Commit graph

26 commits

Author SHA1 Message Date
Michal Simek
6bd13ee94e arm64: zynqmp: Setup clock-output-names for si570 chips
If there are more instances of si570 clock-output-names property
should be used for differentiation of clock output.
The patch is adding this optional properties for all zynqmp boards with
si570 chip.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 10:30:02 +01:00
Siva Durga Prasad Paladugu
76338e2a0c zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards
This patch adds qspi driver support for all ZynqMP ZCU102
boards.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16 14:03:10 +05:30
Michal Simek
3c1eaec012 arm: zynq: Drop #address-cells and #size-cells from gpio-keys
dtc is showing some warnings and this change was also done in
the Linux kernel as "Input: gpio-keys - clean up device tree binding
example"
with this fragment in commit message
"Drop #address-cells and #size-cells, which are not required by the
gpio-keys binding documentation, as button sub-nodes are not devices."

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-15 08:06:31 +02:00
Michal Simek
704744f81b arm64: zynqmp: Remove pinctrl settings
This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-04-09 12:14:52 +02:00
Michal Simek
bbe5c7252d arm64: zynqmp: Add silabs prefix to u69 for zcu102
Add vendor prefix to si5341.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
147ae1f210 arm64: zynqmp: Remove number from clock-generator node name
There shouldn't be a number appended based on spec.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
95f7d6419d arm64: zynqmp: Remove u-boot commands from dts files
U-Boot commands shouldn't be the part of kernel DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
098505f500 arm64: zynqmp: Use atmel prefix instead of at
This changes was done in mainline and this patch is just following it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
9d928f0418 arm64: zynqmp: Use keycode from input/input.h
Instead of hardcoding numbers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
52af7e3e81 arm64: zynqmp: Remove additional comments from dts files
Remove additional comments which were removed as the part of upstreaming.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
18a952ce7f arm64: zynqmp: Sync up license with mainline kernel
Mainline Linux kernel has adopted SPDX header license in a different
format then was used before. This patch is syncing it up.

Also update years in License text and remove Nathalie's email because it
is no longer valid.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
ba7b6dfae1 arm64: zynqmp: Use i2c-mux instead of i2cswitch instead
Based on review from mainline i2c-mux is standard name for i2c switches.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
a16e578639 arm64: zynqmp: Use maxim prefix for all maxim chips
Use vendor prefix for Maxim chips.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
ee4983f73a arm64: zynqmp: Convert board to use zynqmp-clk driver
Use zynqmp clock driver instead of fixed clocks.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:30:44 +01:00
Michal Simek
858a508f49 arm64: zynqmp: Remove undocumented dma properties
Remove overfetch, ratectrl, include-sg and src-issue dma properties.
Driver is not using them and they are also not documented in the binding
doc.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Kedareswara rao Appana <appanad@xilinx.com>
2017-12-14 20:08:33 +01:00
Michal Simek
d70cb51830 arm64: zynqmp: Enable phys for zcu102
Enable USB3.0 and SATA phy for zcu102 boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:22 +01:00
Shubhrajyoti Datta
fe16aa4b02 arm64: zynqmp: Enable watchdog by default
Enable watchdog in dts for zcu102.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:17 +01:00
Michal Simek
b10255f8e0 arm64: zynqmp: Add note about si5328 interrupt
Add comment about irq present on the board connected to PL.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:16 +01:00
Michal Simek
795ebc0e64 arm64: zynqmp: dt: Add AMS node
The AMS includes an ADC as well as on-chip sensors that can be used to
sample external voltages and monitor on-die operating conditions, such as
temperature and supply voltage levels.

Signed-off-by: Rajnikant Bhojani <rajnikant.bhojani@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:15 +01:00
Michal Simek
ae9775f822 arm64: zynqmp: Add support for zcu102 1.0 rev
1.0 rev is the latest rev. Describe information in eeprom.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:11 +01:00
Michal Simek
9c77cb73c7 arm64: zynqmp: Update device tree for pinmux
Added pin control support in device tree for zynqmp.

Signed-off-by: Chirag Parekh <chirag.parekh@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:10 +01:00
Michal Simek
6507be7800 arm64: zynqmp: Remove local-mac-address from dtsi file
Generic dtsi file can't use the same mac address for all.
U-Boot read mac from eeprom in zcu102 case and for others random mac
address is generated.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:09 +01:00
Bharat Kumar Gogada
f811eca9db arm64: zynqmp: zcu102: Modifying GTR lane-0 to PCIe
- Enabling GTR lane-0 to PCIe
- Enabling PCIe node in device tree

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:09 +01:00
Chirag Parekh
d801ce553e arm64: zynqmp: Update device tree for gpio
Used defines rather than raw values for gpio configurations.

Signed-off-by: Chirag Parekh <chirag.parekh@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:09 +01:00
Michal Simek
23b34d1456 arm64: zynqmp: Use revision in dts file description
Trivial change.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:09 +01:00
Michal Simek
be4634511a arm64: zynqmp: Move dts zcu102 to zcu102-revA
Not using board revision is causing confusion about which board is
supported and tested. Mark dts files exactly with board revision which
was tested. When new board revision arives it can be symlink if SW view
is the same. Also add -revX suffix to compatible string because user space
tools are parsing this string and can change behavior depends of board
revision.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-02 09:11:52 +02:00
Renamed from arch/arm/dts/zynqmp-zcu102.dts (Browse further)