Commit graph

69574 commits

Author SHA1 Message Date
Max Krummenacher
b8eecbac6a verdin-imx8mm: spl: enable pca9450 i2c level translator
Enable PCA9450 i2c level translator, as this is used for the
on module ADC.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00
Max Krummenacher
423ca964c3 verdin-imx8mm: implement hardware version detection
And select the correct devicetree accordingly by setting the variant
environment variable.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-06 15:31:37 +01:00
Max Krummenacher
7d43807d6c verdin-imx8mm: spl: switch to pca9450 pmic
V1.1A HW switched the PMIC from BD71837 to PCA9450.

- Disable combined DVS in PCA9450_BUCK123_DVS.
- Increase DDR Voltage to 0.95V as we use a 1.5GHz RAM.
- Configure WDOG_B behaviour.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00
Max Krummenacher
caafc6c497 ARM: dts: imx8mm-verdin: follow changed pmic
The used PMIC has been changed from RHOM BD71837 to NXP PCA9450A.
Adjust the device tree accordingly.
Remove the old ADC node as the ADC has been changed and has no longer
a separate power rail.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00
Igor Opaniuk
8f9abdf4d4 power: pmic: add SPL_DM_PMIC_PCA9450 symbol to Kconfig
Add SPL_DM_PMIC_PCA9450 symbol to Kconfig.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-12-06 15:31:37 +01:00
Max Krummenacher
5d89afe27f pca9450a: fix i2c address
The I2C address is 0x25, not 0x35. This according to the datasheet and
tests with a PCA9450A.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-12-06 15:31:37 +01:00
Marcel Ziswiler
a5b5ad4d85 toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skus
Add new i.MX 8M Mini/Plus SKUs to ConfigBlock handling:

0058: Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT

0059: Verdin iMX8M Mini Quad 2GB IT

0060: Verdin iMX8M Mini DualLite 1GB WB IT

0061: Verdin iMX8M Plus Quad 2GB

Rename existing SKU (use correct one):
Verdin iMX8M Nano SoloLite 1GB -> Verdin iMX8M Nano Quad 1GB Wi-Fi

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-06 15:31:37 +01:00
Haibo Chen
5d772196d9 mmc: fsl_esdhc_imx: optimize the timing setting
For imx usdhc/esdhc, once set the DDR_EN, enable the DDR mode, the
card clock will be divied by 2 automatically by the host. So need
to first config the DDR_EN correctly, then update the card clock.
This will make sure the actual card clock is as our expected.
IC also suggest config the DDR_EN firstly, then config the clock
divider.

For HS400/HS400ES mode, need to config the strobe dll, this need
to based on the correct target clock rate, so need to do this after
clock rate is update.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-12-06 15:31:37 +01:00
Oliver Graute
ea51af2fdd imx: imx8qm_rom7720_a1: add missing DTS to the MAINTAINERS
add the dts file to the MAINTAINERS entry

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06 15:31:37 +01:00
Ian Ray
4f1970f437 board: ge: bx50v3: check b850v3 power management watchdog
Set `bootcause' from b850v3 power management watchdog status.

Boot cause "REVERT" is no longer used, remove it.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:37 +01:00
Ian Ray
559aaa2526 board: ge: reduce VPD EEPROM partition size
Reduce vital product data size to match the latest specification.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:37 +01:00
Sebastian Reichel
2d86fb31bd board: ge: bx50v3: reduce magic numbers
Use VPD product ID instead of confidx, so that we can easily reuse the
product ID defines and avoid some magic numbers.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:36 +01:00
Sebastian Reichel
822e1b31bd board: ge: bx50v3: drop unused pinmux defines
Remove pinmux defines, that are no longer used after
converting the code to devicetree.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:36 +01:00
Ian Ray
f2ac6f7796 board: ge: bx50v3: correct CONFIG_CMD_NFS
Fix typo in NFS command configuration check.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:36 +01:00
Sebastian Reichel
c4c2d2465e board: ge: common: vpd: fix name
Commit f692b479f0 changed the VPD partition name from "vpd" to
"vpd@0". Fix the VPD reader code to use the new name, so that
the VPD code keeps working.

Fixes: f692b479f0 ("i2c: eeprom: Use reg property instead of offset and size")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:36 +01:00
Haibo Chen
b5874b552f mmc: fsl_esdhc_imx: add wait_dat0() support
Add wait_dat0() support, upper layer will use this callback.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-12-06 15:31:36 +01:00
Oliver Graute
b15cd88b22 imx: ahab: fix implicit declaration warning
Fix the following warning:

arch/arm/mach-imx/imx8/ahab.c:105:3: warning: implicit declaration of function ‘flush_dcache_range’ [-Wimplicit-function-declaration]
   flush_dcache_range(s, e);
   ^~~~~~~~~~~~~~~~~~

Include cpu_func.h header which declares the flush_dcache_range()
function.

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06 15:31:36 +01:00
Oliver Graute
492b728f9f imx: ahab: fix compiler warnings in debug
arch/arm/mach-imx/imx8/ahab.c: In function ‘authenticate_os_container’:
arch/arm/mach-imx/imx8/ahab.c:96:9: warning: format ‘%x’ expects argument of type
‘unsigned int’, but argument 9 has type ‘ulong {aka long unsigned int}’ [-Wformat=]
   debug("img %d, dst 0x%x, src 0x%x, size 0x%x\n",

Fix those by using "%lu" specified.

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06 15:31:36 +01:00
Oliver Graute
f4433e7f27 imx: ahab: Fix compiler warnings in printf
arch/arm/mach-imx/imx8/ahab.c:110:63: warning: format ‘%x’ expects
argument of type ‘unsigned int’, but argument 2 has type ‘u64 {aka long
long unsigned int}’ [-Wformat=]

Fix those by using %llx

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06 15:31:36 +01:00
Oliver Graute
61eb1fe568 imx: clk: added IPG Clock for I2C on imx8qm
This patch fixes this clk issue on I2C on imx8qm

 => i2c bus
 Bus 3:  i2c@5a830000
 => i2c dev 3
 Setting bus to 3
 Failed to enable ipg clk
 Failure changing bus number (-524)

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-12-06 15:07:51 +01:00
Heiko Schocher
7a8d18da4b imx: aristainetos: enable U-Boot Environment variables protection
enable Environment protection with:

CONFIG_ENV_APPEND=y
CONFIG_ENV_WRITEABLE_LIST=y
CONFIG_ENV_ACCESS_IGNORE_FORCE

and add board specific env_get_location()
function.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06 15:07:40 +01:00
Heiko Schocher
68163c3bf0 arm: dts: aristainetos: sync with changes in linux
sync with comaptible changes in linux from
Krzysztof Kozlowski.

https://patchwork.kernel.org/project/linux-arm-kernel/patch/20200930190143.27032-12-krzk@kernel.org/

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06 15:07:35 +01:00
Heiko Schocher
015c026f7a imx6: add support for aristainetos2c_cslb board variant
add support for aristainetos2c_cslb board variant.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06 15:07:06 +01:00
Heiko Schocher
3cf02f5ffa imx6: remove not longer supported aristainetos boards
Removed aristainetos2, 2b, 2b-csl. This boards have been
recalled and destroyed.

Adapt board code to remove stuff not needed anymore.

Fix checkpatch warning, remove fdt_high and initrd_high
from default environment.

Signed-off-by: Heiko Schocher <hs@denx.de>
zu remove
2020-12-06 15:06:16 +01:00
Tom Rini
ee1e04558f Merge branch '2020-12-02-master-imports'
- Assorted minor fixes
2020-12-03 09:43:47 -05:00
Holger Brunck
a6cd384b9c km/common: remove CONFIG_MTD_CONCAT
This was used for a board which is not supproted anymore and can
therefore be dropped.

CC: Stefan Roese <sr@denx.de>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02 16:21:58 -05:00
Holger Brunck
4cb8a10f7e remove obsolete option CONFIG_JFFS2_CMDLINE
This option is obsolete since 2009 and can be removed globally.

CC: Stefan Roese <sr@denx.de>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02 16:21:58 -05:00
Michael Walle
382985675c mtd: spi-nor-ids: add Winbond W25Q32JW-IM flash
The Kontron SMARC-sAL28 board uses that flash.

This is the same change as in the linux commit f3418718c0ec ("mtd:
spi-nor: Add support for w25q32jwm").

Signed-off-by: Michael Walle <michael@walle.cc>
Reported-by: Leo Krueger <leo.krueger@zal.aero>
2020-12-02 16:21:58 -05:00
Heinrich Schuchardt
e405efcf4b MAINTAINERS: assign include/log.h
include/log.h belongs to LOGGING.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-02 16:21:58 -05:00
Heinrich Schuchardt
9e925d0c47 log: typos in include/log.h
Correct several typos.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-02 16:21:58 -05:00
AKASHI Takahiro
50efdf2c6f common: update: fix an "unused" warning against update_flash()
Since update_flash() is used only in update_tftp(), it should be
guarded with appropriate config options.

After the commit 3149e524fc, common/update.c will be built under
either CONFIG_UDATE_TFTP, CONFIG_DFU_TFTP or CONFIG_UPDATE_FIT.
Since CONFIG_UPDATE_FIT, hence fit_update(), doesn't rely on
update_flash(), the compiler may cause an "unused" warning if
CONFIG_UPDATE_FIT=y and CONFIG_UPDATE_TFTP=n and CONFIG_DFU_TFTP=n.

This is, for example, the case for sandbox defconfig where
EFI_CAPSULE_FIRMWARE_FIT is enabled for test purpose.

Fixes: 3149e524fc ("common: update: add a generic interface for FIT
       image")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-02 16:21:58 -05:00
Simon Glass
d211e0418f global_data: Fix comment for dm_driver_rt
This comment is in the wrong format, so reports an error with
'make htmldocs'. Fix it.

Fixes: a294ead8d2 ("dm: Use an allocated array for run-time device info")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-02 16:21:58 -05:00
Simon Glass
d61e784136 log: Fix comment for LOGC_BOOT
This comment is in the wrong format, so reports an error with
'make htmldocs'. Fix it.

Fixes: b73d61a556 ("x86: zimage: Add a little more logging")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-02 16:21:58 -05:00
Andy Shevchenko
3cbb026f17 linux/compat.h: Remove debug() from spin_lock_irqsave()
It seems nobody tested the debug() option in spin_lock_irqsave().
Currently, when #define DEBUG, it spoils the compiler with

In file included from drivers/usb/dwc3/gadget.c:18:
drivers/usb/dwc3/gadget.c: In function ‘dwc3_gadget_set_selfpowered’:
include/log.h:235:4: warning: ‘flags’ is used uninitialized in this function [-Wuninitialized]
  235 |    printf(pr_fmt(fmt), ##args); \
      |    ^~~~~~
drivers/usb/dwc3/gadget.c:1347:17: note: ‘flags’ was declared here
 1347 |  unsigned long  flags;
      |                 ^~~~~

and so on...
Drop useless debug() call to make compiler happy.

Fixes: 0c06db5983 ("lib, linux: move linux specific defines to linux/compat.h")
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-12-02 16:21:58 -05:00
Zhao Qiang
c2ba01c082 watchdog: sbsa: timeout should be in "millisecond"
timeout should be in "millisecond" instead of second,
so divided it by 1000 when calculate the load value.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
2020-12-02 16:21:58 -05:00
Richard Genoud
7e932ac790 fs/squashfs: sqfs_close/sqfs_read_sblk: set ctxt.sblk to NULL after free
This will prevent a double free error if sqfs_close() is called twice.

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-12-02 16:21:58 -05:00
Tom Rini
ab31883ae7 Minor bugfixes
-----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/FYSgRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreaQ7Af9GScewoTZPCadXHmBilFH5Z+fetKINuio
 rJNctzLxtq6OBzdjNkB7zU/29tuWDlFuMSoNbnHXyoezAgwCfssGz85G1Ecxl+pN
 pr/iQNXDe+7yfILE6DZGJz7oTCkBPT15nMOxXRdqzP2ZkC7GpDeHxThogbv5ceny
 EwYc3/aOvUk/v0eIUZoNewf4xbJQjrByYHfTjBB8C1NonYpCKvaXdyuOFllLREqE
 OLhcNaiRc8383WWKoHOuSN1foZEX5hbFzwJ/ZeLH/lD1bstQrGPoiFGBh+pq//Cv
 ETDqVua/1HE3fxFPwFeSEK4HKlGaR44Z0YPAWdlcG1af00B46VxhbQ==
 =bRhi
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-30nov20' of git://git.denx.de/u-boot-dm

Minor bugfixes
2020-12-02 11:36:51 -05:00
Tom Rini
80cbd731df - MIPS: octeon: fix allocation bug in DDR driver
- MIPS: octeon: fix init of gd->ram_size
 - MIPS: octeon: add support for Octeon boot header
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl/FLdEACgkQKPlOlyTy
 XBhQSA//cCP8/HBsgrQK8MHIbZedyzsSsaTUyKCTJUZXZAVEClwjFBY7Q2Ko1r89
 svq+UzRjUlPV/F1M73s6D5I15mXHv5PvNdtgi6g+WZqZ7LaMDxqre4JA20wpk5VY
 NyC76DOQ1pwMmutTOIJz7uQ4HnELna3ExdvTjpVb6S41KHHwBx8FbkJZopHWv8ME
 2e9JAaTfFdYfw7ikGSzhuCH6iPbaUFWrLHZ8QASJW2hntSu+48GHl9ONJGD9lrMD
 DyU2/2Jh+0V7pLWdWzOfBEYlp0X+zcJIOK0XHB8zYxLK3AptOhgX86JDZclrawhH
 IYQ0HpF49x5NKvjg7bb91hzMULApxURx2btCpqHs1Wm0p6fOt/IMvC5Czos/uSus
 bhIS9ZiAYUygaNTRPOmS3LMY3IAGkqayrKBJzaIjabyFmlm7JSKbGjQCprzsPdXN
 0XjW4I7Kcy2cuUA5LKiXjt4q+qyxuq1qH240aK8DSBHcjuQZyLe7JDqnM4ePR+Cn
 a4oDfIXGHS6t2+4sAk39UkCwMH+e8xtyShHYBDuGquEZU9tris/qieuEsvXnbDK8
 jWyA5iN8OvGMa9K0fvUk68pU38tJYEZVigu9kKd6DEuZx1uN1slJd8xqXFIuEXX9
 ajBzEAIHY7/U4blX5+vfTx6G5VKqMN9qeKujOC3opE4B9PzHCLc=
 =kJRO
 -----END PGP SIGNATURE-----

Merge tag 'mips-fixes-for-v2021.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips

- MIPS: octeon: fix allocation bug in DDR driver
- MIPS: octeon: fix init of gd->ram_size
- MIPS: octeon: add support for Octeon boot header
2020-11-30 21:45:25 -05:00
Michal Simek
a9e73d287b binman: Remove additional backslash
The origin patch didn't have this change and it was caused by manual
resolution where additional backslash was added.

Fixes: 6723b4c6ca ("binman: Call helper function binman_set_rom_offset() to fill offset")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-30 13:14:43 -07:00
Marek Vasut
e7e7e1093b dm: core: Fix incorrect flag check
The test should be checking whether $flags are non-zero and $drv_flags
contain specific flags, however these two sets of flags are separate,
and the two tests should be logically ANDed, not bitwise ANDed.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-30 13:14:43 -07:00
Alper Nebi Yasak
87d07ccc23 sandbox: cros_ec: Basic support for EC_CMD_GET_NEXT_EVENT
Since commit 6900797678 ("cros_ec: Support keyboard scanning with
EC_CMD_GET_NEXT_EVENT") the cros-ec-keyb driver has started using this
command, but the sandbox EC emulator does not recognize it and
continuously prints:

    ** Unknown EC command 0x67

This patch makes the sandbox driver send basic responses to the command,
but the response only supports keyboard scans for now.

The EC side of this command stores and returns events from a queue, and
returns -EC_RES_UNAVAILABLE when there are no new events. This should be
possible to implement by hooking into the SDL event queue (perhaps via
sandbox_sdl_poll_events). Implementing that is a bit harder to do since
the existing sandbox code is discarding pending keyboard events, then
reading the current keyboard state.

Since the EC emulator never explicitly fails to work on this command,
the fallback to the older command will not trigger and will not be
tested anymore.

Fixes: 6900797678 ("cros_ec: Support keyboard scanning with EC_CMD_GET_NEXT_EVENT")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-30 13:14:43 -07:00
Simon Glass
f31e83d6cf binman: Handle tool paths containing '~' correctly
At present if CROSS_COMPILE contains a tilde, such as
~/.buildman-toolchains/gcc-7.3.0-nolibc/i386-linux/bin/i386-linux-gcc
then binman gives a confusing error:

   binman: Error 255 running '~/..buildman-toolchains/gcc-7.3.0- ...

Fix this by expanding it out before running the tool.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-30 13:14:43 -07:00
Tom Rini
0719bf4293 Prepare v2021.01-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 13:09:42 -05:00
Tom Rini
53def460d2 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 12:50:32 -05:00
Stefan Roese
540a2bcec1 mips: octeon: tools: Add update_octeon_header tool
Add a tool to update or insert an Octeon specific header into the U-Boot
image. This is needed e.g. for booting via SPI NOR, eMMC and NAND.

While working on this, move enum cvmx_board_types_enum and
cvmx_board_type_to_string() to cvmx-bootloader.h and remove the
unreferenced (unsupported) board definition.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:32:09 +01:00
Stefan Roese
b7eac19a3d mips: octeon: bootoctlinux: Use gd->ram_size instead of ram_get_info()
Using ram_get_info() is complicated and does not work after relocation.
Now that gd->ram_size holds the full RAM size, let's use it instead and
remove the ram_get_size logic completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:31:56 +01:00
Stefan Roese
8bab2c893c mips: octeon: Report full DDR size in dram_init() to gd->ram_size
With this patch, gd->ram_size now holds to full RAM size detected by the
DDR init code. It introduces the get_effective_memsize() function to
report the maximum usable RAM size in U-Boot to the system instead.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:31:56 +01:00
Stefan Roese
8a138257dd mips: octeon: Fix Octeon DDR driver to use the correct struct
Don't use "platdata_auto_alloc_size" but "priv_auto_alloc_size" instead
to auto allocate the private data struct, which is referenced via
dev_get_priv() in this driver. This fixes an ugly bug detected while
trying to boot via SPI NOR.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:31:56 +01:00
Stefan Roese
de24bc7e0e mips: start.S: Add Octeon boot header compatibility
Octeon has a specific boot header, when booted via SPI NOR, NAND or MMC.
Here the only 2 instructions are allowed in the first few bytes of the
image. And these instructions need to be one branch and a nop. This
patch adds the necessary nop after the nop, to that the common MIPS
image is compatible with this Octeon header.

The tool to patch the Octeon boot header into the image will be send in
a follow-up patch.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:31:56 +01:00
Tom Rini
a7ab4b71d5 Merge tag 'mmc-2020-11-29' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- mmc minor update for better debug and error check
- fsl_esdhc sysctl set and make sure delay check for HS400
2020-11-29 11:12:59 -05:00