Commit graph

720 commits

Author SHA1 Message Date
Kumar Gala
a179012e37 Added support for PCI prefetchable region and BARs
If a host controller sets up a region as prefetchable and
a device's BAR denotes it as prefetchable, allocate the
BAR into the prefetch region.

If a BAR is prefetchable and no prefetchable region has
been setup by the controller we fall back to allocating
the BAR into the normally memory region.
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:24:15 -06:00
Wolfgang Denk
c7428d49ac Add support for 28F256J3A flah (=> 64 MB) on PM520 board 2005-12-29 15:12:09 +01:00
Wolfgang Denk
97c8d0bbbd Add support for 28F256J3A flash chips 2005-12-22 01:50:50 +01:00
Marian Balakowicz
3a7b142b62 Change port configuration for O2DNT (CODEC1 on PSC1) 2005-12-06 20:33:07 +01:00
Wolfgang Denk
a889bd27ef Fix DPRAM offset/size for MPC8541/8555.
Simplify TQM85xx Makefile handling.
2005-12-06 15:02:31 +01:00
Wolfgang Denk
f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
Wolfgang Denk
4a86d779ff Merge with /home/sr/git/u-boot 2005-12-01 01:38:13 +01:00
Wolfgang Denk
b6f8435664 Adjust TQM834x PHY addresses for latest hardware revision. 2005-12-01 01:17:24 +01:00
Wolfgang Denk
d00de23b15 Increase malloc arena on TQM5200 board to 256 kB.
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
2005-12-01 00:55:19 +01:00
Marian Balakowicz
d9785c14bf Fix miiphy global data initialization (problem on 4xx boards when no
ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().

Based on initial patch for 4xx platform by Matthias Fuchs.
2005-11-30 18:06:04 +01:00
Stefan Roese
d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked:
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
Stefan Roese
6e7fb6eaa5 Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
Marian Balakowicz
0a69b26ed6 Increase IPB and PCI clocks for O2DNT board. 2005-11-27 20:15:41 +01:00
Stefan Roese
3d9569b232 Changed PPC44x startup message (cpu info, speed...) to common style:
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.

Patch by Stefan Roese, 27 Nov 2005
2005-11-27 19:36:26 +01:00
Wolfgang Denk
f08abe311b Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h 2005-11-25 16:38:03 +01:00
Stefan Roese
5568e613ee Add support for Prodrive P3P440 board:
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
  for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
Wolfgang Denk
fe126d8b34 Change all '$(...)' variable references into '${...}'
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
Stefan Roese
c7911c7e8f Merge with /server/home/stefan/git/u-boot/bamboo-sdram 2005-11-15 16:23:41 +01:00
Stefan Roese
fd49bf0214 Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
Patch by Stefan Roese, 15 Nov 2005
2005-11-15 16:04:58 +01:00
Stefan Roese
feaedfcf84 New PPC 405EP board added: CMS700
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
2005-11-15 10:35:59 +01:00
Stefan Roese
ea339205a9 Updated PCI mapping for esd CPCI2DP board.
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
2005-11-08 09:00:09 +01:00
Stefan Roese
182e10691f Correct PPC Timebase register definitions (SPRN_TBRL...)
Patch by Stefan Roese, 07 Nov 2005
2005-11-07 09:57:57 +01:00
Wolfgang Denk
4d03a21f23 Adjust TQM85x PHY addresses for latest hardware revision. 2005-11-03 11:31:36 +01:00
Stefan Roese
57275b69c6 Add support for Ocotea pass 3 with 440GX Rev. F
Patch by Stefan Roese, 01 Nov 2005
2005-11-01 10:08:03 +01:00
Wolfgang Denk
5d4ee51061 Merge with /home/m8/git/u-boot 2005-10-29 23:45:04 +02:00
Marian Balakowicz
63ff004c4f Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
Wolfgang Denk
7b5cac0e19 Merge with /home/wd/git/u-boot/master 2005-10-21 22:41:25 +02:00
Stefan Roese
1e25f957c8 Add NetConsole Support for AMCC eval boards
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:34:28 +02:00
Rafal Jaworowski
6902df56a0 Add PCI support for the TQM834x board. 2005-10-17 02:39:53 +02:00
Wolfgang Denk
ea1fba136a Merge with /home/sr/git/u-boot 2005-10-17 00:19:16 +02:00
Wolfgang Denk
84bd92bdda Merge with /home/m8/git/u-boot 2005-10-15 18:23:43 +02:00
Stefan Roese
3b6748ea0d Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo
Patch by Stefan Roese, 14 Oct 2005
2005-10-14 15:37:34 +02:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Wolfgang Denk
814d98f24e Add missing files for Pantelis Antoniou's patch
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:59:29 +02:00
Wolfgang Denk
cbdf8824fa Merge with /home/sr/git/u-boot 2005-10-13 01:55:58 +02:00
Wolfgang Denk
070610c529 Add support for OF flat tree for the STXtc board.
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:49:09 +02:00
Wolfgang Denk
f57f70aab9 Support passing of OF flat trees to the kernel.
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:45:54 +02:00
Marian Balakowicz
36247821ef Fix TQM834x config file, set correct value for CFG_IMMRBAR. 2005-10-12 12:45:04 +02:00
Marian Balakowicz
e6f2e90233 Added support for TQM834x boards. 2005-10-11 19:09:42 +02:00
Wolfgang Denk
3df5bea0b0 Add support for NetSilicon NS7520 processor.
Patch by Art Shipkowski, 12 May 2005

Cleanup.
2005-10-09 01:41:48 +02:00
Wolfgang Denk
7521af1c7d Add support for AP1000 board.
Patch by James MacAulay, 07 Oct 2005
2005-10-09 01:04:33 +02:00
Stefan Roese
c29ab9d71d Fix gzip bmp support (test if malloc fails, warning when truncated).
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
2005-10-08 10:19:07 +02:00
Wolfgang Denk
b8e16a3450 Cleanup 2005-10-06 23:44:55 +02:00
Wolfgang Denk
87cb6862b9 Update make target for ARM supported boards.
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
2005-10-06 17:08:18 +02:00
Wolfgang Denk
6ebc792114 Add JFFS2 support for TRAB board
Patch by Martin Krause, 25 Aug 2005
2005-10-06 01:46:57 +02:00
Wolfgang Denk
f5c254d719 Fix the machine-id of the Cogent csb637 board
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:26:16 +02:00
Wolfgang Denk
78da60773c Complete support for the KwikByte KB920x boards
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:22:22 +02:00
Wolfgang Denk
645da51097 Add support for Cogent csb637
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:00:09 +02:00
Wolfgang Denk
080bdb7f3a * Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
Patch by Anders Larsen, 29 Apr 2005

* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
  (8e2be51de8)
2005-10-05 01:51:29 +02:00
Wolfgang Denk
29ca46c445 Fix device partition intialization for SystemACE disks.
Patch by Stephen Williams, 28 Apr 2005
2005-10-05 00:25:17 +02:00