Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity

ARM: imx6q_logic: Cleanup boot sequence check

Browse source 
The board_boot_order() function currenly assumes that the boot source
is MMC/eMMC, but this isn't true for the NAND devices.

This patch cleans up board_boot_order() to check for NAND, SD, ESD,
MMC or EMMC.  Anything beyond these are not supported, so it will
default back to the serial downloader if any of those devices are not
available.

Fixes: 9fb50c68da ("ARM: imx6q_logic: Fix MMC2 booting")

Signed-off-by: Adam Ford <aford173@gmail.com>
This commit is contained in:
Adam Ford 2019-11-03 07:58:40 -06:00 committed by Stefano Babic
parent 61d7e2bcc7
commit 576434b205
1 changed files with 37 additions and 17 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

54
board/logicpd/imx6/imx6logic.c
View file

@ -156,29 +156,49 @@ void board_boot_order(u32 *spl_boot_list)
{
struct src *psrc = (struct src *)SRC_BASE_ADDR;
unsigned int reg = readl(&psrc->sbmr1) >> 11;
/*
* Upon reading BOOT_CFG register the following map is done:
* Bit 11 and 12 of BOOT_CFG register can determine the current
* mmc port
* 0x1 SD1-SOM
* 0x2 SD2-Baseboard
*/
u32 boot_mode = imx6_src_get_boot_mode() & IMX6_BMODE_MASK;
unsigned int bmode = readl(&src_base->sbmr2);
reg &= 0x3; /* Only care about bottom 2 bits */
switch (reg) {
case 0:
spl_boot_list[0] = BOOT_DEVICE_MMC1;
/* If bmode is serial or USB phy is active, return serial */
if (((bmode >> 24) & 0x03) == 0x01 || is_usbotg_phy_active()) {
spl_boot_list[0] = BOOT_DEVICE_BOARD;
return;
}
switch (boot_mode >> IMX6_BMODE_SHIFT) {
case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX:
spl_boot_list[0] = BOOT_DEVICE_NAND;
break;
case 1:
spl_boot_list[0] = BOOT_DEVICE_MMC2;
case IMX6_BMODE_SD:
case IMX6_BMODE_ESD:
case IMX6_BMODE_MMC:
case IMX6_BMODE_EMMC:
/*
* Upon reading BOOT_CFG register the following map is done:
* Bit 11 and 12 of BOOT_CFG register can determine the current
* mmc port
* 0x1 SD1-SOM
* 0x2 SD2-Baseboard
*/
reg &= 0x3; /* Only care about bottom 2 bits */
switch (reg) {
case 0:
spl_boot_list[0] = BOOT_DEVICE_MMC1;
break;
case 1:
spl_boot_list[0] = BOOT_DEVICE_MMC2;
break;
}
break;
default:
/* By default use USB downloader */
spl_boot_list[0] = BOOT_DEVICE_BOARD;
break;
}
/* If we cannot find a valid MMC/SD card, try NAND */
spl_boot_list[1] = BOOT_DEVICE_NAND;
/* As a last resort, use serial downloader */
spl_boot_list[2] = BOOT_DEVICE_BOARD;
spl_boot_list[1] = BOOT_DEVICE_BOARD;
}
static void ccgr_init(void)