Commit graph

717 commits

Author SHA1 Message Date
Patrice Chotard
012afa83ae test: dm: spi: Replace _spi_get_bus_and_cs() by spi_get_bus_and_cs() in some case
In case _spi_get_bus_and_cs()'s parameters drv_name and dev_name are
respectively set to NULL and 0, use spi_get_bus_and_cs() instead.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
Patrice Chotard
61708bb0a2 spi: spi-uclass: Add new spi_get_bus_and_cs() implementation
Move legacy spi_get_bus_and_cs() code to _spi_get_bus_and_cs().

Add new spi_get_bus_and_cs() implementation which rely on DT
for speed and mode and don't need any drv_name nor dev_name
parameters. This will prepare the ground for next patch.

Update all callers to use _spi_get_bus_and_cs() to keep the
same behavior.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
Andrew Scull
2635e3b50f pci: Add mask parameter to dm_pci_map_bar()
Add a mask parameter to control the lookup of the PCI region from which
the mapping can be made.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 18:33:29 -04:00
Andrew Scull
7739d93d82 pci: Match region flags using a mask
When converting addresses, apply a mask to the region flags during
lookup. This allows the caller to specify which flags are important and
which are not, for example to exclude system memory regions.

The behaviour of the function is changed such that they don't
preferentially search for a non-system memory region. However, system
memory regions are added after other regions in decode_regions() leading
to a similar outcome.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 18:33:26 -04:00
Andrew Scull
12507a2d22 pci: Map bars with offset and length
Evolve dm_pci_map_bar() to include an offset and length parameter. These
allow a portion of the memory to be mapped and range checks to be
applied.

Passing both the offset and length as zero results in the previous
behaviour and this is used to migrate the previous callers.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 15:50:46 -04:00
Andrew Scull
55e6adbd78 test: pci: Test PCI address conversion functions
Add tests for the functions dm_pci_bus_to_phys() and
dm_pci_phys_to_bus() which convert between PCI bus addresses and
physical addresses based on the ranges declared for the PCI controller.

The ranges of bus#1 are used for the tests, adding a translation to one
of the ranges to cover more cases.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 15:50:46 -04:00
Andrew Scull
d69616e529 test: dm: devres: Remove use-after-free
Use-after-free shouldn't be used, even in tests. It's bad practice and
makes the test brittle.

Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-29 11:11:36 -04:00
Andrew Scull
7f58feae3f test: Fix pointer overrun in dm_test_devm_regmap()
This tests calls regmap_read() which takes a uint pointer as an output
parameter. The test was passing a pointer to a u16 which resulted in an
overflow when the output was written. Fix this by following the
regmap_read() API and passing a uint pointer instead.

Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-29 11:11:36 -04:00
Marek Vasut
876276f5de test: dm: led: Fix LED enumeration
The GPIO LED driver no longer considers the top level node an LED,
because it is not an LED. With this bug fixed, the LED enumeration
has changed. Update the test accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
2022-04-28 09:26:44 -04:00
Marek Vasut
69245e406e led: Drop led_default_state()
This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-28 09:26:44 -04:00
Tom Rini
8cfac237b9 Merge branch '2022-04-25-initial-implementation-of-stdboot'
To quote the author:
The bootflow feature provide a built-in way for U-Boot to automatically
boot an Operating System without custom scripting and other customisation.
This is called 'standard boot' since it provides a standard way for
U-Boot to boot a distro, without scripting.

It introduces the following concepts:

   - bootdev - a device which can hold a distro
   - bootmeth - a method to scan a bootdev to find bootflows (owned by
                U-Boot)
   - bootflow - a description of how to boot (owned by the distro)

This series provides an implementation of these, enabled to scan for
bootflows from MMC, USB and Ethernet. It supports the existing distro
boot as well as the EFI loader flow (bootefi/bootmgr). It works
similiarly to the existing script-based approach, but is native to
U-Boot.

With this we can boot on a Raspberry Pi 3 with just one command:

   bootflow scan -lb

which means to scan, listing (-l) each bootflow and trying to boot each
one (-b). The final patch shows this.

With a standard way to identify boot devices, booting become easier. It
also should be possible to support U-Boot scripts, for backwards
compatibility only.

...

The design is described in these two documents:

https://drive.google.com/file/d/1ggW0KJpUOR__vBkj3l61L2dav4ZkNC12/view?usp=sharing

https://drive.google.com/file/d/1kTrflO9vvGlKp-ZH_jlgb9TY3WYG6FF9/view?usp=sharing
2022-04-25 16:02:27 -04:00
Simon Glass
026e2136f8 test: dm: Restart USB before assuming it is stopped
Update the blk test to stop USB first, in case another test has started
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:03 -04:00
Simon Glass
9bd2f62d12 test: fastboot: Avoid using mmc1
The bootflow tests need to use an MMC with an associated backing file
containing a filesystem. Update the fastboot tests to cope with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:03 -04:00
Simon Glass
4e0710a2d0 dm: core: Allow finding a uclass device by partial name
In some cases two devices are related and the only way to tell is to
check that the names partially patch. Add a way to check this without
needing to create a new string for the comparison.

Fix the comment for device_find_child_by_namelen() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:03 -04:00
Simon Glass
6aa4fe3912 dm: core: Rename and fix uclass_get_by_name_len()
It seems that namelen is more common in U-Boot. Rename this function to
fit in better. Also fix a bug where it breaks the operation of
uclass_get_by_name() and add a test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reported-by: Tim Harvey <tharvey@gateworks.com>
2022-04-25 10:00:03 -04:00
AKASHI Takahiro
8ff50227be test: dm: add tests for tag support
The new test covers all tag-related interfaces.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-23 22:05:34 +02:00
Simon Glass
092d5c2a83 dm: core: Allow devres to be disabled in SPL
At present if devres is enabled in U-Boot proper it is enabled in SPL.
We don't normally want it there, so disable it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Angus Ainslie <angus@akkea.ca>
2022-04-18 17:53:56 -04:00
Tom Rini
7f418ea598 Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net
- DM9000 DM support
- tftp server bug fix
- mdio ofnode support functions
- Various phy fixes and improvements.

[trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c
drivers/net/phy/phy.c include/phy.h]
2022-04-15 08:10:32 -04:00
Sean Anderson
679190c41a test: serial: Add test for putc/puts
This adds a test to ensure that puts is equivalent to putc called in a
loop. We don't verify the contents of the message to avoid having to
record console output a second time (though that could be added in the
future). The globals are initialized to non-zero values to avoid a
warning; in particular, the character count is off-by-one (but we always
make relative measurements).

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-14 15:39:15 -04:00
Marek Behún
123ca114e0 net: introduce helpers to get PHY interface mode from a device/ofnode
Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the
"phy-mode" / "phy-connection-type" property. Add corresponding UT test.

Use them treewide.

This allows us to inline the phy_get_interface_by_name() into
ofnode_read_phy_mode(), since the former is not used anymore.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-10 08:44:12 +03:00
Marek Behún
1776a24bbb treewide: use dm_mdio_read/write/reset() wrappers
Use the new dm_mdio_read/write/reset() wrappers treewide, instead of
always getting and dereferencing MDIO operations structure pointer.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:12 +03:00
Marek Behún
f3dd213e15 net: introduce helpers to get PHY ofnode from MAC
Add helpers ofnode_get_phy_node() and dev_get_phy_node() and use it in
net/mdio-uclass.c function dm_eth_connect_phy_handle(). Also add
corresponding UT test.

This is useful because other part's of U-Boot may want to get PHY ofnode
without connecting a PHY.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-10 08:44:12 +03:00
Simon Glass
49e8668181 dm: blk: Expand iteration and add tests
Add some functions which support iteration before probing. Also add tests
for the functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:03:17 -04:00
Tom Rini
34d2b7f203 Prepare v2022.04-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmJBxXQACgkQFHw5/5Y0
 tywKKAv+L+sCmqfJ4Zy2cdzWkGZI3NZMWi8yzUUU37RH5I+3Blht+z6dMslm9gCB
 7/PwS5y7WH3l3wEdeXcw4FUCgNh3D8YyfCcVCsQ0Qxig49xwWz8Jn6t+haOWD6eW
 uXim+gSG+ceWTBrKf3InzXN5fHPIcF66r+k3opwAwIYKpT8p8CgM4ewshBCAsc6t
 6qSLf+A64JNv/y2DTS+sPDY68tnplbyRvrNb6YEazOF6b6SnSE2j+EH8RkIZ+2yT
 cTUhQ2o9JJIKnaG9MTqHB+XVe80oPB7bTWInFo2JxGn98XeS7CTCcnDZhLqWrvHF
 gBfcpEcVE2blVbg/Vo2x4rnU1dop44ch6pE9k5SPFJcPdlzdwFHHgGyfGi9LtD4K
 JAvaIQdz6ZEOQqShpCxcbL/g2/uoRaXFqC7E8IE+WdFMXGBQoZpqaoBMoefnyplk
 xrzqaQye38JgZDX0ku4cm4SMArAfr4sVHcdDlSlzY3y2KQ8Ead25irRvq7GoQ2Ad
 Odo9taQF
 =9g2Y
 -----END PGP SIGNATURE-----

Merge tag 'v2022.04-rc5' into next

Prepare v2022.04-rc5
2022-03-28 12:36:49 -04:00
Damien Le Moal
fd426b3106 k210: use the board vendor name rather than the marketing name
"kendryte" is the marketing name for the K210 RISC-V SoC produced by
Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210"
vendor,SoC compatibility string format in the device tree files and
use the SoC name for file names.
With these changes, the device tree files are more in sync with the
Linux kernel DTS and drivers, making uboot device tree usable by the
kernel.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-03-15 17:43:11 +08:00
Etienne Carriere
10d3e5d20b firmware: scmi: fix sandbox and related tests for clock discovery
Updates sandbox SCMI clock driver and tests since enabling CCF will
mandate clock discovery that is all exposed SCMI clocks shall be
discovered at initialization. For this reason, sandbox SCMI clock
driver must emulate all clocks exposed by SCMI server, not only those
effectively consumed by some other U-Boot devices.

Therefore the sandbox SCMI test driver exposes 3 clocks (IDs 0, 1 and 2)
and sandbox SCMI clock consumer driver gets 2 of them.

Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-02 17:42:06 -05:00
Etienne Carriere
41d62e2f27 sandbox: scmi: test against a single scmi agent
As per DT bindings since Linux kernel v5.14, the device tree can define
only 1 SCMI agent node that is named scmi [1]. As a consequence, change
implementation of the SCMI driver test through sandbox architecture to
reflect that.

This change updates sandbox test DT and sandbox SCMI driver accordingly
since all these are impacted.

Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-02 17:42:06 -05:00
Patrice Chotard
9876ae7db6 dm: Fix OF_BAD_ADDR definition
When OF_LIVE flag is enabled on a 64 bits platform, there is an
issue when dev_read_addr() is called and need to perform an address
translation using __of_translate_address().

In case of error, __of_translate_address() return's value is OF_BAD_ADDR
(wich is defined in include/dm/of.h to ((u64)-1) = 0xffffffffffffffff).
The return value of dev_read_addr() is often compared to FDT_ADDR_T_NONE
which is defined as (-1U) = 0xffffffff.
In this case the comparison is always false.

To fix this issue, define FDT_ADDR_T_NONE to (ulong)(-1) in case of
AARCH64. Update accordingly related tests.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-25 12:36:10 -07:00
Simon Glass
06f6f3d478 acpi: Tidy up the table list
At present this is really just a debugging aid, but it is a bit untidy.
Add proper columns so it is easier to read.

Sample output for coral:

    => acpi list
    Name      Base   Size  Detail
    ----  --------  -----  ------
    RSDP  79925000     24  v02 U-BOOT
    RSDT  79925030     48  v01 U-BOOT U-BOOTBL 20220101 INTL 0
    XSDT  799250e0     6c  v01 U-BOOT U-BOOTBL 20220101 INTL 0
    FACP  79929570     f4  v04 U-BOOT U-BOOTBL 20220101 INTL 1
    DSDT  79925280   32ea  v02 U-BOOT U-BOOTBL 20110725 INTL 20180105
    FACS  79925240     40
    MCFG  79929670     2c  v01 U-BOOT U-BOOTBL 20220101 INTL 0
    SPCR  799296a0     50  v02 U-BOOT U-BOOTBL 20220101 INTL 0
    TPM2  799296f0     4c  v04 U-BOOT U-BOOTBL 20220101 INTL 0
    APIC  79929740     6c  v02 U-BOOT U-BOOTBL 20220101 INTL 0
    SSDT  799297b0   1523  v02 U-BOOT U-BOOTBL 20220101 INTL 1
    NHLT  7992ace0    e60  v05 coral coral 3 INTL 0
    DBG2  7992db40     61  v00 U-BOOT U-BOOTBL 20220101 INTL 0
    HPET  7992dbb0     38  v01 U-BOOT U-BOOTBL 20220101 INTL 0

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
a924641632 acpi: Tidy up the item list
At present this is really just a debugging aid, but it is a bit untidy.
Add proper columns and display the type name instead of a number.

Sample output for coral:

   => acpi items
   Seq  Type       Addr  Size  Device/Writer
   ---  -----  --------  ----  -------------
     0  other  79925000    240  0base
     1  other  79925240     40  1facs
     2  dsdt   799252a4     58  board
     3  dsdt   799252fc     10  lpc
     4  other  79925280   32f0  3dsdt
     5  other  79928570   1000  4gnvs
     6  other  79929570    100  5fact
     7  other  79929670     30  5mcfg
     8  other  799296a0     50  5spcr
     9  other  799296f0     50  5tpm2
     a  other  79929740     70  5x86
     b  ssdt   799297d4     fe  maxim-codec
     c  ssdt   799298d2     28  i2c2@16,0
     d  ssdt   799298fa    270  da-codec
     e  ssdt   79929b6a     28  i2c2@16,1
     f  ssdt   79929b92     28  i2c2@16,2
    10  ssdt   79929bba     83  tpm@50
    11  ssdt   79929c3d     28  i2c2@16,3
    12  ssdt   79929c65    282  elan-touchscreen@10
    13  ssdt   79929ee7    285  raydium-touchscreen@39
    14  ssdt   7992a16c     28  i2c2@17,0
    15  ssdt   7992a194     d8  elan-touchpad@15
    16  ssdt   7992a26c    163  synaptics-touchpad@2c
    17  ssdt   7992a3cf     28  i2c2@17,1
    18  ssdt   7992a3f7    111  wacom-digitizer@9
    19  ssdt   7992a508     8f  sdmmc@1b,0
    1a  ssdt   7992a597     4b  wifi
    1b  ssdt   7992a5e2    1a0  cpu@0
    1c  ssdt   7992a782    1a0  cpu@1
    1d  ssdt   7992a922    1a0  cpu@2
    1e  ssdt   7992aac2    211  cpu@3
    1f  other  799297b0   1530  6ssdt
    20  other  7992ace0   2f10  8dev

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
94ba15a3f1 x86: Move base tables to a writer function
Use the new ACPI writer to write the base tables at the start of the area,
moving this code from the x86 implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
31c27eb830 x86: Use the ACPI table writer
Use the new ACPI writer to write the ACPI tables. At present this is all
done in one monolithic function. Future work will split this out.

Unfortunately the QFW write_acpi_tables() function conflicts with the
'writer' version, so disable that for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
cc1f8c3988 x86: acpi: Split out context creation from base tables
At present acpi_setup_base_tables() both sets up the ACPI context and
writes out the base tables.

We want to use an ACPI writer to write the base tables, so split this
function into two, with acpi_setup_ctx() doing the context set, and
acpi_setup_base_tables() just doing the base tables.

Disable the writer's write_acpi_tables() function for now, to avoid
build errors. It is enabled in a following patch.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
233f0e35a3 x86: Move the acpi table to generic global_data
Allow this to be used on any arch. Also convert to using macros so that
we can check the CONFIG option in C code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Alper Nebi Yasak
226fce6108 phy: Track power-on and init counts in uclass
On boards using the RK3399 SoC, the USB OHCI and EHCI controllers share
the same PHY device instance. While these controllers are being stopped
they both attempt to power-off and deinitialize it, but trying to
power-off the deinitialized PHY device results in a hang. This usually
happens just before booting an OS, and can be explicitly triggered by
running "usb start; usb stop" in the U-Boot shell.

Implement a uclass-wide counting mechanism for PHY initialization and
power state change requests, so that we don't power-off/deinitialize a
PHY instance until all of its users want it done. The Allwinner A10 USB
PHY driver does this counting in-driver, remove those parts in favour of
this in-uclass implementation.

The sandbox PHY operations test needs some changes since the uclass will
no longer call into the drivers for actions matching its tracked state
(e.g. powering-off a powered-off PHY). Update that test, and add a new
one which simulates multiple users of a single PHY.

The major complication here is that PHY handles aren't deduplicated per
instance, so the obvious idea of putting the counts in the PHY handles
don't immediately work. It seems possible to bind a child udevice per
PHY instance to the PHY provider and deduplicate the handles in each
child's uclass-private areas, like in the CLK framework. An alternative
approach could be to use those bound child udevices themselves as the
PHY handles. Instead, to avoid the architectural changes those would
require, this patch solves things by dynamically allocating a list of
structs (one per instance) in the provider's uclass-private area.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com> - Rock960
2022-01-14 14:36:57 -05:00
Simon Glass
84e63abfff video: Support showing the U-Boot logo
Show the U-Boot logo by default. This is only 7KB in size so seems like
a useful default for boards that enable a display.

If SPLASH_SCREEN is enabled, it is not enabled by default, so as not to
conflict with that feature.

Also disable it for tests, since we don't want to complicate the output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:32:46 +01:00
Simon Glass
4ea1548210 video: theadorable: Use RGB565 for BMP blitting
At present this uses RGB555 format for blitting to a display. Sandbox uses
565 and that seems to be more normal for BMP as well. Update the code
accordingly and add a test.

Note that this likely breaks the theadorable board so we may need to
discuss supporting both formats.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:23:52 +01:00
Simon Glass
c1cad06f69 video: Add a test for 16bpp BMP files
Add a compressed 16bpp BMP file and a test to cover this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:05:42 +01:00
Simon Glass
646e169aa0 video: bmp: Update RLE8 support to use the write function
Update this code to use write_pix8() rather than writing the pixels only
for a single supported display depth. This allows us to support any
depth.

Add some more tests too.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass
8657ad43f3 sandbox: video: Add BMP tests for 32bpp and 8bpp modes
Add a few more tests for BMP rendering. Use a back door into the sandbox
SDL driver to adjust the resolution at runtime.

The truetype code does not support 8bpp. Add this so that the display is
not blank when running in this mode.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass
6476c4d981 dm: core: Allow getting some basic stats
Add a function that returns some basic stats about driver model. For now
we only have two.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23 10:24:40 -05:00
Tom Rini
4afab30cae Prepare v2022.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmHArDwACgkQFHw5/5Y0
 tyzxyAv/SjZjoEwG8nu7ptVZqTsZfm+tVwwWmQEBAA40MXy/KSccDtbUwB5GCO6f
 Uvk+qFFDbCkbGZh5VKbQusMmUoB02Xu9zUoSxKxcXL4WfC6Bg5GV/UWN9s8G3Tm6
 4wcP0l8WFcQjjr89UfXugiZH58psvFu6PBbWVY4rMH9gZ5ds0AkNOF0L+HbdVmMR
 a5HBfrcySRY2kiTQuKF+RVlMW6BtaOqJp/XIyy8w6bH09ykMomj/u7z3JP3y9ZzL
 w3FXqCLlIEnvdDcqfWvfjoJ/gm0WcLulgSVpTFGS0jgJpnbeAURtZcuVgj6aPRUW
 FRon+u0tj3wpFjibs2cpyXWd+gw/bLLFpDXx78AUAPjxG31tEKbnR1j8R8wBZJ0B
 TqWZ3pCne/LPOT90y2KW2z6ty2n/yEn6qEFFT9MN9R4L0N+U0er//sYJC/nn/e6u
 fjvQ9OPLbnAfHVrad3ZeIkePrLOIF6XYwNQpsjt9aE2kU9IvV5sTa8TxZuQgasBU
 A46FgXtC
 =MEG2
 -----END PGP SIGNATURE-----

Merge tag 'v2022.01-rc4' into next

Prepare v2022.01-rc4
2021-12-20 17:12:04 -05:00
Simon Glass
42b7f4212a efi: Add uclass for devices provided by UEFI firmware
UCLASS_EFI_LOADER is used for devices created by applications and
drivers loaded by U-Boots UEFI implementation.

This patch provides a new uclass (UCLASS_EFI_MEDIA) to be used for devices
that provided by a UEFI firmware calling U-Boot as an EFI application.

If the two uclasses can be unified, is left to future redesign.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09 11:43:25 -08:00
Simon Glass
075bfc9575 dm: core: Add a way to obtain a string list
At present we support reading a string list a string at a time. Apart
from being inefficient, this makes it impossible to separate reading of
the devicetree into the of_to_plat() method where it belongs, since any
code which needs access to the string must read it from the devicetree.

Add a function which returns the string property as an array of pointers
to the strings, which is easily used by clients.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28 16:51:51 -07:00
Simon Glass
fb933d070e dm: core: Add tests for stringlist functions
These functions currently lack tests so add some. The error handling
differs betwee livetree and flattree at present, so only check the error
codes with livetree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28 16:51:51 -07:00
Heinrich Schuchardt
ace5bb3eca test/dm: fix watchdog test
For successful execution of the watchdog test we need both the GPIO as well
as the SANDBOX watchdog.

Avoid a build failure for CONFIG_WDT_GPIO=n.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-13 08:16:52 -07:00
Michael Walle
bce039acf2 test: dm: add test for ofnode_for_each_compatible_node()
Check that all matching nodes have the correct compatible and that there
is at least one match.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30
Mark Kettenis
fb57462437 test: Add tests for IOMMU uclass
Add a set of tests for the IOMMU uclass.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 08:46:44 -04:00
Thierry Reding
b9aad37591 fdtdec: Support reserved-memory flags
Reserved memory nodes can have additional flags. Support reading and
writing these flags to ensure that reserved memory nodes can be properly
parsed and emitted.

This converts support for the existing "no-map" flag to avoid extending
the argument list for fdtdec_add_reserved_memory() to excessive length.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-13 14:18:30 -07:00