Commit graph

124 commits

Author SHA1 Message Date
Simon Glass
b6458d38d6 ide: Correct function signatures for ide_read/write()
The prototypes in the header were changed by commit 4ac8f8e0 but the
functions no longer match. Correct this.

It seems odd that block devices take an lbaint_t for the block count, but
an unsigned long for the blknr. Surely we should promote blknr to lbaint_t
also?

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2012-11-02 15:20:43 -07:00
Pavel Herrmann
8af4472a77 remove unnecessary includes from cmd_ide.c
mpc8xx and mpc5xxx specific includes in cmd_ide.c are not required, remove them.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:09 -07:00
Pavel Herrmann
21d2bf426f split PCS440EP specific code from cmd_ide.c
Move specific ide_input_data and friends to board-specific file.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:09 -07:00
Pavel Herrmann
4d1361d867 split AU1X00 specific code from cmd_ide.c
move special case of ide_swap_read() for AU1X00 SoC into SoC-specific directory.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:09 -07:00
Pavel Herrmann
19be2ea2ef make ide_led() a weak alias
Make ide_led() a weak alias instead of global/local function/empty macro
based on CONFIG_IDE_LED value and/or board-specific CONFIGs, to get rid of
board-specific code in cmd_ide.c
Define dummy values to get rid of compoler errors in case where ide_led()
used to be an empty macro

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:09 -07:00
Pavel Herrmann
28920b1fd2 split CPC45 board-specific IDE functions from cmd_ide.c
Move input_data() and friends to board/cpc45/ide.c, as overrides for weak
aliases in cmd_ide.c

note: checkpatch emits warnings about using volatile

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:08 -07:00
Pavel Herrmann
f5b82c0f9c change all versions of input_data() and output_data() to global weak aliases
This changes input_data() and friends from static function to global symbols
under weak alias, to enable board specific overrides (and therefore get rid of
board-specific code in cmd_ide.c)
Also declare ide_bus_offset in the header file, so other files can use
ATA_CURR_BASE as well.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:08 -07:00
Pavel Herrmann
e4148c1165 split IVM power hooks from cmd_ide.c
Move power control code from ide_reset() into IVM-specific IDE reset code.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:08 -07:00
Pavel Herrmann
8d1165e11a split mpc8xx hooks from cmd_ide.c
move most of mpc8xx hooks from cmd_ide.c into ide_preinit() and newly created
ide_init_postreset() (invoked after calling ide_reset after ide_preinit),
some cleanup to make checkpatch happy, enable IDE init hooks in configs of
affected boards.
confusingly, these hooks are used by more than just mpc8xx-based boards, and
therefore are placed in arch/ppc/lib/

note: checkpatch still emits warnings about using volatile

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:08 -07:00
Pavel Herrmann
94fa029a6d remove CONFIG_SC3 from cmd_ide.c
There is no difference in codepath with CONFIG_SC3 enabled, so just remove it

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:08 -07:00
Tom Rini
61c0d6ae77 gth2: Remove this platform
After taking with the former maintainer, delete this platform.  The
patch is from the former maintainer.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:46 -07:00
Rob Herring
7405a13310 combine block device load commands into common function
All the raw block load commands duplicate the same code. Starting with
the ide version as it has progress updates convert ide, usb, and scsi boot
commands to all use a common version.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25 14:43:19 -07:00
Simon Glass
770605e4f9 bootstage: Replace show_boot_progress/error() with bootstage_...()
These calls should not be made directly any more, since bootstage
will call the show_boot_...() functions as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 21:41:39 +01:00
Simon Glass
90e153d770 bootstage: Convert IDE progress numbers to enums
This changes over the IDE progress numbers to use enums from bootstage.h.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 21:24:21 +01:00
Simon Glass
5ddb118da4 bootstage: Use show_boot_error() for -ve progress numbers
Rather than the caller negating our progress numbers to indicate an
error has occurred, which seems hacky, add a function to indicate this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-18 20:56:00 +01:00
Simon Glass
4c12eeb8b5 Convert cmd_usage() calls in common to use a return value
Change all files in common/ to use CMD_RET_USAGE instead of calling
cmd_usage() directly. I'm not completely sure about this patch since
the code since impact is small (100 byte or so on ARM) and it might
need splitting into smaller patches. But for now here it is.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-06 21:09:46 +01:00
Wolfgang Denk
a2b92a655a common/cmd_ide.c: fix GCC 4.6 build warnings
Fix:
cmd_ide.c: In function 'ide_ident':
cmd_ide.c:988:6: warning: variable 'do_retry' set but not used
[-Wunused-but-set-variable]

Delete the unused variable.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-03 20:41:47 +01:00
Wolfgang Denk
34c202c7eb common/cmd_ide.c: CodingStyle cleanup
Make file acceptable to checkpatch.

This is only a basic clean up to the extend possible without any real
changes to the source code. Warnings due to line over 80 characters
were accepted because these affect only printf()s with user visible
strings.  No attempts were made to fix warnings about volatile and
externs - these need a more thorough cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-03 20:41:32 +01:00
Wolfgang Denk
87a5d60103 Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
2011-10-28 00:15:19 +02:00
Marek Vasut
5bbe10dd2e GCC4.6: Squash warning in cmd_ide.c
cmd_ide.c: In function ‘ide_read’:
cmd_ide.c:1227:2: warning: format ‘%LX’ expects argument of type ‘long long
unsigned int’, but argument 3 has type ‘lbaint_t’ [-Wformat]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:03 +02:00
Lei Wen
5ff8b35412 ARM: orion5x: reduce dependence of including platform file
For files like the drivers/serial/serial.c, it must include the
platform file, as the CONFIG_SYS_NS16550_COM1 must reference to
the definition in the platform definition files.

Include the platform definition file in the config file, so that it
would decouple the dependence for the driver files.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27 21:56:33 +02:00
Marek Vasut
b18eabfa5f IDE: Fix complaints about strict aliasing in cmd_ide.c
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-01 21:53:39 +02:00
Matthew McClintock
df3fc52608 disk/part.c: Make features optional
If we don't want to build support for any partition types we can now
add #undef CONFIG_PARTITIONS in a board config file to keep this from
being compiled in. Otherwise boards assume this is compiled in by
default

Signed-off-by: Matthew McClintock <msm@freescale.com>
2011-07-26 14:10:14 +02:00
Mike Frysinger
67d668bf92 autostart: unify duplicated logic into the bootm code
Rather than having a bunch of random commands handle autostart behavior,
unify the logic in a single place.  This also fixes building of these

different commands when bootm is disabled.

Acked-by: Matthew McClintock <msm@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-25 22:18:26 +02:00
Wolfgang Denk
96d04c3150 IDE: fix compiler warnings
The changes introduced by commit 0abddf8 ``cmd_ide: enhance new
feature "CONFIG_IDE_AHB"'' caused compiler warnings like

cmd_ide.c: In function 'ide_init':
cmd_ide.c:716: warning: assignment from incompatible pointer type

Constify the respective function arguments to fix this.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-04-30 23:29:55 +02:00
Macpaul Lin
0abddf82d5 cmd_ide: enhance new feature "CONFIG_IDE_AHB"
Although most IDE controller is designed to be connected to PCI bridge,
there are still some IDE controller support AHB interface for SoC design.

The driver implementation of these IDE-AHB controllers differ from other
IDE-PCI controller, some additional registers and commands access is required
during CMD/DATA I/O. Hence a configuration "CONFIG_IDE_AHB" in cmd_ide.c is
required to be defined to support these kinds of SoC controllers. Such as
Faraday's FTIDE020 series and Global Unichip's UINF-0301.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-04-30 21:04:25 +02:00
Shinya Kuribayashi
c6dc8a734d cmd_ide: Fix an unused CONFIG_AU1X00 symbol to work as intended
commit 8bde63eb3f ([MIPS] Rename Alchemy
processor configs into CONFIG_SOC_*) forgot to pick up this one.

Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-02-05 20:06:03 +09:00
Wolfgang Denk
3e5ab1af24 Revert "boot cmds: convert to getenv_yesno() with autostart"
This reverts commit 5a442c0add.

This commit changed the behaviour of getenv_yesno() (both the default
behaviour and the documented behaviour for abbreviated arguments)
which resulted in problems in several areas.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-01-11 20:56:34 +01:00
Mike Frysinger
5a442c0add boot cmds: convert to getenv_yesno() with autostart
Use the new helper func to clean up duplicate logic handling of the
autostart env var.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:58:30 +01:00
Mike Frysinger
36ebb78779 do_bootm: unify duplicate prototypes
The duplication of the do_bootm prototype has gotten out of hand,
and they're pretty much all outdated (wrt constness).  Unify them
all in command.h.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:45:32 +01:00
Wolfgang Denk
77efe35fec Remove HMI10 board support
Recent changes caused that the HMI10 board now is included in the
boards built by MAKEALL, which revealed that compilation for this
board has been broken for a long time:

ps2ser.c: In function 'ps2ser_init':
ps2ser.c:155: error: 'UART_LCR' undeclared (first use in this function)
ps2ser.c:155: error: (Each undeclared identifier is reported only once
ps2ser.c:155: error: for each function it appears in.)
ps2ser.c:156: error: 'UART_DLL' undeclared (first use in this function)
ps2ser.c:157: error: 'UART_DLM' undeclared (first use in this function)
ps2ser.c:159: error: 'UART_IER' undeclared (first use in this function)
ps2ser.c:160: error: 'UART_MCR' undeclared (first use in this function)
ps2ser.c:161: error: 'UART_FCR' undeclared (first use in this function)
ps2ser.c:162: error: 'UART_FCR_ENABLE_FIFO' undeclared (first use in this function)
ps2ser.c:166: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_putc':
ps2ser.c:198: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c:200: error: 'UART_TX' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_getc_hw':
ps2ser.c:224: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c:225: error: 'UART_RX' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_interrupt':
ps2ser.c:293: error: 'UART_IIR' undeclared (first use in this function)

The board is orphaned, and AFAICT has reached EOL.
Drop support for it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-19 21:28:25 +02:00
Prafulla Wadaskar
5f30500316 cmd_ide: add support for Kirkwood
Added MVSATAC definitions to Kirkwood.
Added support for Kirkwood in cmd_ide.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-08-08 05:17:55 +05:30
Albert Aribaud
113bfe48bc cmd_ide: add support for orion5x
Add MVSATAHC definitions to orion5x.
Add support for orion5x in cmd_ide.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-08-08 05:17:06 +05:30
Albert Aribaud
f2a37fcd9b ide: add configuration
CONFIG_IDE_SWAP_IO

This configuration option replaces a complex conditional
in cmd_ide.c with an explicit define to be added to SoC or
board configs.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-08-08 05:17:05 +05:30
Wolfgang Denk
47e26b1bf9 cmd_usage(): simplify return code handling
Lots of code use this construct:

	cmd_usage(cmdtp);
	return 1;

Change cmd_usage() let it return 1 - then we can replace all these
ocurrances by

	return cmd_usage(cmdtp);

This fixes a few places with incorrect return code handling, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-24 20:43:57 +02:00
Wolfgang Denk
54841ab50c Make sure that argv[] argument pointers are not modified.
The hush shell dynamically allocates (and re-allocates) memory for the
argument strings in the "char *argv[]" argument vector passed to
commands.  Any code that modifies these pointers will cause serious
corruption of the malloc data structures and crash U-Boot, so make
sure the compiler can check that no such modifications are being done
by changing the code into "char * const argv[]".

This modification is the result of debugging a strange crash caused
after adding a new command, which used the following argument
processing code which has been working perfectly fine in all Unix
systems since version 6 - but not so in U-Boot:

int main (int argc, char **argv)
{
	while (--argc > 0 && **++argv == '-') {
/* ====> */	while (*++*argv) {
			switch (**argv) {
			case 'd':
				debug++;
				break;
			...
			default:
				usage ();
			}
		}
	}
	...
}

The line marked "====>" will corrupt the malloc data structures and
usually cause U-Boot to crash when the next command gets executed by
the shell.  With the modification, the compiler will prevent this with
an
	error: increment of read-only location '*argv'

N.B.: The code above can be trivially rewritten like this:

	while (--argc > 0 && **++argv == '-') {
		char *arg = *argv;
		while (*++arg) {
			switch (*arg) {
			...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-07-04 23:55:42 +02:00
Wolfgang Denk
cd47a83b07 cmd_ide.c: fix unused variable warning for SC3 board
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-04 23:49:33 +02:00
Wolfgang Denk
953b7e6291 Remove AmigaOneG3SE board
The AmigaOneG3SE board has been orphaned or a very long time, and
broken for more than 12 releases resp. more than 3 years.  As nobody
seems to be interested any more in this stuff we may as well ged rid
of it, especially as it clutters many areas of the code so it is a
continuous pain for all kinds of ongoing work.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-23 23:24:20 +02:00
Heiko Schocher
4b142febff common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08 22:14:07 +01:00
Heiko Schocher
3887c3fbdb mucmc52, uc101: delete ata@3a00 node, if no CF card is detected
U-Boot can detect if an IDE device is present or not.
If not, and this new config option is activated, U-Boot
removes the ATA node from the DTS before booting Linux,
so the Linux IDE driver does not probe the device and
crash. This is needed for buggy hardware (uc101) where
no pull down resistor is connected to the signal IDE5V_DD7.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-09-25 01:22:13 +02:00
Wolfgang Denk
3b74e7ec58 MPC512x: remove include/mpc512x.h
Move needed definitions (register descriptions etc.) from
include/mpc512x.h  into  include/asm-ppc/immap_512x.h.

Instead of using a #define'd register offset, use a function that
provides the PATA controller's base address.

All the rest of include/mpc512x.h are register offset definitions
which can be eliminated by proper use of C structures.

There are only a few register offsets remaining that are needed in
cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h
which is intended as a temporary workaround only. In a later patch
this file will be removed, too, and then auto-generated from the
respective C structs.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Wolfgang Denk
a89c33db96 General help message cleanup
Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-12 20:47:16 +02:00
Kim Phillips
2df72b82bc common: fix inline--weak error spotted by gcc 4.4
cmd_ide.c:547: error: inline function 'ide_inb' cannot be declared weak

removing the inline attribute fixes it.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-05-20 22:36:28 +02:00
Peter Tyser
67c2e57c08 cmd_ide: Remove unused AmigaOneG3SE code
The output_data_short() and input_data_short() functions for the
AmigaOneG3SE are unused and result in compiler warnings.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-28 01:03:13 +02:00
Mike Frysinger
6c6166f529 vsprintf: pull updates from Linux kernel
This brings in support for the %p modifier which allows us to easily print
out things like ip addresses, mac addresses, and pointers.

It also converts the rarely used 'q' length modifier to the common 'L'
modifier when dealing with quad types.

While this new code is a bit larger (~1k .text), most of it should be made
up by converting the existing ip/mac address code to use format modifiers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-20 22:39:09 +01:00
Ralph Kondziella
70a4da45e1 ADS5121 Add PATA support
Original patch from Ralph Kondziella
plus clean up by Wolfgang Denk
plus changes by John Rigby
    use ips clock not lpc
    port forward to current u-boot release

Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: John Rigby <jrigby@freescale.com>
2009-02-03 15:40:29 -07:00
Peter Tyser
2fb2604d5c Command usage cleanup
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28 08:49:52 +01:00
Peter Tyser
62c3ae7c6e Standardize command usage messages with cmd_usage()
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28 08:43:45 +01:00
Richard Retanubun
bcdf1d2cf6 common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
Corrected endian order printing for compact flash serial number.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2008-12-07 01:24:53 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00