Commit graph

82647 commits

Author SHA1 Message Date
Patrick Delaunay
8921b3dccd arm: stm32mp: introduced read_close_status function in stm32key command
Split the read_hash_otp function and introduce the helper function
read_close_status to read the close status in OTP separately of the PKH.

This patch is a preliminary step for STM32MP13 support.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 14:28:25 +02:00
Patrick Delaunay
c6327ba40f arm: stm32mp: add defines for BSEC_LOCK status in stm32key command
Add defines for value used in stm32key for BSEC permanent lock status
and error.

This patch is a preliminary step to support more lock status in BSEC
driver.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 14:28:25 +02:00
Christophe Kerello
89f3745152 board: st: stm32mp1: use of correct compatible string to add partitions
Current compatible string used to update SPI NAND and SPI NOR devices
can lead to a wrong partitions update (for example, SPI NAND partitions
added to SPI NOR node in the device tree). To avoid this wrong behavior,
use jedec,spi-nor compatible string for SPI NOR devices and spi-nand
compatible string for SPI NAND devices.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 14:26:57 +02:00
Patrick Delaunay
450036f4ef stm32mp: stm32prog: improve the partitioning trace
Improve the partitioning trace done in command stm32prog:
- remove the trace "partition: Done" when the GPT partitioning is not done
- indicate the mmc instance used for each 'gpt write' command

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 14:25:29 +02:00
Patrick Delaunay
152498d580 ARM: dts: stm32mp: alignment with v6.0-rc3
Device tree alignment with Linux kernel v6.0-rc3:
- ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
- ARM: dts: stm32: Add alternate pinmux for RCC pin
- ARM: dts: stm32: Add alternate pinmux for DCMI pins
- ARM: dts: stm32: Add alternate pinmux for SPI2 pins
- ARM: dts: stm32: Fix SPI2 pinmux pin comments on stm32mp15
- ARM: dts: stm32: add optee reserved memory on stm32mp135f-dk
- ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13
- ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 14:05:04 +02:00
Patrick Delaunay
93b2d4d0bd stm32mp: stm32prog: correctly handle OTP when SMC is not supported
As the SMC is only supported in SP-MIN for STM32MP15x, the associated
partition should be absent when the TA NVMEM is not available in OPT-TEE
in STM32MP13x.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 13:58:20 +02:00
Patrick Delaunay
3df19b8bec stm32mp: stm32prog: solve warning for 64bits compilation
Solve many compilation warning when stm32prog is activated on the aarch64.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 13:58:20 +02:00
Patrick Delaunay
ada8fe0c42 stm32mp: stm32prog: change default flashlayout location to CONFIG_SYS_LOAD_ADDR
Change the defaut flashlayout location, hardcoded at STM32_DDR_BASE,
to CONFIG_SYS_LOAD_ADDR to avoid issue on board with reserved memory
at STM32_DDR_BASE.

This patch changes the command behavior for STM32MP13 and STM32MP15
platform, as CONFIG_SYS_LOAD_ADDR(0xc2000000) != STM32_DDR_BASE
but without impact for serial boot with STM32CubeProgrammer.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 13:58:20 +02:00
Patrick Delaunay
4d7df7f766 stm32mp: stm32prog: support empty flashlayout
When the STM32CubeProgrammer sent a empty flashlayout.tsv
file, the command stm32prog correctly parse the file
but data->dev_nb = 0 and the stm32prog_devices_init
operations should be skipped.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 13:58:20 +02:00
Tom Rini
435596d57f u-boot-imx-20220922
-------------------
 
 Fixes for 2022.10
 
 CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13548
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYyxtug8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76b0ZwCeJRJBAddhitBJvaAW48GqRMp4EqcAnizS4UzK
 D4B7j2skCEWJN/GmYVV/
 =o2se
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220922' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220922
-------------------

Fixes for 2022.10

CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13548
2022-09-22 10:29:29 -04:00
Fabio Estevam
1d8f4c85e3 kontron-sl-mx8mm: Let CONFIG_SPL_FIT_IMAGE_TINY be selected
When CONFIG_IMX_HAB is selected the 'hab_status' command reports several
error events, indicating that the BootROM failed to authenticate the SPL.

After inspecting the content of the memory location that corresponds to
the DTB load address, the content did not match with the DTB binary,
showing that some kind of memory corruption/overlap occurred.

Letting the CONFIG_SPL_FIT_IMAGE_TINY option to be selected causes the
DTB to be properly placed into RAM and no more overlap occurs.

With this change, the 'hab_status' command returns no more error events,
which indicates that the BootROM succeeded to authenticate the SPL.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-09-21 16:19:45 +02:00
Fabio Estevam
8b9d90d634 mx8m: csf.sh: Fix the calculation of fit_block_size
When running the script to sign SPL/U-Boot on a kontron-sl-mx8mm board,
the fit_block_size was calculated as 0x1000 instead of 0x1020.

Add an extra parenthesis pair to fix it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2022-09-21 16:19:45 +02:00
Tom Rini
179a9320c0 Fix futility bintool to run on newer distros
Apply a lost patch
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmMq3TARHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreY8oggAnQe34Gf/Smr2zQLY73ChSJduRbsMkaBW
 d9sN8RPmCUPo80n6oHT6M4rTS7pOH7aweX5ff9gEVneMxokHtGHIFA33f7dFhUH0
 bMyuc5P06TB1InIyezBttal+BDZjAM7IAsULvom6cDRt1UNmwP3+ond3QeZ2/k/T
 as8jCIOX79tKN3EHEc6IqU+WPRUJ/qIgCG4l4qcc8qaMCjVBiYj0UyEIpgR2cLnJ
 qMElUENRQLy5tXsEUEKBPDReVjwMnq213HpLZRl+vGaVE6t/dUalA51RVOfo67Hu
 ip7VUiRmUdUNoD2R2AvEVxDE7hNCIQo5Am0hkKUIMf6wHJDGXZmjQQ==
 =caHw
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-21sep22' of https://source.denx.de/u-boot/custodians/u-boot-dm

Fix futility bintool to run on newer distros
Apply a lost patch
2022-09-21 08:22:11 -04:00
Simon Glass
d64af08f19 binman: Get futility by building it
A binary download is not great, since it depends on libraries being
present in the system. Build futility from source instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-21 10:37:47 +02:00
Marek Vasut
13982ced2c cmd: fdt: Add support for reading stringlist property values
The fdt command currently handles stringlists as strings in 'fdt get value'
subcommand. Since strings in FDT stringlists are separated by '\0', only
the first value gets inserted into the environment variable passed to the
'fdt get value' command.

Example, consider the following DT snippet:

/ { compatible = "foo", "bar" };

The following command only reports the first string in stringlist:
=> fdt get value var / compatible ; print var
foo

It is not possible to assign list of null-terminated strings into U-Boot
environment variable. Add optional 'index' parameter to the subcommand
'fdt get value <var> <path> <prop> [<index>]' which lets user specify which
string within the stringlist should be assigned into the 'var' variable.
The default value of 'index' is 0 in case it is not present. This way the
'fdt' command API does not change and existing scripts are not broken.

The following command now reports the Nth string in stringlist, counting
from zero:
=> fdt get value var / compatible 1 ; print var
bar

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2022-09-21 10:37:46 +02:00
Michal Simek
2b1db7b18c arm64: zynqmp: Wire GEM reset gpio
With ethernet-phy-id driver ETH phy reset can be properly handle that's why
describe it in DT.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/5bfd92827033d19617113f4117f37dcf79699a0f.1662721547.git.michal.simek@amd.com
2022-09-21 09:55:19 +02:00
Michal Simek
13622c7a9d arm64: zynqmp: Describe TI phy as ethernet-phy-id
TI DP83867 is using strapping based on MIO pins. Tristate setup can influce
PHY address. That's why switch description with ethernet-phy-id compatible
string which enable calling reset. PHY itself setups phy address after
power up or reset. Reset description will be added in separate commit.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/52bf9ac0453d4e4896d8edd2618e684bb1ff6012.1662721547.git.michal.simek@amd.com
2022-09-21 09:55:19 +02:00
Michal Simek
0fb7fd865b xilinx: versal: Remove unused comments from xilinx_versal.h
Couple of options have been moved to Kconfig but comments stayed in header
that's why remove them.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ffaee826dcb6853825ac72db91bb3a682c42297d.1663575411.git.michal.simek@amd.com
2022-09-21 09:54:39 +02:00
Marek Vasut
fdf6bbb260 ARM: imx: Deduplicate i.MX8M SNVS LPGPR unlock
Pull this LPGPR unlock into common code, since it is used in multiple
systems already.

Signed-off-by: Marek Vasut <marex@denx.de>
2022-09-20 18:30:02 +02:00
Tim Harvey
9bf0cbf396 arm: dts: imx8mm-venice-gw7901: add dsa phy handles to u-boot dtsi
The upstream Linux DSA drivers do not require phy-handle nodes in
the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and
the mdio nodes to the u-boot.dtsi file so that future dts file
syncrhonization between Linux and U-Boot don't break networking.

Fixes: 24a7a3c1c0 ("imx8mm: synchronise device tree with linux")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-09-20 18:30:02 +02:00
Tim Harvey
1581f17378 arm: dts: imx8mp-venice-gw74xx: add dsa phy handles to u-boot dtsi
The upstream Linux DSA drivers do not require phy-handle nodes in
the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and
the mdio nodes to the u-boot.dtsi file so that future dts file
syncrhonization between Linux and U-Boot don't break networking.

Fixes: e0caa84ca6 ("imx8mp: synchronise device tree with linux")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-09-20 18:30:02 +02:00
Tom Rini
ebdd6afa54 Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-marvell into next
- Enable CONFIG_TIMER for all Kirkwood / MVEBU boards (Stefan)
- u-boot-spl.kwb/SPL: Add / improve size limit setup / detection (Pali)
- mvebu: theadorable: Misc updates in defconfig und dts (Stefan)
2022-09-20 08:50:07 -04:00
Tom Rini
245746e8e0 First set of u-boot-at91 features for the 2023.01 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmMoEdgcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyNvEB/4nEeiBx7Lo1gK+79PJ
 9kCUngglHRu3/+FJMpcOp+2b6sSW1IZs8qGBMAMFSRoFElrLMMbVEgBR0ZfJCl3c
 It0xN9Buhe8muwtAdE8Amr4PddUEynzglVPpFUFfir6ZqFAcedmN6iuh+K82r7Be
 7s/8tRb2hVp//TpkEntf2yxrYnyeW4qiXyUxbUhaUyyhkM3RBXySuY4qnaaLp3NY
 R9rsIY5j3kA2QylebEamlXI+KDvszrGbkUOUUrlwkygQNR/GmAYQPlY1TdBwk0wE
 U1CO8zQYaL3OY998lU32pMVClmwyXbn2i7KAyMm3TEgrfpjQsLTS2BK+w+RBdMGL
 XGnt
 =lRvM
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2023.01-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2023.01 cycle:

This feature set includes the important update on PIO4 pinctrl driver
that solves a long time mismatch between Linux and U-boot, related on
the unification of pinctrl and gpio driver support, now respecting the
pinctrl bindings ABI; and also support for pinctrl subnodes. The feature
set also adds support for PDA screen detection for sam9x60_curiosity
board , one fix for SD-Card reinsertion and one fix for sam9x60 clocks.
2022-09-20 08:49:36 -04:00
Stefan Roese
7a6102a613 kirkwood: lsxl: Sync defconfigs
With the recent changes in the Orion timer driver Kconfig setup, the
board specific enabling is not needed any more. This patch sync's these
2 boards with their current defconfig version.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Michael Walle <michael@walle.cc>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
b81db4bfdd arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot, dm-pre-reloc" to timer DT node
Adding the "u-boot,dm-pre-reloc" DT property to the timer node is
necesssary to support the timer in the early boot phases (e.g.
SPL & pre-reloc).

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
d06ba5cc71 arm: mvebu: dts: armada-375.dtsi: Add timer0 & timer1
Add the DT bindings / descriptions for timer0 & timer1, exactly as done
in mainline Linux.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
0cc5d2321f arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step
This patch changes the compilation, so that the Armada 375 board(s) are
compiled in a separate step. This is necessary for the timer dts
conversion, as A375 has a different / timer description in the dts.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
7b530bb19e arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms
Now that the new timer support is available for these platforms, let's
select this IF for all these platforms. This way it's not necessary
that each board changes it's config header.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
a68f13a3b6 timer: orion-timer: Add timer_get_boot_us() for BOOTSTAGE support
Add timer_get_boot_us() to support boards, that have CONFIG_BOOTSTAGE
enabled, like pogo_v4.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
89fd0cccf9 timer: orion-timer: Add support for other Armada SoC's
This patch adds support for other Marvell Armada SoC's, supporting the
25MHz fixed clock operation, like the Armada XP etc.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
50e4d8511d arm: mvebu: theadorable: Update eth & mdio DT nodes
With the recent changes in the Marvel mvneta network driver, the MDIO
bus is not connected any more. This patch updates the DT nodes to use
the nodes from the dtsi files instead of creating ad-hoc nodes.

Signed-off-by: Stefan Roese <sr@denx.de>
2022-09-20 06:39:43 +02:00
Stefan Roese
c686d35b43 arm: mvebu: theadorable: Misc defconfig changes
- Remove EFI support as it's not used on this board
- Disable CONFIG_FIT_PRINT to reduce the serial output (minimal speedup)

Signed-off-by: Stefan Roese <sr@denx.de>
2022-09-20 06:39:43 +02:00
Pali Rohár
4a08c26647 arm: mvebu: Add default SPL_SIZE_LIMIT for 32-bit SoCs
32-bit Marvell Armada BootROMs limit maximal size of SPL image to 192 kB.
So define 192 kB (= 0x30000) limit as default value for SPL_SIZE_LIMIT.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-20 06:39:43 +02:00
Pali Rohár
5138c8fa56 arm: mvebu: turris_omnia: Add CONFIG_BOARD_SIZE_LIMIT
Maximal size of u-boot kwb image binary is $CONFIG_ENV_OFFSET which is
0xF0000 = 983040 bytes. So add missing CONFIG_BOARD_SIZE_LIMIT definition
to ensure that u-boot binary does not overflow to the u-boot env storage.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-20 06:39:43 +02:00
Pali Rohár
d285e4b080 Makefile: Add missing CONFIG_BOARD_SIZE_LIMIT check for u-boot-spl.kwb
Currently CONFIG_BOARD_SIZE_LIMIT check is ignored for u-boot-spl.kwb
target. Fix it by adding missing $(BOARD_SIZE_CHECK) macro.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-20 06:39:43 +02:00
Tom Rini
12ed6d4911 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
- Fix a typo and remove an unused driver
2022-09-19 16:49:18 -04:00
Tom Rini
e9a1ff9724 Merge branch 'master' into next
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-19 16:07:12 -04:00
Tom Rini
f76f3e3b44 Prepare v2022.10-rc5
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-19 12:17:04 -04:00
Marek Vasut
c34edb893a usb: gadget: designware-udc: Drop the driver
This driver is not used by any system and is long unmaintained, drop it.
There is a DWC2 OTG driver which is maintained, see CONFIG_USB_GADGET_DWC2_OTG .

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-19 17:45:51 +02:00
Fabio Estevam
c6ab91c77e usb: Kconfig: Fix typo in SPL_DM_USB text
Change a typo in "USB host mode".

Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-09-19 17:45:51 +02:00
Tom Rini
ddcd2e8fb3 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-19 11:22:26 -04:00
Tim Harvey
59f6141362 imx8m*_venice_defconfig: fix default bootcmd
commit 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
had an unintended side effect of resulting in a bootcmd env var change
for boards like venice that did not have CONFIG_USE_BOOTCOMMAND defined
and relied on it being defaulted in include/config_distro_bootcmd.h.
Following that patch it instead got defaulted in tools/env/fw_env_private.h

Fix this by enabling CONFIG_USE_BOOTCOMMAND for venice.

Fixes: commit 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-09-19 08:53:50 -04:00
Tom Rini
c1db6be55d u-boot-imx-20220919
-------------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500
 
 - Fix imx8mn-beacon-kit-u-boot
 - Merged Purism
 - imxrt1170 (already merged in u-boot-imx)
 - Fixes in crypto FSL
 - Toradex : fixes Verdin
 - Serial Driver: fixes when not used as console
 - DH Boards : fixes + USB
 - Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig)
 - Add imx6ulz_smm_m2
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYyhfUg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bBfgCgkthrxcVGFDRGMqA2B4OkWjM7RjYAn0jn9dqO
 F1jZNNtXpdwDVljS1Xtv
 =Rnxw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220919' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220919
-------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500

- Fix imx8mn-beacon-kit-u-boot
- Merged Purism
- imxrt1170 (already merged in u-boot-imx)
- Fixes in crypto FSL
- Toradex : fixes Verdin
- Serial Driver: fixes when not used as console
- DH Boards : fixes + USB
- Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig)
- Add imx6ulz_smm_m2
2022-09-19 08:38:32 -04:00
Marek Behún
a0759684e0 powerpc: mpc85xx: Fix incorrect application of patch
I messed up application of patch 5a428e7510 ("mmc: fsl_esdhc_spl: Add
support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS"). I took it from
a work-in-progress branch where I changed usage of
  CONFIG_SDCARD to CONFIG_SD_BOOT
and refactored
  SYS_MPC85XX_NO_RESETVEC
mess.

But these changes aren't in master yet. Fix the wrong usage of these
macros.

Fixes: 5a428e7510 ("mmc: fsl_esdhc_spl: Add support for builds without
CONFIG_SYS_MMC_U_BOOT_OFFS")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-09-19 08:30:58 -04:00
Sergiu Moga
7086defa04 pinctrl: at91-pio4: Add support for pinctrl config subnodes
Previously, in order for the `pinctrl-*` DT node properties
to be properly processed, the pinctrl's subnodes were limited
to only having the `pinmux` property as well as other additional
properties (slew-rate, bias-disable, etc.). Now, with this patch
the pinctrl driver is made to work similarly to the one from Linux.
It can now distinguish between one subnode and a subnode with multiple
subnodes.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2022-09-19 09:51:04 +03:00
Sergiu Moga
2ed96a87d2 pinctrl: at91-pio4: Bind GPIO driver to the pinctrl DT node
This has been done in order to align the DT of U-Boot with the DT
of Linux. In Linux, a phandle from a '-gpio' DT property is linked
to the pinctrl driver, a single driver that handles both pinctrl
settings and offers GPIO API to callers. On the other hand,
U-Boot redirects such phandle to a corresponding UCLASS_GPIO
driver, because U-Boot offers two different types of drivers
in this case: UCLASS_PINCTRL which handles pin functions and
UCLASS_GPIO which handles gpio requests as a gpio provider.
Due to this, we have two drivers in Uboot, but the Devicetree
has a single node. Thus, just one of the drivers can be probed
for the DT node during platform initialization, before relocation.

Our previous solution in U-Boot was to have a different devicetree:
the gpio node has a subnode for the pinctrl driver, which
is not compliant with Linux ABI. Furthermore, our documentation
for this type of nodes mentions no such gpio compatible.

After this patch, we can no longer add nodes with a gpio
compatible in the DT. Thus, in order to link the pinctrl driver to
the gpio one, a hook to the bind method of the former in U-Boot has
been added and the GPIO related compatibles have been removed to
avoid conflict when compatibles are enumerated and bound to drivers
during platform start before relocation. The bind method will attach
the GPIO driver to the pinctrl DT node so that every phandle coming
from '-gpio' DT properties will be redirected to a valid driver
attached to the pinctrl DT node.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2022-09-19 09:51:04 +03:00
Sergiu Moga
f02e52b7e6 ARM: dts: at91: sama7: Align with Linux Devicetree
This patch makes sure that the Devicetree for the sama7
boards are aligned with the Devicetree from Linux. This
implies removing the GPIO compatible and replacing it
with the PINCTRL one, as well as unifying the SDMMC
pinctrl related subnodes under one single subnode.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2022-09-19 09:51:04 +03:00
Sergiu Moga
2df729e96d ARM: dts: at91: sama5: Align with Linux Devicetree
This patch makes sure that the Devicetree for the sama5
boards are aligned with the Devicetree from Linux. This
implies removing the GPIO compatible and replacing it
with the PINCTRL one, as well as unifying the SDMMC
pinctrl related subnodes under one single subnode.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2022-09-19 09:51:04 +03:00
Mihai Sain
56ce54a97c clk: at91: sam9x60: change parent clock from mck_pres to mck_div
ddrck and qspick should have mck_div as parent clocks to be in sync with
linux driver.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-09-19 09:50:17 +03:00
Durai Manickam KR
3534672200 ARM: dts: at91: sam9x60_curiosity: add onewire support
Add support for onewire memory.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
2022-09-19 09:50:17 +03:00