Commit graph

867 commits

Author SHA1 Message Date
Simon Glass
52f2423804 common: Drop bootstage.h from common header
Move this fairly uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Andrew F. Davis
2fcaa84d01 board: ti: README: Update OP-TEE binary name
The OP-TEE binary to use is renamed to v2 as the v1 binary has been
deprecated and is no longer built by default.

Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
2020-03-06 12:53:08 +05:30
Lokesh Vutla
7e3221d6a4 board: ti: k3: Update the sysfw image gen repository
Now k3-image-gen[0] is the official repository for generating sysfw.itb
Update the same in AM65x and J721e README.

[0] https://git.ti.com/cgit/k3-image-gen/k3-image-gen/

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-03 13:08:14 +05:30
Tero Kristo
fa281f64a1 board: ti: j721e: initialize ESM support
Initialize both ESM and ESM_PMIC support if available for the board.
If support is not available for either, a warning is printed out.

ESM signals are only properly routed on PM2 version of the J721E SOM,
so only probe the drivers on this device.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-03 13:08:14 +05:30
Vignesh Raghavendra
29ab5d3fb4 board: ti: Update AM65x and J721e READMEs for OSPI boot
Update AM65x and J721e README files with instructions for flashing OSPI
images.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-03 13:08:13 +05:30
Roger Quadros
4d26dc64d2 board: ti: am57xx-idk: Prevent boot for invalid configuation
On am571x-idk there can be following configurations based on Jumper J51
and LCD panel detected.

1) J51 removed (6port): 6 port Ethernet. Disable LCD panel.
2) J51 placed (LCD) + Panel detected: 4 port Ethernet with appropriate LCD.
3) J51 placed (LCD) + Panel not detected/not supported.

Configuration 3 is considered invalid as we can't use display nor ICSS1
ethernet ports due to hardware muxing. Alert the user to fix the
configuration and prevent boot.

Alternative was to allow boot and limit to 4 port Ethernet with no display
but this involved introduction of another DTB for the kernel and was
considered not worth the hassle.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13 21:39:18 +05:30
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Tom Rini
07add22cab Merge tag '2020-01-20-ti-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
K3 J721E:
* DMA support.
* MMC and ADMA support.
* EEPROM support.
* J721e High Security EVM support.
* USB DT nodes

K3 AM654:
* Fixed boot due to pmic probe error.
* USB support and DT nodes.
* ADMA support

DRA7xx/AM57xx:
* BBAI board support
* Clean up of net platform code under board/ti

AM33/AM43/Davinci:
* Reduce SPL size for omap3 boards.
* SPL DT support for da850-lcdk
* PLL divider fix for AM335x
2020-01-20 14:54:55 -05:00
Andrew F. Davis
28b90a4656 arm: mach-k3: Warn when node to disable is not found
Not finding a node that we try to disable does not always need to be
fatal to boot but should at least print out a warning. Return error
from fdt_disable_node as it did fail to disable the node, but only
warn in the case of disabling the TRNG as this will not prevent boot.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Lokesh Vutla
c7068aba19 board: ti: j721e: Print board name and version during boot
Print the board name and ver along with the DT Model.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Andreas Dannenberg
643eb6ea07 board: ti: j721e: Use EEPROM-based board detection
The TI J721E EVM system on module (SOM), the common processor board, and
the associated daughtercards have on-board I2C-based EEPROMs containing
board config data. Use the board detection infrastructure to do the
following:

1) Parse the J721E SOM EEPROM and populate items like board name, board
   HW and SW revision as well as board serial number into the TI common
   EEPROM data structure residing in SRAM scratch space
2) Check for presence of daughter card(s) by probing associated I2C
   addresses used for on-board EEPROMs containing daughter card-specific
   data. If such a card is found, parse the EEPROM data such as for
   additional Ethernet MAC addresses and populate those into U-Boot
   accordingly
3) Dynamically apply daughter card DTB overlays to the U-Boot (proper)
   DTB during SPL execution
4) Dynamically create an U-Boot ENV variable called name_overlays
   during U-Boot execution containing a list of daugherboard-specific
   DTB overlays based on daughercards found to be used during Kernel
   boot.

This patch adds support for the J721E system on module boards containing
the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS),
the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet
Expansion Board ("J7X-VSC8514-ETH"), the infotainment board
("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial
expansion board ("J7X-GESI-EXP").

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Andreas Dannenberg
499681e15e ti: common: board_detect: Handle EEPROM probe more gracefully
Use dm_i2c_probe() rather than i2c_get_chip() when trying to access
board-detection EEPROM devices. This has the advantage of more gracefully
handling the case when the EEPROM is not present by allowing to exit the
function early rather than failing and outputting an error message on the
I2C transactions that follow.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Caleb Robey
b4309846db board: ti: beagleboneai: add initial support
These are necessities for beaglebone ai boot. There is the addition of
CONFIG_SUPPORT_EMMC_CONFIG to the Kconfig file. This is present upstream
but not in 19.01 yet.

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Caleb Robey <c-robey@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Caleb Robey
703f140830 board: ti: beagleboneai: IODELAY and pinmux
This patch configures the pinmux settings for the BeagleBone AI after
the emmc read has completed.

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Caleb Robey <c-robey@ti.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Caleb Robey
d6eaaae3d3 board: ti: beagleboneai: emmc read changes
BeagleBoard.org BeagleBone AI rev A1 does not include a board
identifier I2C EEPROM due to a design oversight. These boards have
been put into production and are generally available now.

The board identifier information, however, has been included in the
second eMMC linear boot partition (/dev/mmcblk1boot1).

This patch works by:
* First, looking for a board identifier I2C EEPROM and if not found,
* Then seeing if the boot mode matches BeagleBone AI with eMMC in the
  boot chain to make sure we don't enable eMMC pinmuxes on boards
  that don't support it, and
* Finally, initializes the eMMC pins and reading the header.

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Caleb Robey <c-robey@ti.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Grygorii Strashko
0a7886c84d board: ti: am43xx: remove net platform code
The TI AM43xx platform has DM_ETH and OF_CONTROL enabled,
so remove networking platform code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Grygorii Strashko
b102f49e84 board: ti: dra7-evm: remove net platform code
The DRA7 has DM_ETH and OF_CONTROL enabled, so remove networking platform
code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Simon Glass
db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00
Simon Glass
9b4a205f45 common: Move RAM-sizing functions to init.h
These functions relate to memory init so move them into the init
header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:35 -05:00
Simon Glass
807765b067 common: Move device-tree setup functions to fdt_support.h
These functions relate to setting up the device tree for booting the OS.
The fdt_support.h header file supports similar functions, so move these
there.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:27:27 -05:00
Miquel Raynal
88718be300 mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND
Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03 23:04:10 -05:00
Simon Glass
cb3ef6810a common: Move old EEPROM functions into a new header
These functions do not use driver model but are still used. Move them to a
new eeprom.h header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:25 -05:00
Simon Glass
5255932f01 common: Move some board functions out of common.h
A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:21 -05:00
Simon Glass
67c4e9f815 common: Move board_get_usable_ram_top() out of common.h
Move this function into init.h which seems to be designed for this sort
of thing. Also update the header to declare struct global_data so that it
can be included without global_data.h being needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:04 -05:00
Simon Glass
b03e0510d7 common: Move serial functions out of common.h
These functions belong in serial.h so move them over.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:11 -05:00
Adam Ford
7e6668e8f0 Kconfig: ti: Make board detect EEPROM addresses depend BOARD_DETECT
There is an option to enable the board detection for TI platforms.
If this is option is not set, there is no reason to set the EEPROM
bus address or chip address.

This patch makes both EEPROM_BUS_ADDRESS and EEPROM_CHIP_ADDRESS
depend on TI_I2C_BOARD_DETECT.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-11-07 18:39:18 -05:00
Tom Rini
15147dc6a9 Merge branch '2019-10-24-ti-imports'
- Enable DFU on dra7xx boards
- Further Keystone 3 platform improvements
2019-10-25 17:33:28 -04:00
Lokesh Vutla
22b548044b armv7R: K3: j721e: Add support for triggering ddr init from SPL
In SPL, DDR should be made available by the end of board_init_f()
so that apis in board_init_r() can use ddr. Adding support for
triggering DDR initialization from board_init_f().

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25 17:33:21 -04:00
Jean-Jacques Hiblot
f4378ca4fc ARM: keystone: Do not enable the USB power domains at the board level
This breaks linux boot sequence.
Observed on k2e and k2l platforms.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Tero Kristo
752a45a153 board: ti: am335x-ice: Configure the CDCE913 clock synthesizer
AM335x-ICE boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Tero Kristo
9850d4e52f board: ti: am43xx-idk: Configure the CDCE913 clock synthesizer
AM43xx-IDK boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Tero Kristo
e8e683d33b board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer
AM57xx-IDK boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Lokesh Vutla
bd8f138f5a board: am65x: Print board name and version during boot
Print the board name and ver along with the DT Model.
While at it print the ver for all the detected daughter cards.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 13:31:18 -04:00
Lokesh Vutla
3d95fc523e board: j721e: Add README
Add README file explaining the build and boot procedure for J721E evm.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:59 -04:00
Andreas Dannenberg
bc74163a46 board: ti: am65x: Add UART boot procedure in README
am65x ROM support booting over UART. And U-Boot built for am65x EVM
supports UART boot as well. Add the UART boot procedure into the README
also providing a corresponding example command sequence for execution
on a host PC.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-10-11 10:07:33 -04:00
Andrew F. Davis
29c9db4d98 board: ti: am654: Disable TRNG node for HS devices
On HS devices the access to TRNG is restricted on the non-secure
ARM side, disable the node in DT to prevent firewall violations.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-04 12:21:23 -04:00
Simon Glass
f3998fdc4d env: Rename environment.h to env_internal.h
This file contains lots of internal details about the environment. Most
code can include env.h instead, calling the functions there as needed.

Rename this file and add a comment at the top to indicate its internal
nature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fixup apalis-tk1.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11 19:27:31 -04:00
Simon Glass
e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
7b51b576d6 env: Move env_get() to env.h
Move env_get() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
9eef56dbe3 env: Move env_get_ulong() to env.h
Move env_get_ulong() over to the new header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Simon Glass
4bfd1f5d62 env: Move env_init() to env.h
Move env_init() over to the new header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Lokesh Vutla
697a689d76 configs: j721e_evm_a72: Add initial support
Add initial defconfig support for J721e that runs on A72.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[trini: Add MAINTAINERS entry]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-26 22:24:00 -04:00
Lokesh Vutla
f9fe3412c6 configs: j721e_evm_r5: Add initial support
Add initial defconfig support for J721e that runs on R5.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[trini: Add MAINTAINERS file]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-26 22:22:14 -04:00
Suman Anna
d146af5b0e board: ti: j721e: Enable fixing up msmc sram node
Create a ft_board_setup() api that gets called as part of
DT fixup before jumping to kernel. In this ft_board_setup()
call fdt_fixup_msmc_ram that update msmc sram node.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:28 -04:00
Lokesh Vutla
f81850322a board: ti: j721e: Add board support for j721e evm
Add board specific initialization for j721e evm

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26 21:49:27 -04:00
Bartosz Golaszewski
e809285d49 net: davinci_emac: convert to using the driver model
Now that we removed all legacy boards selecting TI_EMAC we can
completely convert the driver code to using the driver model.
This patch also updates all remaining users of davinci_emac.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm & da850-evm
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2019-07-25 13:36:13 -05:00
Andreas Dannenberg
03facc7271 board: ti: am654: Use EEPROM-based board detection
The TI AM654x EVM base board and the associated daughtercards have on-
board I2C-based EEPROMs containing board configuration data. Use the
board detection infrastructure introduced earlier to do the following:

1) Parse the AM654x EVM base board EEPROM and populate items like board
   name and MAC addresses into the TI common EEPROM data structure
   residing in SRAM scratch space
2) Check for presence of daughter card(s) by probing the associated
   presence signals via an I2C-based GPIO expander. Then, if such a
   card is found, parse the data such as additional Ethernet MAC
   addresses from its on-board EEPROM and populate into U-Boot
   accordingly
3) Dynamically create an U-Boot ENV variable called overlay_files
   containing a list of daugherboard-specific DTB overlays based on
   daughercards found.

This patch adds support for the AM654x base board ("AM6-COMPROCEVM")
as well as for the IDK ("AM6-IDKAPPEVM"), OLDI LCD ("OLDI-LCD1EVM")
PCIe/USB3.0 ("SER-PCIEUSBEVM"), 2 Lane PCIe/USB2.0 ("SER-PCIE2LEVM"),
and general purpuse ("AM6-GPAPPEVM") daughtercards.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
183fa08ae5 ti: common: am6: Add support for setting MAC addresses
The AM654x EVM based on the TI K3 family of SoCs has an updated board
detection EEPROM structure that contains a TLV record of dedicated MAC
addresses rather than a range of MAC addresses as it was used on earlier
platforms such as DRA7. Add a basic function that allows us setting up
Ethernet MAC addresses into the U-Boot environment based on the MAC
address record contained in the common TI EEPROM structure.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
361a53308d ti: common: am6: Add support for board description EEPROM
The AM654x EVM based on the TI K3 family of SoCs have an updated board
detection EEPROM structure, now comprising variable-sized TLV-type
records, containing a superset of what is already being provided on
earlier platforms such as DRA7. Add basic support for parsing the new
data structures contained on the base board into the common TI EEPROM
structure while also providing infrastructure that can be used later on
to parse data from additional EEPROMs such as the ones that are used on
daughtercards for this platform.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Faiz Abbas
b5d2e2980b am65x: README: Add eMMC layout and flash instructions
Add instructions for flashing boot images to the eMMC with a
layout of the address where each image needs to be flashed.

Also add instructions to flash filesystem partition in user
partition and boot kernel from the rootfs.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17 11:12:54 -04:00
Andreas Dannenberg
c222e3d927 armV7R: K3: am654: Load SYSFW binary and config from boot media
Use the System Firmware (SYSFW) loader framework to load and start
the SYSFW as part of the AM654 early initialization sequence. While
at it also initialize the WKUP_UART0 pinmux as it is used by SYSFW
to print diagnostic messages.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17 11:12:54 -04:00
Derald D. Woods
e74e9f620a ARM: omap3: evm: Enable DM_USB in defconfig
This addresses the following warning message:

===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

As USB support for older OMAP3 SoC's improves, OMAP3 EVM can be
readily adapted. There is some additional 'gpio-hog' support
needed to fully setup USB in a similar manner to Linux.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2019-07-13 11:11:27 -04:00
Jean-Jacques Hiblot
c5646270d1 board: am335x/mux: configure the pins for 8-bit data transfer on MMC1
This is required for proper operation of the 8-bit data transfers.
This fixes transient errors seen on BeagleBone Black.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-06-05 12:14:02 -04:00
Murali Karicheri
89bf9f1162 ARM: k2g-ice: Add pinmux support for rgmii interface
This add pinmux configuration for rgmii interface so that network
driver can be supported on K2G ICE boards. The pinmux configurations
for this are generated using the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

As this required some BUFFER_CLASS definitions, same is re-used
from the linux defnitions in include/dt-bindings/pinctrl/keystone.h

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:00 -05:00
Murali Karicheri
63200d8457 ARM: k2g-gp-evm: update to rgmii pinmux configuration
This patch updates pinmux configuration for K2G GP EVM based on
data generated by the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:00 -05:00
Brad Griffis
5adcbe0643 board: ti: am43xx: Enable hardware leveling
Remove the RDLVL_MASK, RDLVLGATE_MASK, WRLVL_MASK & enable
PHY_INVERT_CLKOUT to enable Hardware leveling for am437x
as recommended by EMIF Tools app note:

http://www.ti.com/lit/an/sprac70/sprac70.pdf

Signed-off-by: Brad Griffis <bgriffis@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-05-05 08:48:50 -04:00
Vignesh Raghavendra
c14f3c3111 board: ti: am654: select SYS_DISABLE_DCACHE_OPS for arm64 build
AM654 SoC is IO coherent wrt A53 cores, therefore enable
SYS_DISABLE_DCACHE_OPS to avoid cache operations in A53
SPL/U-Boot.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-05-05 08:48:50 -04:00
Paul Barker
bb7b45a356 board: am335x: Drop duplicate pinmux configuration
In commit ad6054f1fe where support for the
Sancloud BeagleBone Enhanced (BBE) was added, new conditional
configuration of either MII pin muxing or RGMII pin muxing is done
depending on the board type. However, the old call to set up MII pin
muxing was not removed.

This may result in misconfiguration of the pin muxing for the BBE or
duplicate configuration for other boards and so we remove this obsolete
call.

Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-03 07:23:17 -04:00
Faiz Abbas
55f8b70fee board: ti: am335x: Remove non DM_ETH code
With DM_ETH enabled in am335x devices, remove all the unused
non-DM code.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:55 -04:00
Faiz Abbas
0229c9330d board: ti: am335x: Add platdata for cpsw in SPL
The SPL image overflows when cpsw dt nodes are added and SPL_OF_CONTROL
is enabled. Use static platdata instead to save space.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:54 -04:00
Lokesh Vutla
5582c03565 board: ti: am65x: Enable fixing up msmc sram node
Create a ft_board_setup() api that gets called as part of
DT fixup before jumping to kernel. In this ft_board_setup()
call fdt_fixup_msmc_ram that update msmc sram node.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12 08:05:51 -04:00
Franklin S Cooper Jr
b3b2a9ea3e arm: dra7: Allow NAND to be enabled on DRA71x EVM.
If SW 8 pins 0 and 1 indicate that NAND should be enabled then
the pins pinmux must be reconfigured for NAND mode.

Therefore, enable NAND by reconfiguring the pinmux.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:49 -04:00
Franklin S Cooper Jr
f072aff944 board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
By default VOUT3 occupies the pins required for NAND. Therefore, create
a seperate entry that can be use to reconfigure these pins to work for
NAND.

On the EVM SWITCH 8 pins 0 and 1 will be used to determine if NAND is
enabled or not. For NAND to be selected pin 0 should be on and pin 1
should be off. Any other combination will assume NAND shouldn't be
enabled.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:49 -04:00
Murali Karicheri
f748ec9d32 ARM: k2g: add a workaround to reset the phy
This patch adds a workaround to reset the phy one time during boot
using GPIO0 pin 10 to make sure, the Phy latches the configuration
from the input pins correctly.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12 08:05:46 -04:00
Murali Karicheri
b15311c90b ARM: k2g-gp-evm: update to rgmii pinmux configuration
This patch updates pinmux configuration for K2G GP EVM based on
data generated by the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12 08:05:46 -04:00
Murali Karicheri
c7206e9789 ARM: k2g-ice: Add pinmux support for rgmii interface
This add pinmux configuration for rgmii interface so that network
driver can be supported on K2G ICE boards. The pinmux configurations
for this are generated using the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

As this required some BUFFER_CLASS definitions, same is re-used
from the linux defnitions in include/dt-bindings/pinctrl/keystone.h

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12 08:05:45 -04:00
Andrew F. Davis
50580a0e70 board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef
When these were moved from mach-omap2 to board files they got placed
inside TI_SECURE_DEVICE ifdef block, they are not secure only, move
them up and out.

Fixes: 413b90777f ("ti: fastboot: Move weak overrides to board files")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-03-22 12:15:22 -04:00
Derald D. Woods
36a75344d7 ARM: omap3: evm: Update DM SPL support
- Switch to using the omap3-u-boot.dtsi file for needed properties
- Enable SPL_OF_CONTROL

This commit is based on the following series:

https://patchwork.ozlabs.org/project/uboot/list/?series=92472
https://patchwork.ozlabs.org/project/uboot/list/?series=92462

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-19 16:58:24 -05:00
Tom Rini
e0cc7df9fd omap3_beagle: Update for DM SPL support
- Switch to using the omap3-u-boot.dtsi file for needed properties.
- Remove a few SPL features to free up more SRAM space.
- Switch CONFIG_SYS_TEXT_BASE to the normal default, we don't need to
  worry about X-Loader at this point anymore.
- A few related updates to SPL options as part of switching to DM SPL.

Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
2019-02-19 16:58:23 -05:00
Vignesh R
cec96b83a0 configs: Remove am43xx_evm_ethboot_defconfig
am43xx_evm_ethboot_defconfig is not being actively used and has not been
moved to DM or DT. Also, ethboot cannot be tested on AM43xx EVM as such
due EVM limitations. Therefore delete it.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18 09:26:14 -05:00
Vignesh R
311e658ef3 configs: Remove unused am335x_evm defconfigs
These defconfigs don't seem be actively used any more, and have not been
moved to adapt DM or DT. Therefore delete them.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18 09:26:14 -05:00
Jean-Jacques Hiblot
347631bcdd board: ti: am43xx: turn on USB clocks
Enable USB clocks in late init stage to support ports under DM_USB.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:09 +01:00
Jean-Jacques Hiblot
c9d5220693 board: ks2_evm: Enable the USB clocks if DM_USB is used
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:09 +01:00
Tom Rini
7ff485c68b Merge branch 'master' of git://git.denx.de/u-boot-i2c
- DM_I2C_COMPAT removal for all ti platforms from Jean-Jacques Hiblot
- Fix in i2c command help output from Chirstoph Muellner.
2018-12-10 07:16:33 -05:00
Tom Rini
48d299a799 Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 and UDC cleanup
2018-12-10 07:15:12 -05:00
Jean-Jacques Hiblot
7eb1f607f1 am57xx: remove non-DM I2C code
am57xx configs uses DM_I2C both in SPL and u-boot.
Remove code for non-DM I2C support.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 07:17:02 +01:00
Jean-Jacques Hiblot
1514244cc1 ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL
DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C
API when DM_I2C is used. The goal is to eventually remove DM_I2C_COMPAT
when all I2C "clients" have been migrated to use the DM API.
This a step in that direction for the TI based platforms.
Build tested with buildman:
buildman -dle am33xx ti omap3 omap4 omap5 davinci keystone

boot tested with:
am335x_evm, am335x_boneblack, am335x_boneblack_vboot (DM version),
am57xx_evm, dra7xx_evm, k2g_evm, am437x_evm

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 07:15:21 +01:00
Andreas Dannenberg
2463f6728e ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT
The EEPROM reading in the board detection code is done through legacy
I2C functions which on platforms using DM_I2C this functionality is
provided via the CONFIG_DM_I2C_COMPAT layer. To allow newer platforms
to use the board detection code without relying on CONFIG_DM_I2C_COMPAT
go ahead and add an I2C handling implementation that directly uses the
I2C DM functionality.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 06:20:17 +01:00
Jean-Jacques Hiblot
532ededd5c board: ti: am57xx: remove USB platform code
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Jean-Jacques Hiblot
6b3b0bf99f board: ti: dra7-evm: remove USB platform code
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Jean-Jacques Hiblot
aec0081093 configs: am57xx_evm: Enable DM_USB and DM_USB_DEV
Enable DM_USB and DM_USB_DEV for AM57xx based boards.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Jean-Jacques Hiblot
b491afa0f3 configs: enable DM_USB and DM_USB_DEV for all DRA7 platforms
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Vignesh R
c3cd5fc870 board; ti: am57xx: turn on USB clocks
Enable USB clocks in late init stage to support ports under DM_USB.

Signed-off-by: Vignesh R <vigneshr@ti.com>

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Jean-Jacques Hiblot
24e261b39c board: ti: dra7xx-evm: turn on USB clocks in late init stage
For USB ports that use the Driver Model, turn on the clocks during the
late init stage.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Keerthy
3b074fb22b board: ti: ks2_evm: Over ride spl_get_load_buffer function
Currently k2 spi boot is broken as the image header
is getting copied to an invalid memory location

CONFIG_SYS_TEXT_BASE - sizeof (struct image_size)
which maps to 0xc000000 - 0x40 = 0xbffffc0 being a reserved
location.

We cannot change the CONFIG_SYS_TEXT_BASE address as the single
stage boots like UART boot will need the address to be 0xc000000
hence override the spl_get_load_buffer to have image_header
address as CONFIG_SYS_TEXT_BASE aka 0xc000000

Signed-off-by: Keerthy <j-keerthy@ti.com>
2018-12-06 23:26:32 -05:00
Lokesh Vutla
6418000311 board: ti: am65x: Update README to add R5 build support
Update the README file to add r5 build support and system
firmware support.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16 16:52:00 -05:00
Lokesh Vutla
6e2a7780d1 configs: am65x_evm_r5: Add initial support
Add initial defconfig support for AM65x
that runs on R5.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2018-11-16 16:51:59 -05:00
Lokesh Vutla
9dba883a45 board: ti: am654: r5: Add initial support for am654
Add initial support for AM654 based EVM running on R5.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16 16:51:59 -05:00
Grygorii Strashko
af0cf2178b drivers: net: keystone_net: drop non dm code
Networking support for all TI K2 boards converted to use DM model and
CONFIG_DM_ETH enabled in all corresponding defconfig files, hence drop
unused non DM K2 networking code.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:42:00 -06:00
Nicholas Faustini
442faf61ab board: ks2: move uinitrd fixup logic inside ft_board_setup_ex
The uinitrd fixup logic should be executed after the FDT /chosen
node has been properly populated by fdt_initrd()

Signed-off-by: Nicholas Faustini <nicholas.faustini@azcomtech.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-10-10 13:32:41 -04:00
Sekhar Nori
20c37fb1bf board: ti: am335x: add support to fixup phy address
On beaglebone black, it can so happen that PHY address
is not latched correctly on reset and board boots with
PHY responding to a different address than that
programmed in device-tree. For example, see this report:

https://groups.google.com/d/msg/beagleboard/9mctrG26Mc8/1FuI_i5KW10J

Workaround this by fixing up device-tree passed to kernel
by using the PHY address detected in hardware.

Beaglebone itself uses only one ethernet port and its DT
currently uses phy_id (obsoleted). But the function has
been written to handle multiple ports and phy_id as well
as phy-handle to make the function more generically useful.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-09-25 21:49:18 -04:00
Lokesh Vutla
f3f094617a configs: am65x_evm_a53: Add initial support
Add initial defconfig support for AM65x that runs on A53.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00
Lokesh Vutla
ea8ad1d9b6 arm64: dts: k3: Add Support for AM654 SoC
Add initial DT support for AM654 EVM that runs on A53.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00
Lokesh Vutla
0911d95263 board: ti: am654: a53: Add initial support for am654
Add initial support for AM654 based EVM running on A53. Enable
4GB of DDR available on the EVM so that kernel DTB file
can be updated accordingly.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[Andreas: Added 4GB ddr support]
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-09-11 08:32:55 -04:00
Koen Kooi
ad6054f1fe Add Beaglebone Enhanced support
The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black,
but with the following differences:

 * Gigabit capable PHY
 * Extra USB hub, optional i2c control
 * lps3331ap barometer connected over i2c
 * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c
 * 1GiB DDR3 RAM
 * RTL8723 Wifi/Bluetooth connected over USB

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-08-03 19:53:01 -04:00
Alexander Graf
7e21fbca26 efi_loader: Rename sections to allow for implicit data
Some times gcc may generate data that is then used within code that may
be part of an efi runtime section. That data could be jump tables,
constants or strings.

In order to make sure we catch these, we need to ensure that gcc emits
them into a section that we can relocate together with all the other
efi runtime bits. This only works if the -ffunction-sections and
-fdata-sections flags are passed and the efi runtime functions are
in a section that starts with ".text".

Up to now we had all efi runtime bits in sections that did not
interfere with the normal section naming scheme, but this forces
us to do so. Hence we need to move the efi_loader text/data/rodata
sections before the global *(.text*) catch-all section.

With this patch in place, we should hopefully have an easier time
to extend the efi runtime functionality in the future.

Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: Fix x86_64 breakage]
2018-07-25 14:57:44 +02:00
Tomi Valkeinen
eae8291913 dra76: fix HDMI HPD pinmux
The pin used for HDMI HPD should be set to GPIO mode on DRA76, similarly
to all the other DRA7 and AM5 SoCs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-13 07:49:14 -04:00
Tomi Valkeinen
32651e4fb8 dra7/am5: remove CEC pin pull-up
HDMI CEC pins are set to pull-up, but CEC requires no pull. Fix this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-13 07:49:13 -04:00