i2c: Finish dropping use of CONFIG_I2C_HARD

Drop use of this long-deprecated option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Simon Glass 2017-05-12 21:09:56 -06:00 committed by Heiko Schocher
parent 64a144dcea
commit 69153988a6
5 changed files with 11 additions and 17 deletions

16
README
View file

@ -2204,7 +2204,9 @@ The following options need to be configured:
If you do not have i2c muxes on your board, omit this define.
- Legacy I2C Support: CONFIG_HARD_I2C
----under removal:
- Legacy I2C Support: CONFIG_SOFT_I2C
NOTE: It is intended to move drivers to CONFIG_SYS_I2C which
provides the following compelling advantages:
@ -2213,14 +2215,12 @@ The following options need to be configured:
- approved multibus support
- better i2c mux support
** CONFIG_HARD_I2C is now being removed **
** CONFIG_SOFT_I2C is now being removed **
----under removal:
In both cases you will need to define CONFIG_SYS_I2C_SPEED
to be the frequency (in Hz) at which you wish your i2c bus
to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie
the CPU's i2c node address).
With CONFIG_SOFT_I2C you will need to define
CONFIG_SYS_I2C_SPEED to be the frequency (in Hz) at which you
wish your i2c bus to run and CONFIG_SYS_I2C_SLAVE to be the
address of this node (ie the CPU's i2c node address).
Now, the u-boot i2c code for the mpc8xx
(arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node

View file

@ -73,11 +73,9 @@ void eeprom_init(int bus)
#endif
/* I2C EEPROM */
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
#if defined(CONFIG_SYS_I2C)
if (bus >= 0)
i2c_set_bus_num(bus);
#endif
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
}

View file

@ -184,7 +184,7 @@ __weak int dram_init_banksize(void)
return 0;
}
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
#if defined(CONFIG_SYS_I2C)
static int init_func_i2c(void)
{
puts("I2C: ");
@ -765,7 +765,7 @@ static const init_fnc_t init_sequence_f[] = {
misc_init_f,
#endif
INIT_FUNC_WATCHDOG_RESET
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
#if defined(CONFIG_SYS_I2C)
init_func_i2c,
#endif
#if defined(CONFIG_HARD_SPI)

View file

@ -21,7 +21,7 @@
#include <logbuff.h>
#endif
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
#if defined(CONFIG_SYS_I2C)
#include <i2c.h>
#endif
@ -346,9 +346,6 @@ int stdio_add_devices(void)
#ifdef CONFIG_SYS_I2C
i2c_init_all();
#else
#if defined(CONFIG_HARD_I2C)
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
#endif
#ifdef CONFIG_DM_VIDEO
/*

View file

@ -1134,7 +1134,6 @@ CONFIG_G_DNL_UMS_VENDOR_NUM
CONFIG_H264_FREQ
CONFIG_H8300
CONFIG_HALEAKALA
CONFIG_HARD_I2C
CONFIG_HARD_SPI
CONFIG_HASH_VERIFY
CONFIG_HAS_DATAFLASH