Commit graph

99 commits

Author SHA1 Message Date
Heiko Stuebner
fdf0819afb rsa: fix alignment issue when getting public exponent
To fill the exponent field of the rsa_public_key struct, rsa_mod_exp_sw
did a cast to uint64_t of the key_prop->public_exponent field.
But that alignment is not guaranteed in all cases.

This came to light when in my spl-fit-signature the key-name exceeded
a certain length and with it the verification then started failing.
(naming it "integrity" worked fine, "integrity-uboot" failed)

key_prop.public_exponent itself is actually a void-pointer, fdt_getprop()
also just returns such a void-pointer and inside the devicetree the 64bit
exponent is represented as 2 32bit numbers, so assuming a 64bit alignment
can lead to false reads.

So just use the already existing rsa_convert_big_endian() to do the actual
conversion from the dt's big-endian to the needed uint64 value.

Fixes: fc2f4246b4 ("rsa: Split the rsa-verify to separate the modular exponentiation")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07 09:01:42 -04:00
Tom Rini
1f47e2aca4 Xilinx changes for v2020.07
common:
 - Align ENV_FAT_INTERFACE
 - Fix MAC address source print log
 - Improve based autodetection code
 
 xilinx:
 - Enable netconsole
 
 Microblaze:
 - Setup default ENV_OFFSET/ENV_SECT_SIZE
 
 Zynq:
 - Multiple DT updates/fixes
 - Use DEVICE_TREE environment variable for DTB selection
 - Switch to single zynq configuration
 - Enable NOR flash via DM
 - Minor SPL print removal
 - Enable i2c mux driver
 
 ZynqMP:
 - Print multiboot register
 - Enable cache commands in mini mtest
 - Multiple DT updates/fixes
 - Fix firmware probing when driver is not enabled
 - Specify 3rd backup RAM boot mode in SPL
 - Add SPL support for zcu102 v1.1 and zcu111 revA
 - Redesign debug uart enabling and psu_init delay
 - Enable full u-boot run from EL3
 - Enable u-boot.itb generation without ATF with U-Boot in EL3
 
 Versal:
 - Enable distro default
 - Enable others SPI flashes
 - Enable systems without DDR
 
 Drivers:
 - Gem:
   - Flush memory after freeing
   - Handle mdio bus separately
 - Watchdog:
   - Get rid of unused global data pointer
   - Enable window watchdog timer
 - Serial:
   - Change reinitialization logic in zynq serial driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXoxw9wAKCRDKSWXLKUoM
 IbQxAKCK23yTy4FoN8oTGTYsbmLOA9kVUQCbBx8lg4nBeA8ihSaAnY+HMDF37YI=
 =Lg54
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.07

common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code

xilinx:
- Enable netconsole

Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE

Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver

ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3

Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR

Drivers:
- Gem:
  - Flush memory after freeing
  - Handle mdio bus separately
- Watchdog:
  - Get rid of unused global data pointer
  - Enable window watchdog timer
- Serial:
  - Change reinitialization logic in zynq serial driver

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07 17:13:35 -04:00
Simon Glass
72188f5462 image: Use constants for 'required' and 'key-name-hint'
These are used in multiple places so update them to use a shared #define.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-04-01 07:45:09 -06:00
AKASHI Takahiro
0cc7a7535f lib: rsa: add rsa_verify_with_pkey()
This function, and hence rsa_verify(), will perform RSA verification
with two essential parameters for a RSA public key in contract of
rsa_verify_with_keynode(), which requires additional three parameters
stored in FIT image.

It will be used in implementing UEFI secure boot, i.e. image authentication
and variable authentication.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-12 08:20:39 -04:00
AKASHI Takahiro
e0d310b098 lib: rsa: generate additional parameters for public key
In the current implementation of FIT_SIGNATURE, five parameters for
a RSA public key are required while only two of them are essential.
(See rsa-mod-exp.h and uImage.FIT/signature.txt)
This is a result of considering relatively limited computer power
and resources on embedded systems, while such a assumption may not
be quite practical for other use cases.

In this patch, added is a function, rsa_gen_key_prop(), which will
generate additional parameters for other uses, in particular
UEFI secure boot, on the fly.

Note: the current code uses some "big number" routines from BearSSL
for the calculation.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-03-12 08:20:39 -04:00
AKASHI Takahiro
dd89f5b0fd rsa: add CONFIG_RSA_VERIFY_WITH_PKEY config
In the next couple of commits, under new CONFIG_RSA_VERIFY_WITH_PKEY,
rsa_verify() will be extended to be able to perform RSA decryption without
additional RSA key properties from FIT image, i.e. rr and n0inv.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-12 08:20:39 -04:00
AKASHI Takahiro
b983cc2da0 lib: rsa: decouple rsa from FIT image verification
Introduce new configuration, CONFIG_RSA_VERIFY which will decouple building
RSA functions from FIT verification and allow for adding a RSA-based
signature verification for other file formats, in particular PE file
for UEFI secure boot.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-12 08:20:38 -04:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Daniele Alessandrelli
0772a1f497 rsa: Return immediately if required-key verification fails
Currently, if image verification with a required key fails, rsa_verify()
code tries to find another key to verify the FIT image. This however, is
not the intended behavior as the documentation says that required keys
"must be verified for the image / configuration to be considered valid".

This patch fixes the issue by making rsa_verify() return immediately if
the verification of a required key fails.

Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
2019-10-15 08:40:03 -06:00
Vesa Jääskeläinen
5b123e0109 lib: rsa: add support to other openssl engine types than pkcs11
There are multiple other openssl engines used by HSMs that can be used to
sign FIT images instead of forcing users to use pkcs11 type of service.

Relax engine selection so that other openssl engines can be specified and
use generic key id definition formula.

Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Cc: Tom Rini <trini@konsulko.com>
2019-07-18 11:31:23 -04:00
Philippe Reynes
b02f2e79c6 rsa: check that pointer checksum isn't NULL before using it
The pointer checksum were used before checking that it
isn't NULL. We move the code that use it after the check.

Reported-by: Coverity (CID: 185835)
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-25 11:44:12 -04:00
Philippe Reynes
061daa0b61 rsa: add support of padding pss
We add the support of the padding pss for rsa signature.
This new padding is often recommended instead of pkcs-1.5.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03 10:44:10 -05:00
Philippe Reynes
20031567e1 rsa: add a structure for the padding
The rsa signature use a padding algorithm. By default, we use the
padding pkcs-1.5. In order to add some new padding algorithm, we
add a padding framework to manage several padding algorithm.
The choice of the padding is done in the file .its.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03 10:44:10 -05:00
Philippe Reynes
3b5d6979fc rsa: use new openssl API to create signature
Previous implementation of the rsa signature was using
the openssl API EVP_Sign*, but the new openssl API
EVP_DigestSign* is more flexible. So we move to this
new API.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03 10:44:10 -05:00
Caliph Nomble
7ac1a432a1 rsa: Fix LibreSSL before v2.7.0
Fix LibreSSL compilation for versions before v2.7.0.

Signed-off-by: Caliph Nomble <nomble@palism.com>
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
2018-08-13 14:03:57 -04:00
Siva Durga Prasad Paladugu
37e3a36a54 xilinx: zynq: Add support to secure images
This patch basically adds two new commands for loadig secure
images.
1. zynq rsa adds support to load secure image which can be both
   authenticated or encrypted or both authenticated and encrypted
   image in xilinx bootimage(BOOT.bin) format.
2. zynq aes command adds support to decrypt and load encrypted
   image back to DDR as per destination address. The image has
   to be encrypted using xilinx bootgen tool and to get only the
   encrypted image from tool use -split option while invoking
   bootgen.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:54 +02:00
Simon Glass
8a682e03d7 rsa: Fix missing memory leak on error in fdt_add_bignum()
Thsi function can fail without freeing all its memory. Fix it.

Reported-by: Coverity (CID: 131217)
Signed-off-by: Simon Glass <sjg@chromium.org>
2018-06-19 07:31:44 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Eugeniu Rosca
39883af3f0 lib/rsa: Kconfig: Remove superfluous 'depends on RSA'
RSA_SOFTWARE_EXP and RSA_FREESCALE_EXP are wrapped inside:

if RSA
	...
endif

So, remove the redundant "depends on RSA" from their depends expression.
In addition, move SPL_RSA into the same "if RSA ... endif" block, since
its only direct dependeny is CONFIG_RSA. This tidies up and simplifies
reading of lib/rsa/Kconfig.

No functional change intended.

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-28 10:42:35 -04:00
Jelle van der Waa
c3b4328166 rsa: Fix build with OpenSSL 1.1.x
The rsa_st struct has been made opaque in 1.1.x, add forward compatible
code to access the n, e, d members of rsa_struct.

EVP_MD_CTX_cleanup has been removed in 1.1.x and EVP_MD_CTX_reset should be
called to reinitialise an already created structure.
2017-05-12 08:37:19 -04:00
George McCollister
f4e9ff7135 Kconfig: Don't use RSA_FREESCALE_EXP on IMX
The CAAM in IMX parts doesn't support public key hardware acceleration
(PKHA), so don't use RSA_FREESCALE_EXP. If you try to use it on IMX
(assuming you have the clocks enabled first) you will get back an
"Invalid KEY Command" error since PKHA isn't a valid key destination for
these parts.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-03-20 18:04:42 -04:00
George McCollister
f1ca1fdebf mkimage: Add support for signing with pkcs11
Add support for signing with the pkcs11 engine. This allows FIT images
to be signed with keys securely stored on a smartcard, hardware security
module, etc without exposing the keys.

Support for other engines can be added in the future by modifying
rsa_engine_get_pub_key() and rsa_engine_get_priv_key() to construct
correct key_id strings.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
2017-01-14 16:47:13 -05:00
Andrew Duda
83dd98e012 image: Combine image_sig_algo with image_sign_info
Remove the need to explicitly add SHA/RSA pairings. Invalid SHA/RSA
pairings will still fail on verify operations when the hash length is
longer than the key length.

Follow the same naming scheme "checksum,crytpo" without explicitly
defining the string.

Indirectly adds support for "sha1,rsa4096" signing/verification.

Signed-off-by: Andrew Duda <aduda@meraki.com>
Signed-off-by: aduda <aduda@meraki.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21 14:07:31 -05:00
Andrew Duda
0c1d74fda7 image: Add crypto_algo struct for RSA info
Cut down on the repetition of algorithm information by defining separate
checksum and crypto structs. image_sig_algos are now simply pairs of
unique checksum and crypto algos.

Signed-off-by: Andrew Duda <aduda@meraki.com>
Signed-off-by: aduda <aduda@meraki.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21 14:07:31 -05:00
Andrew Duda
da29f2991d rsa: Verify RSA padding programatically
Padding verification was done against static SHA/RSA pair arrays which
take up a lot of static memory, are mostly 0xff, and cannot be reused
for additional SHA/RSA pairings. The padding can be easily computed
according to PKCS#1v2.1 as:

  EM = 0x00 || 0x01 || PS || 0x00 || T

where PS is (emLen - tLen - 3) octets of 0xff and T is DER encoding
of the hash.

Store DER prefix in checksum_algo and create rsa_verify_padding
function to handle verification of a message for any SHA/RSA pairing.

Signed-off-by: Andrew Duda <aduda@meraki.com>
Signed-off-by: aduda <aduda@meraki.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21 14:07:30 -05:00
Andrew Duda
5300a4f933 rsa: cosmetic: rename pad_len to key_len
checksum_algo's pad_len field isn't actually used to store the length of
the padding but the total length of the RSA key (msg_len + pad_len)

Signed-off-by: Andrew Duda <aduda@meraki.com>
Signed-off-by: aduda <aduda@meraki.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21 14:07:30 -05:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
mario.six@gdsys.cc
713fb2dcb2 tools, rsa: Further minor cleanups on top of c236ebd and 2b9ec7
[NOTE: I took v1 of these patches in, and then v2 came out, this commit
is squashing the minor deltas from v1 -> v2 of updates to c236ebd and
2b9ec76 into this commit - trini]

- Added an additional NULL check, as suggested by Simon Glass to
  fit_image_process_sig
- Re-formatted the comment blocks

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
[For merging the chnages from v2 back onto v1]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-25 12:01:36 -04:00
mario.six@gdsys.cc
2b9ec762c4 rsa: Fix return value and masked error
When signing images, we repeatedly call fit_add_file_data() with
successively increasing size values to include the keys in the DTB.

Unfortunately, if large keys are used (such as 4096 bit RSA keys), this
process fails sometimes, and mkimage needs to be called repeatedly to
integrate the keys into the DTB.

This is because fit_add_file_data actually returns the wrong error
code, and the loop terminates prematurely, instead of trying again with
a larger size value.

This patch corrects the return value by fixing the return value of
fdt_add_bignum, fixes a case where an error is masked by a unconditional
setting of a return value variable, and also removes a error message,
which is misleading, since we actually allow the function to fail. A
(hopefully helpful) comment is also added to explain the lack of error
message.

This is probably related to 1152a05 ("tools: Correct error handling in
fit_image_process_hash()") and the corresponding error reported here:

https://www.mail-archive.com/u-boot@lists.denx.de/msg217417.html

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-07-22 14:46:24 -04:00
Teddy Reed
51c14cd128 verified-boot: Minimal support for booting U-Boot proper from SPL
This allows a board to configure verified boot within the SPL using
a FIT or FIT with external data. It also allows the SPL to perform
signature verification without needing relocation.

The board configuration will need to add the following feature defines:
CONFIG_SPL_CRYPTO_SUPPORT
CONFIG_SPL_HASH_SUPPORT
CONFIG_SPL_SHA256

In this example, SHA256 is the only selected hashing algorithm.

And the following booleans:
CONFIG_SPL=y
CONFIG_SPL_DM=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_SPL_OF_LIBFDT=y
CONFIG_SPL_FIT_SIGNATURE=y

Signed-off-by: Teddy Reed <teddy.reed@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Acked-by: Sumit Garg <sumit.garg@nxp.com>
2016-06-12 13:14:58 -04:00
Simon Glass
73223f0e1b Kconfig: Move CONFIG_FIT and related options to Kconfig
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:07 -04:00
gaurav rana
ccf288612f rsa : Compile Modular Exponentiation files based on CONFIG_RSA_SOFTWARE_EXP
Remove dependency of rsa_mod_exp from CONFIG_FIT_SIGNATURE.
As rsa modular exponentiation is an independent module
and can be invoked independently.

Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-05 12:04:59 -08:00
Ruchika Gupta
b37b46f042 rsa: Use checksum algorithms from struct hash_algo
Currently the hash functions used in RSA are called directly from the sha1
and sha256 libraries. Change the RSA checksum library to use the progressive
hash API's registered with struct hash_algo. This will allow the checksum
library to use the hardware accelerated progressive hash API's once available.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Fixed build error in am335x_boneblack_vboot due to duplicate CONFIG_DM)

Change-Id: Ic44279432f88d4e8594c6e94feb1cfcae2443a54
2015-01-29 17:09:59 -07:00
Ruchika Gupta
d9f23c7fe2 lib/rsa: Add Kconfig for devices supporting RSA Modular Exponentiation
Kconfig option added for devices which support RSA Verification.
1. RSA_SOFTWARE_EXP
Enables driver for supporting RSA Modular Exponentiation in Software
2. RSA_FREESCALE_EXP
Enables driver for supporting RSA Modular Exponentiation using Freescale specific
driver

The above drivers use RSA uclass

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Removed duplicate line in Kconfig comment)

Change-Id: I7663c4d5350e2bfc3dfa2696f70ef777d6ccc6f6
2015-01-29 17:09:59 -07:00
Ruchika Gupta
c937ff6dc2 lib/rsa: Modify rsa to use DM driver
Modify rsa_verify to use the rsa driver of DM library .The tools
will continue to use the same RSA sw library.

CONFIG_RSA is now dependent on CONFIG_DM. All configurations which
enable FIT based signatures have been modified to enable CONFIG_DM
by default.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:58 -07:00
Ruchika Gupta
fc2f4246b4 rsa: Split the rsa-verify to separate the modular exponentiation
Public exponentiation which is required in rsa verify functionality is
tightly integrated with verification code in rsa_verify.c. The patch
splits the file into twp separating the modular exponentiation.

1. rsa-verify.c
- The file parses device tree keys node to fill a keyprop structure.
The keyprop structure can then be converted to implementation specific
format.
(struct rsa_pub_key for sw implementation)
- The parsed device tree node is then passed to a generic rsa_mod_exp
function.

2. rsa-mod-exp.c
Move the software specific functions related to modular exponentiation
from rsa-verify.c to this file.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:58 -07:00
Simon Glass
5426716231 rsa: Fix two errors in the implementation
1. Failure to set the return code correctly
2. Failure to detect the loop end condition when the value is equal to
the modulus.

Reported-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-09 11:17:04 -04:00
Michael van der Westhuizen
e0f2f15534 Implement generalised RSA public exponents for verified boot
Remove the verified boot limitation that only allows a single
RSA public exponent of 65537 (F4).  This change allows use with
existing PKI infrastructure and has been tested with HSM-based
PKI.

Change the configuration OF tree format to store the RSA public
exponent as a 64 bit integer and implement backward compatibility
for verified boot configuration trees without this extra field.

Parameterise vboot_test.sh to test different public exponents.

Mathematics and other hard work by Andrew Bott.

Tested with the following public exponents: 3, 5, 17, 257, 39981,
50457, 65537 and 4294967297.

Signed-off-by: Andrew Bott <Andrew.Bott@ipaccess.com>
Signed-off-by: Andrew Wishart <Andrew.Wishart@ipaccess.com>
Signed-off-by: Neil Piercy <Neil.Piercy@ipaccess.com>
Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Cc: Simon Glass <sjg@chromium.org>
2014-08-09 11:17:01 -04:00
Jeroen Hofstee
2b9912e6a7 includes: move openssl headers to include/u-boot
commit 18b06652cd "tools: include u-boot version of sha256.h"
unconditionally forced the sha256.h from u-boot to be used
for tools instead of the host version. This is fragile though
as it will also include the host version. Therefore move it
to include/u-boot to join u-boot/md5.h etc which were renamed
for the same reason.

cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-06-19 11:19:04 -04:00
Simon Glass
597a8b2c68 mkimage: Automatically expand FDT in more cases
The original code did not cover every case and there was a missing negative
sign in one case. Expand the coverage and fix the bug.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-19 11:18:56 -04:00
Simon Glass
4f427a421f fdt: Update functions which write to an FDT to return -ENOSPC
When writing values into an FDT it is possible that there will be
insufficient space. If the caller gets a useful error then it can
potentially deal with the situation.

Adjust these functions to return -ENOSPC when the FDT is full.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-11 16:25:46 -04:00
Heiko Schocher
29a23f9d6c tools, fit_check_sign: verify a signed fit image
add host tool "fit_check_sign" which verifies, if a fit image is
signed correct.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2014-03-21 16:40:38 -04:00
Heiko Schocher
db1b5f3d20 rsa: add sha256,rsa4096 algorithm
Add support for sha256,rsa4096 signatures in u-boot.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: andreas@oetken.name
2014-03-21 16:39:35 -04:00
Heiko Schocher
646257d1f4 rsa: add sha256-rsa2048 algorithm
based on patch from andreas@oetken.name:

http://patchwork.ozlabs.org/patch/294318/
commit message:
I currently need support for rsa-sha256 signatures in u-boot and found out that
the code for signatures is not very generic. Thus adding of different
hash-algorithms for rsa-signatures is not easy to do without copy-pasting the
rsa-code. I attached a patch for how I think it could be better and included
support for rsa-sha256. This is a fast first shot.

aditionally work:
- removed checkpatch warnings
- removed compiler warnings
- rebased against current head

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: andreas@oetken.name
Cc: Simon Glass <sjg@chromium.org>
2014-03-21 16:39:34 -04:00
Masahiro Yamada
164922bd7c lib: descend into sub directories only when it is necessary
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-17 14:11:30 -05:00
Masahiro Yamada
0a1a157558 lib: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:26:44 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Andreas Bießmann
1a260fe3ef lib/rsa/rsa-sig.c: compile on OS X
Interfaces exposed by error.h seems not to be used in rsa-sig.c, remove it.
This also fixes an compile error on OS X:

---8<---
u-boot/lib/rsa/rsa-sign.c:23:19: error: error.h: No such file or directory
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Tested-by: Lubomir Popov <lpopov@mm-sol.com>
2013-07-03 09:35:30 -04:00
Simon Glass
19c402afa2 image: Add RSA support for image signing
RSA provides a public key encryption facility which is ideal for image
signing and verification.

Images are signed using a private key by mkimage. Then at run-time, the
images are verified using a private key.

This implementation uses openssl for the host part (mkimage). To avoid
bringing large libraries into the U-Boot binary, the RSA public key
is encoded using a simple numeric representation in the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:18:56 -04:00