Commit graph

23270 commits

Author SHA1 Message Date
Tom Rini
ebdd6afa54 Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-marvell into next
- Enable CONFIG_TIMER for all Kirkwood / MVEBU boards (Stefan)
- u-boot-spl.kwb/SPL: Add / improve size limit setup / detection (Pali)
- mvebu: theadorable: Misc updates in defconfig und dts (Stefan)
2022-09-20 08:50:07 -04:00
Tom Rini
245746e8e0 First set of u-boot-at91 features for the 2023.01 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmMoEdgcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyNvEB/4nEeiBx7Lo1gK+79PJ
 9kCUngglHRu3/+FJMpcOp+2b6sSW1IZs8qGBMAMFSRoFElrLMMbVEgBR0ZfJCl3c
 It0xN9Buhe8muwtAdE8Amr4PddUEynzglVPpFUFfir6ZqFAcedmN6iuh+K82r7Be
 7s/8tRb2hVp//TpkEntf2yxrYnyeW4qiXyUxbUhaUyyhkM3RBXySuY4qnaaLp3NY
 R9rsIY5j3kA2QylebEamlXI+KDvszrGbkUOUUrlwkygQNR/GmAYQPlY1TdBwk0wE
 U1CO8zQYaL3OY998lU32pMVClmwyXbn2i7KAyMm3TEgrfpjQsLTS2BK+w+RBdMGL
 XGnt
 =lRvM
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2023.01-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2023.01 cycle:

This feature set includes the important update on PIO4 pinctrl driver
that solves a long time mismatch between Linux and U-boot, related on
the unification of pinctrl and gpio driver support, now respecting the
pinctrl bindings ABI; and also support for pinctrl subnodes. The feature
set also adds support for PDA screen detection for sam9x60_curiosity
board , one fix for SD-Card reinsertion and one fix for sam9x60 clocks.
2022-09-20 08:49:36 -04:00
Stefan Roese
b81db4bfdd arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot, dm-pre-reloc" to timer DT node
Adding the "u-boot,dm-pre-reloc" DT property to the timer node is
necesssary to support the timer in the early boot phases (e.g.
SPL & pre-reloc).

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
d06ba5cc71 arm: mvebu: dts: armada-375.dtsi: Add timer0 & timer1
Add the DT bindings / descriptions for timer0 & timer1, exactly as done
in mainline Linux.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
0cc5d2321f arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step
This patch changes the compilation, so that the Armada 375 board(s) are
compiled in a separate step. This is necessary for the timer dts
conversion, as A375 has a different / timer description in the dts.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
7b530bb19e arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms
Now that the new timer support is available for these platforms, let's
select this IF for all these platforms. This way it's not necessary
that each board changes it's config header.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2022-09-20 06:39:43 +02:00
Stefan Roese
50e4d8511d arm: mvebu: theadorable: Update eth & mdio DT nodes
With the recent changes in the Marvel mvneta network driver, the MDIO
bus is not connected any more. This patch updates the DT nodes to use
the nodes from the dtsi files instead of creating ad-hoc nodes.

Signed-off-by: Stefan Roese <sr@denx.de>
2022-09-20 06:39:43 +02:00
Tom Rini
e9a1ff9724 Merge branch 'master' into next
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-19 16:07:12 -04:00
Tom Rini
c1db6be55d u-boot-imx-20220919
-------------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500
 
 - Fix imx8mn-beacon-kit-u-boot
 - Merged Purism
 - imxrt1170 (already merged in u-boot-imx)
 - Fixes in crypto FSL
 - Toradex : fixes Verdin
 - Serial Driver: fixes when not used as console
 - DH Boards : fixes + USB
 - Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig)
 - Add imx6ulz_smm_m2
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYyhfUg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bBfgCgkthrxcVGFDRGMqA2B4OkWjM7RjYAn0jn9dqO
 F1jZNNtXpdwDVljS1Xtv
 =Rnxw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220919' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220919
-------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500

- Fix imx8mn-beacon-kit-u-boot
- Merged Purism
- imxrt1170 (already merged in u-boot-imx)
- Fixes in crypto FSL
- Toradex : fixes Verdin
- Serial Driver: fixes when not used as console
- DH Boards : fixes + USB
- Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig)
- Add imx6ulz_smm_m2
2022-09-19 08:38:32 -04:00
Marek Behún
a0759684e0 powerpc: mpc85xx: Fix incorrect application of patch
I messed up application of patch 5a428e7510 ("mmc: fsl_esdhc_spl: Add
support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS"). I took it from
a work-in-progress branch where I changed usage of
  CONFIG_SDCARD to CONFIG_SD_BOOT
and refactored
  SYS_MPC85XX_NO_RESETVEC
mess.

But these changes aren't in master yet. Fix the wrong usage of these
macros.

Fixes: 5a428e7510 ("mmc: fsl_esdhc_spl: Add support for builds without
CONFIG_SYS_MMC_U_BOOT_OFFS")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-09-19 08:30:58 -04:00
Sergiu Moga
f02e52b7e6 ARM: dts: at91: sama7: Align with Linux Devicetree
This patch makes sure that the Devicetree for the sama7
boards are aligned with the Devicetree from Linux. This
implies removing the GPIO compatible and replacing it
with the PINCTRL one, as well as unifying the SDMMC
pinctrl related subnodes under one single subnode.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2022-09-19 09:51:04 +03:00
Sergiu Moga
2df729e96d ARM: dts: at91: sama5: Align with Linux Devicetree
This patch makes sure that the Devicetree for the sama5
boards are aligned with the Devicetree from Linux. This
implies removing the GPIO compatible and replacing it
with the PINCTRL one, as well as unifying the SDMMC
pinctrl related subnodes under one single subnode.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2022-09-19 09:51:04 +03:00
Durai Manickam KR
3534672200 ARM: dts: at91: sam9x60_curiosity: add onewire support
Add support for onewire memory.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
2022-09-19 09:50:17 +03:00
Michael Trimarchi
cc74cab86a bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.

Add support for imx6ulz BSH SMM M2 board:

- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 22:56:18 +02:00
Angus Ainslie
466a9ea2a1 board: purism: add the Purism Librem5 phone
Initial commit of Librem5 u-boot and SPL

Signed-off-by: Angus Ainslie <angus@akkea.ca>
Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 22:56:10 +02:00
Marek Vasut
2debd004fe ARM: dts: imx: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
Fix copy-paste error of the I2C5 bus recovery GPIO assignment,
the I2C5 GPIOs are on gpio3 instead of gpio5.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-09-18 22:56:10 +02:00
Marek Vasut
dd5ca87464 ARM: dts: imx: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM
The ECSPI1 is on I2C1/I2C2 pins of the SoC, update the pinmux accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-09-18 22:56:10 +02:00
Marek Vasut
866a33e478 ARM: dts: imx: Rename imx8mp-dhcom{-pdk2,}-boot.dtsi
Rename imx8mp-dhcom-pdk2-u-boot.dtsi to imx8mp-dhcom-u-boot.dtsi, since
this file is shared by PDK2, PicoITX and DRC02. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-09-18 22:56:10 +02:00
Marek Vasut
a5f29e72d3 ARM: dts: imx: Add SoM compatible to i.MX8M Plus DHCOM PDK2
Add SoM compatible string into i.MX8MP DHCOM PDK2 compatible strings.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-09-18 22:56:10 +02:00
Marek Vasut
aa87db42ff ARM: dts: imx: Drop Atheros PHY header from i.MX8M Plus DHCOM PDK2
This PHY is not used on PDK2, the header was added due to copy-paste
error, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-09-18 22:56:09 +02:00
Marek Vasut
d1aebfab75 ARM: dts: imx: Add HW variant details to i.MX8M Plus DHCOM PDK2
Add information about which exact SoM variant is used on which PDK2 variant.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-09-18 22:56:09 +02:00
Adam Ford
a18f23f977 arm: dts: imx8mn-beacon-kit-u-boot: Fix broken booting
When the imx8mm.dtsi file was pulled in from Linux, the UARTs
were moved into an spba sub-node which wasn't being included
in the SPL device tree.  This meant the references to the UART
weren't being handled properly and when booting the system would
constantly reboot.  Fix this by adding the spba node to the spl
device tree to restore normal booting.

Fixes: 4e5114daf9 ("imx8mn: synchronise device tree with linux")
Signed-off-by: Adam Ford <aford173@gmail.com>
2022-09-18 22:56:09 +02:00
Marcel Ziswiler
a8e518b80a imx: romapi: fix spurious ampersand in address print
Fix spurious ampersand in address print e.g.

	Find img info 0x&480331a0, size 855

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>"
2022-09-18 20:42:56 +02:00
Jesse Taube
505efde27a ARM: dts: imx: add i.MXRT1170-EVK support
The NXP i.MXRT1170 Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MXRT, which features NXP's implementation of the Arm
Cortex-M7 and Cortex-M4 core.

The EVK provides 64 MB SDRAM, Micro SD card socket,
USB 2.0 OTG.

This patch aims to support the preliminary booting up features
as follows:
GPIO
LPUART
SD/MMC
SDRAM

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-09-18 20:42:56 +02:00
Jesse Taube
a5b7a87673 ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header
Add binding header for i.MXRT1170 pinctrl device tree.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-09-18 20:42:56 +02:00
Jesse Taube
67e2df581c imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK
This commit adds board support for i.MXRT1170-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT117x processor family.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-09-18 20:42:56 +02:00
Stefan Roese
ff3fdfe89b watchdog: Get rid of ASSEMBLY hacks
Only one occurance of WATCHDOG_RESET is left in one assembler file.
This patch changes this occurance to a direct call to watchdog_reset
and then removes all the ASSEMBLY ifdef'ery in watchdog.h, as it's not
needed any more to clean this mess a bit up.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tom Rini <trini@konsulko.com> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
2022-09-18 10:26:39 +02:00
Stefan Roese
29caf9305b cyclic: Use schedule() instead of WATCHDOG_RESET()
Globally replace all occurances of WATCHDOG_RESET() with schedule(),
which handles the HW_WATCHDOG functionality and the cyclic
infrastructure.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
2022-09-18 10:26:33 +02:00
Pali Rohár
5a428e7510
mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS
When fixed offset via CONFIG_SYS_MMC_U_BOOT_OFFS is not specified then
expects that U-Boot proper is placed immediately after SPL without any
additional padding.

This allows to generate smaller SPL+U-Boot final binary as it is not
required to specify fixed offset to U-Boot proper at SPL compile time.

In this case offset to U-Boot proper is calculated at SPL compile time in
linker script.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
2022-09-16 18:46:14 +02:00
Pali Rohár
7696b80ec5
powerpc: mpc85xx: Fix loading U-Boot proper from SD card in SPL
Change 8-byte alignment of SPL binary to just 4-byte alignment as objcopy
trims trailing zero bytes when converting ELF file to RAW binary.

This is same fix for SPL linker script as was done fix for U-Boot linker
script in commit e8c0e0064c ("powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE
support").

It is required for the patch "mmc: fsl_esdhc_spl: Add support for builds
without CONFIG_SYS_MMC_U_BOOT_OFFS" which triggered this issue in SPL.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
2022-09-16 17:39:45 +02:00
Marek Behún
1e1d12adbc
powerpc: mpc85xx: Fix check for CONFIG_SDCARD
Commit d433c74eec ("Convert CONFIG_SDCARD et al to Kconfig") converted
SYS_EXTRA_OPTIONS=SDCARD or SPIFLASH to config options CONFIG_SDCARD and
CONFIG_SPIFLASH, but left one occurance unchanged.

Fix this.

Fixes: d433c74eec ("Convert CONFIG_SDCARD et al to Kconfig")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-09-16 17:39:43 +02:00
Pali Rohár
5af42eafd7
Makefile: Reduce usage of custom mpc85xx u-boot.bin target
Building of final u-boot.bin binary for mpc85xx via binman is needed only
when inserting DTB binary in the middle of the u-boot ELF binary (before
.bootpg and .resetvec ELF sections).

These requirements are met when CONFIG_MPC85XX_HAVE_RESET_VECTOR is enabled
(= generating .bootpg/.resetvec sections) and CONFIG_OF_SEPARATE is enabled
(= inserting DTB binary).

So in all other cases use standard build procedure instead of custom
mpc85xx u-boot.bin Makefile target via binman.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
2022-09-16 17:39:42 +02:00
Pali Rohár
d8fa0a7668
Makefile: Build final mpc85xx non-SPL image in standard file u-boot.bin
Currently Makefile produces final mpc85xx image when SPL is not used in
custom file u-boot-with-dtb.bin. It is quite confusing name as build
process produce also intermediate file standard file u-boot-dtb.bin (which
is just intermediate and not bootable). Other platforms use u-boot.bin
(UBOOT_BIN) as standard name for final bootable raw image.

So change Makefile rules and binman to produce final bootable file for
mpc85xx also into file u-boot.bin. There is just need for mpc85xx to not
define default rule for u-boot.bin then instruct binman (via DTS file) to
store final image into u-boot.bin (instead of u-boot-with-dtb.bin) and
finally rename target u-boot-with-dtb.bin to u-boot.bin.

With this change are also removed custom Makefile hacks for mpc85xx that it
produced non-standard output file. And also updated documentation.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
2022-09-16 17:39:41 +02:00
Simon Glass
e33a5c6be5 blk: Switch over to using uclass IDs
We currently have an if_type (interface type) and a uclass id. These are
closely related and we don't need to have both.

Drop the if_type values and use the uclass ones instead.

Maintain the existing, subtle, one-way conversion between UCLASS_USB and
UCLASS_MASS_STORAGE for now, and add a comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16 11:05:16 -04:00
Simon Glass
1bbfdc575c sandbox: Avoid defining HAVE_BLOCK_DEVICE in Konfig
This is not needed as it is implied or selected by other options anyway.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16 11:05:00 -04:00
Simon Glass
6b03b9d5b7 blk: Enable CONFIG_BLK for all media
Enable this option on all boards which support block devices. Drop the
related depencies on BLK since these are not needed anymore.

Disable BLOCK_CACHE on M5253DEMO as this causes a build error.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16 11:05:00 -04:00
Bernhard Messerklinger
febd82c45e brppt1: Cleanup device tree
* Remove unnecessary device tree nodes which are not needed in
  U-Boot directly.
* Move all U-Boot specific device tree properties to u-boot dtsi.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2022-09-15 14:22:08 -04:00
Bernhard Messerklinger
b0a18f1f9f brppt1: Fix SPL boot stage
Commit 6337d53fdf ("arm: dts: sync am33xx with Linux 5.9-rc7") syncs
the am335x device tree with the latest linux kernel am335x device tree.
That causes problems with device tree in SPL stage.
To fix the issues CONFIG_SPL_OF_TRANSLATE must be set to handle the
synced bus addresses correctly.
A custom U-Boot device tree is also needed since the SPL build removes
bus properties from bus nodes which are not explicitly marked with the
u-boot,dm-spl or u-boot,dm-pre-reloc flag. Therefore all parent buses of
the in the SPL needed devices must be marked with u-boot,dm-pre-reloc.
Also since there is no driver for "ti,sysc" compatible property in SPL
the buses marked with this compatible string must also be marked with
compatible = "simple-bus" to make the underlying devices visible in
SPL. Otherwise the matching device drivers aren't found and the uclass
drivers are dropped.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2022-09-15 14:22:08 -04:00
Bernhard Messerklinger
6dfc1f4c51 brppt1: Remove unused board variants
The SPI and NAND board variants never went into production.
Drop those board variants.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2022-09-15 14:22:08 -04:00
Stefan Herbrechtsmeier
b471bdc47b dm: core: Add functions to read 8/16-bit integers
Add functions to read 8/16-bit integers like the existing functions for
32/64-bit to simplify read of 8/16-bit integers from device tree
properties.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-14 15:23:03 -04:00
Nathan Barrett-Morrison
7a0d88076b Add in the ability to load and boot an uncompressed kernel image during the Falcon Mode boot sequence.
This is required for architectures which do not support compressed kernel images (i.e. ARM64).  This is only used while not booting via FIT image.

Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-09-14 15:23:03 -04:00
Chin-Ting Kuo
d37b4f37ea arm: dts: aspeed: Update SPI flash node settings
For both AST2500 and AST2600, there are three
SPI controllers, FMC(Firmware Memory Controller),
SPI1 and SPI2. The clock source is HCLK. Following
is the basic information for ASPEED SPI controller.

AST2500:
  - FMC:
      CS number: 3
      controller reg: 0x1e620000 - 0x1e62ffff
      decoded address: 0x20000000 - 0x2fffffff

  - SPI1:
      CS number: 2
      controller reg: 0x1e630000 - 0x1e630fff
      decoded address: 0x30000000 - 0x37ffffff

  - SPI2:
      CS number: 2
      controller reg: 0x1e631000 - 0x1e631fff
      decoded address: 0x38000000 - 0x3fffffff

AST2600:
  - FMC:
      CS number: 3
      controller reg: 0x1e620000 - 0x1e62ffff
      decoded address: 0x20000000 - 0x2fffffff

  - SPI1:
      CS number: 2
      controller reg: 0x1e630000 - 0x1e630fff
      decoded address: 0x30000000 - 0x3fffffff

  - SPI2:
      CS number: 3
      controller reg: 0x1e631000 - 0x1e631fff
      decoded address: 0x50000000 - 0x5fffffff

Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
2022-09-13 12:08:40 -04:00
Michal Simek
4e16826028 xilinx: Fix mdio bus description for vck190-sc
Current behavior is that eth_phy_get_mdio_bus

Net:   FEC: can't find phy-handle

ZYNQ GEM: ff0b0000, mdio bus ff0b0000, phyaddr 0, interface sgmii
eth0: ethernet@ff0b0000

Net:
ZYNQ GEM: ff0b0000, mdio bus ff0b0000, phyaddr 0, interface sgmii
eth0: ethernet@ff0b0000

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/5b7da5808136b3f579c0cf7a3431b56c758655e9.1662460749.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Michal Simek
5c341965dd ARM: zynq: DT: List OCM memory
Description OCM with mmio-sram driver. In 99% use cases OCM is mapped high
that's why it is placed on fixed location.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a951dbe885640197efe3e91bb9fa5caedb54b387.1662460712.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Michal Simek
41634fd24b ARM: zynq: Align qspi node name with Linux kernel
Nodes should follow generic rules where compatible and reg properties
should be listed on the top of node. That's why sync it up.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/922dca6227cb0aa4f79e6d3595c5f280ba020684.1662460540.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Michal Simek
9e89e30d4d arm64: versal: Define zynqmp_mmio_write() for versal
GQSPI driver is using it but this function is never called for Versal
because it is removed by linker. But function should be declared to avoid
this build warning:
drivers/spi/zynqmp_gqspi.c: In function 'zynqmp_qspi_set_tapdelay':
drivers/spi/zynqmp_gqspi.c:378:3: warning: implicit declaration of function
'zynqmp_mmio_write' [-Wimplicit-function-declaration]
  378 |   zynqmp_mmio_write(IOU_TAPDLY_BYPASS_OFST,

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20220825125906.11581-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-09-13 11:32:48 +02:00
Ovidiu Panait
f459986e86 microblaze: add arch_print_bdinfo() implementation
Allow bdinfo command to print icache/dcache information:
U-Boot-mONStR> bdinfo
boot_params = 0x00000000
DRAM bank   = 0x00000000
-> start    = 0x04000000
-> size     = 0x04000000
flashstart  = 0x00000000
flashsize   = 0x00000000
flashoffset = 0x00000000
baudrate    = 9600 bps
relocaddr   = 0x07f76000
reloc off   = 0x02f76000
Build       = 32-bit
current eth = unknown
ethaddr     = (not set)
IP addr     = <NULL>
fdt_blob    = 0x07fec7e0
new_fdt     = 0x00000000
fdt_size    = 0x00000000
lmb_dump_all:
 memory.cnt  = 0x1
 memory[0]      [0x4000000-0x7ffffff], 0x04000000 bytes flags: 0
 reserved.cnt  = 0x1
 reserved[0]    [0x7e94b8c-0x7ffffff], 0x0016b474 bytes flags: 0
devicetree  = embed
icache      = 32 KiB
icache line = 4 Bytes
dcache      = 32 KiB
dcache line = 4 Bytes

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220829170205.1274484-4-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-09-13 11:32:48 +02:00
Michal Simek
be3a73c0c4 ARM: zynq: Align bss and end of u-boot image to 64bits
The main reason is that DT memory reserved code is expecting DT to be 64bit
aligned. For more information take a look at commit 5bd5ee02b2 ("xilinx:
zynqmp: Check that DT is 64bit aligned").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9f3688cda188d8ea0b462df2aa08a10ddcc9c149.1661938136.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Piyush Mehta
1bff67eda7 arm64: zynqmp: add ref_clk property for REFCLKPER calculation
Added ref_clk 'ref' property for GUCTL_REFCLKPER and GFLADJ_REFCLK_FLADJ
calculation. This property configure correct value for SOF/ITP counter
and period of ref_clk.
This patch adds 'ref' property for both dwc3_0 and dwc3_1 cores.

Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/417545b948ea12a9301a5e80851f98523be2b443.1661259809.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Michal Simek
fd9c9f2932 arm64: zynqmp: Add missing tca6416 to zynqmp SC
Add missing tca6416 i2c gpio controller to SC dts file.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a19c191d0dffb213d9dc8809d22728d79cf73a22.1661259623.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Harini Katakam
ddcc161c4e arm: dts: Add xlnx prefix to GEM compatible string
cdns,zynq/zynqmp were recentle deprecated in Linux in favour of xlnx
prefix. Add this new compatible string and retain the existing string for
compatibility with uboot drivers.

Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a38b1b55132fc026cc09224dba61e42fd03b1a36.1661259558.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Amit Kumar Mahapatra
c8630167e0 arm64: zynqmp: Add mtd partition for secure OS storage area
Update MTD partitions of Kria device trees to allocate 128KB of QSPI
memory for secure OS. Increased "SHA256" partition size & changed
starting address of "User" partition to accommodate the new partition
"Secure OS Storage"

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9cc64b8c731d11439de73d0af54c65080068f00b.1661242681.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Pali Rohár
5818198e6a arm: mvebu: Fix moving internal registers
Commit 5bb2c550b1 ("arm: mvebu: Move internal registers in
arch_very_early_init() function") moved code from file cpu.c to lowlevel.c,
which moves Marvell internal registers from address INTREG_BASE_ADDR_REG to
SOC_REGS_PHY_BASE.

But the steps describing how to do it correctly were documented only in
older U-Boot versions and commit cefd764222 ("arm: mvebu: Fix internal
register config on A38x") probably unintentionally removed important
details about MMU from code comments around.

Commit 5bb2c550b1 ("arm: mvebu: Move internal registers in
arch_very_early_init() function") implemented code movement according to
(now incomplete) comments which resulted in semi-broken code.

The result is that I-cache is currently disabled for all Armada 38x boards
and maybe there are some other (unreported / undetected) issues.

Reimplement it correctly. First flush all caches, then disable MMU and L2
cache and then move Marvell internal registers. There is no need to
explicitly disable I-cache.

After this change lzmadec command with lzma image of 0x7000000 bytes is
doing decompression just 5 seconds. Before this change it was 30 seconds.

To make lowlevel.S code more readable, extend asm/pl310.h header file to be
compatible with assembler and use macros from this file.

Fixes: 5bb2c550b1 ("arm: mvebu: Move internal registers in arch_very_early_init() function")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-13 09:04:22 +02:00
Pali Rohár
4f2333ba88 arm: mvebu: Enable L2 cache also on Armada 38x
For some unknown reason when L2 cache is disabled on Armada 385 then loadb,
loadx and loady commands do not work with higher baudrates than 115200
(they just abort transfer) and lzmadec command with lzma image of size
0x7000000 (maybe even smaller, we tested this one) is doing decompression
for more than 2 minutes. After enabling L2 cache decompression takes only
30s and loadb, loadx and loady are stable and working fine.

git bisect identified problematic commit 3308933d2f ("arm: mvebu: Avoid
reading MVEBU_REG_PCIE_DEVID register too many times"). Before this commit
above issues were not present.

But investigation showed that above issue was possible to reproduce also by
reverting that commit and forcing compiler to do inline optimization of
mvebu_soc_family() function. Which seems that the root of this issue is in
caches and position of instruction of segments. So currently it is unknown
what is or was broken, but code movement, code inlining or other compiler
optimization triggered it.

Commit 3e5ce7ceeb ("arm: mvebu: Enable L2 cache on Armada XP") mentioned
that enabling L2 cache on Armada XP improved performance and that Armada
38x has L2 disabled (which is default state) and if needed it has to be
enabled in separate patch. As enabling L2 cache also improve performance
on Armada 38x, enable it.

Note that Aurora cache in no outer mode is available only on Armada XP,
hence it is not touched for Armada 38x code.

Fixes: 3308933d2f ("arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-13 09:04:22 +02:00
Pali Rohár
a7199f4493 arm: mvebu: lowlevel.S: Use CR_M from asm/system.h
Replace magic constant 1 when disabling MMU by macro CR_M from include
header file asm/system.h.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-13 09:04:22 +02:00
Pali Rohár
2a0d9ae414 arm: mvebu: Guard non-AXP code by checking for AXP
Commit c86d53fd88 ("arm: mvebu: Don't disable cache at startup on Armada
XP at all") introduced branch for non-AXP code which was guarded by A38X
condition. Fix this issue by checking for AXP platform, not by A38X.

Fixes: c86d53fd88 ("arm: mvebu: Don't disable cache at startup on Armada XP at all")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-13 09:04:22 +02:00
Pali Rohár
117ef65502 arm: mvebu: Fix function enable_caches
Commit 3308933d2f ("arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID
register too many times") broke support for caches on all Armada SoCs.

Before that commit there was code:

    if (mvebu_soc_family() != MVEBU_SOC_A375) {
        dcache_enable();
    }

And after that commit there is code:

    if (IS_ENABLED(CONFIG_ARMADA_375)) {
        dcache_enable();
    }

Comment above this code says that d-cache should be disabled on Armada 375.
But new code inverted logic and broke Armada 375 and slowed down all other
Armada SoCs (including A38x).

Fix this issue by changing logic to:

    if (!IS_ENABLED(CONFIG_ARMADA_375)) {
        dcache_enable();
    }

Which matches behavior prior that commit.

Fixes: 3308933d2f ("arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-13 09:04:22 +02:00
Pali Rohár
b120519d76 arm: mvebu: Mark constant data with const keyword
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-13 06:38:08 +02:00
Stefan Herbrechtsmeier
b7e0750d88 zynq: Convert arm twd timer to DM driver
Move arm twd timer driver from zynq to generic location.

DM timer drivers are designed differently to original driver. Timer is
counting up and not down.
Information about clock rates are find out in timer_pre_probe() that's
why there is no need to get any additional information from DT in the
driver itself (only register offset).

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220805061629.1207-1-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-09-12 12:03:17 +02:00
Tom Rini
e9de8c8c64 - simplify the STM32MP15x package parsing code
- remove test on CONFIG_DM_REGULATOR in stm32mp1 board
   and enable CONFIG_DM_REGULATOR for stm32f769-disco
 - handle ck_usbo_48m clock provided by USBPHYC to fix the command 'usb start'
   after alignment with Linux kernel v5.19 DT (clocks = <&usbphyc>)
 - Fix SYS_HZ_CLOCK value for stih410-b2260 board
 - Switch STMM32MP15x DHSOM to FMC2 EBI driver
 - Remove hwlocks from pinctrl in STM32MP15x to avoid issue with kernel
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmMZoW4ACgkQ4rK92eCq
 k3W2MAgAsmy2aSlMYo/AGlJ/KCrZuk6OirNHtdOdacvbcdUUbpkNpBSjdkrRm2If
 VUnY1utIIJe6gFgnBUxXJ3RF5FZuhkdawc6V25HtDp6H3WamzJknKs5Vc4TlKp59
 hZCOto7/+G/cd2XLdCKFUBl+new1pdDPsEm56+57DeZ7QGAQRX35PUQ5+HBjQJ/N
 n/wJgS6wkEdIQLLwmCVxbHUkC+pRotTza5F2A0qZJgYPMcMpVFYKtzIa4GbWB5YS
 MKGHbM8f3C8RLPQaHHTRycoA2Yor1I52B4Oi7605c5zHQr9pjrgtWsernDzkIhsB
 ThYHSYQBUBTY4HBfzFwzCkVGqqLWNg==
 =PMFY
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220907' of https://source.denx.de/u-boot/custodians/u-boot-stm

- simplify the STM32MP15x package parsing code
- remove test on CONFIG_DM_REGULATOR in stm32mp1 board
  and enable CONFIG_DM_REGULATOR for stm32f769-disco
- handle ck_usbo_48m clock provided by USBPHYC to fix the command 'usb start'
  after alignment with Linux kernel v5.19 DT (clocks = <&usbphyc>)
- Fix SYS_HZ_CLOCK value for stih410-b2260 board
- Switch STMM32MP15x DHSOM to FMC2 EBI driver
- Remove hwlocks from pinctrl in STM32MP15x to avoid issue with kernel
2022-09-08 08:33:41 -04:00
Sean Anderson
bdbdaede67 ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop
This reduces sec_firmware_get_data to a single call to
fit_get_data_conf_prop. I think sec_firmware_check_copy_loadable could also
be converted, but it does not map as straightforwardly, so I have left it
for a future cleanup.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-09-07 13:40:45 +08:00
Sean Anderson
1b0e98221d ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME
The config to use for FIT images can be better specified by enabling
CONFIG_MULTI_DTB_FIT and implementing board_fit_config_name_match.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-09-07 13:40:43 +08:00
Etienne Carriere
d6ff3c9f04 ARM: dts: stm32mp15: remove hwlocks from pinctrl
Removes hwlocks properties from stm32mp151 pinctrl node. These locks
could be used for other purpose, depending on board and software
configuration hence do not enforce their use to protect pinctrl
devices.

This patch is an alignment with Linux device tree with v6.0 as the
hwsem support wasn’t yet added in pincontrol in kernel. It avoids
issues when the Linux kernel is started with the U-Boot device tree.

Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-09-06 15:40:14 +02:00
Marek Vasut
9cccc358c4 ARM: stm32: Switch DHSOM to FMC2 EBI driver
Perform long overdue conversion of ad-hoc FMC2 EBI bus initialization
to upstream FMC2 EBI driver. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-09-06 15:33:07 +02:00
Tom Rini
59c51fa4ab Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2022-09-06 09:01:39 -04:00
Tom Rini
166d2693dd Merge tag 'fsl-qoriq-2022-9-6' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Reset fixes for p1_p2_rdb_pc
Fix use after free issue fix in fsl_enetc.c
Fix for fsl ddr: make bank_addr_bits reflect actual bits
sl28 board update
2022-09-06 08:59:51 -04:00
Patrice Chotard
5468dc82cb ARM: dts: stm32: Fix display-timings settings for stm32f746-disco
Since commit ef4ce6df32 "video: stm32: stm32_ltdc: fix data enable polarity"
The panel display output wasn't functional anymore.
Device tree display-timings de-active property value must be updated
to 1.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-09-06 14:09:05 +02:00
Patrick Delaunay
50b2184257 stm32mp: simplify the STM32MP15x package parsing code
Simplify the package parsing code for STM32MP15X as package can be
affected with get_cpu_package() result.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-06 13:54:50 +02:00
Pali Rohár
44366be10a board: freescale: p1_p2_rdb_pc: Turn off watchdog before reset
P1/P2 RDB boards have external max6370 watchdog connected to CPLD and this
watchdog is not deactivated on board reset. So if it is active during board
reset, it can trigger another reset when CPU is booting U-Boot. To prevent
possible infinite reset loop caused by external watchdog, turn it off
before reset.

Do it via a new board_reset_prepare() callback which is called from
do_reset() function before any reset sequence.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-09-06 14:08:35 +08:00
Pali Rohár
7e962cb132 board: freescale: p1_p2_rdb_pc: Avoid usage of CPLD's system reset register
CPLD's system reset register is buggy and requires workaround in U-Boot.
So use this kind of board reset only when there is no other reset option.

Introduce a new board_reset_last() callback which is last-stage
board-specific reset and implement CPLD's system reset in this new
board_reset_last() callback instead of board_reset() callback.

Fixes: 20fb58fc5a ("board: freescale: p1_p2_rdb_pc: Implement board_reset()")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-09-06 14:08:34 +08:00
Icenowy Zheng
ac48fc3deb riscv: dts: sifive: Synchronize FU740 and Unmatched DT
These DT files are synchronized from Linux 5.19.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-09-06 13:00:41 +08:00
Icenowy Zheng
d13cd77068 dt-bindings: clock: sifive: sync FU740 PRCI clock binding header
This commit sychronizes the header file for FU740 PRCI clocks with the
one from Linux 5.19.

The constant values are the same, but all constant names are changed
(most are just prefixed with FU740_).

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-09-06 13:00:15 +08:00
Michael Walle
6622c30f2e armv8: layerscape: spl: mark OCRAM as non-secure
By default the OCRAM is marked as secure. While the SPL runs in EL3 and
thus can access it, DMA devices cannot. Mark the whole OCRAM as
non-secure.
This will fix MMC and SD card boot on LS1028A when using SPL instead of
TF-A.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-09-06 09:10:41 +08:00
Jessica Clarke
b236a66ab5 riscv: dts: Sync important Unmatched pmic and qspi0 changes from Linux
This adds the onkey, RTC and watchdog children to the DA9063 PMIC node,
fixes the compatible for qspi0's flash node to match the official DT
schema (it being an is25wp256 is discoverable, hence jedec,spi-nor is
the only compatible that should be present) and exposes the card detect
GPIO.

Note that the device trees still diverge in some places (including
important things like the PCIe controller's clock name) and should be
cleaned up so that a common device tree is used in both projects rather
than having different bindings. This patch does not attempt to do that,
merely expose important functionality present in Linux's that is not in
U-Boot's so that it can be used without the OS providing its own bundled
copy.

Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-09-05 20:36:44 +08:00
Tom Rini
05f135ab3e Merge tag 'u-boot-rockchip-20220905' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- migrate to use binman for U-Boot image generate on rockchip platform;
- Some fixes for rk3399 and rk3308;
2022-09-04 22:35:40 -04:00
Quentin Schulz
e1faa535b9 rockchip: add u-boot-rockchip-spi.bin image for booting from SPI-NOR flash
This new image is similar to u-boot-rockchip.bin except that it's
destined to be flashed on SPI-NOR flashes.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-04 20:00:39 +08:00
Quentin Schulz
a4bb36df49 rockchip: allow to build SPI images even without HAS_ROM option
This prepares for the creation of a u-boot-rockchip-spi.bin image
similar to u-boot-rockchip.bin to the exception it's destined for
SPI-NOR flashes instead of MMC storage medium.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-09-04 20:00:39 +08:00
Quentin Schulz
05713d5707 rockchip: generate u-boot-rockchip.bin with binman for ARM64 boards
This allows to build u-boot-rockchip.bin binary with binman for Rockchip
ARM64 boards instead of the legacy Makefile way.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-04 20:00:39 +08:00
Quentin Schulz
001f788cdb rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM
idbloader.img content - currently created by way of Makefile - can be
created by binman directly.

So let's do that for Rockchip ARM platforms.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-09-04 20:00:39 +08:00
Quentin Schulz
7a81a44caf rockchip: rk3399: sync spl_boot_devices_tbl and boot_devices node paths
While technically not a bug, let's have some consistency in paths
returned by u-boot,spl-boot-order look-up and the one saved in
u-boot,spl-boot-device by syncing spl_boot_devices_tbl and boot_devices
node paths.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Tested-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
Reviewed-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-09-04 20:00:39 +08:00
Quentin Schulz
72ebe8b8cb rockchip: rk3399: fix incorrect boot-device in u-boot, spl-boot-device
On RK3399, mmc0 is eMMC and mmc1 is SD card, c.f. console:
MMC:   mmc@fe320000: 1, mmc@fe330000: 0

In arch/arm/mach-rockchip/spl-boot-order.c:board_boot_order, the
boot_device (BOOT_DEVICE_*) value is gotten from spl_node_to_boot_device
function. Said function returns BOOT_DEVICE_MMC1 for mmc0 (eMMC) and
BOOT_DEVICE_MMC2 for mmc1 (SD card).

Since the SD card controller is at mmc@fe320000, it should be associated
with BOOT_DEVICE_MMC2 and not BOOT_DEVICE_MMC1. Same applies to eMMC.

Let's fix that by swapping the two BOOT_DEVICEs.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Tested-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
2022-09-04 20:00:38 +08:00
John Keeping
74f7025ea6 rockchip: rk3308: fix same-as-spl boot order
Rockchip SoCs need the boot_devices array defined in order to map the
bootloader's value to a U-Boot device.  Implement this for rk3308.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-09-04 20:00:38 +08:00
Quentin Schulz
07b5d348a6 rockchip: rk3399: boot_devices: fix eMMC node name
When idbloader.img is flashed on the eMMC, the SPL still tries to load
from SPI-NOR first.

This is due to an incorrect look-up in the Device Tree. Since commit
822556a934 ("arm: dts: sync the Rockhip 3399 SoCs from Linux"), the
node name (but not label) changed from sdhci@fe330000 to mmc@fe330000
meaning U-Boot SPL is not looking for the correct node name anymore and
fails to find the "same-as-spl" node when eMMC is the medium from which
the SPL booted.

Fixes: 822556a934 ("arm: dts: sync the Rockhip 3399 SoCs from Linux")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
Reviewed-by: Artem Lapkin  <email2tema@gmail.com>
Tested-by: Artem Lapkin  <email2tema@gmail.com>
Tested-by: Lapkin Artem <email2tema@gmail.com>
Tested-by: Lapkin Artem <email2tema@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-09-04 20:00:38 +08:00
Johan Jonker
69820e02d2 arm: dts: rockchip: rk3288: rename mmc nodenames
The boot_devices constants for rk3288 were changed to match the
binding, but the dtsi file was not synced.
Fix by renaming the rk3288 mmc node names.
Also correct the clock name for "ciu-drive".

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-09-04 20:00:38 +08:00
Simon Glass
ea94d053e1 test: Allow running tests multiple times
Some tests can have race conditions which are hard to detect on a single
one. Add a way to run tests more than once, to help with this.

Each individual test is run the requested number of times before moving
to the next test. If any runs failed, a message is shown.

This is most useful when running a single test, since running all tests
multiple times can take a while.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:21:44 -04:00
Simon Glass
a55014d09b Makefile: Allow LTO to be disabled for a build
LTO (Link-Time Optimisation) is an very useful feature which can
significantly reduce the size of U-Boot binaries. So far it has been
made available for selected ARM boards and sandbox.

However, incremental builds are much slower when LTO is used. For example,
an incremental build of sandbox takes 2.1 seconds on my machine, but 6.7
seconds with LTO enabled.

Add a NO_LTO parameter to the build, similar to NO_SDL, so it can be
disabled during development if needed, for faster builds.

Add some documentation about LTO while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:20:11 -04:00
Sergei Antonov
583f1b2f10 arm: ARMv4 assembly compatibility
There is currently a problem that U-Boot can not work on ARMv4
because assembly imlementations of memcpy() and some other functions
use "bx lr" instruction that is not available on ARMv4 ("mov pc, lr"
should be used instead).

A working preprocessor-based solution to this problem is found in
arch/arm/lib/relocate.S. Move it to the "ret" macro in
arch/arm/include/asm/assembler.h and change all "bx lr" code
to "ret lr" in functions that may run on ARMv4. Linux source code
deals with this problem in the same manner.

v1 -> v2:
Comment update. Pointed out by Andre Przywara.

Signed-off-by: Sergei Antonov <saproj@gmail.com>
CC: Samuel Holland <samuel@sholland.org>
CC: Ye Li <ye.li@nxp.com>
CC: Simon Glass <sjg@chromium.org>
CC: Andre Przywara <andre.przywara@arm.com>
CC: Marek Vasut <marex@denx.de>
CC: Sean Anderson <sean.anderson@seco.com>
CC: Tom Rini <trini@konsulko.com>
2022-09-02 13:40:42 -04:00
Geert Uytterhoeven
68083b897b renesas: Fix RPC-IF compatible values
The compatible values used for device nodes representing Renesas Reduced
Pin Count Interfaces were based on preliminary versions of the Device
Tree Bindings.

Correct them in both DTSi files and drivers, to match the final DT
Bindings.

Note that there are no DT bindings for RPC-IF on RZ/A1 yet, hence the
most logical SoC-specific value is used, without specifying a
family-specific value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-09-02 13:25:01 +02:00
Geert Uytterhoeven
e17205d067 ARM: dts: rmobile: Fix RPC-IF device node names
According to the Generic Names Recommendation in the Devicetree
Specification Release v0.3, and the DT Bindings for the Renesas Reduced
Pin Count Interface, the node name for a Renesas RPC-IF device should be
"spi".  Especially on R-Car Gen3 and RZ/G2, the node name matters, as
the node is enabled by passing a DT fragment from TF-A to U-Boot, and
from U-Boot to subsequent software.

Fix this by renaming the device nodes from "rpc" to "spi".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-09-02 13:25:01 +02:00
Philip Oberfichtner
b6664eace8 ARM: cache: Allow SPL to build cache-pl310.c
Introduce the new Kconfig symbol CONFIG_SPL_SYS_L2_PL310 to allow the
SPL to build cache-pl310.c.

Before this commit, the SPL could enable the PL310 L2 cache [1], but the
cache maintenance functions from cache-pl310.c were only useable for
non-SPL builds.

After enabling the cache one must be able to flush it, too. Thus this
commit allows cache-pl310.c to be included in the SPL build.

[1] See for example arch/arm/mach-imx/cache.c: v7_outer_cache_enable()

Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-09-01 17:18:42 -04:00
Philip Oberfichtner
111688839a Convert CONFIG_SYS_L2_PL310 to Kconfig
This converts CONFIG_SYS_L2_PL310 to Kconfig.

For omap2 and mvebu the 'select SYS_L2_PL310' locations were
determined using ./tools/moveconfig -i CONFIG_SYS_L2_PL310.

For mx6 I manually chose ARCH_MX6 as 'select' location. The
correctness has been verified using

	$ ./tools/moveconfig.py -f ARCH_MX6 ~SYS_L2_PL310 ~SYS_L2CACHE_OFF
	0 matches

That means whenever an ARCH_MX6 board had SYS_L2_PL310 disabled, this
was correctly reflected in SYS_L2CACHE_OFF. Thus it's safe to insert
the 'select' statement under ARCH_MX6.

Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-09-01 17:18:42 -04:00
Sean Anderson
f4b540e25c arm: smh: Fix uninitialized parameters with newer GCCs
Newer versions of GCC won't initialize parts of structures which don't
appear to be used. This results in uninitialized semihosting parameters
passed via R1. Fix this by marking the inline assembly as clobbering
memory.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-08-31 12:21:47 -04:00
Sumit Garg
0ddabb6830 arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings
Currently for all Qcom SoCs/boards there are separate compatibles for
GPIO and pinctrl. But this is inconsistent with official (upstream) Linux
bindings which requires only a single compatible "qcom,<SoC name>-pinctrl"
and there is no such compatible property as "qcom,tlmm-<SoC name>".

So fix this inconsistency for Qcom SoCs in order to comply with upstream
DT bindings. This is done via removing compatibles from "msm_gpio" driver
and via binding to "msm_gpio" driver from pinctrl driver in case
"gpio-controller" property is specified for pinctrl node.

Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:46 -04:00
Sumit Garg
a4b99582bb pinctrl: sdm845: Remove redundant CONFIG_SDM845 check
DT compatible is sufficient to make platform specific differentiation,
so remove redundant CONFIG_SDM845 check.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-08-26 10:55:46 -04:00
Sumit Garg
106822de5e board: qcs404-evb: Enable USB3 specific PMIC GPIO
For USB3 host controller to detect devices on the bus it is required to
enable a PMIC GPIO: usb_vbus_boost_pin. So enable that during board
specific initialization.

And since this PMIC GPIO parsing is quite u-boot specific, so add a
DT override to qcs404-evb-uboot.dtsi to represent usb_vbus_boost_pin.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:46 -04:00
Sumit Garg
9c96a0c62a dts: qcs404-evb: Add PMIC GPIO controller node
PMIC GPIOs are special GPIOs which are accessible through SPMI bus. So
add corresponding DT nodes.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:46 -04:00
Sumit Garg
0c1eab6f75 dts: qcs404-evb: Add USB controller and PHY nodes
QCS404 SoC provides support for two USB controllers: one USB3 and the
other one being USB2. The USB3 controller supports further 2 PHY: one high
speed PHY and the other super speed PHY. The USB2 controller supports a
single high speed PHY. So add corresponding DT nodes.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:45 -04:00
Sumit Garg
968597b85c clocks: qcs404: Add support for USB clocks
Add support for USB controller and PHY clocks for QCS404 SoC.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:45 -04:00
Sumit Garg
c9e384e9b6 clocks: qcom: Add clock enable callback support
Drivers like USB, ethernet etc. uses ".enable" hook to enable clocks.
So add corresponding support for Qcom clock drivers.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:45 -04:00
Sumit Garg
21ed4563cb dts: qcs404-evb: Add reset controller node
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:45 -04:00
Davidson K
42f051ceb6 arm: total_compute: enable psci
psci is used for system reset

Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
2022-08-26 10:55:45 -04:00
Michael Walle
5dbf2f0de7 board: lsxl: disable eth0
The board has only one network interface. The linux kernel will
gracefully skip a the ethernet interface if no connected PHY could be
probed. u-boot on the other hand will throw an error message. The kernel
device tree is about to be fixed. For now, just disable the ethernet
interface in our -u-boot.dtsi.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:40:27 +02:00
Michael Walle
7c9bd92eea board: lsxl: convert to DM_GPIO
Use the new mvebu GPIO driver and convert all the function calls to the
former kirkwood GPIO driver. This means that we are now using the LED
uclass and the regulator uclass. Unfortunately, the GPIO LED doesn't
offer a blinking method. Thus we are now stuck with solid on and off
states, which makes debugging a bit harder. Also, there is no GPIO fan
driver for now.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:40:06 +02:00
Michael Walle
aa088beac3 board: lsxl: make last resort recovery more reliable
If something is wrong with the environment, we cannot rely on a proper
u-boot operation anymore. In fact, it is possible, that we never reach
misc_init_r() with a broken environment.

Also don't enable the netconsole by environment settings. This way the
user don't have to reconfigure the environment. Instead the network
console is only enabled when the push button is pressed during boot.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:40:00 +02:00
Michael Walle
7717c2faf8 board: lsxl: automatically select CONFIG_MISC_INIT_R
The board code needs this to be set. Otherwise, the recovery mechanism
doesn't work. Therefore, select this option automatically with the
board.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:36 +02:00
Michael Walle
78c9b85df8 arm: kirkwood: make it CONFIG_TIMER aware
If we switch to CONFIG_TIMER, we don't need the legacy timer macros and
functions anymore. Add the proper guards to exclude them from compiling.

Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:38:54 +02:00
Pali Rohár
f395cf9cac arm: kirkwood: 88f6281: Detect CONFIG_SYS_TCLK from SAR register
Bit 21 in SAR register specifies if TCLK is running at 166 MHz or 200 MHz.
This information is undocumented in public Marvell Kirkwood Functional
Specifications [2], but is available in Linux v3.15 kirkwood code [1].

Commit 8ac303d49f ("arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK")
broke support for Marvell 88F6281 SoCs because it was expected that all
those SoCs have TCLK running at 200 MHz as specified in Marvell 88F6281
Hardware Specifications [3].

Fix broken support for 88F6281 by detecting CONFIG_SYS_TCLK from SAR
register, like it was doing Linux v3.15.

[1] - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm/mach-kirkwood/common.c?h=v3.15#n542
[2] - https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
[3] - https://web.archive.org/web/20120620073511/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf

Update by Stefan 2022-08-23:
- Fix compilation error for ds109

Fixes: 8ac303d49f ("arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:38:47 +02:00
Pali Rohár
5692e5b244 arm: mvebu: mbus: Fix mbus driver to work also after U-Boot relocation
mbus driver is initialized from arch_cpu_init() callback which is called
before relocation. This driver stores lot of functions and structure
pointers into global variables, so it is data position dependent.

Therefore after relocations all pointers are invalid and driver does not
work anymore as all pointers referes to the old memory, which overlaps with
CONFIG_SYS_LOAD_ADDR and ${loadaddr}.

For example U-Boot fuse command crashes if loadaddr memory is cleared or
rewritten by some image loaded by U-Boot load command.

  mw.w ${loadaddr} 0x0 10000
  fuse read 0 1 2

Fix this issue by removing of all mbus global variables in which are stored
pointers to structures or functions which changes during relocation. And
replace it by direct function calls (not via pointers). With this change
fuse command finally works.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:35:37 +02:00
Pali Rohár
397626ced6 arm: mvebu: Define env_sf_get_env_addr() for all Armada boards in SPL
SPI0 CS0 Flash is mapped to address range 0xD4000000 - 0xD7FFFFFF by BootROM.
Proper U-Boot removes this direct mapping. So it is available only in SPL.
This applies for all 32-bit Armada BootROMs. SPL mvebu code is used only on
32-bit Armada SoCs. So move env_sf_get_env_addr() function from Turris
Omnia board to common SPL mvebu code and add proper checks for SPI0 CS0.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 10:48:59 +02:00
Holger Brunck
845102cbe9 powerpc: remove support for kmtergr1 and MPC8309
The kmtegr1 board is out of maintenance and can be removed. As it is the
only board in the tree using MPC8309 the support for this CPU is dropped
completely.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-08-20 22:45:00 -04:00
Tom Rini
c50ff4a933 arm: Remove warp board
This board is missing migration to CONFIG_DM, which had a deadline of
v2020.01, which is now more than 2 years passed due.  Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 22:45:00 -04:00
Tom Rini
0040ed7e0c ppc: Remove corenet_ds boards
These boards have been orphaned for some time and are behind on various
DM migrations. Remove them.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
cd9b71c3f6 layerscape: Disable CONFIG_FMAN_ENET on *aqds* platforms
The *aqds* platforms have not been migrated to be able to enable
CONFIG_DM_ETH with CONFIG_FMAN_ENET. Disable CONFIG_FMAN_ENET on these
platforms.

Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: Pramod Kumar <pramod.kumar_1@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
9d7add8ac9 net: lpc32xx_eth.c ethernet driver
This driver has not been converted to DM_ETH.  The migration
deadline passed 2 years ago.

Cc: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Ramon Fried <rfried.dev@gmail.com>
2022-08-20 21:18:15 -04:00
Tom Rini
40463b9c4a arm: Remove kzm9g board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
0fb054b3f7 arm: Remove armadillo-800eva board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
d8d5ab40d5 arm: Remove cm_t335 board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
5663b137e6 arm: Remove edminiv2 board
This board is not converted to use CONFIG_DM, well passed the migration
deadline.  Remove it.

Cc: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-20 21:18:15 -04:00
Rasmus Villemoes
4b05301979 arm64: explicitly disable pointer authentication instructions
The Yocto project builds their aarch64 cross-compiler with the
configure knob --enable-standard-branch-protection, which means that
their gcc behaves as if -mbranch-protection=standard is passed; the
default (lacking that configure knob) is -mbranch-protection=none.

This means that when building U-Boot using the Yocto toolchain, most
functions end up containing paciasp/autiasp/bti instructions. However,
since U-Boot is not an ordinary userspace application, there's no OS
kernel which has set up the required authentication keys, so these
instructions do nothing at all (even on arm64 hardware that does have
the pointer authentication capability). They do however make the image
larger.

It is theoretically possible for U-Boot to make use of the pointer
authentication protection - cf. the linux kernel's
CONFIG_ARM64_PTR_AUTH_KERNEL - but it is far from trivial, and it's
hard to see just what threat model it would protect against in a
bootloader context. Regardless, we certainly have none of the required
infrastructure now, so explicitly pass -mbranch-protection=none to
ensure those useless instructions do not get emitted.

For a toolchain not configured with
--enable-standard-branch-protection, this changes nothing. For the
Yocto toolchain, this reduces the size of both SPL and U-Boot proper
by about 3% for my imx8mp target.

If you don't have a Yocto toolchain, the effect can easily be
reproduced by applying this patch and changing =none to =standard.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-20 18:12:37 -04:00
Matwey V. Kornilov
297c439b37 Restore pcm051_rev3_defconfig config
pcm051_rev3_defconfig config (Phytec Wega board) has been dropped in

    64efd11d ("arm: Remove pcm051 board")

due to expired migration deadlines. Here, pcm051_rev3_defconfig support is
reintroduced.

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-08-20 16:40:14 -04:00
Pali Rohár
9ca6c91732 Nokia RX-51: Move board required options from defconfig to Kconfig
Some of config options are board specific and should be set in into their
default values automatically. So move them from defconfig file to Kconfig
definitions to ensure that possible user custom defconfig files would have
these required options also enabled.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20 16:18:40 -04:00
Pali Rohár
c5be5f6f54 Nokia RX-51: Use U-Boot generic position independent code
Switch from custom board specific fixup/copy code to U-Boot generic
position independent code provided by config option POSITION_INDEPENDENT.

This also slightly decrease size of u-boot.bin binary (by 52 bytes). Note
that option POSITION_INDEPENDENT increase size but not more than custom
board fixup/copy code which is being deleted (as it is not needed anymore).

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20 16:17:50 -04:00
Pali Rohár
012d4be439 arm: Set default MACH_TYPE in Kconfig
For boards which requires correct MACH_TYPE, set their correct default
values directly in Kconfig.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20 16:17:50 -04:00
Gaurav Jain
47465877a5 ls1021atwr: caam: Enable Uboot validaion in SPL.
caam driver model enabled in spl for secure boot.
fsl_rsa_mod_exp driver enabled in spl for validating uboot image.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
2022-08-16 17:07:30 +08:00
Tom Rini
08f80184a9 arm: Remove snapper9260 board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-12 16:10:50 -04:00
Tom Rini
7751f54f91 ppc: Remove ids8313 board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Heiko Schocher <hs@denx.de>
2022-08-12 16:10:50 -04:00
Tom Rini
ff4e87c030 Convert CONFIG_SYS_FSL_QMAN_V3 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_NGPIXIS
   CONFIG_SYS_FSL_QMAN_V3
   CONFIG_SYS_FSL_RAID_ENGINE
   CONFIG_SYS_FSL_RMU
   CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
   CONFIG_SYS_FSL_SRIO_LIODN
   CONFIG_SYS_FSL_TBCLK_DIV
   CONFIG_SYS_FSL_USB1_PHY_ENABLE
   CONFIG_SYS_FSL_USB2_PHY_ENABLE
   CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
   CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
4143a23794 Convert CONFIG_SYS_FSL_PCIE_COMPAT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_PCIE_COMPAT

To do this, introduce a choice and option for each of the strings used
and set CONFIG_SYS_FSL_PCIE_COMPAT based on that.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
1de46d91dd Convert CONFIG_SYS_FSL_NUM_CC_PLLS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_NUM_CC_PLLS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
c6eec0182a Convert CONFIG_SYS_FSL_MAX_NUM_OF_SEC to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_MAX_NUM_OF_SEC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
8b549c0b23 Remove CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR et al
This removes the following symbols:
   CONFIG_SYS_FSL_DSPI_BE
   CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
   CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR
   CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET
   CONFIG_SYS_FSL_DSP_DDR_ADDR
   CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
   CONFIG_SYS_FSL_DSP_M3_RAM_ADDR
   CONFIG_SYS_FSL_ERRATUM_A008751
   CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
   CONFIG_SYS_FSL_ESDHC_NUM
   CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
   CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET
   CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET
   CONFIG_SYS_FSL_ISBC_VER
   CONFIG_SYS_FSL_QSPI_LE
   CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR
   CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET
   CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET
   CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR
   CONFIG_SYS_FSL_SRDS_NUM_PLLS
   CONFIG_SYS_FSL_WDOG_BE
   CONFIG_SYS_GP1DIR
   CONFIG_SYS_GP1ODR
   CONFIG_SYS_GP2DIR
   CONFIG_SYS_GP2ODR
   CONFIG_SYS_HALT_BEFOR_RAM_JUMP
   CONFIG_SYS_HMI_BASE
   FSL_QSPI_FLASH_NUM
   FSL_QSPI_FLASH_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
83505a7e9f arc: Move SYS_LITTLE_ENDIAN / SYS_BIG_ENDIAN selection to Kconfig
We can determine which of these we need given CPU_BIG_ENDIAN being
enabled or not, so move that logic to Kconfig from config.mk.

Cc: Alexey Brodkin <alexey.brodkin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Tom Rini
d0748898d8 Convert CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS
   CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS

And we remove the entries from the README for a number of already
converted items.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12 16:10:49 -04:00
Simon Glass
0917f77393 bootstd: Add vbe bootmeth into sandbox
Update sandbox to include the VBE bootmeth. Update a few existing tests to
take account of this change, specifically that the new bootmeth now
appears when scanning.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:17:11 -04:00
Simon Glass
2662b54d70 bootstd: Allow EFI bootmgr to support an invalid bootflow
For most testing we don't want this bootmeth to actually do anything. For
the one test where we do, add a test hook to obtain the correct behaviour.
This will allow us to bind the device always, rather than just doing it
for this test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:17:10 -04:00
Simon Glass
da62e1e861 video: Rename structs and functions to avoid VBE
Rename these to VESA, itself an abbreviation, to avoid a conflict with
Verified Boot for Embedded.

Rename this to avoid referencing VBE.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:14:23 -04:00
Simon Glass
cafe8712e8 video: Renname vbe.h to vesa.h
We want to use VBE to mean Verfiied Boot for Embedded in U-Boot. Rename
the existing VBE (Vesa BIOS extensions) to allow this.

Verified Boot for Embedded is documented doc/develop/vbe.rst

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:14:23 -04:00
Leo Yu-Chi Liang
f4512618ca riscv: ae350: Fix XIP config boot failure
The booting flow is SPL -> OpenSBI -> U-Boot.
The boot hart may change after OpenSBI and may not always be hart0,
so wrap the related branch instruction with M-MODE.

Current DTB setup for XIP is not valid.
There is no chance for CONFIG_SYS_FDT_BASE, the DTB address used
in XIP mode, to be returned. Fix this.

Fixes: 2e8d2f8843 ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards")
Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-08-11 18:46:07 +08:00
Nikita Shubin
a5041e33e4 riscv: cpu: set gp before board_init_f_init_reserve
Restore global pointer before board_init_f_init_reserve call,
as "a0" can be set in harts_early_init call and we end up with
invalid global pointer.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-08-11 18:42:53 +08:00
Simon Glass
4e4bf9449b common: Drop display_options.h from common header
Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-10 13:46:55 -04:00
Tom Rini
3dd4e91632 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- mvebu/turris_omina: Misc fixes and improvements (Pali & Marek)
- mvebu: spl: Always fallback to BootROM boot method (Pali)
- mvebu: Cleanup u-boot,dm-pre-reloc code (Pali)
- gpio: Remove mvgpio driver (Chris)
- SBx81LIFKW/SBx81LIFXCAT disable KIRKWOOD_GPIO (Chris)
- misc: atsha204a: Don't check for error when waking up the device (Pali)
2022-08-09 08:16:14 -04:00
Tom Rini
af7d151b8e - fixup error on efuse commands return
- add documentation on boot flow
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmLyGKIACgkQd9zb2sjI
 SdF3zxAAlmTUYq0shBth7EimdNTxfx2yRBgmNPvaIh1Q1mADUH9vzmtKcqKoz2sT
 dzYIa6NPSrrKp5QjgOzMU4nMFr+uBT5AVSGE8bkCko1hDexUjHt8p2Ai8aizNYkP
 3EQMIgRsOrwNIB+WC7YwqxtKSKAaEfHKyPeEjY9gbJo5AakiE5Z9mO+sOLbQk4pd
 jNC/x8Aj7UzAkQATj2+Nl3f4fw0/es906yQ+yruizIFBY5Sgoqgc1qghaW4+7QBN
 8dsd+l6/HmDtXeg3XmsuNhCZCVDTpilKhBw9ZS3jResgLJP8v24XL/cFdlGGEZNE
 KZUayACh881JmqPExhqKhuCCOig9/e0Zyn5rebKuD8KFvHb3KFRnxgdMyiWE81Io
 L5rJZ+0NMy5s8gNGqQsrOoYu00FXDQK7+pnTtxNmD/o1Gam2F4YDlOFig5PPmLDU
 MVNofk1I3/wecPa83/g949TPDlE0uOBN/zJhNQ6nqR4v7i9gLvGo5QgLAdBbqqo1
 fqpDWJ7ucjYFTKdDHVn4A8Jpr4OVQSt3oKE3SlfN7iLHtDqjploT/KT/U7QAJqbe
 ieE9SeuABPskckm+ECH1Njji2hVtjww6dXJ17hoBWmzGtbR8hvGesQxVHPwQMg5C
 toYJNn4Rhhi1/uM+kZ/7oPO4n3Q1PSmpSZGqkj1ioq2C2kNUjLk=
 =261y
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20220809' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- fixup error on efuse commands return
- add documentation on boot flow
2022-08-09 08:14:09 -04:00
Chris Packham
d1471948f3 ARM: kirkwood: SBx81LIFKW: remove direct access of GPIO registers
Replace code that accessed the GPIO registers directly with code that
makes use of the LED_GPIO driver.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-09 08:58:27 +02:00
Pali Rohár
c8ef618ae1 arm: mvebu: armada-38x-controlcenterdc.dts: Move u-boot, dm-pre-reloc to -u-boot.dtsi
Move U-Boot specific device tree property u-boot,dm-pre-reloc into U-Boot
specific device tree include file armada-38x-controlcenterdc-u-boot.dtsi.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-09 08:58:27 +02:00
Pali Rohár
e49a55af8b arm: mvebu: armada-xp-theadorable.dts: Move u-boot, dm-pre-reloc to -u-boot.dtsi
Move U-Boot specific device tree property u-boot,dm-pre-reloc into U-Boot
specific device tree include file armada-xp-theadorable-u-boot.dtsi.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2022-08-09 08:58:27 +02:00
Pali Rohár
5d4d1212f7 arm: mvebu: Remove redundant u-boot, dm-pre-reloc from all 32-bit Armada SoCs
Replace it by including of mvebu-u-boot.dtsi file. When board does not use
-u-boot.dtsi then mvebu-u-boot.dtsi is included automatically by makefile
scripts/Makefile.lib.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2022-08-09 08:58:27 +02:00
Pali Rohár
8879258ec0 arm: mvebu: Introduce mvebu-u-boot.dtsi for 32-bit Armada SoCs
Set u-boot,dm-pre-reloc for /soc/, /soc/internal-regs/ and &uart0 nodes as
it is required on every 32-bit Armada SoCs. And set also u-boot,dm-pre-reloc
for &spi0 when going to boot from SPI because otherwise SPL SPI drivers do
not load.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2022-08-09 08:58:26 +02:00
Pali Rohár
0e8b74addc arm: mvebu: dts: Build only arch-compatible dts files
64-bit Armada DTS files are not build correctly during compilation of
32-bit Armada boards and vice versa. So fix makefile build system to
compile only those dts files which are compatible for the current build
(64-bit Armada DTS files only for 64-bit builds and 32-bit Armada DTS files
only for 32-bit builds).

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-09 08:58:26 +02:00
Pali Rohár
dfebc1b908 arm: mvebu: spl: Always fallback to BootROM boot method
BootROM boot method should always work so always add it as fallback method
to spl_boot_list. In case U-Boot SPI driver fails it is better to try using
BootROM than hanging as by default only one boot method is specified.

Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-09 08:57:23 +02:00
Kunihiko Hayashi
dd8c3136aa ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins
UniPhier LD20, PXs2 and PXs3 boards have ethernet phy that has RX/TX delays
of RGMII interface using pull-ups on the RXDLY and TXDLY pins.

So should set the phy-mode to "rgmii-id" to show that RX/TX delays are
enabled.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Ramon  Fried <rfried.dev@gmail.com>
2022-08-08 11:37:57 -04:00