Commit graph

89074 commits

Author SHA1 Message Date
Patrice Chotard
7132729100 configs: stm32f769-disco: Enable VIDEO_LOGO flag
The patch removes the legacy mode of displaying the ST logo and adopts
the approach introduced by the commit 284b08fb51 ("board: stm32mp1: add
splash screen with stmicroelectronics logo").

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
36ce1d5b23 Remove the hardcoded ST logo no longer in use
The patch removes the hardcoded ST logo from the code, as it is no
longer used.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
9192b13bc8 board: stm32f746-disco: refactor the display of the ST logo
The patch removes the legacy mode of displaying the ST logo and adopts
the approach introduced by the commit 284b08fb51 ("board: stm32mp1: add
splash screen with stmicroelectronics logo"). It was necessary to use a
specific logo for the stm32f746-disco board.

Furthermore, the previous version didn't properly center the logo, hiding
its upper part.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
20af6b897b configs: stm32f746-disco: limit resolution to 480x272
The patch fixes the y-resolution, which was causing the creation of a
framebuffer larger than actually needed, resulting in memory waste.

Fixes: cc1b0e7b8e ("board: Add display to STM32F746 SoC discovery board")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
1e4d99549f ARM: dts: stm32: support display on stm32f746-disco board
The patch applies the changes from Linux commit 10a970bc3ebfa ("ARM: dts:
stm32: support display on stm32f746-disco board") and removes the same
settings from stm32f746-disco-u-boot.dtsi.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
f0c76e7731 ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
commit e4e724099f04072053cf411456e3e9aae48c4af1 Linux upstream.

In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.

This patch is preparatory for future developments.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
92ddff674d ARM: dts: stm32: add pin map for LTDC on stm32f7
commit ba287d1a0137702a224b1f48673d529257b3c4bf Linux upstream.

Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
f479f5dbb7 ARM: dts: stm32: add ltdc support on stm32f746 MCU
The patch applies the changes from Linux commit 008ef8b3a1a00 ("Add LTDC
(Lcd-tft Display Controller) support") and removes the same settings
from stm32f746-disco-u-boot.dtsi.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
5b9e395726 ARM: dts: stm32: add touchscreen on stm32f746-disco board
commit f0215440069c4fb12958d2d321e05faa2708a11d Linux upstream.

The patch adds support for touchscreen on the stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
f37cf077ac ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
commit 0637e66f8250c61f75042131fcb7f88ead2ad436 Linux upstream.

Add pin configurations for using i2c3 controller on stm32f7.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
3175c73b04 ARM: dts: stm32: use RCC macro for CRC node on stm32f746
commit 7a5f349e592c254f3c1ac34665b6c3905576efc2 Linux upstream.

The patch replaces the number 12 with the appropriate numerical constant
already defined in the file stm32f7-rcc.h.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
a5fc0bebef ARM: dts: stm32: add CAN support on stm32f746
commit 0920ccdf41e3078a4dd2567eb905ea154bc826e6 Linux upstream.

Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The
chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral
configuration and CAN3 in single peripheral configuration:
- Dual CAN peripheral configuration:
  * CAN1: Primary bxCAN for managing the communication between a secondary
    bxCAN and the 512-byte SRAM memory.
  * CAN2: Secondary bxCAN with no direct access to the SRAM memory.
  This means that the two bxCAN cells share the 512-byte SRAM memory and
  CAN2 can't be used without enabling CAN1.
- Single CAN peripheral configuration:
  * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and
    512-byte SRAM memory.

 -------------------------------------------------------------------------
| features | CAN1              | CAN2               | CAN 3               |
 -------------------------------------------------------------------------
| SRAM     | 512-byte shared between CAN1 & CAN2    | 512-byte            |
 -------------------------------------------------------------------------
| Filters  | 26 filters shared between CAN1 & CAN2  | 14 filters          |
 -------------------------------------------------------------------------

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
3d82c74be7 ARM: dts: stm32: add pin map for CAN controller on stm32f7
commit 011644249686f2675e142519cd59e81e04cfc231 Linux upstream.

Add pin configurations for using CAN controller on stm32f7.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
e97aeda67f dt-bindings: mfd: stm32f7: Add binding definition for CAN3
commit 8f3ef556f8e1a670895f59ef3f01e4e26edd63e3 Linux upstream.

Add binding definition for CAN3 peripheral.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:01 +02:00
Heinrich Schuchardt
7cfdacbe80 configs: sifive: enable poweroff command on Unmatched
Powering off the SiFive HiFive Unmatched board is supported both via the
SBI and GPIO sysreset drivers. See device-tree entry

    compatible = "gpio-poweroff".

Enable the poweroff command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 18:23:59 +08:00
Yu Chien Peter Lin
8a0d5f2f51 riscv: andesv5: Prefer using the generic RISC-V timer driver in S-mode
The Andes PLMT driver directly accesses the mtime MMIO region,
indicating its intended use in the M-mode boot stage. However,
since U-Boot proper (S-mode) also uses the PLMT driver, we need
to specifically mark the region as readable through PMPCFGx (or
S/U-mode read-only shared data region for Smepmp) in OpenSBI.

Granting permission for this case doesn't make sense. Instead,
we should use the generic RISC-V timer driver to read the mtime
through the TIME CSR. Therefore, we add the SPL_ANDES_PLMT_TIMER
config, which ensures that the PLMT driver is linked exclusively
against M-mode U-Boot or U-Boot SPL binaries.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2023-10-04 18:23:54 +08:00
Randolph
5f25297637 configs: andes: rearrange SPL mode memory layout
Unify the memory layout for u-boot SPL mode
Add "CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS"

Signed-off-by: Randolph <randolph@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 18:03:02 +08:00
Randolph
b68bf22fbb configs: andes: add vender prefix for target name
Modify "CONFIG_TARGET_AE350" to "CONFIG_TARGET_ANDES_AE350"

Signed-off-by: Randolph <randolph@andestech.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-10-04 18:00:51 +08:00
Heinrich Schuchardt
e637e455ca riscv: enable CONFIG_DEBUG_UART by default
Most boards don't enable the pre-console buffer. So we will not see any
early messages. OpenSBI 1.3 provides us with the debug console extension
that can fill this gap.

For S-Mode U-Boot enable CONFIG_DEBUG_UART by default.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 17:59:49 +08:00
Heinrich Schuchardt
ef5ccaae64 cmd/exception: test RISC-V 16 bit aligned instruction
A 16 bit aligned instruction should generated an exception if the C
extension is not available.

Provide an 'extension ialign16' command for testing exception handling.

For testing build qemu-riscv64_defconfig with CONFIG_RISCV_ISA_C=n
and run with

    qemu-system-riscv64 -M virt -bios u-boot -nographic -cpu rv64,c=false

    => exception ialign16
    Unhandled exception: Instruction address misaligned
    EPC: 0000000087719138 RA: 0000000087719218 TVAL: 000000008771913e
    EPC: 0000000080020138 RA: 0000000080020218 reloc adjusted

    Code: 0113 0101 8067 0000 0113 ff01 3423 0011 (006f 0060)

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 17:59:43 +08:00
Heinrich Schuchardt
f2e4b9d3c2 cmd/exception: support RISC-V compressed instruction
Eliminating the C extension on application processors is under
discussion.

Support emitting a compressed instruction. This will lead to an
illegal instruction exception if the C extension is not implemented.

For testing build qemu-riscv64_defconfig with CONFIG_RISCV_ISA_C=n
and run with

    qemu-system-riscv64 -M virt -bios u-boot -nographic -cpu rv64,c=false

    => exception compressed
    Unhandled exception: Illegal instruction
    EPC: 0000000087731708 RA: 000000008773fe44 TVAL: 0000000000004501
    EPC: 000000008001b708 RA: 0000000080029e44 reloc adjusted

    Code: 0b93 0000 0493 0000 0993 0000 f06f ccdf (4501)

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 17:59:40 +08:00
Kuan Lim Lee
c202426d6a timer: starfive: Add Starfive timer support
Add timer driver in Starfive SoC. It is an timer that outside
of CPU core and inside Starfive SoC.

Signed-off-by: Kuan Lim Lee <kuanlim.lee@starfivetech.com>
Reviewed-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-10-04 17:59:31 +08:00
Chanho Park
6d78473b3d timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE
timer_get_boot_us function is required to record the boot stages as
us-based timestamp.
To get a micro-second time from a timer tick, this converts the
formula like below to avoid zero result of (tick / rate) part.

From: time(us) = (tick / rate) * 1000000
To  : time(us) = (tick * 1000) / (rate / 1000)

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 17:55:37 +08:00
Chanho Park
74fbd74ed2 riscv: timer: add timer_get_boot_us for BOOTSTAGE
timer_get_boot_us function is required to record the boot stages as
us-based timestamp.
To get a micro-second time from a timer tick, this converts the
formula like below to avoid zero result of (tick / rate) part.

From: time(us) = (tick / rate) * 1000000
To  : time(us) = (tick * 1000) / (rate / 1000)

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 17:55:20 +08:00
Chanho Park
9bcf9e49a2 riscv: bootstage: correct bootstage_report guard
Below warning can be occurred when CONFIG_BOOTSTAGE and
!CONFIG_SPL_BOOTSTAGE. It should be guarded by using CONFIG_IS_ENABLED
for SPL build.

arch/riscv/lib/bootm.c:46:9: warning: implicit declaration of
function 'bootstage_report'
   46 |         bootstage_report();
      |         ^~~~~~~~~~~~~~~~
      |         bootstage_error

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 17:55:17 +08:00
Tom Rini
65b9b3462b Merge branch 'next_pinctrl_sync' of https://source.denx.de/u-boot/custodians/u-boot-sh
- pinctrl re-sync for Renesas chips
2023-10-02 15:19:02 -04:00
Tom Rini
ec6f06bddc configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 13:58:20 -04:00
Tom Rini
ac897385bb Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 10:55:44 -04:00
Tom Rini
4459ed60cb Prepare v2023.10
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 10:39:59 -04:00
Tom Rini
ba6d575ee0 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 10:35:27 -04:00
Tom Rini
e29b932aa0 Merge branch '2023-09-30-Kconfig-updates' into next
- Migrate one symbol from CFG to CONFIG and move where another is.
2023-10-01 11:54:31 -04:00
Tom Rini
613949b79a Merge branch '2023-09-30-assorted-build-related-changes' into next
- Assorted build cleanups / changes
2023-10-01 11:54:16 -04:00
Marek Vasut
30c210b9be ARM: renesas: Align env eMMC device number with Linux 6.5.3 DT changes on R-Car Gen3 Salvator-X
Set U-Boot environment storage eMMC device number to 0, to match
the new additions to DT /aliases node pulled in alongside Linux
6.5.3 DT synchronization.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
2501fd979e ARM: dts: renesas: Synchronize RZ R8A774E1 RZ/G2H DTs with Linux 6.5.3
Synchronize RZ R8A774E1 RZ/G2H DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
be06fe57a3 ARM: dts: renesas: Synchronize RZ R8A774C0 RZ/G2E DTs with Linux 6.5.3
Synchronize RZ R8A774C0 RZ/G2E DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
6da842bbac ARM: dts: renesas: Synchronize RZ R8A774B1 RZ/G2N DTs with Linux 6.5.3
Synchronize RZ R8A774B1 RZ/G2N DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
7177dcf773 ARM: dts: renesas: Synchronize RZ R8A774A1 RZ/G2M DTs with Linux 6.5.3
Synchronize RZ R8A774A1 RZ/G2M DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
2023-10-01 00:08:29 +02:00
Marek Vasut
ec2faaab65 ARM: dts: renesas: Synchronize RZ R7S72100 RZ/A1 DTs with Linux 6.5.3
Synchronize RZ R7S72100 RZ/A1 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
90e6730808 ARM: dts: renesas: Synchronize R-Car R8A779G0 V4H DTs with Linux 6.5.3
Synchronize R-Car R8A779G0 V4H DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
9c61a0fdc2 ARM: dts: renesas: Synchronize R-Car R8A779F0 S4 DTs with Linux 6.5.3
Synchronize R-Car R8A779F0 S4 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
61128cff1d ARM: dts: renesas: Synchronize R-Car R8A779A0 E3 DTs with Linux 6.5.3
Synchronize R-Car R8A779A0 E3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
a9513a0ae5 ARM: dts: renesas: Synchronize R-Car R8A77995 D3 DTs with Linux 6.5.3
Synchronize R-Car R8A77995 D3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
a7be3fb54a ARM: dts: renesas: Synchronize R-Car R8A77990 E3 DTs with Linux 6.5.3
Synchronize R-Car R8A77990 E3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
f8c24dabda ARM: dts: renesas: Synchronize R-Car R8A77980 V3H DTs with Linux 6.5.3
Synchronize R-Car R8A77980 V3H DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
14fb8dc576 ARM: dts: renesas: Synchronize R-Car R8A77970 V3M DTs with Linux 6.5.3
Synchronize R-Car R8A77970 V3M DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
01e0e5e53d ARM: dts: renesas: Synchronize R-Car R8A77965 M3-N DTs with Linux 6.5.3
Synchronize R-Car R8A77965 M3-N DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
d1051fde6e ARM: dts: renesas: Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ DTs with Linux 6.5.3
Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
f984d3889c ARM: dts: renesas: Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3
Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
89932045ef ARM: dts: renesas: Synchronize R-Car R8A7794 E2 DTs with Linux 6.5.3
Synchronize R-Car R8A7794 E2 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
9ef28a83fe ARM: dts: renesas: Synchronize R-Car R8A7791 M2-W and R8A7793 M2-N DTs with Linux 6.5.3
Synchronize R-Car R8A7791 M2-W and R8A7793 M2-N DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00