In u-boot we don't use IRQ. Instead, we poll busy bit in SPI_STATUS.
However these IRQ enable bits may be set in previous boot stage (BootROM).
If we leave these bits not cleared, although u-boot has disabled IRQ and
nothing will happen, the linux kernel may encounter panic during
initializing the spim driver due to IRQ event happens before IRQ handler
is properly setup.
This patch clear IRQ bits to prevent this from happening.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
We don't really need to switch clk rate during operating SPIM controller.
Get clk rate only once at driver probing.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Now we use fdtdec_setup_mem_size_base() to get DRAM base from fdt ram node
and update gd->ram_base. CFG_SYS_SDRAM_BASE is unused and will be removed.
Also, since mt7622 always passes fdt to linux kernel, there's no need to
assign value to gd->bd->bi_boot_params.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Check the uuid_str_to_bin return value, skip the node
if the image-type-id property is wrong format.
Addresses-Coverity-ID: 463145 ("Error handling issues")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
* If an error occurs in efi_disk_add_dev(), don't leak resources.
* If calloc() fails while creating the file system protocol interface,
signal an error.
* Rename efi_simple_file_system() to efi_create_simple_file_system().
* Drop a little helpful debug message.
Fixes: 2a92080d8c ("efi_loader: add file/filesys support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Handle out of memory situation in efi_mem_carve_out().
Fixes: 5d00995c36 ("efi_loader: Implement memory allocation and map")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
On 32bit systems (pages << EFI_PAGE_SHIFT) may lead to an overflow which
does not occur in 64bit arithmetics.
An overflow of (pages << EFI_PAGE_SHIFT) on 64bit systems should be treated
as an error.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
If the hard coded array hash_algo_list[] contains an entry for an
unsupported algorithm, we should not leak resources new_efi and regs.
We should still extend the log with the digests for the supported
algorithms and not write any message.
The same holds true of tcg2_create_digest(): just continue in case
hash_algo_list[] contains an unsupported entry.
Fixes: 163a0d7e2c ("efi_loader: add PE/COFF image measurement")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Handle out of memory situation in efi_add_memory_map_pg().
Fixes: 5d00995c36 ("efi_loader: Implement memory allocation and map")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In test_hii_database_list_package_lists() 'ret' is used for the return code
of EFI API calls and 'result' for the return value of the function. Writing
EFI_ST_FAILURE to ret is superfluous.
Fixes: 4c4fb10da2 ("efi_selftest: add HII database protocols test")
Fixes: ee3c8ba855 ("efi_selftest: fix memory allocation in HII tests")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The efi_parse_pkcs7_header() function returns NULL on error so the check
for IS_ERR() should be changed to a NULL check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
While UPDATE_CAPSULE api is not fully implemented, this interface and
capsule-on-disk feature should behave in the same way, especially in
handling an empty capsule for fwu multibank, for future enhancement.
So move the guid check into efi_capsule_update_firmware().
Fixed: commit a6aafce494 ("efi_loader: use efi_update_capsule_firmware() for capsule on disk")
Reported-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reported-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
It's pretty unlikely that anyone is going to be using EFI authentication
on a 32bit system. However, if you did, the efi_prepare_aligned_image()
function would write 8 bytes of data to the &efi_size variable and it
can only hold 4 bytes so that corrupts memory.
Fixes: 163a0d7e2c ("efi_loader: add PE/COFF image measurement")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The macros are prefixed with DM_FLAG_, not DM_FLAGS_.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Enhance the description of QEMU block devices
* Describe how to attach a virtio-blk device.
* Sort the command lines for MMC to match the other devices.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add Licensing to svg images to clarify the terms.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add more detail to the description of U-Boot boot phases:
* describe which steps are optional
* mentions alternative boot flows
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Three boards use a phandle in a FIT generator and the maintainer is
away. For now, add a hack to allow this.
Signed-off-by: Simon Glass <sjg@chromium.org>
device_probe() called by the 'bootdev info' command
returns 0 or a negative error code.
itoa() cannot print negative numbers.
Convert the error code to a positive number.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
uclass_get_device_by_name() is meant to return 0 or a negative error code.
simple_itoa() cannot handle negative numbers.
This leads to output like:
=> bootdev list -p
Seq Probed Status Uclass Name
--- ------ ------ -------- ------------------
c [ ] 18446744073709551614 spi_flash spi.bin@0.bootdev
Convert the status to a positive number. Now we get
Seq Probed Status Uclass Name
--- ------ ------ -------- ------------------
c [ ] 2 spi_flash spi.bin@0.bootdev
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This provides support for phandles to be copied over from templates. This
is not quite safe, since if the template is instantiated twice (i.e. in
two different nodes), then duplicate phandles will be found. This will
result in an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is not necessary to keep templates around after they have been
processed. They can cause confusion and potentially duplicate phandles.
Remove them.
Use the same means of detecting a template node in _ReadImageDesc so that
the two places are consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
Allow phandles to be copied over from a template. This can potentially
cause duplicate phandles, so detect this and report an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the operations being performed, when debugging is enabled.
Convert a mistaken 'print' in test_copy_subnodes_from_phandles() while we
are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Without the 'dirty' flag properties are not written back to the
devicetree when synced. This means that new properties copied over to a
node are not always written out.
Fix this and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
This file aids debugging when binman fails to get far enough to write out
the final devicetree file. Write it immediate after template processing.
Signed-off-by: Simon Glass <sjg@chromium.org>
When binman is invoked during a build of U-Boot and an external blob is
missing, the user is usually presented with a generic file not found in
input path message.
Invoke binman with --allow-missing so that binman can show relevant
missing blob help messages. Build continue to fail with missing blobs
unless BINMAN_ALLOW_MISSING=1 is used, same as before.
This changes the following error message during a normal build:
binman: Filename 'atf-bl31' not found in input path (...)
to the following:
Image 'itb' is missing external blobs and is non-functional: atf-blob
/binman/itb/fit/images/atf/atf-blob (bl31.bin):
See the documentation for your board. You may need to build ARM Trusted
Firmware and build with BL31=/path/to/bl31.bin
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Show the filename next to the node path in missing blob help messages,
also show a generic missing blob message when there was no help message
for the help tag.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
There is no blank line between last missing blob help message and the
header line for optional blob help messages.
Image 'simple-bin' is missing external blobs and is non-functional: atf-bl31
/binman/simple-bin/fit/images/@atf-SEQ/atf-bl31:
See the documentation for your board. You may need to build ARM Trusted
Firmware and build with BL31=/path/to/bl31.bin
Image 'simple-bin' is missing external blobs but is still functional: tee-os
/binman/simple-bin/fit/images/@tee-SEQ/tee-os:
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Some images are invalid
With this a blank line is inserted to make the text more readable.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Missing optional blobs was not reported for generated entries, e.g.
tee-os on rockchip targets. Implement a CheckOptional to fix this.
After this the following can be shown:
Image 'simple-bin' is missing optional external blobs but is still functional: tee-os
/binman/simple-bin/fit/images/@tee-SEQ/tee-os (tee-os):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Print missing external blobs using error level and missing optional
external blobs using warning level. Also change to only print the header
line in color, red for missing and yellow for optional.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Make it more clear that the missing external blob is optional in the
printed warning message.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Make it a little bit more clear that it is U-Boot that should be built
with TEE=/path/to/tee.bin and not OP-TEE itself.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
+ Fix compilation error for CI when enabling RTL8169 driver
+ Fix compilation error for pci_mmc.c by adding acpi_table header file
+ Support video console and usb keyboard on RISC-V QEMU virt machine
+ Support StarFive JH7110 PCIe driver
+ Enable PCI on Unmatched board
Check if elf tools are available when running DecodeElf(). Also
remove superfuous semicolon at line ending.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Revert part of patch to make binman test pass
Signed-off-by: Simon Glass <sjg@chromium.org>
This brings PCI xHCI support to QEMU RISC-V and uses a usb keyboard
as one of the input devices.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Commit 66ffe57 ("riscv: qemu: detect and boot the kernel passed by QEMU")
added some logic to handle "riscv,kernel-start" in DT and stored the
address to an environment variable kernel_start.
However this "riscv,kernel-start" has never been an upstream DT binding.
The upstream QEMU never generates such a DT either. Presumably U-Boot
development was based on a downstream QEMU fork.
Now we drop all codes in commit 66ffe57, except that BOARD_LATE_INIT
is kept for later use.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
By default the video console only outputs messages after it's ready.
Messages before that won't show on the video console, but U-Boot has
an option to buffer the console messages before it's ready.
Enable this support, and carefully select an address for the buffer.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
At present if both CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are on,
during boot, the printed out stdio devices are incomplete, e.g.:
with "stdout=serial,vidconsole", only "vidconsole" is printed.
For such case, we can print out the stdio device name from the
environment variables.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
As it is only called in common/console.c
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> # qemu-x86_64
The VIDEO dependency is described twice in CONSOLE_MUX.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
The pci_mmc.c driver can generate ACPI info and therefore includes
asm/acpi_table.h. This file does not exist for the RISC-V architecture
and thus code compilation fails when using this driver on RISC-V
Create an empty include file.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
The Unmatched board is typically booted from NVMe which requires PCI.
When dropping to a console PCI is not initialized yet. 'pci enum' has to be
called.
Change the configuration to call pci_init() in board_init_r().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Rick Chen <rick@andestech.com>
