Commit graph

67052 commits

Author SHA1 Message Date
Patrick Delaunay
89ddbbb742 stm32mp1: use the command env info -q in env_check
Activate the new option -q in command "env info"
to avoid unnecessary trace during boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28 17:30:53 +02:00
Patrick Delaunay
b0cbafe509 configs:stm32mp1: activate env config in SPL
Activate env config in SPL with CONFIG_SPL_ENV_SUPPORT
and use CONFIG_IS_ENABLED macro to test the activated
CONFIG_$(SPL_)ENV_IS_IN_... in env_get_location.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 17:21:37 +02:00
Patrick Delaunay
76db1681da stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent
Save the environment at the end of the U-Boot partition, the GPT
partition named "ssbl" in SD card or eMMC and avoid requirements
on the "bootfs" file system generated via specific raw tools
(like wic and genimage).

With the previous configuration of the U-Boot environment saved in ext4
file, U-Boot need to create/modify the file uenv.txt in the ext4 file
system; so this EXT4 file system need to be generated without some
functionality, like metadata_csum and dir_index, because they are not
supported by U-Boot.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 17:21:37 +02:00
Patrick Delaunay
a9addcafd1 stm32mp1: board: add support of CONFIG_ENV_IS_IN_MMC
Add support of CONFIG_ENV_IS_IN_MMC in env_get_location, used for
all mmc device (SD card and eMMC).
The 2 configs CONFIG_ENV_IS_IN_MMC and CONFIG_ENV_IS_IN_EXT4 are
incompatible.

Add the weak function mmc_get_env_dev to select the mmc boot instance.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 17:21:37 +02:00
Patrick Delaunay
43fe9d2fda stm32mp1: mmu_set_region_dcache_behaviour
Since commit d877f8fd0f ("arm: provide a function for boards init
code to modify MMU virtual-physical map") the parameter of
mmu_set_region_dcache_behaviour need to be MMU_SECTION_SIZE
aligned.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28 17:21:37 +02:00
Patrick Delaunay
97f7e39def arm: stm32mp: move dbgmcu_init call when DT is ready
As the dbgmcu_init use the function bsec_dbgswenable which is based
on the DM and DT, its call can't be done before the spl is initialized
(driver model, DT and malloc) in board_init_f::spl_early_init().

This function call is moved later in spl_board_init().

Fixes: bd3f60d29c ("arm: stm32mp: protect DBGMCU_IDC access with BSEC")

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28 17:21:37 +02:00
Tom Rini
1db942b67d Prepare v2020.10-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-27 22:46:03 -04:00
Tom Rini
6b7937821d - Handle errors in Meson serial driver
- Enable HDMI, keyboard and ADC for Odroid-C2
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl8e5tQACgkQd9zb2sjI
 SdEzhhAAi3y5bY1Dswyju5WsVSlewP49ev72BsUf01KdB/CcMNH7/8gGcJA0n9JB
 oqTOXKQEFJmmil5+jjcrlTze7F1oylRvZXoI3Pz2fgs80hyXRJGYghAGswDi0z7S
 z5lT36nRJP3KvVS3PJ00TmPXAbWBqR9CDyhlN8wNtJV6+dzleifglwtC4wYcP8yo
 7lrBd8vuEysJHcG5ynotNmf9IdiSyfS0YasnRS2rEsaD0zAJzc9aHl/TQnGZ+yPt
 chXJ1XZagexSbMEF1GNO9t4ic62KzlppfRNOxZmRDXxyrGzn2Hv+rQqv5h+41AyC
 X0DaBUvu80lgvtc81CTjlYq9fRNg1UAUknWJNBoPUkjuoWIBygE1k6D2vzIRfBJu
 haEJoYS3kpvGAn0Ebi+TK/u/aIAdcZVJJ+RZCs6CcwXsqOG35WBicxOMYJfn/PhX
 Tnmp56GKyZFYy1UsgJIm/ZyLLc0p8XHNgeEWzoxjzAF9nuBn4+D1jAxivsPE+gCb
 ICvu9GN+0TaM/+wg112QEXvv87RU/0KNLHiEAHL9kxr6pnqAR9I9HCqXgReW3JhV
 SncedVrjPKrMt9kITAO7JKR7ySXeVLhdMg8GyTM3tC2vtFlOkJo/SZGEDdHZAlL6
 pw9w28ZjnNIaRmJrfAP/8gNw5GHI0q0M3BjeivwzWOuUiaRlXc4=
 =AMiA
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200727' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Handle errors in Meson serial driver
- Enable HDMI, keyboard and ADC for Odroid-C2
2020-07-27 21:40:26 -04:00
Tom Rini
8d1fc6fb89 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a
- lx2-watchdog support
- layerscape: pci-endpoint support, spin table relocation fixes and
  cleanups
- fsl-crypto: RNG support and bug fixes
2020-07-27 15:18:15 -04:00
Tom Rini
fc3414212e travis: Install pyelftools via pip
With the migration to python3 for all of our tests, we need to install
pyelftools via pip now rather than the system tools as they will
otherwise not be present in our virtualenv.

Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2: Switch to pip
2020-07-27 14:42:09 -04:00
Tom Rini
4e05c167a7 binman support for FIT
new UCLASS_SOC
 patman switch 'test' command
 minor fdt fixes
 patman usability improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl8eNVURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebA7Qf/QVH9a07SAXXHjIXN7lVkxtf27hevxS80
 +4imgF52UrQHvdMHxw0m7Kmlt6znP6ThziVRMjCQomYILFiKkLrXJcMtqPoN72oI
 XxYnHShMI0Gjoss0rmP0yDNFkUN6Z09Q6wWoHwQG23Hu1kA6E8uw9gZf6dFwFzSB
 7+ER6Omwl2ziyRI137BQnKXmfkJMXB9+mZPZchZYKJF9HeQPFMXhKO6Rte1Qh7Ei
 oEJBKLghpjFZpu9nNkxXiDzFcm/UromG699U45Vgm11p1gp2m2HtOi+6zAtM2IXP
 IQUkG9zfp8sKonmEdNURP9LzjMazH7As9yGrNMn/G/AWVSg7SLmAKg==
 =V8Rw
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-20jul20-take2a' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

binman support for FIT
new UCLASS_SOC
patman switch 'test' command
minor fdt fixes
patman usability improvements
2020-07-27 11:15:37 -04:00
Anand Moon
95ca2df3fd configs: odroid-c2: update for HDMI output, ADC & USB keyboard
Enable options to permit HDMI output on Odroid-C2 GXBB boards.
Enable VPU Power Domain.
Enable ADC and USB_KERBOARD.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
2020-07-27 16:35:56 +02:00
Neil Armstrong
812196d53e serial: meson: handle RX errors
This checks and handles RX errors on the Amlogic UART controller
after experiencing errors on the Khadas VIM3 & VIM3L when UART AO A
lines are not connected.

When the RX line is not connected, the first byte is erroneous and breaks
the U-Boot autoboot, breaking automatic boot.

This checks and drops any erroneous RX byte on pending and getc callbacks
to avoid returning true to pending when an error byte is in the FIFO.

Fixes: bfcef28ae4 ("arm: add initial support for Amlogic Meson and ODROID-C2")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
2020-07-27 16:35:56 +02:00
Tom Rini
117c7ee283 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sh
- R8A774A1 / Beacon EmbeddedWorks RZG2M Dev Kit support
2020-07-27 09:41:18 -04:00
Tom Rini
2493ce6258 Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-sh
- Convert dc2114x driver to DM.
2020-07-27 09:40:06 -04:00
Tom Rini
3773028fce Merge branch '2020-07-27-misc-env-improvements'
- Assorted environment fixes.
- Enhance environment in MMC and controlled via OF_CONTROL
- Allow for environment in FAT to use the same device we boot from
  rather than be hard-coded.
2020-07-27 09:25:53 -04:00
Kuldeep Singh
636999f21c configs: ls2088a: Restore CONFIG_ENV_ADDR to IFC-NOR
Restore CONFIG_ENV_ADDR value to fix boot hang with IFC-NOR
which is default boot source.

Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Zhao Qiang
5c64d07f76 arm: dts: ls1028a: Add dspi flash device node to qds
Add dspi flash device node to fsl-ls1028a-qds.dtsi

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Zhao Qiang
e5d8fe9c9a configs: lx2160a: Enable Watchdog support
Enable support to compile SBSA driver.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Zhao Qiang
0b7cac71e4 arm64: lx2160a: dts: Add watchdog node
Add watchdog node which is sbsa into lx2160a dtsi

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Zhao Qiang
f27d73e941 Watchdog: introduce ARM SBSA watchdog driver
According to Server Base System Architecture (SBSA) specification,
the SBSA Generic Watchdog has two stage timeouts: the first signal
(WS0) is for alerting the system by interrupt, the second one (WS1) is a
real hardware reset.
More details about the hardware specification of this device:
ARM DEN0029B - Server Base System Architecture (SBSA)

This driver can operate ARM SBSA Generic Watchdog as a single stage
In the single stage mode, when the timeout is reached, your system
will be reset by WS1. The first signal (WS0) is ignored.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Hou Zhiqiang
ed188aa886 pci: layerscape: Add specific config entry for RC and EP mode driver
Add Root Complex and Endpoint mode specific config entries, such that
it's feasible to enable the RC and/or EP mode driver indepently.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
4085e3a46a pci_ep: layerscape: Add the PCIe EP mode support for lx2160a-v2
Add the PCIe EP mode support for lx2160a-v2 platform.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
80b5a662b7 pci: layerscape: Modify the ls_pcie_dump_atu function
Modify the ls_pcie_dump_atu function, make it can print the INBOUND
windows registers.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
83bf32e680 pci_ep: layerscape: Add the SRIOV VFs of PF support
Add the INBOUND configuration for VFs of PF.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
78c56b29fc pci_ep: layerscape: Add Support for ls2085a and ls2080a EP mode
Due to the ls2085a and ls2080a use different way to set the BAR size,
so add the BAR size init code here.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
15ce1fadf7 pci_ep: layerscape: Add the workaround for errata A-009460
The VF_BARn_REG register's Prefetchable and Type bit fields
are overwritten by a write to VF's BAR Mask register.
workaround: Before writing to the VF_BARn_MASK_REG register,
write 0b to the PCIE_MISC_CONTROL_1_OFF register.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
c5174a52c2 pcie_ep: layerscape: Add the multiple function support
Add the multiple function support for Layerscape platform, some PEXs
of Layerscaple platform have more than one PF.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
57fcc13738 armv8: dts: ls1046a: Add the PCIe EP node
Add the PCIe EP node for ls1046a.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
fd00c53fb3 pci_ep: Add the init function
Some EP deivces need to initialize before RC scan it, e.g. NXP
layerscape platform, so add the init function in pci_ep uclass.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Xiaowei Bao
118e58e26e pci: layerscape: Split the EP and RC driver
Split the RC and EP driver, and reimplement the EP driver base on
the EP framework.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Wasim Khan
be2c7d764a arm: dts: lx2160a: Increase configuration window size
lx2160a rev2 requires 4KB space for type0 and 4KB
space for type1 iATU window. Increase configuration
size to 8KB to have sufficient space for type0
and type1 window.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Manish Tomar
11504cf584 configs:ls1046afrwy: Add tfa secure boot defonfig
Add TFA secure boot defconfig and Enables secure boot related
configs in it.

Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:23:57 +05:30
Biwen Li
3bb30b9c76 freescale: ls1043aqds: drop ifdef CONFIG_SYS_I2C
- Drop ifdef CONFIG_SYS_I2C to initialize
  baudrate of i2c

- Drop warning of i2c_early_init_f as follows,
  warning: implicit declaration of function 'i2c_early_init_f'; did you
  mean 'arch_early_init_r'? [-Wimplicit-function-declaration]

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Biwen Li
1b2bdd0605 freescale: ls1043aqds: enable secure system counter
Enable secure system counter in board_early_init_f for udelay()
to fix a bug that always return 0 by timer_read_counter()
when boot from qspi(No TFA)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Biwen Li
51d893cd3d freescale: ls1046aqds: drop ifdef CONFIG_SYS_I2C
- Drop ifdef CONFIG_SYS_I2C to initialize
  baudrate of i2c

- Drop warning of i2c_early_init_f as follows,
  warning: implicit declaration of function 'i2c_early_init_f'; did you
  mean 'arch_early_init_r'? [-Wimplicit-function-declaration]

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Biwen Li
e70e10bc49 freescale: ls1046aqds: enable secure system counter
Enable secure system counter in board_early_init_f for udelay()
to fix a bug that always return 0 by timer_read_counter()
when boot from qspi(No TFA)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Biwen Li
9c31c53564 i2c: mxc: move i2c_early_init_f to common function
Move i2c_early_init_f to common function
to initialize baudrate of i2c

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Michael Walle
ea95f2142e crypto/fsl: add RNG support
Register the random number generator with the rng subsystem in u-boot.
This way it can be used by EFI as well as for the 'rng' command.

Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Michael Walle
b980f9e259 crypto/fsl: instantiate the RNG with prediciton resistance
If it is already instantiated tear it down first and then reinstanciate
it again with prediction resistance.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Michael Walle
c269a970f2 crypto/fsl: don't regenerate secure keys
The secure keys (TDKEK, JDKEK, TDSK) can only be generated once after a
POR. Otherwise the RNG4 will throw an error.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Michael Walle
0dc596127c crypto/fsl: support newer SEC modules
Since Era 10, the version registers changed. Add the version registers
and use them on newer modules.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Michael Walle
277405b86c crypto/fsl: export caam_get_era()
We need the era in other modules, too. For example, to get the RNG
version.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Michael Walle
9b86bf2d14 crypto/fsl: make SEC%u status line consistent
Align the status line with all the other output in U-Boot.

Before the change:
DDR    3.9 GiB (DDR3, 32-bit, CL=11, ECC on)
SEC0: RNG instantiated
WDT:   Started with servicing (60s timeout)

After the change:
DDR    3.9 GiB (DDR3, 32-bit, CL=11, ECC on)
SEC0:  RNG instantiated
WDT:   Started with servicing (60s timeout)

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Heinrich Schuchardt
317fff5909 crypto/fsl: unused value in caam_hash_update()
The value 0 assigned to final is overwritten before ever being used.

Remove the assignment.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Heinrich Schuchardt
32e4b65d96 crypto/fsl: correct printf() statement.
The sequence of arguments should match the format string.
For printing unsigned numbers we should use %u.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Hou Zhiqiang
c5f8943965 arm64: ls1043a: Remove the workaround of erratum A-009929
The workaround has been implemented in PBI phase, so remove
the duplicated implementation from U-Boot.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Kuldeep Singh
10669ed965 configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN value
Previous attempt to increase CONFIG_SYS_MALLOC_LEN was done in commit
c084a8edf4 ("configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN size")
which increased malloc memory to ~1M.

PFE firmware alone requires 3M of dynamic memory allocation and
therefore, increase the config value to a larger value i.e 5M. This size
should be enough as of now to accommodate further memory requirements.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Yangbo Lu
ab84f4f375 configs: lx2160aqds: enable CONFIG_BOARD_EARLY_INIT_R
Enable CONFIG_BOARD_EARLY_INIT_R for SDHC adapter card
identification and configuration.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Yangbo Lu
e1a31034a6 board: fsl: lx2160aqds: identify SDHC adapter during board init
Add support for SDHC adapter identification and configuration
during board init.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30