306b236bc1 common/xyzModem.c: unifdef (Remove useless #ifdefs)
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-04-08 09:26:54 -04:00
Alexandru Gagniuc
0dcf18c69d spl: Kconfig: SPL_MMC_SUPPORT depends on GENERIC_MMC
spl_mmc.c calls mmc_initialize(). This symbol is provided in
drivers/mmc/mmc.c when CONFIG_GENERIC_MMC is enabled.
The sunxi Kconfig case is an oddball because it redefines
SPL_MMC_SUPPORT.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
[trini: Update arch/arm/cpu/armv8/zynqmp/Kconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-08 09:26:54 -04:00
Nobuhiro Iwamatsu
fad6a2b771 common, kconfig: Fix defaut value of BOOTSTAGE_STASH_SIZE
The default value of BOOTSTAGE_STASH_SIZE should be set to hexadecimal,
but an integer value is set. This fixes the BOOTSTAGE_STASH_SIZE number
from hexadecimal to integer.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-04-08 09:26:53 -04:00
Vikas Manocha
634fcf0848 spl: armv7m: keep ARM v7M in thumb mode while jumping to entry point
On ARM v7M, the processor will return to ARM mode when executing blx
instruction with bit 0 of the address == 0. Always set it to 1 to stay
in thumb mode.

Similar commit:
f99993c108
Author: Matt Porter <mporter@konsulko.com>
Date:   Tue May 5 15:00:23 2015 -0400
common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec()

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-04-08 09:26:53 -04:00
Joakim Tjernlund
3f66149d9f Remove extra fdt_fixup_ethernet() call
ft_cpu_setup() already calls fdt_fixup_ethernet(), calling it
in image_setup_libfdt() is both redundant and breaks any modifications
done by ft_board_setup(). Restore the old behavior by removing
the call in image_setup_libfdt()

Fixes: 13d06981a9 ("image: Add device tree setup to image library")
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
2017-04-08 09:26:50 -04:00
Jean-Jacques Hiblot
687d207374 env_mmc: Allow SPL to use any MMC device to load/save the environment
SPL has been restricted to use only dev 0 based on the assumption that only
one MMC device is registered. This is not always the case and many
platforms now register several devices as expected by the spl mmc boot code
For those platform SPL_ENV_SUPPORT is broken if dev is forced to 0.

A word of warning: this commit may break SPL_ENV_SUPPORT on platforms that
do not register the same MMC controllers in SPL and in u-boot (mostly iMX6
based platforms). Fortunately none of those activate SPL_ENV_SUPPORT in
their default configuration.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-04-08 09:26:44 -04:00
Maxime Ripard
fb1c43cc37 common: Move environment choice to Kconfig
The environment location is something that might change per board
(depending on what storage options are availaible there) or depending on
the user choice (when we have several options).

Instead of hardcoding it in our configuration header, create a Kconfig
choice with the options we use for now, and the symbols that depend on it.

Once done, also remove the irrelevant sunxi defines.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-07 11:23:45 +05:30
Tom Rini
01abae4d04 Remove various unused interrupt related code
With d53ecad92f some unused interrupt related code was removed.
However all of these options are currently unused.  Rather than migrate
some of these options to Kconfig we just remove the code in question.

The only related code changes here are that in some cases we use
CONFIG_STACKSIZE in non-IRQ related context.  In these cases we rename
and move the value local to the code in question.

Fixes: d53ecad92f ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-06 20:42:18 -04:00
Simon Glass
1fbf97dc45 board_f: powerpc: Drop unused headers
These includes don't seem to be needed now. Drop them. Reserve the
mp.h header for PowerPC for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-05 16:36:57 -04:00
Simon Glass
e47b2d674f board_f: Make relocation functions generic
This header file is used by three archs. It could be used by all of them
since relocation is a common function. Move it into a generic file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:57 -04:00
Simon Glass
96d4b75c0d board_f: Make init_helpers generic
This header file is used by two archs. It could be used by all of them
since it allows the cache to be on during relocation. Move it into a
generic file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:56 -04:00
Simon Glass
e5fb573f64 powerpc: Move setup_board_extra() into a PPC file
We don't need this PPC-specific function in generic code. Move it to
the powerpc directory.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 16:36:55 -04:00
Simon Glass
056285fd45 board_f: Move errno.h down to the bottom
This is to keep the header file order consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-05 16:36:55 -04:00
Simon Glass
479312233c board_f: Drop unused headers
Drop headers which are not used or needed in this file. The compiler.h
header is included by common.h.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-05 16:36:52 -04:00
Simon Glass
76b00aca4f board_f: Drop setup_dram_config() wrapper
By making dram_init_banksize() return an error code we can drop the
wrapper. Adjust this and clean up all implementations.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 16:36:51 -04:00
Simon Glass
abf7f4c704 board_f: Drop CONFIG_SPL_BUILD check
This is never defined when building this file, so drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-05 16:36:50 -04:00
Simon Glass
0f079eb51c board_f: Put video memory reservation in one function
Move the ugly #ifdefs inside the reserve_video() function so we can
collect all this init into one place.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:49 -04:00
Simon Glass
80d4bcd3ec board_f: Move the extra #ifdef condition into reserve_mmu()
The arch-specific details of the cache being off are best handled inside
the reserve_mmu(). This cleans up the init sequence a little.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-05 16:36:49 -04:00
Simon Glass
b56db48615 board_f: Use a single condition for reserve_logbuffer()
CONFIG_ALT_LB_ADDR is really a detail of how this logbuffer is allocated
rather than whether to do it at all. So move the #ifdef into the function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:48 -04:00
Simon Glass
c67f432ecd xtensa: Place relocated U-Boot in the normal place
All archs put U-Boot at the bottom of the relocated region. Xtensa does
not, but perhaps not for any good reason. Adjust it to see if things
still work OK.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:48 -04:00
Simon Glass
088454cde2 board_f: Drop return value from initdram()
At present we cannot use this function as an init sequence call without a
wrapper, since it returns the RAM size. Adjust it to set the RAM size in
global_data instead, and return 0 on success.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:59:20 -04:00
Simon Glass
52c411805c board_f: Drop board_type parameter from initdram()
It looks like only cm5200 and tqm8xx use this feature, so we don't really
need it in generic code. Drop it and have the users access gd->board_type
directly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:58:44 -04:00
Simon Glass
76d1d02fd2 board_f: x86: Use checkcpu() for CPU init
At present we misuse print_cpuinfo() do so CPU init on x86. This is done
because it is the next available call after the console is enabled. But
several arches use checkcpu() instead. Despite the horrible name (which
we can fix), it seems a better choice.

Adjust the various x86 CPU implementations to move their init code into
checkcpu() and use print_cpuinfo() only for printing CPU info.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:55:09 -04:00
Simon Glass
8749fa6af3 board_f: powerpc: Make prt_8260_rsr(), prt_8260_clks() private
Move these two function calls into checkcpu(), which is called on this
arch immediately after these two.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:55:08 -04:00
Simon Glass
689697785e board_f: sandbox: Move sandbox_early_getopt_check() into misc_init_f()
We don't need a special hook for sandbox as one of the later ones will do
just as well. We can print error messages about bad options after we
print the banner. In fact, it seems better.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:55:07 -04:00
Simon Glass
d891ab95c2 board_f: powerpc: Move prt_83xx_rsr() to private code
This function is called just before checkcpu() on MPX83xx. Move it to the
code for that arch.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 13:55:06 -04:00
Simon Glass
727e94a4ac powerpc: freescale: Unify the two get_clocks() calls
Combine the conditions so this appears in the init list only once.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:55:05 -04:00
Simon Glass
11b33e64dd board_f: Use timer_init() on all archs
More than half of the architectures use this function so let's make them
all use it.

For those which don't actually define it, we can rely on the weak function
in lib/time.c

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:55:05 -04:00
Simon Glass
70e2aaf380 board_f: powerpc: Use timer_init() instead of init_timebase()
There is no good reason to use a different name on PowerPC. Change it to
timer_init() like the others.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:54:29 -04:00
Simon Glass
1793e78225 board_f: powerpc: Unified get_clocks() portion of init sequence
Now that both branches of the #if do the same thing, we can unify them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:53:02 -04:00
Simon Glass
75efc34bfa board_f: Remove adjust_sdram_tbs_8xx() from the init sequence
We can just call this from the only place that needs it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:52 -04:00
Simon Glass
26345552d6 board_f: Remove sdram_adjust_866() from the init sequence
We can just call this from the only function that needs it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:51 -04:00
Simon Glass
d593c61672 board_f: powerpc: Rename get_clocks_866() to get_clocks()
We really don't need to have a name like this in the generic init
sequence. Use the generic get_clocks() name so that we can merge these
two at some point.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:50 -04:00
Simon Glass
c252c06857 board_f: powerpc: Join the two CONFIG_8xx_CPUCLK_DEFAULT sections
We have two chunks of code which depend on this CONFIG options. There is
likely no need to keep them apart, so join them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:49 -04:00
Simon Glass
671549e5b0 board_f: x86: Rename x86_fsp_init() to arch_fsp_init()
While x86 is the only user and this could in principle be moved to
arch_cpu_init() there is some justification for this being a separate
call. It provides a way to handle init which is not CPU-specific, but
must happen before the CPU can be set up.

Rename the function to be more generic.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:36 -04:00
Simon Glass
bb967240bb board_f: sandbox: Move setup_ram_buf() to private code
There is no need to have this call in the generic init sequence and no
other architecture has needed it in the time it has been there. Move it
into sandbox's private code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:35 -04:00
Tom Rini
936478e797 SPARC: Remove
The SPARC architecture is currently unmaintained, remove.

Cc: Francois Retief <fgretief@spaceteq.co.za>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05 13:52:20 -04:00