Commit graph

304 commits

Author SHA1 Message Date
Tom Rini
936d0f9dd7 Merge patch series "Fix J7200 kernel boot when using upstream u-boot"
Reid Tonking <reidt@ti.com> says:

Since the 09.01.00.002 release of ti-linux-firmware [0] upstream uboot
has led to the kernel hanging during boot [1] for the TI J7200 S0C. The
issue was found to be a few patches that had be added to ti-u-boot, but not
yet upstreamed. This series adds the missing two patches to allow upstream
u-boot to boot the kernel properly [2].

[0] https://git.ti.com/cgit/processor-firmware/ti-linux-firmware/commit/?h=ti-linux-firmware-next&id=952fd03e36a50ec070e73560dc1060102d637ce0

Boot logs:
[1] https://gist.github.com/reidt1/5f4e85a0db258bcf20d7168bd0caebd0
[2] https://gist.github.com/reidt1/e950dc97f15ad0a09623d64f81edac39

Links to patches on ti-u-boot:
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2023.04-next&id=d878fbef4d4460e87608d8d2dfe5311499de49c5
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2023.04-next&id=543e735fe495be233a8a75b19b3d7f8ed44251e0
2023-12-19 11:42:03 -05:00
Bryan Brattlof
9fc5e19c2e arm: mach-k3: j72xx: add new 'virtual' mux
In order for the Cortex-A72s to operate at different frequencies other
than the default 2GHz, add in a new 'virtual' mux (a mux that does not
physically exist in the clock tree) that can be selected.

CC: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Reid Tonking <reidt@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
2023-12-19 10:15:53 -05:00
Michael Trimarchi
6645934646 arm: mach-k3: am625: Relax emmc boot condition
spl_mmc_emmc_boot_partition return a number different from 0
if the partition is a boot one. We can have the uboot img
for instance in a raw offset in emmc partition 0 so we would
like to continue to load the next stage. If the user want
to use EMMC as boot device allow him to use any part of the
emmc and not only boot partition

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2023-12-19 10:07:48 -05:00
Andrew Davis
7c9c6e1925 arm: mach-k3: Merge initial memory maps
The Device vs Normal memory map is the same for all K3 SoCs. Merge
the SoC specific maps into one.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
2023-12-15 15:27:48 -05:00
Andrew Davis
c90462e691 arm: mach-k3: Remove non-cached memory map areas
All normal memory areas should be mapped as such.

We added these un-cached holes in our memory map to hack around the
remoteproc driver missing the proper cache maintenance operations.

The problem is having these non-cached memory map areas causes stability
issues later in system operation due to the nature of the K3 coherency
architecture. Plus these are board specific carveouts and instead
should have been added at the board level, not here in the SoC common
code area.

Remove these non-cached memory map areas.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
2023-12-15 15:27:48 -05:00
Andrew Davis
4b4ebdb4a4 arm: mach-k3: Do not map ATF and OPTEE regions in MMU
ATF and OPTEE regions may be firewalled from non-secure entities. To
prevent access to this area we leave a hole there in the MMU map. This
is the same idea as [0] but we complete that patch by adding the same
for AM65, J721e, J7200, and J721s2 here.

[0] commit 0688ff3ae2 ("arm: mach-k3: arm64-mmu: do not map ATF and OPTEE regions in A53 MMU")

Signed-off-by: Andrew Davis <afd@ti.com>
2023-12-15 15:27:48 -05:00
Andrew Davis
d7b889403c arm: mach-k3: Let the compiler size the mem_map lists
NR_MMU_REGIONS is a copy/paste from another platform that extends
this list later. We do not do that, so let the list be the size
of the initializer list.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
2023-12-15 15:27:47 -05:00
Andrew Davis
4621960754 arm: mach-k3: Move K3 common schema.yaml out of board directory
This file is common for all K3, move it out of board/ directory and
into mach-k3. As we need to change the path in k3-binman.dtsi let's
take this opportunity to switch to absolute paths which makes adding
non-TI boards (like Toradex Verdin) not need to override these paths.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-12-15 15:27:47 -05:00
Joao Paulo Goncalves
52a86e69e2 arm: k3: Enable instruction cache for main domain SPL
Change spl_enable_dcache so it also enable icache on SPL
initialization for the main domain part of the boot flow. This
improves bootloader booting time.

Link: https://lore.kernel.org/all/20231109140958.1093235-1-joao.goncalves@toradex.com/
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Tested-by: Nishanth Menon <nm@ti.com>
2023-11-22 13:47:39 -05:00
Nishanth Menon
6a331b8014 arm: mach-k3: am62a: Add main_timer0 id to the dev list
main_timer0 is used by u-boot as the tick-timer. Add it to the soc
devices list so it an be enabled via the k3 power controller.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
2023-11-22 13:46:33 -05:00
Nishanth Menon
429ac50fdd board: beagle: Add BeagleBone AI-64 support
Add base support for BeagleBone AI-64 board support.

Further information at  https://beagleboard.org/ai-64

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-11-22 13:22:24 -05:00
Nishanth Menon
73e88a9010 board: Move beagleplay under beagle vendor folder
Move beagleplay support away from ti/am62x to it's own beagle vendor
folder.

This forms the starting point for new beagle platforms added under it's
own board vendor folder.

As part of this create all the associated files with a bare minimum
beagleplay.c file.

Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
[trini: Update k3-binman.dtsi to use full path to scheme.yaml now]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-22 13:22:01 -05:00
Nishanth Menon
c36377d09e arm: mach-k3: j721e: Improve support for UDA FS
Commit 5019170970 ("arch: arm: mach-k3: j721e: add support for UDA
FS") introduced basic UDA FS support, however, we can Take approach
similar to commit 0f1c1e8b36 ("arm: mach-k3: am625: Add support for
UDA FS"). While boot partition support with EMMC boot is useful, it is
constrained by the size of boot hardware partition itself.

In the case of K3 devices, tispl images can contain OP-TEE images that
can substantially vary in size and the u-boot image itself can vary over
time as we enable various features.

So use the CSD information in the case of EMMC_BOOT configuration being
enabled to pick boot partition or UDA FS mode operation to pick.

If EMMC_BOOT is disabled, then depend on filesystem configuration to
pick data from UDA.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-11-22 12:04:14 -05:00
Nishanth Menon
fdb7d45c76 arm: mach-k3: arm64-mmu: Refactor to be independent of board
Refactor J721E J7200 definition to make this independent of board
macros.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-11-22 12:04:14 -05:00
Nishanth Menon
3c11584c21 board: ti: j721e: Select SOC_K3_J721E_J7200 for J7200evm
Enable SOC_K3_J721E_J7200 when board is J7200 EVM - this allows us to
differentiate J7200 platform cleanly in board independent codebase.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-11-22 12:04:14 -05:00
Nishanth Menon
97bf082c9f arm: mach-k3: Kconfig: Introduce a symbol to indicate J7200
J7200 shares quite a few characteristics with J721E. However a few sets
are different. Introduce a Kconfig to differentiate the two to allow for
new boards to be introduced in a seamless manner.

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-11-22 12:04:14 -05:00
Nishanth Menon
110b07c8bc arm: mach-k3: Move TI dummy keys out of board folder
This file is used to emulate customer keys on TI development board
ecosystems, move it out of board/ directory and into mach-k3. And
change the relative paths to absolute paths in the binman paths.

While at it, drop the reference in verdin-binman file which is
redundant.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-11-22 12:04:14 -05:00
Nishanth Menon
f1c8e9c442 arm: mach-k3: Move K3 degenerate keys out of board folder
This file is common for all of K3, move it out of board/ directory and
into mach-k3. And change the relative paths to absolute paths in the
binman paths.

While at it, drop the reference in verdin-binman file which is
redundant.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Davis <afd@ti.com>
2023-11-22 12:04:14 -05:00
Andrew Davis
140d427cc9 arm: mach-k3: Move sysfw-loader into R5 directory
SYSFW is only ever loaded by the R5 core, move the code into that
directory. While here also move the related Kconfig symbols.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 12:04:14 -05:00
Andrew Davis
cf2a075b8c arm: mach-k3: Remove incorrect checks for SPL build
The kconfig option SPL means this build supports SPL but not that
this build is SPL, nor that this build is the SPL running on R5.
For options that are for R5 SPL use CPU_V7R.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 12:04:14 -05:00
Andrew Davis
ffda1089dd arm: mach-k3: Move R5 specific code into new r5/ directory
This makes it clear these are only to be used by the R5 builds of SPL.
And this will be used to later more cleanly split the two builds.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 12:04:13 -05:00
Andrew Davis
5710d0a853 arm: mach-k3: j721s2: Move board selection to mach-k3
Currently each set of board targets from a vendor is selected inside
the board directory for that vendor. This has the problem of multiple
targets, one from each vendor, being selectable at the same time.
For instance you can select both TARGET_AM654_A53_EVM and
TARGET_IOT2050_A53 in the same build.

To fix this we need to move the target board choice to a common location
for each parent SoC selection. Do this in arch/arm/mach-k3.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 09:37:23 -05:00
Andrew Davis
e4439cadb6 arm: mach-k3: am62ax: Move board selection to mach-k3
Currently each set of board targets from a vendor is selected inside
the board directory for that vendor. This has the problem of multiple
targets, one from each vendor, being selectable at the same time.
For instance you can select both TARGET_AM654_A53_EVM and
TARGET_IOT2050_A53 in the same build.

To fix this we need to move the target board choice to a common location
for each parent SoC selection. Do this in arch/arm/mach-k3.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 09:37:23 -05:00
Andrew Davis
f3bfec72d1 arm: mach-k3: am62x: Move board selection to mach-k3
Currently each set of board targets from a vendor is selected inside
the board directory for that vendor. This has the problem of multiple
targets, one from each vendor, being selectable at the same time.
For instance you can select both TARGET_AM654_A53_EVM and
TARGET_IOT2050_A53 in the same build.

To fix this we need to move the target board choice to a common location
for each parent SoC selection. Do this in arch/arm/mach-k3.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 09:37:23 -05:00
Andrew Davis
ed51c911a6 arm: mach-k3: am64x: Move board selection to mach-k3
Currently each set of board targets from a vendor is selected inside
the board directory for that vendor. This has the problem of multiple
targets, one from each vendor, being selectable at the same time.
For instance you can select both TARGET_AM654_A53_EVM and
TARGET_IOT2050_A53 in the same build.

To fix this we need to move the target board choice to a common location
for each parent SoC selection. Do this in arch/arm/mach-k3.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 09:37:23 -05:00
Andrew Davis
c3a9f9b2b9 arm: mach-k3: am65x: Move board selection to mach-k3
Currently each set of board targets from a vendor is selected inside
the board directory for that vendor. This has the problem of multiple
targets, one from each vendor, being selectable at the same time.
For instance you can select both TARGET_AM654_A53_EVM and
TARGET_IOT2050_A53 in the same build.

To fix this we need to move the target board choice to a common location
for each parent SoC selection. Do this in arch/arm/mach-k3.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 09:37:23 -05:00
Andrew Davis
1736b2f0fd arm: mach-k3: j721e: Move board selection to mach-k3
Currently each set of board targets from a vendor is selected inside
the board directory for that vendor. This has the problem of multiple
targets, one from each vendor, being selectable at the same time.
For instance you can select both TARGET_AM654_A53_EVM and
TARGET_IOT2050_A53 in the same build.

To fix this we need to move the target board choice to a common location
for each parent SoC selection. Do this in arch/arm/mach-k3.

Signed-off-by: Andrew Davis <afd@ti.com>
2023-11-22 09:37:23 -05:00
Tom Rini
dca7a8958f Prepare v2024.01-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmVbZ4QACgkQFHw5/5Y0
 tyzlggwAowkAYxSOUkwhWSbEYctVObZUPF1kDEbWlbskx52ZrQ56nWbfojZPKYdT
 OYe7fNrOJaYpbpU31lJ6U7Jm/iLCHw7vqMBmTJCNNr/BBW5jQ/exEVMa+/ZG640T
 6pTWqAHp3CfqNjBK9bnFmIqWTwrqUCZKNllPfEWNs1Pl00ypJsY9ZYaAw+4I9t0p
 2cG/BrSUyCDkgLYHi0YVUHXWQKYU4LVfz6EASGIOwTrrJGEUJ9EAGJmzgUSC0Zuw
 7qQBwHPXHBkpfP4bOFZ6xSKLp79rHXNSdjx21XW/4yerp4GC16xB+pZWZOSuz2J9
 0anoiSGPh1N81B6aciTOWeCdKPJeXEp1AxqyCcvmwLZrOOs+MSGjbKCUFnjyNtAJ
 hTXzlJQM6tQ3BhGQLY85sNe8/dOF3WNt4RiRM3K87mU8e0pahrYKSj5oUSbcrOBx
 4Hk6rQc33MvyLAYEhSJ3naktA0dPQseleOrXuOGdSWOlFf2sweVEjip4VKBlbUNb
 t3kEfQ9F
 =YBkC
 -----END PGP SIGNATURE-----

Merge tag 'v2024.01-rc3' into next

Prepare v2024.01-rc3
2023-11-20 09:19:50 -05:00
Nishanth Menon
a94a4071d4 tree-wide: Replace http:// link with https:// link for ti.com
Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-11-10 11:01:50 -05:00
Tom Rini
ac23bb63cf ti: k3: Drop <common.h> usage
None of these files need <common.h> to be included, drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-07 14:50:52 -05:00
Matthias Schiffer
5fecea171d treewide: use dev_read_addr_*_ptr() where appropriate
A follow-up to commit 842fb5de42
("drivers: use devfdt_get_addr_size_index_ptr when cast to pointer")
and commit 320a1938b6
("drivers: use devfdt_get_addr_index_ptr when cast to pointer").

In addition to using the *_ptr variants of these functions where the
address is cast to a pointer, this also changes devfdt_get_addr_*() to
dev_read_addr_*() in a few places. Some variable and field types are
changed from fdt_addr_t or phys_addr_t to void* where the cast was
happening later.

This patch fixes a number of compile warnings when building a 32bit
U-Boot with CONFIG_PHYS_64BIT=y. In some places, it also fixes error
handling where the return value of dev_read_addr() etc. was checked for
NULL instead of FDT_ADDR_T_NONE.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-10-13 14:01:42 -06:00
Dominik Haller
2c6e28831b arm: mach-k3: j721s2_init: Enable memory with CONFIG_K3_J721E_DDRSS
Make that condition more generic by checking if the memory controller
driver is enabled instead of using the EVM's config.

Signed-off-by: Dominik Haller <d.haller@phytec.de>
2023-10-12 14:06:05 -04:00
Manorit Chawdhry
82d44bfbe3 arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list
mcu_timer0 is used by u-boot as the tick-timer. Add it to the soc
devices lsit so it an be enabled via the k3 power controller.

Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-10-12 14:06:04 -04:00
Reid Tonking
83eb443696 arm: mach-k3: j7200: Add mcu_timer0 id to the dev list
mcu_timer0 is now used as the tick timer in u-boot, so this adds the
timer to the soc device list so it can be enabled via the k3 power
controller.

Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Reid Tonking <reidt@ti.com>
2023-10-12 14:06:04 -04:00
Andrew Davis
693886856a arm: mach-k3: Remove secure device makefile
This is now done using binman but this file was leftover and is now
unused, remove it.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
2023-10-11 13:22:27 -04:00
Matthias Schiffer
17deab0edd arm: mach-k3: common: fix compile warnings with PHYS_64BIT on 32bit
Use uintptr_t instead of phys_addr_t where appropriate, so passing the
addresses to writel() doesn't result in compile warnings when PHYS_64BIT
is set for 32bit builds (which is actually a useful configuration, as
the K3 SoC family boots from an R5 SPL, which may pass bank information
based on gd->bd->bi_dram to fdt_fixup_memory_banks() etc., so PHYS_64BIT
is needed for fixing up the upper bank).

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2023-10-09 15:24:31 -04:00
Neha Malcom Francis
50fa67d091 arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS
When setting boot media to load the TIFS binary in legacy boot flow
(followed by J721E), get_timer() is called which eventually calls
dm_timer_init() to grab the tick-timer, which is mcu_timer0. Since we
need to set up the clocks before using the timer, move clk_k3 driver
probe before k3_sysfw_loader to ensure we have all necessary clocks set
up before.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-10-04 14:16:01 -04:00
Neha Malcom Francis
dd0169f033 arm: mach-k3: j721e: dev-data: Add mcu_timer0 ID
U-Boot uses mcu_timer0 as the tick-timer, so add it to device list.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00
Jesse Taube
6ab77bb14f Convert CFG_SYS_UBOOT_START to Kconfig
Commit 65cc0e2a65 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*")
renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately,
this meant that the value was no longer available to the Makefile. This
caused imxrt to fail to boot. All the other boards that used this
variable were unaffected because they were using the default value
which is CONFIG_TEXT_BASE.

This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
value to CONFIG_TEXT_BASE.

Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-30 15:24:43 -04:00
Simon Glass
1e94b46f73 common: Drop linux/printk.h from common header
This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-24 09:54:57 -04:00
Nishanth Menon
0f1c1e8b36 arm: mach-k3: am625: Add support for UDA FS
While boot partition support with EMMC boot is useful, it is
constrained by the size of boot hardware partition itself.

In the case of K3 devices, tispl images can contain OP-TEE images that
can substantially vary in size and the u-boot image itself can vary over
time as we enable various features.

So use the CSD information in the case of EMMC_BOOT configuration being
enabled to pick boot partition or UDA FS mode operation to pick.

If EMMC_BOOT is disabled, then depend on filesystem configuration to
pick data from UDA.

While at this, drop the extraneous whitespace.

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08 10:07:12 -04:00
Nishanth Menon
8b5c4cd78d arm: mach-k3: am625_init: Convert rtc_erratumi2327_init to static
The erratum is called locally, make it static, drop the #ifdeffery since
it will only be called in R5 build and mark it potentially unused to
stop compiler screaming at us.

While at this, drop the redundant return for a void function.

Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08 10:07:12 -04:00
Nishanth Menon
6beb43e017 arm: mach-k3: am625_init: Use IS_ENABLED()
Drop the #ifdeffery and use IS_ENABLED() inline check and let the compiler
do it's thing.

Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08 10:07:12 -04:00
Marcel Ziswiler
7d1a10659f board: toradex: add verdin am62 support
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
V1.0A module and subsequent V1.1 launch configuration SKUs. They are
strapped to boot from their on-module eMMC. U-Boot supports booting
from the on-module eMMC only, DFU support is disabled for now due to
missing AM62x USB support.

The device trees were taken straight from Linux v6.5-rc1.

Boot sequence is:
SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE
  ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img)

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-04 15:03:42 -04:00
Marcel Ziswiler
5c87b19c8e arm: mach-k3: am62: fix 2nd mux option of clkout0
Fix second mux option of clkout0 which should really be
DEV_BOARD0_CLKOUT0_IN_PARENT_HSDIV4_16FFT_MAIN_2_HSDIVOUT1_CLK10
rather than twice the same according to [1].

[1] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/am62x/clocks.html#clocks-for-board0-device

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-04 15:03:34 -04:00
Manorit Chawdhry
c97ed47b42 mach-k3: security: improve the checks around authentication
The following checks are more reasonable as the previous logs were a bit
misleading as we could still get the logs that the authetication is
being skipped but still authenticate. Move the debug prints and checks
to proper locations.

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-28 10:11:01 -04:00
Emanuele Ghidoli
2a61447414 arm: k3: fix fdt_del_node_path implicit declaration and a missing include
Fix missing declaration of fdt_del_node_path() while compiling am625_fdt.c and
missing common_fdt.h include in common_fdt.c

Fixes: 70aa5a94d4 ("arm: mach-k3: am62: Fixup CPU core, gpu and pru nodes in fdt")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
2023-07-28 10:11:01 -04:00
Sjoerd Simons
2d9c6df0e6 arm: mach-k3: am62: Add timer0 id to the dev list
Timer0 is used by u-boot as the tick timer; Add it to the soc devices
list so it can be enabled via the k3 power controller.

Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Cc: Francesco Dolcini <francesco@dolcini.it>
Cc: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28 10:10:36 -04:00
Manorit Chawdhry
2bfd63d57b mach-k3: common: correct the calculations for determining firewalls
The background firewall calculations were wrong, fix that to determine
both the background and foreground correctly.

Fixes: 8bfce2f998 ("arm: mach-k3: common: reorder removal of firewalls")

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-21 19:37:58 -04:00
Manorit Chawdhry
0eef2bf36e Kconfig: j721s2: Fix the scratchpad base
Fix the regression that occurred during the alignment of binman series
merges along with these HS fixes that caused silent regression in this.

Fixes: 30a7ee87fd ("Kconfig: j721s2: Change K3_MCU_SCRATCHPAD_BASE to non firewalled region")

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-21 19:37:57 -04:00