2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-20 10:13:09 +00:00
Commit graph

7599 commits

Author SHA1 Message Date
Heinrich Schuchardt
34f2577e92 ARM: renesas: reduce rcar3_salvator-x image size
rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit.

Disable support for Unicode capitalization.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07 18:36:55 +01:00
Simon Glass
e16c47fa3d efi: Create a 64-bit app
Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app
that runs under that. Add a (non-functional) build for this.

Note that --whole-archive causes the gcc 9.2 linker to crash, so disable
this for now. Once this is resolved, things should work.

For now, avoid mentioning the documentation for the 64-bit app, since it
does not work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07 18:36:55 +01:00
Simon Glass
815ef1ca1d efi: Enable DM_ETH for the app
There is no need to avoid driver model for networking. Drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07 18:36:55 +01:00
Tom Rini
ce5bae5ccd configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 15:31:59 +00:00
Tom Rini
5523afbe4a Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_EARLY_INIT_F
   CONFIG_BOARD_LATE_INIT
   CONFIG_DISPLAY_BOARDINFO
   CONFIG_DISPLAY_BOARDINFO_LATE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:26:29 -04:00
Tom Rini
1616626417 Convert CONFIG_SPL_DRIVERS_MISC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_DRIVERS_MISC
   CONFIG_SPL_ENV_SUPPORT
   CONFIG_SPL_GPIO
   CONFIG_SPL_I2C
   CONFIG_SPL_LDSCRIPT
   CONFIG_SPL_LIBCOMMON_SUPPORT
   CONFIG_SPL_LIBGENERIC_SUPPORT
   CONFIG_SPL_LOAD_FIT_ADDRESS
   CONFIG_SPL_MMC
   CONFIG_SPL_NAND_SUPPORT
   CONFIG_SPL_NO_CPU_SUPPORT
   CONFIG_SPL_OS_BOOT
   CONFIG_SPL_POWER
   CONFIG_SPL_STACK_R
   CONFIG_SPL_STACK_R_ADDR
   CONFIG_SPL_WATCHDOG
   CONFIG_SPL_TEXT_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:26:29 -04:00
Tom Rini
4ca10b9ee5 Convert CONFIG_BMP_16BPP to Kconfig
This converts the following to Kconfig:
   CONFIG_BMP_16BPP

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
4d7a3f52d0 Convert CONFIG_OF_EMBED to Kconfig
This converts the following to Kconfig:
   CONFIG_OF_EMBED

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-05 11:23:29 -04:00
Tom Rini
74337aa450 Convert CONFIG_MCFUART to Kconfig
This converts the following to Kconfig:
	CONFIG_MCFUART

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
61e1972e73 Convert CONFIG_FEC_MXC to Kconfig
This converts the following to Kconfig:
	CONFIG_FEC_MXC

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
bca1bce92a Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig
This converts the following to Kconfig:
	CONFIG_SUPPORT_EMMC_BOOT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00
Tom Rini
b8bfe05282 - add sm efuse write support and cmd for read/write efuse
- add JetHub D1 eth mac generation with manufacturer OUI
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmGA+fwACgkQd9zb2sjI
 SdGGmg/+JNrKt/9yJ5giKwklLMEzSccKG23lQA2bZiYCP3I8j3t6spkHvHRRfgbX
 ZJIZjz9zhJ4bvaoiVa64fWoSxx8LpFDnTA1yQugDMxci9djXs2lnq1OdB3t9H4y3
 duy4+9U8H0lgpQosZwtLeI2FJvEnkrPlWyUAV9oMoFnyCllfjj0DfGqu9wm7mBlS
 q4VMBBVi3z8fhEs/lBoQ0psRHhfqY3ztI7PUCk1j15QSzaEt2RgNFYuVWW9QLi5f
 C0PB7/3mh004N6WkjrThT310dKoRNrTA30n4svnZDAtRkeligHe4krJBgJGWy0hk
 i6b4Cg1DPWVi5gfsyWsdO4nqJ2SEvmeGJ6EWPkzk3WxvHzVLj0+xBLIEhG+QgLgF
 GyoUhsy+crxmEmmE2NXpCnu0hZ+ouldGJXLqC+s/cy1dsXMtBgBfqbz8sfCSP2Qu
 w+FqpnwzAFBALB6DoA51Y/yxBwNTs9TtMRnR1kH99Gu7ekcNSZDCuLrrASp1+NiT
 axOQFJtopEuPTqBzR7Z/7NV5KjVMhUC9znQEHBmbmIKzr/27go0QF/267E4yEXlS
 fi1b0uPGSN+lfSwL2jau/CxRCFJmfTtI6flrkN7dBYWGYc98b1ISxa8U9OnJj/EA
 eYywK2BfzL5F2jKVCemJ441riImCZcrnIToWevnWUCLJV07LIcE=
 =UyL3
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20211102' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- add sm efuse write support and cmd for read/write efuse
- add JetHub D1 eth mac generation with manufacturer OUI
2021-11-02 08:56:42 -04:00
Tom Rini
9802154a94 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
Tom Rini
e63a3130e9 Merge https://source.denx.de/u-boot/custodians/u-boot-sh
- rzg2_beacon updates
2021-10-31 12:47:35 -04:00
Dzmitry Sankouski
3e2095e960 board: samsung: add support for Galaxy A series of 2017 (a5y17lte)
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones.
U-boot can be used as chain-loaded bootloader to gain control
on booting vanilla linux(and possibly others) kernels

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31 11:25:39 -04:00
Dzmitry Sankouski
80565ec6f0 board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone,
for China \ Hong Kong markets.
Has unlockable bootloader, unlike SM-G960U (American market version),
which allows running u-boot as a chain-loaded bootloader.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2021-10-31 11:25:38 -04:00
Mark Kettenis
3dfef53610 arm: dts: apple: Add preliminary device trees
Add preliminary device trees for the Apple M1 mini (2020) and
Apple M1 Macbook Pro 13" (2020).  Device tree bindings for
the Apple M1 SoC are still being formalized and these device
trees will be synchronized with the Linux kernel as needed.

The device trees in this commit are based on the initial Apple
M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl,
pmgr, usb based on bindings on track for inclusion in Linux
5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and
watchdog that don't have a proposed binding yet.

These device trees are provided as a reference only as U-Boot
uses the device tree passed by the m1n1 bootloader.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 08:46:44 -04:00
Mark Kettenis
d520e1fb72 serial: s5p: Add Apple M1 support
Apple M1 SoCs include an S5L UART which is a variant of the S5P
UART.  Add support for this variant and enable it by default
on Apple SoCs.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 08:46:44 -04:00
Mark Kettenis
003b657edc arm: apple: Add initial support for Apple's M1 SoC
Add support for Apple's M1 SoC that is used in "Apple Silicon"
Macs.  This builds a basic U-Boot that can be used as a payload
for the m1n1 boot loader being developed by the Asahi Linux
project.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add MAINTAINERS entry]
2021-10-31 08:46:44 -04:00
Mark Kettenis
fb57462437 test: Add tests for IOMMU uclass
Add a set of tests for the IOMMU uclass.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 08:46:44 -04:00
Adam Ford
16f1f00589 ARM: rmobile: Rename r8a774a1_beacon_defconfig to rzg2_beacon_defconfig
Now that the three M/N/H variants can be built from one config,
rename the defconfig file to be more generic since it supports multiple
RZ/G2.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-30 22:54:07 +02:00
Adam Ford
8e8fb50a93 ARM: rmobile: Beacon: Remove dead code
There are a few do-nothing functions that can be removed.
Remove them.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29 21:52:20 +02:00
Adam Ford
cde373f04f ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/H
Now that TARGET_BEACON_RZG2M can handle all the work that
was done with TARGET_BEACON_RZG2N and TARGET_BEACON_RZG2H,
remove them since they just create more duplicate code.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29 21:52:19 +02:00
Adam Ford
0d115694ab ARM: rmobile: beacon: Support RZ/G2 [M/N/H] on TARGET_BEACON_RZG2M
The three different boards share the same board file and only differ
in terms of which SoC is being used.  By enabling FIT on
TARGET_BEACON_RZG2M, it can support all three boards and elimate
duplicate code.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29 21:51:54 +02:00
Vyacheslav Bocharov
4f4f974a46 ARM: amlogic: add JetHub D1 eth mac generation with manufacturer OUI
JetHome has own MAC OUI. Add jethub-j100 board file. Update config.

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-29 19:16:07 +02:00
Ilias Apalodimas
e7fb789612 sandbox: Remove OF_HOSTFILE
OF_HOSTFILE is used on sandbox configs only.  Although it's pretty
unique and not causing any confusions,  we are better of having simpler
config options for the DTB.

So let's replace that with the existing OF_BOARD.  U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-27 16:38:26 -04:00
Tom Rini
35a7677e38 u-boot-imx-20211022
-------------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561
 
 - i.MX8:
 	- Toradex Verdin (switch to binman, cleanup, etc.)
 	- Phytec phycore_imx8mm (fixes, boot from SPI-NOR)
 	- fixes for imx8mp_evk
 - doc (i.MX): MX8MM with Fast boot
 - i.MX6:
 	- Toradex : colibri-imx6ull with eMMC, fixes
 - i.MX7ULP :
 	- preparation for OPTEE + Serial Number
 - generic:
 	- imx8m_image: Support ddr3 firmware
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYXat2A8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZMQQCeO3RELcie75bMjKbazAYLcfXvmm0AniuuWM/0
 gtxxC0ObQue2LpkQMAVU
 =plVt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20211022' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20211022
-------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561

- i.MX8:
	- Toradex Verdin (switch to binman, cleanup, etc.)
	- Phytec phycore_imx8mm (fixes, boot from SPI-NOR)
	- fixes for imx8mp_evk
- doc (i.MX): MX8MM with Fast boot
- i.MX6:
	- Toradex : colibri-imx6ull with eMMC, fixes
- i.MX7ULP :
	- preparation for OPTEE + Serial Number
- generic:
	- imx8m_image: Support ddr3 firmware
2021-10-25 09:54:36 -04:00
Tom Rini
f055f2e5a2 Pull request for efi-2022-01-rc1
Documentation:
 	Use Sphinx 3.43.
 	Move system reset documentation to HTML
 
 UEFI:
 	Fix linking EFI apps with LLVM
 	Fix alignment of loaded image
 	Correct simple network protocol test
 	Code cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEK7wKXt3/btL6/yA+hO4vgnE3U0sFAmFyqecACgkQhO4vgnE3
 U0vdwA//Vwg4q3fbMB/FeoI4cbdSJl1+IYnPdbZC1+TAnyv9kLuPlYON54GMwBo5
 K4qbvuzn8clAohJUPjUqPJumFLSzUqdVxCKqg4gFxfufTSH8T+LvmcooSbZW3y6d
 S4lgybbg5i5cwhi141sbL3wxQibNeFDhY3aIA6v8cKYtH+37MDFsTJ4rwq93r+bF
 cZlN6vHPZsklgTs66jJnlZs809ECH/3+BurM3+NQBz+AJFpKhxIpHkE/He16Yt/t
 6vLBfux4iRYF8OtEP1/7pPu4NKXfXOE3MkGTTzoYAiG7LM3kIuGn+De2dY/Z3CGE
 6WXTt7trzkwW1z1sXafMFFiV8n0Gj/ubDLTD3X9AVVWvp7LAIJmcU8dx79C0eKzJ
 HWHZqwAl4ZYlaxUbf7n/C6Mlhjnis0WUNiqc/OSgGhVmn4HeOOgrjVted3uvvm/9
 enR2HlSqibF8KOzcZec5fsPt9GxS/ZlGcUKMiYO1+wKbM+EQG0bz0v2uiers/U8o
 ixurj0Hj0tJEvaOEcHCQH99ug2PKpFDysOPc31lOrmg8jfD1Bxq728UWxfFYDSmI
 2cxv3G8K65imCrI7eTMTDG3AmdF142CET7MzNOMUlwcnqCskax2UhPVncXJdvFlT
 z00DdMF5Z6/gHfIYGu7KRt1MZ/yBWJOjt8J78ttIo40o1jJP4Rk=
 =EhtP
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-01-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-01-rc1

Documentation:
	Use Sphinx 3.43.
	Move system reset documentation to HTML

UEFI:
	Fix linking EFI apps with LLVM
	Fix alignment of loaded image
	Correct simple network protocol test
	Code cleanup
2021-10-22 12:43:30 -04:00
Ye Li
b65dc989a7 imx8mp_evk: Enable the DWC EQoS iMX driver
Enable the EQoS i.MX driver in defconfig, also enable the PHYLIB
to facilitate the case that only has FEC enabled.

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-10-21 13:59:26 +02:00
Stefano Babic
5fac11e6d5 Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21 13:58:13 +02:00
Tom Rini
f200a4bcec Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Turris MOX and Omnia changes, mostly moving to Kconfig (Marek)
- a37xx: pci: Misc smaller fixes (Pali)
- cmd: tlv_eeprom: Fix building with DEBUG enabled (Sven)
- termios_linux.h: Fix tcsendbreak() implementation (Pali)
- mvebu: Add missing "if SPL" (Tom)
2021-10-21 07:52:15 -04:00
Marek Behún
999ac22b59 arm: mvebu: a3720: Create Kconfig option for I2C_MV
Move the config option CONFIG_I2C_MV to a Kconfig option
CONFIG_SYS_I2C_MV and move the default definition from config header
files into defconfigs.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00
Marek Behún
3c36d745a8 arm: mvebu: turris_mox: Move options to defconfig
Move config options CONFIG_LAST_STAGE_INIT and
CONFIG_DISPLAY_BOARDINFO_LATE to turris_mox_defconfig.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00
Heinrich Schuchardt
6b7b9ff14d configs: add mkeficapsule to tools-only_defconfig
mkeficapsule is used to create capsules for UEFI firmware update.
To ease inclusion into U-Boot tools packages of Linux distributions we
should add it to the tools-only_defconfig.

Provide dummy values for CONFIG_AVB_BUF_ADDR, CONFIG_AVB_BUF_SIZE to
satisfy Kconfig.

Suggested-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-21 03:46:03 +02:00
Tom Rini
79b8849d4c u-boot-imx-20211020
-------------------
 
 First PR from u-boot-imx for 2022.01
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535
 
 - new board: kontron-sl-mx8mm
 - imx8m:
 	- fix secure boot
 - imx ESDHC: fixes
 - i.MX53: Support thum2, bmode and fixes for Menlo board
 	  usbarmory switch to Ethernet driver model
 - imx6 :
 	- DDR calibration for Toradex boards
 - imx7:
 	- Fixes
 - Updated gateworks boards (ventana / venice)
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYXAPLA8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZZdwCfQBZyd9IWYk3vY0lYgCZsBYl8oXoAn0o9BjVu
 tMJRAcFOLxegM4CJAeqC
 =zg72
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20211020' of https://source.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20211020
-------------------

First PR from u-boot-imx for 2022.01

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535

- new board: kontron-sl-mx8mm
- imx8m:
	- fix secure boot
- imx ESDHC: fixes
- i.MX53: Support thum2, bmode and fixes for Menlo board
	  usbarmory switch to Ethernet driver model
- imx6 :
	- DDR calibration for Toradex boards
- imx7:
	- Fixes
- Updated gateworks boards (ventana / venice)

# gpg verification failed.
2021-10-20 14:24:09 -04:00
Max Krummenacher
80ef6926e7 colibri-imx6ull: add emmc variant
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the
'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used
on other SKUs.

Related-to: ELB-4056, ELB-4057
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20 17:54:31 +02:00
Teresa Remmet
463a01c7e4 board: phytec: imx8mm-phycore: Switch to binman
Use binman for image creation.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20 15:10:13 +02:00
Teresa Remmet
454ea0e2c6 configs: phycore-imx8mm_defconfig: Enable clk command
Enable clk command to dump clock tree.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20 15:09:26 +02:00
Teresa Remmet
f38b1da8bb board: phytec: phycore-imx8mm: Add SPI-NOR flash support
Adds SPI-NOR flash support to erase, read and write in bootloader.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20 15:09:26 +02:00
Igor Opaniuk
e5505e9ebb verdin-imx8mm: use preboot for fdtfile evaluation
Enable and set preboot var with fdtfile evaluation.
It will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.

This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20 15:08:26 +02:00
Max Krummenacher
8da72960ed verdin-imx8mm: enable sleep_moci output
This powers some peripherals on the carrier board e.g. the USB hub.

Related-to: ELB-3206
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20 15:08:26 +02:00
Marcel Ziswiler
5cfa55930b verdin-imx8mm: switch to use binman to pack images
Use binman to pack images.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-20 15:08:26 +02:00
Stefano Babic
f0045799c6 imx8mm-cl-iot-gate-optee: align config with Kconfig
Due to missing configs, CI goes in deadlock until an OOM is tracked. Add
CONFIG_SYS_LOAD_ADDR and replace CONFIG_SYS_EXTRA_OPTIONS with
CONFIG_IMX_CONFIG.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
CC: Fabio Estevam <festevam@denx.de>
2021-10-20 12:13:44 +02:00
Stefano Babic
0105bda050 kontron-sl-mx8mm: fix missing configs and deadlock in CI
Even if board can be successfuly built, CI goes in deadlock (see thread
on https://www.mail-archive.com/u-boot@lists.denx.de/msg419663.html).
This is caused by SYS_CONFIG set in header file and because defconfig
for the board is out of sync with Kconfig. As result, buildman goes on
to read from stdin until an OOM is reached.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Frieder Schrempf <frieder.schrempf@kontron.de>
2021-10-20 11:55:25 +02:00
Amjad Ouled-Ameur
1860bdca6a configs: am335x_evm: enable CONFIG_CLK_TI_CTRL
This enables the clock controller driver support on TI's SoCs. This will
fix this GPIO issue at boot time:
request_and_set_gpio: Unable to request GPIO_PR1_MII_CTRL
request_and_set_gpio: Unable to request GPIO_MUX_MII_CTRL
request_and_set_gpio: Unable to request GPIO_FET_SWITCH_CTRL
request_and_set_gpio: Unable to request GPIO_PHY_RESET

This issue comes from the fact that the clock controller is not probed.

Enable the TI's clock controller driver support to solve this.

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2021-10-19 11:25:24 -04:00
Marek Vasut
521418daee ARM: imx: mx5: Enable Thumb2 build on MX53 Menlo board
Build U-Boot in Thumb2 mode for M53Menlo board, this makes better
use of the CPU since the instruction density is higher.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2021-10-19 12:36:51 +02:00
Marek Vasut
92f6718995 ARM: imx: mx5: Enable BMODE command on MX53 Menlo board
The board can do primary/secondary boot switching, enable the bmode command.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2021-10-19 12:36:50 +02:00
Ricardo Salveti
4d98af6996 board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfig
Move setting CONFIG_BOOTCOMMAND to the mx7ulp_com_defconfig file.
It also allows replacing the default CONFIG_BOOTCOMMAND without
code modification.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-19 10:51:39 +02:00
Fabio Estevam
9d8f87f0cd smegw01: Select IMX_HAB
Select IMX_HAB to allow secure boot.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19 10:51:39 +02:00
Fabio Estevam
04f423e41d smegw01: Add redundant environment support
Add redundant environment support as it is required
by SWUpdate.

While at it, place the CONFIG_ENV_OFFSET at 0x100000 to allow
more headroom.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19 10:51:39 +02:00