Commit graph

62006 commits

Author SHA1 Message Date
Anand Moon
920c0d4523 configs: meson64: enable GIC support for G12A/G12B
Enable GIC support for G12A/G12B platform.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-07 14:50:41 +01:00
Christian Hewitt
9c84c21009 boards: amlogic: add Khadas VIM3L support
Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip
instead of A311D. Board config is derived from khadas-vim3_defconfig and
sei610_defconfig. README is based on README.khadas-vim3; the difference
is that VIM3L uses FIP files from the g12a folder in vendor sources not
the g12b folder.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: added vim3l readme into w400 MAINTAINERS]
2020-01-07 14:50:28 +01:00
Christian Hewitt
b9d5480fdb ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1
Import the Khadas VIM3L device-tree from [1]

[1] e42617b825f8 ("Linux 5.5-rc1")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-07 11:16:53 +01:00
Simon Glass
b9dea62b6b video: meson: Drop unnecessary header includes
These files should not be included in meson header files. Drop them and
tidy up the affected C files.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-07 11:15:24 +01:00
Tom Rini
0b0c6af387 Prepare v2020.01
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-06 15:56:31 -05:00
Tom Rini
797eee36a1 Revert "mmc: davinci: drop struct davinci_mmc_plat"
Adam Ford reports that this change breaks booting on da850-evm and
Bartosz Golaszewski agrees that with the impending release we should
revert the change for now.  With that noted:

This reverts commit 21a4d80a71.

Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-04 09:33:33 -05:00
Tom Rini
70bd39d72a Merge branch '2020-01-03-master-imports'
- Fixes for host tools with musl C library
- Two fixes for TI K3 platforms
2020-01-03 09:47:22 -05:00
Lokesh Vutla
40109f4d7e arm: mach-k3: Enable WA for R5F deadlock
On K3 devices there are 2 conditions where R5F can deadlock:
1.When software is performing series of store operations to
  cacheable write back/write allocate memory region and later
  on software execute barrier operation (DSB or DMB). R5F may
  hang at the barrier instruction.
2.When software is performing a mix of load and store operations
  within a tight loop and store operations are all writing to
  cacheable write back/write allocates memory regions, R5F may
  hang at one of the load instruction.

To avoid the above two conditions disable linefill optimization
inside Cortex R5F which will make R5F to only issue up to 2 cache
line fills at any point of time.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-03 09:47:11 -05:00
Lokesh Vutla
196d3e4017 arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config tool
Update the ddr settings to use the DDR reg config tool rev 0.2.0.
This reduces the aging count(in DDRSS_CTL_274_DATA reg) to 15 in-order
to avoid DSS underflow errors.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2020-01-03 09:47:10 -05:00
Sergei Trofimovich
c6ad93612a include/u-boot/crc.h: pull 'uint' definition on musl targets
The build failure was originally reported on arm64-musl
target at https://bugs.gentoo.org/703132. Here is the amd64-musl
variant:

```
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc)
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all            -j$(nproc)
...
include/u-boot/crc.h:37:44: error: unknown type name 'uint'; did you mean 'int'?
   37 | void crc16_ccitt_wd_buf(const uint8_t *in, uint len,
      |                                            ^~~~
      |                                            int
```

Note: 'uint' is not defined there.

On glibc 'uint' comes from <sys/types.h> and happens to work on most .c files.

The change imports 'uint' declaration from '<compiler.h>'.

Bug: https://bugs.gentoo.org/703132
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-03 09:47:10 -05:00
Sergei Trofimovich
d11fa9c16b include: fix 'ulong' definition on musl targets
The build failure was originally reported on arm64-musl
target at https://bugs.gentoo.org/703132. Here is the amd64-musl
variant:

```
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc)
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all            -j$(nproc)
...
In file included from tools/env/../../env/flags.c:7,
                 from tools/env/env_flags.c:1:
include/env.h:159:1: error: unknown type name 'ulong'; did you mean 'long'?
  159 | ulong env_get_ulong(const char *name, int base, ulong default_val);
      | ^~~~~
      | long
```

Note: 'ulong' is not defined there.

On glibc 'ulong' comes from <sys/types.h>:

```c
/* Old compatibility names for C types.  */
typedef unsigned long int ulong;
```

On musl it comes from <sys/types.h> as well but from under different guards:

```c
typedef unsigned long u_long, ulong;
```

The change inlines 'ulong' define similar to 'uint' define.

Bug: https://bugs.gentoo.org/703132
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-03 09:47:10 -05:00
Tom Rini
4b75aa5aa7 - fix missing graphics output on some x86 boards
- avoid using #ifdef in video code
 - add .gitignore for video font *.S files
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXg5F7g4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXKzNAJ93lUmXiaSDCJDTJ99G6RcpbDY98QCeKdAsgKEq
 +edrqBimoikBmbw0NYE=
 =+x5b
 -----END PGP SIGNATURE-----

Merge tag 'fixes-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- fix missing graphics output on some x86 boards
- avoid using #ifdef in video code
- add .gitignore for video font *.S files
2020-01-02 18:12:05 -05:00
Dario Binacchi
bf8363931f video: add wrappers for ttf type files to .gitignore
The scripts/Makefile.lib generates an assembler file (*.S) to wrap the
font data for each file of type ttf defined in Kconfig.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-01-02 17:45:42 +01:00
Tom Rini
28aa6dc29a Merge tag 'u-boot-rockchip-20191231' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix latest mainline kernel for rk3308
- Update rk3288-evb config to suport OP-TEE
- Fix for firefly-px30 DEBUG_UART channel and make it standalone
- Script make_fit_atf add python3 support
- Fix rk3328 timer with correct COUNTER_FREQUENCY
- Fix rk3328 ATF support with enable spl-fifo-mode
2020-01-02 10:28:26 -05:00
Tom Rini
13ef116507 Merge branch '2020-01-02-master-imports'
- Assorted test.py fixes
- Other minor changes
2020-01-02 10:27:47 -05:00
Simon Glass
1785bf54af test: Fix the boardspec for the SPL handoff test
This test currently does not run because it specifies the sandbox board
instead of sandbox_spl. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02 10:27:23 -05:00
Igor Opaniuk
416338128d mailmap: Update mail address for Igor Opaniuk
My address at Linaro doesn't exist anymore, so people
keep getting mail delivery error responses. Map this address
to the actual one.

Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-02 10:27:23 -05:00
Stephen Warren
fc1a3bfedf test_env: don't strip() printenv results
get_env() was originally written to strip() the output of printenv to
isolate the test from any whitespace changes in printenv's output.
However, this throws away any whitespace in the variable value, which can
cause issues when test code expects to see that whitespace. In fact,
printenv never adds any whitespace at all, so there's no need to strip.

The strip causes a practical problem for test_env_echo_exists() if
state_test_env.get_existent_var() happens to choose a U-Boot variable that
contains trailing whitespace. This is true for variable boot_targets.

With Python 2, get_existent_var() never returned boot_targets so this
issue never caused a practical problem.

With Python 3, get_existent_var does sometimes return boot_targets, no
doubt due to Python 3's different dict hash key order implementation,
about 0.5-2% of the time, so this test appears intermittent. With the
strip removed, this intermittency is solved, since the test passes for all
possible U-Boot variables.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2020-01-02 10:27:23 -05:00
Robert P. J. Day
e852b30b23 arch/arm/Kconfig: typo/grammar/punctuation fixes
Various (mostly minor) spelling, grammar and punctuation tweaks for
arch/arm/Kconfig.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2020-01-02 10:27:23 -05:00
Dario Binacchi
8190d5a93f .gitignore: ignore files generated by asn1 compiler
As described in doc/README.asn1 document the tools/asn1_compiler is used
to "generate bytecode as a C file (*.asn1.[ch]) from *.asn1 file".

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-01-02 10:27:23 -05:00
Dario Binacchi
e198bb51dd tools: .gitignore: add asn1_compiler
Add the tool to the ignore list to prevent being marked as unversioned.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-02 10:27:23 -05:00
Simon Glass
0c20aafe0b video: Avoid using #ifdef in video-uclass.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.

Change the #ifdefs to use IS_ENABLED(), etc., instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02 16:25:25 +01:00
Simon Glass
775d33229f video: Avoid using #ifdef in vidconsole-uclass.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.

Change the #ifdefs to use CONFIG_IS_ENABLED() instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02 16:25:25 +01:00
Simon Glass
c656731901 video: Avoid using #ifdef in console_rotate.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.

Change the #ifdefs to use IS_ENABLED() instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02 16:25:25 +01:00
Simon Glass
46421197d5 video: Avoid using #ifdef in video blitting code
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.

Change the #ifdefs to use IS_ENABLED() instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02 16:25:25 +01:00
Simon Glass
512563ba0b video: x86: Enable 32-bit graphics by default
Most x86 boards that use video make use of 32bpp graphics. Enable this by
default. This fixes missing graphics output on some x86 boards.

Also remove the unnecessary 'default n' while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02 16:25:25 +01:00
Kever Yang
c0a474b9d9 rockchip: evb-rk3328: Enable support ATF in SPL
Enable the ATF in SPL and adjust the SPL STACK/HEAD at the same time to
support ATF entry at 0x40000.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-31 16:04:16 +08:00
Kever Yang
fa2047c473 rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc
Since mmc to sram can't do dma, add patch to prevent aborts transfering
TF-A parts.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-31 15:57:55 +08:00
Kever Yang
09e70654a1 rockchip: rk3328: add COUNTER_FREQUENCY definition
The arch timer needs COUNTER_FREQUENCY to get correct counter, add it to
make the timer works correct.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-31 15:18:51 +08:00
Tom Rini
6cb87cbb14 Fixes for 2020.01
-----------------
 - Fixes for Nitrogen6x
 - Fix corruption for mx51evk
 - colibri i.MX6: fix broken ESDHC conversion
 - mx6sxsabresd: fix broken mmcdev
 - imx6q_logic: cleanup boot sequence
 - update ATF for imx8mq_evk
 - pfuze: fix pmic_get()
 
 Travis CI: https://travis-ci.org/sbabic/u-boot-imx/builds/630007464
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4HLywPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3cB0L/jRElnVFGaZC6Bii7jVS9u/oJ03yYM73Qp4M
 AWlITWIHQtB6PAGBVYz+Ts17grkYWT5fwuV3TqE+yfOeeD76cfo37L9iSePIQ7mC
 SYWfId3E3xz++2/64HM1PETWmPXi76QxeJ4GMP9amZMLW+huS6sWi1tfVEURedl0
 LXddxpa4DkjMeU4sKLgrGLv3+wIu5P6ELcpQXrBQs7uVQxiwvWh3rrldHlLzacHm
 o2DUE4rDrtN5K2khT/Gq9wf7eG1vCbIKFvDTTFjgkg5nlfeeiiEHXqAKiLN/hPmq
 BrrxBXucPqUj9V/tozcBMrQ6bFfGkaGaBUVT8AqBWe/CUKaicrcxZLh1Ef18fo0y
 yxh3RfnW6kYIokRxP4uf9kRXxip7hYciqlvhHdO7pY6TkwweuzFVvUmlKD6dCS9z
 iulDyZfAXNXYxtEFqBBO7A2bQo5u9MqR7xYjNc3aALOeXt8H+wcM7BQZ1ga72d2X
 nNw1XHR84Kjr/lc5PJRVp/Nz9s4VVw==
 =GLWM
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191228' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2020.01
-----------------
- Fixes for Nitrogen6x
- Fix corruption for mx51evk
- colibri i.MX6: fix broken ESDHC conversion
- mx6sxsabresd: fix broken mmcdev
- imx6q_logic: cleanup boot sequence
- update ATF for imx8mq_evk
- pfuze: fix pmic_get()

Travis CI: https://travis-ci.org/sbabic/u-boot-imx/builds/630007464
2019-12-28 08:07:16 -05:00
Tom Rini
831f06fe9a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Orange Pi Zero Plus 2 support
- sunxi psci, prcm fixes
2019-12-27 16:46:38 -05:00
Tom Rini
1058bc5ccc Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- rk spi transfer limit fix
- Gigadevice, gd25q128 support
- spi-nor-core warnings
2019-12-27 16:46:15 -05:00
Patrik Dahlström
5278e25d99 omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
The omap3_beagle NAND ECC scheme was changed in 4b37928d35 for unknown
reasons, leading to uncorrectible ecc errors. This commit changes it
back to what it was before.

Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
2019-12-27 16:46:02 -05:00
Robert Beckett
fff7b33ce5 rtc: rx8010js: add compatible string
Add compatible string used by Linux.
Allows for simpler syncing of device trees.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2019-12-27 14:34:29 +01:00
Robert Beckett
0ba121668c rtc: s35392a: add compatible strings
Add compatible strings used by Linux.
Allows for simpler syncing of device trees.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2019-12-27 14:34:03 +01:00
Robert Beckett
a00b1f9d7a rtc: rx8010sj: fix DM initialization
pass the udevice by reference instead of double ref

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2019-12-27 14:33:11 +01:00
Adam Ford
576434b205 ARM: imx6q_logic: Cleanup boot sequence check
The board_boot_order() function currenly assumes that the boot source
is MMC/eMMC, but this isn't true for the NAND devices.

This patch cleans up board_boot_order() to check for NAND, SD, ESD,
MMC or EMMC.  Anything beyond these are not supported, so it will
default back to the serial downloader if any of those devices are not
available.

Fixes: 9fb50c68da ("ARM: imx6q_logic: Fix MMC2 booting")

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-12-27 14:30:52 +01:00
Troy Kisky
61d7e2bcc7 ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'
This fixes commit <91435cd40d30> "ARM: i.MX6: exclude the ARM errata
 from i.MX6 UP system"

for nitrogen6x. The above commit removed the errata for the board
since MX6Q/MXDL/MX6S is selected via CONFIG_SYS_EXTRA_OPTIONS

This restores the errata configs.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-12-27 14:28:42 +01:00
Troy Kisky
c30c3603d7 nitrogen6x: prepare for CONFIG_MX6QDL
The next patch adds CONFIG_MX6QDL so that
errata will be enabled again.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-12-27 14:28:28 +01:00
Jagan Teki
dbbdc81c60 spi: rk: Limit transfers to (64K - 1) bytes
The Rockchip SPI controller's length register only supports 16-bits,
yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
1"). Trying to transfer more than that (e.g., with a large SPI flash
read) will cause the driver to hang.

Now, it seems that while theoretically we should be able to program
CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
cause the core to choke, so stick with a maximum of 64K - 1 bytes --
i.e., 0xffff.

Note, that the size is further divided into 'minus 1' while writing
into CTRLR1.

This change fixed two different read issues,

1. sf read failure when with > 0x10000

2. Boot from SPI flash failed during spi_flash_read call in
   common/spl/spl_spi.c

Observed and Tested in
- Rockpro64 with Gigadevice flash
- ROC-RK3399-PC with Winbond flash

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-27 17:47:26 +05:30
Vignesh Raghavendra
cb56caacf8 mtd: spi-nor-core: Fix static checker warnings
Static checker warns 'ret' variable may be used uninitialized in
spi_nor_erase() and spi_nor_write() in case of zero length requests.
Fix these warnings by checking for zero length requests and returning
early.

Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-12-27 17:47:26 +05:30
Jorge Ramirez-Ortiz
e97bdfa5da tools/imximage: share DCD information via Kconfig
IMX based platforms can have the DCD table located on different
addresses due to differences in their memory maps (ie iMX7ULP).

This information is required by the user to sign the images for secure
boot so continue making it accessible via mkimage.

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-12-27 12:55:59 +01:00
Fabio Estevam
3b5aefac56 imx8mq_evk: Update the required ATF branch
Following the README instructions leads to a non-booting
U-Boot:

U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300)
PMIC:  PFUZE100 ID=0x10
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Trying to boot from MMC2

(It hangs here)

Use the "imx_4.19.35_1.0.0" ATF branch instead, which
fixes such problem and allow the boot to complete again.

Suggested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-12-27 12:15:09 +01:00
Fabio Estevam
502f3ca00a imx8m_evk: Remove unneeded earlycon string
Passing earlycon string in the command line may be
useful during bring up, but not after such phase.

Remove the earlycon string to align with the other i.MX SoCs
command lines.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-27 12:14:44 +01:00
Fabio Estevam
0d3bc81391 imx8m: ddr_init: Move ddr_init() messages to debug level
Currently inside ddr_init() there is a mix of printf() and debug()
level messages.

Since this type of information is useful for debug purposes,
convert all of them to debug level for consistency.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-12-27 12:14:25 +01:00
Fabio Estevam
89c832cfe7 mx51evk: Fix U-Boot corruption after saving the environment
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.

Running "saveenv" followed by a "reset" causes U-Boot to hang because
of this overlap.

Fix this problem by increasing the CONFIG_ENV_OFFSET size.

Also, in order to prevent this same problem to happen in the future,
use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.

CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-27 12:14:02 +01:00
Fabio Estevam
d7cd860c22 mx6sxsabresd: Adjust the mmcdev after DM conversion
After the DM conversion the boot SD card is now device 3.

Adjust it so that we can boot the kernel again.

While at it avoid a hardcoded mmc dev inside the finduuid script.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-27 12:13:25 +01:00
Fabio Estevam
7ab832e409 pfuze: Fix the pmic_get() parameter in the DM case
Currently the following hang is observed when booting a imx6sx-sdb
board:

U-Boot 2020.01-rc5-00004-g643366bcd5 (Dec 19 2019 - 14:56:23 -0300)

CPU:   Freescale i.MX6SX rev1.0 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 32C
Reset cause: POR
Model: Freescale i.MX6 SoloX SDB RevB Board
Board: MX6SX SABRE SDB revA
DRAM:  1 GiB
initcall sequence bffd8514 failed at call 87804cc0 (err=-19)
### ERROR ### Please RESET the board ###

When pmic_get() is used with DM the first parameter must be
the complete node name plus the unit address.

Fix the pmic_get() parameter to fix the boot regression.

Tested on a imx6sx-sdb and imx6q-sabresd boards.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-12-27 12:13:11 +01:00
Igor Opaniuk
bfeaea7d84 colibri_imx6: fix broken fsl_esdhc_imx conversion
Not all CONFIG_FSL_ESDHC defines were properly replaced with
CONFIG_FSL_ESDHC_IMX, which broke U-boot proper booting on
Colibri iMX6 SoMs.

U-boot is stuck after this message:
Commercial temperature grade DDR3 timings, 64bit bus width.
Trying to boot from MMC1

Fixes: e37ac717d7("Convert to use fsl_esdhc_imx for i.MX platforms")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-12-27 09:35:29 +01:00
Jeffy Chen
f43b0d49c0 rockchip: mkimage: fix wrong range of rc4 encoding for boot image
The rc4 encoding should cover spl header as well, and the file_size
contains spl header too.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-27 15:17:07 +08:00