Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 22:33:18 +00:00
Code Issues Projects Releases Packages Wiki Activity
1341 commits 24 branches 545 tags 332 MiB
Commit graph

587 commits

Author SHA1 Message Date
Markus Klotzbücher
ac7d97dcbb Turned on SDRAM scrubbing. 2006-03-06 18:47:44 +01:00
Markus Klotzbücher
43638c674a Cleanup of NAND support of delta board using the Monahans Data Flash 
Controller.
 2006-03-06 15:04:25 +01:00
Markus Klotzbücher
f9e029184b NAND finally working. Two bugs fixed: 
* For READ_STATUS and READID commands always 8 bytes need to be read from
   NDDB. Otherwise they stay there and get send to flash as the first data
   word when writing.

 * In nand_base.c the oob variable is not reset so this->oob_buf is
   overwritten what eventually screws up the bad block descriptor table.
 2006-03-06 13:45:42 +01:00
Markus Klotzbücher
bf7cac033b Lots of new stuff: 
* Debug message can be turned on and off.
 * Waiting for events now times out.
 * Implemented RESET command.
 * Added appropriate nand_bbt_descriptor and nand_oobinfo.

Remaining Problems:
 * Read Status still behaves weird an returns invalid stuff sometimes.
 * ECC Placement does not respect our scheme in nand_oobinfo.
 2006-03-04 18:35:51 +01:00
Markus Klotzbücher
00c35bd214 Added GPIO initialization of DF signal. Still not working. 2006-02-28 22:51:01 +01:00
Markus Klotzbücher
6949328d7d First steps implementing NAND support. Not working, fails to read ID. 2006-02-28 18:05:25 +01:00
Markus Klotzbücher
0377dca227 Merge /home/tur/nand/u-boot/ 
This is a first version of the testing-NAND branch merged back to main.
 2006-02-24 14:16:31 +01:00
Markus Klotzbücher
7d4d1ce48c Merge branch 'master' of http://www.denx.de/git/u-boot 2006-02-24 11:34:34 +01:00
Bartlomiej Sieka
038ccac511 Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling. 2006-02-24 09:37:22 +01:00
Markus Klotzbücher
599f52253a SDRAM now working. 2006-02-22 17:48:43 +01:00
Markus Klotzbücher
ff3c2a9478 SDRAM now working for delta board, but there are still aliasing problems, 
we only see 64MB.
 2006-02-22 14:05:44 +01:00
Wolfgang Denk
6624b687bc Rename SMMACO4 board into smmaco4 for consistency with Linux. 2006-02-22 10:25:39 +01:00
Wolfgang Denk
5f0be01356 Disable CMD_BSP for SMMACO4 board. 2006-02-22 02:39:31 +01:00
Wolfgang Denk
9cdc838613 Merge with /home/hs/PanDacom/u-boot-dev 2006-02-22 01:59:13 +01:00
Wolfgang Denk
654c2d2836 Merge with /home/sr/git/u-boot 2006-02-21 16:41:43 +01:00
Heiko Schocher
075866d840 [Patch] Add basic support for the SMMACO4 Board from PanDaCom. 
Signed-off-by: Heiko Schocher <hs@denx.de>
 2006-02-20 17:34:12 +01:00
Markus Klotzbücher
4f7a0e3671 New board directory and config for the benq delta board (copied from 
zylonite). Minor pxa-regs.h update.
 2006-02-20 16:37:37 +01:00
Markus Klotzbücher
8fb1857b40 Merged and added more pxa-regs.h stuff, especially the GPIO Control 
Register Definitions.
 2006-02-20 15:59:07 +01:00
Markus Klotzbücher
57dc57f14d Merged sufficient changes to pxa-regs.h in order to make u-boot compile. 
It doesn't run yet.
 2006-02-19 16:03:49 +01:00
Markus Klotzbücher
6ece03f267 Config updated for compiling the SMC911111 network driver 2006-02-10 17:08:26 +01:00
Markus Klotzbücher
b3c36e6b94 basic u-boot is working, boots into the command shell. 2006-02-09 13:19:25 +01:00
Stefan Roese
79830d591a Convert CPCI750 to use common CFI flash driver 
Patch by Reinhard Arlt, 8 Feb 2006
 2006-02-08 15:54:15 +01:00
Markus Klotzbücher
af646e865f Forgot to add files to zylonite branch. 2006-02-07 20:48:45 +01:00
Stefan Roese
48a05a5188 Various changes to esd HH405 board specific files 
Patch by Matthias Fuchs, 07 Feb 2006
 2006-02-07 16:51:04 +01:00
Wolfgang Denk
84e106c09d Update default environment for INKA4x00 board. 2006-02-07 15:18:25 +01:00
Stefan Roese
a7b9fb9110 Add VGA support (CT69000) to CPCI750 board. 
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().

Patch by Reinhard Arlt, 30 Dec 2005
 2006-01-18 20:05:34 +01:00
Stefan Roese
2076d0a15f PMC405 and CPCI405: Moved configuration of pci resources into config file. 
PMC405 and CPCI2DP: Added firmware download and booting via pci.

Patch by Matthias Fuchs, 20 Dec 2005
 2006-01-18 20:03:15 +01:00
Wolfgang Denk
c4b465f63e Fix 28F256J3A support on PM520 board 
(without bank-switching only 32 MB can be accessed)
 2006-01-13 17:00:56 +01:00
Wolfgang Denk
c7428d49ac Add support for 28F256J3A flah (=> 64 MB) on PM520 board 2005-12-29 15:12:09 +01:00
Marian Balakowicz
3a7b142b62 Change port configuration for O2DNT (CODEC1 on PSC1) 2005-12-06 20:33:07 +01:00
Wolfgang Denk
f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
Wolfgang Denk
4a86d779ff Merge with /home/sr/git/u-boot 2005-12-01 01:38:13 +01:00
Wolfgang Denk
b6f8435664 Adjust TQM834x PHY addresses for latest hardware revision. 2005-12-01 01:17:24 +01:00
Wolfgang Denk
d00de23b15 Increase malloc arena on TQM5200 board to 256 kB. 
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
 2005-12-01 00:55:19 +01:00
Stefan Roese
d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked: 
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
 2005-11-30 13:06:40 +01:00
Stefan Roese
6e7fb6eaa5 Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. 
Patch by John Otken, 23 Nov 2005
 2005-11-29 18:18:21 +01:00
Marian Balakowicz
0a69b26ed6 Increase IPB and PCI clocks for O2DNT board. 2005-11-27 20:15:41 +01:00
Stefan Roese
3d9569b232 Changed PPC44x startup message (cpu info, speed...) to common style: 
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.

Patch by Stefan Roese, 27 Nov 2005
 2005-11-27 19:36:26 +01:00
Stefan Roese
5568e613ee Add support for Prodrive P3P440 board: 
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
  for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
 2005-11-22 13:20:42 +01:00
Wolfgang Denk
fe126d8b34 Change all '$(...)' variable references into '${...}' 
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
 2005-11-20 21:40:11 +01:00
Stefan Roese
c7911c7e8f Merge with /server/home/stefan/git/u-boot/bamboo-sdram 2005-11-15 16:23:41 +01:00
Stefan Roese
fd49bf0214 Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM) 
Patch by Stefan Roese, 15 Nov 2005
 2005-11-15 16:04:58 +01:00
Stefan Roese
feaedfcf84 New PPC 405EP board added: CMS700 
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
 2005-11-15 10:35:59 +01:00
Stefan Roese
ea339205a9 Updated PCI mapping for esd CPCI2DP board. 
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
 2005-11-08 09:00:09 +01:00
Wolfgang Denk
4d03a21f23 Adjust TQM85x PHY addresses for latest hardware revision. 2005-11-03 11:31:36 +01:00
Wolfgang Denk
5d4ee51061 Merge with /home/m8/git/u-boot 2005-10-29 23:45:04 +02:00
Marian Balakowicz
63ff004c4f Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
Wolfgang Denk
7b5cac0e19 Merge with /home/wd/git/u-boot/master 2005-10-21 22:41:25 +02:00
Stefan Roese
1e25f957c8 Add NetConsole Support for AMCC eval boards 
Patch by Stefan Roese, 20 Oct 2005
 2005-10-20 16:34:28 +02:00
Rafal Jaworowski
6902df56a0 Add PCI support for the TQM834x board. 2005-10-17 02:39:53 +02:00