Commit graph

19 commits

Author SHA1 Message Date
Peng Fan
a07c718129 imx8mp: set BYPASS ID SWAP to avoid AXI bus errors
Set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to
generated AXI bus errors with TZC380 enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Peng Fan
625b03d810 imx: get cpu id/type of i.MX8MP
Support get i.MX8MP cpu id and cpu type

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Patrick Wildt
6a4b07e086 imx8m: fix rom version check to unbreak some B0 chips
Recently the version check was improved to be able to determine that
we're running on SoC revision 2.1.  A check for B0 was tightened so
that it now must equal 0x20 instead of being bigger than 0x20.  On
some B0 chips the value returned is 0x1020 instead of 0x20.  This
means even though it's B0, the check will fail and code relying on
the correct chip revision will make wrong decisions.  There is no
documentation of those bits, but it seems that NXP always uses a
byte to encode the revision.  Thus remove the upper bits to fix the
regression.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-12-09 11:52:06 +01:00
Simon Glass
9edefc2776 common: Move some cache and MMU functions out of common.h
These functions belong in cpu_func.h. Another option would be cache.h
but that code uses driver model and we have not moved these cache
functions to use driver model. Since they are CPU-related it seems
reasonable to put them here.

Move them over.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:55 -05:00
Peng Fan
cd7c806f4f imx: imx8m: fix boot when CONFIG_$(SPL_)CLK not defined
When CONFIG_$(SPL_)CLK not defined, the clock controller device
not exist, so to avoid boot failure for platform not have
CONFIG_$(SPL_)CLK, add a check.

Reviewed-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
b1821376ee imx8mn: add get_boot_device
No ROM INFO structure on iMX8MN, use new ROM API to get boot device
from ROM.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
deca6cfbf5 imx8mn: set BYPASS ID SWAP to avoid AXI bus errors
Set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to
generated AXI bus errors with TZC380 enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
2434131a7b imx8mn: support get_cpu_rev
Add a dummy cpu type and support get_cpu_rev for i.MX8MN

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
9e09445549 imx8m: imx8mq: get chip rev for B1 revision
The i.MX8MQ B1 uses OCOTP_HW_OCOTP_READ_FUSE_DATA register for chip id.
It returns a magic number 0xff0055aa. update get_cpu_rev to support it,
and enable ocotp clock to access ocotp.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Stefano Babic
d714a75fd4 imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB
CONFIG_SECURE_BOOT is too generic and forbids to use it for cross
architecture purposes. If Secure Boot is required for imx, this means to
enable and use the HAB processor in the soc.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-10-08 16:36:37 +02:00
Peng Fan
e663c703b1 imx8m: soc: probe clock device in arch_cpu_init_dm
Because we need to get cpu freq in print_cpuinfo at very early stage,
so we need to make sure the ccm be probed.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
d2041725e8 imx8m: restrict reset_cpu
Make reset_cpu only visible when CONFIG_SYSRESET not defined
or CONFIG_SPL_BUILD.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
0528ba0e1c imx8m: soc: enable SCTR clock before timer init
To i.MX8MM SCTR clock is disabled by ROM, so before timer init
need to enable it.
To i.MX8MQ, it does not hurt the clock is enabled again.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Ye Li
b3cf0a8f03 imx8m: Configure trustzone region 0 for non-secure access
Set trustzone region 0 to allow both non-secure and secure access
when trust zone is enabled. We found USB controller fails to access
DDR if the default region 0 is secure access only.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
dbb2b7e508 imx8m: set BYPASS ID SWAP to avoid AXI bus errors
set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to
generated AXI bus errors with TZC380 enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
59efa6b52b imx8m: Fix MMU table issue for OPTEE memory
When running with OPTEE, the MMU table in u-boot does not remove the OPTEE
memory from its settings. So ARM speculative prefetch in u-boot may access
that OPTEE memory. Due to trust zone is enabled by OPTEE and that memory
is set to secure access, then the speculative prefetch will fail and cause
various memory issue in u-boot.
The fail address register and int_status register in trustzone has logged
that speculative access from u-boot.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
78db9a5463 imx: add get_cpu_rev support for i.MX8MM
There are several variants based on i.MX8MM, add the support in
get_cpu_rev

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
702339bdf4 imx: i.MX8MQ: clear ocotp error bit
In case ocotp error bit is set, clear it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 19:16:24 +02:00
Peng Fan
cd357ad112 imx: rename mx8m,MX8M to imx8m,IMX8M
Rename mx8m,MX8M to imx8m,IMX8M

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jon Nettleton <jon@solid-run.com>
2019-01-01 14:12:18 +01:00
Renamed from arch/arm/mach-imx/mx8m/soc.c (Browse further)