Commit graph

33 commits

Author SHA1 Message Date
kevin.morfitt@fearnside-systems.co.uk
ac67804fbb Add a unified s3c24x0 header file
This patch adds a unified s3c24x0 cpu header file that selects the header
file for the specific s3c24x0 cpu from the SOC and CPU configs defined in
board config file. This removes the current chain of s3c24-type #ifdef's
from the s3c24x0 code.

Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-11-27 16:26:13 -06:00
kevin.morfitt@fearnside-systems.co.uk
d67cce2dda Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code
This patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in
preparation for changes to add support for the Embest SBC2440-II Board.

The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
  non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports

It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
any s3c2400 or s3c2410 boards but need this patch applying before I can submit
patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no
new warnings or errors were found.

Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-10-13 21:13:56 -05:00
Wolfgang Denk
9689ddcca6 cpu/arm920t/start.S: include <common.h> to have ROUND() defined
Commit fcd3c87e made include/common.h usable by assembler code but
failed to update cpu/arm920t/start.S

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-27 10:06:39 +02:00
Detlev Zundel
792a09eb9d Fix e-mail address of Gary Jennejohn.
Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-05-15 22:11:59 +02:00
Ulf Samuelsson
cb82a53266 Add support for the AT91RM9200EK Board.
The AT91RM9200-EK Evaluation Board supports the AT91RM9200
ARM9-based 32-bit RISC microcontroller and enables real-time code development
and evaluation.

Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507

with
	- NOR (cfi driver)
	- DataFlash
	- USB OHCI
	- Net
	- I2C (hard)

Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Jean-Christophe PLAGNIOL-VILLARD
ed3b18e05c AT91: remove non supported board AT91RM9200DF macro
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-12-02 21:59:29 +01:00
Wolfgang Denk
58c696eed8 AT91RM9200DK: fix broken boot from NOR flash
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-24 22:10:07 +01:00
Jens Scharsig
8052352f20 at91rm9200: fix broken boot from nor flash
This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
CONFIG_AT91RM9200 is defined and nor preloader is used.

Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
2008-11-24 22:10:04 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Andrew Dyer
6e1551a870 arm920t fix constant error in start.S
Code in cpu/arm920t/start.S will die with a compilation error if
CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
the ARM sub instruction.  Change the code so that each is subtracted
independently to avoid the error.

Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
2008-09-12 02:20:46 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Guennadi Liakhovetski
a6f0bd9f2b Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
Restore logic reverted by commit

commit 80767a6cea
Author: Peter Pearse <peter.pearse@arm.com>
Date:   Wed Sep 5 16:04:41 2007 +0100

    Changed API name to coloured_led.h
    Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
    Tidied other cpu/arm920t/start.S code

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-17 23:33:20 -07:00
Harald Welte
a25f72f1f7 ARM: arm920t: Allow use of 'gd' pointer from IRQ
This patch allows us to use the 'gd' pointer (and thus environment
and everything else associated with it) from interrupt context on
arm920t.

Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-02-04 23:50:54 +01:00
Peter Pearse
bd86220f58 Move coloured led API to status_led.h
Improve indentation in drivers/at45.c
2007-09-18 13:07:54 +01:00
Peter Pearse
d94c79e470 Final tidy 2007-09-11 15:35:01 +01:00
Peter Pearse
80767a6cea Changed API name to coloured_led.h
Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
Tidied other cpu/arm920t/start.S code
2007-09-05 16:04:41 +01:00
Peter Pearse
9f5c3d3720 Add coloured led interface for ARM boards.
Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
2007-09-04 16:18:38 +01:00
Peter Pearse
d4fc6012fd Add MACH_TYPE records for several AT91 boards.
Merge to two at45.c files into a common file, split to at45.c and spi.c
Fix spelling error in DM9161 PHY Support.
Initialize at91rm9200 board (and set LED).
Add PIO control for at91rm9200dk LEDs and Mux.
Change dataflash partition boundaries to be compatible with Linux 2.6.

Signed-off-by:	Peter Pearse <peter.pearse@arm.com>
Signed-off-by:	Ulf Samuelsson <ulf@atmel.com>
2007-08-14 10:10:52 +01:00
Wolfgang Denk
db28ddb4da Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
2006-04-03 15:46:10 +02:00
Wolfgang Denk
87cb6862b9 Update make target for ARM supported boards.
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
2005-10-06 17:08:18 +02:00
wdenk
b304c96871 Patches by Steven Scholz, 05 Apr 2005:
- Use i.MX watchdog timer for reset_cpu()
- Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
  subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
  (now in interupts.c)
2005-04-05 22:30:50 +00:00
wdenk
8aa1a2d115 Patch by Steven Scholz, 4 Apr 2005:
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
  CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
2005-04-04 12:44:11 +00:00
wdenk
400558b561 Prepare for SoC rework of ARM code:
- rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)
2005-04-02 23:52:25 +00:00
wdenk
a1191902ca * Patch by Jon Loeliger, 02 Sep 2004:
Reset monitor size back to 256 so environment can be written
  to flash on MPC85xx ADS and CDS releases.

* Patch by Paolo Broggini, 02 Sep 2004:
  Make BSS clearing on ARM systems more robust

* Patch by Yue Hu and Joe, 01 Sep 2004:
  - add PCI support for ixp425;
  - add EEPRO100 suppor tfor ixdp425 board.

* Fix problem with protected sector detection in driver/cfi_flash.c
2005-01-09 17:12:27 +00:00
wdenk
281e00a3be * Code cleanup
* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
wdenk
356a0d9f31 Patch by Markus Pietrek, 04 May 2004:
Fix clear_bss code for ARM systems (all except s3c44b0 which
doesn't clear BSS at all?)
2004-06-09 00:10:59 +00:00
wdenk
f6e20fc6ca Patch by Anders Larsen, 09 Jan 2004:
ARM memory layout fixes: the abort-stack is now set up in the
correct RAM area, and the BSS is zeroed out as it should be.

Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
of the linker scripts are replaced by '__bss_start' and '_end',
resp., which is a further step to eliminate unnecessary differences
between the implementation of the CPU architectures.
2004-02-08 19:38:38 +00:00
wdenk
a8c7c708a9 * Patch by Gleb Natapov, 19 Sep 2003:
Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c

* Patch by Anders Larsen, 17 Sep 2003:
  Bring ARM memory layout in sync with the documentation:
  stack and malloc-heap are now located _below_ the U-Boot code
2003-12-06 19:49:23 +00:00
wdenk
b0639ca332 Support new configuration of TRAB board with more memory
Minor cleanup of comments
2003-09-17 22:48:07 +00:00
wdenk
8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00
wdenk
f07771cc28 * Fix data abort exception handling for arm920t CPU
* Fix alignment problems with flash driver for TRAB board

* Patch by Donald White, 21 May 2003:
  fix calculation of base address in pci_hose_config_device()

* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
  execute "cmd2", even if "cmd1" fails. Note that this is different
  to "run var1 var2" where the contents of "var2" will NOT be
  executed when a command in "var1" fails.
2003-05-28 08:06:31 +00:00
wdenk
06d01dbe00 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
  boards, version 153 for Rev. 200 boards).

* Patch by Vladimir Gurevich, 12 Mar 2003:
  Fix relocation problem of statically initialized string pointers
  in common/cmd_pci.c

* Patch by Kai-Uwe Blöm, 12 Mar 2003:
  Cleanup & bug fixes for JFFS2 code:
  - the memory mangement was broken. It caused havoc on malloc by
    writing beyond the block boundaries.
  - the length calculation for files was wrong, sometimes resulting
    in short file reads.
  - data copying now optionally takes fragment version numbers into
    account, to avoid copying from older data.
  See doc/README.JFFS2 for details.
2003-03-14 20:47:52 +00:00
wdenk
fe8c2806cd Initial revision 2002-11-03 00:38:21 +00:00