Commit graph

69361 commits

Author SHA1 Message Date
Lukasz Majewski
e98d834713 defconfig: Enable CONFIG_SHOW_BOOT_PROGRESS for imx53's HSC and DDC devices
This option allows using show_boot_progress to visualize the state of
boot process.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-11-01 15:56:55 +01:00
Lukasz Majewski
8a8ec73ebd dts: Provide LED DTS description for HSC and DDC imx53 devices
Those two LEDs are used to indicate U-Boot's boot stage.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-11-01 15:53:51 +01:00
Lukasz Majewski
9c1f71060b arm: Implement show_boot_progress() for imx53's HSC and DDC devices
This patch provides information regarding the boot stage with using LEDs.
On the very beginning of U-Boot execution the GREEN LED is turned on.
When the execution is passed to Linux kernel the GREEN LED is off and
RED one is ON.

Afterwards, when Linux takes over the execution, the "heartbeat" driver
provides indication if the board is still alive.

Please also note that this patch uses {set|clr}bits_le32 macros as turning
ON GREEN LED is performed in a _very_ early stage of U-Boot execution
before DM_GPIOs are initialized.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-11-01 15:53:40 +01:00
Fabio Estevam
fc4e69f63f mx7ulp: clock: Align the PLL_USB frequency
The command 'clocks' shows the following output:

=> clocks
PLL_A7_SPLL         528 MHz
PLL_A7_APLL         529 MHz
PLL_USB           0 MHz

Add some extra spaces so that the PLL_USB information gets aligned with
the previous reported frequencies.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:53:29 +01:00
Fabio Estevam
538723e012 mx7ulp: clock: Remove unuseful information
The command 'clocks' shows the following output:

=> clocks
PLL_A7_SPLL         528 MHz
PLL_A7_APLL         529 MHz
PLL_USB           0 MHz

....

[do_mx7_showclocks] addr = 0x9FFB61F1

The last line is not useful at all, so just remove it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:53:17 +01:00
Tim Harvey
85abf0415d thermal: imx_tmu: fix missing include
commit c05ed00afb dropped linux/delay.h from common header

add linux/delay.h to avoid compile warning here

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2020-11-01 15:53:08 +01:00
Tim Harvey
9d41628863 imx: cpu: terminate line with CR if invalid temp sensor
Ensure we terminate the line with a CR if we get an invalid sensor device
or reading.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:52:58 +01:00
Jorge Ramirez-Ortiz
74a039403c mx6: peripheral clock from oscillator
In order to be able to run the I2C bus at 400Khz, the chip errata[1]
recommends that the peripheral clock runs out of the 24MHz oscillator.

Systems running I2C from OP-TEE before Linux executes - for example to
access a Secure Element [2] providing the cryptographic support - expect
this clock to be configured by the bootloader [3].

[1] IMX6SLCE Rev. 5, 02/2019, ERR007805.
[2] OP-TEE: support for NXP SE05X Plug and Trust (patch on the list).
[3] OP-TEE: check the imx_i2c.c driver (imx6 patch on the list).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:52:47 +01:00
Igor Opaniuk
33d1e52a5d verdin-imx8mm: enable fdt overlays and env importing
Enable CONFIG_CMD_IMPORTENV and CONFIG_OF_LIBFDT_OVERLAY needed
for booting regular Toradex BSP images.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-11-01 15:50:58 +01:00
Peng Fan
9a1b96f1d8 doc: board: Convert i.MX6ULL EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
20337b75a7 doc: board: Convert i.MX6UL 14x14 EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
4fa2635876 doc: board: Convert i.MX6 Sabresd README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
a133a7fa8f doc: board: Convert i.MX6 Sabreauto README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
9de1712d16 doc: board: Convert i.MXRT1050 EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
e66be2d7e6 doc: board: Convert i.MXRT1020 EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
21f747c845 doc: board: Convert i.MX8QXP MEK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
c155f33037 doc: board: Convert i.MX8MQ EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
50ce1bff52 doc: board: Convert i.MX8MM EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
2f9119d579 doc: board: Convert i.MX8MN EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
39d53414ad doc: board: Convert i.MX8MP EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
aa5bbfd961 board: imx: address dd usage in README
When using cygwin64 "dd (coreutils) 8.26 Packaged by Cygwin (8.26-2)",
the last not 512bytes aligned data wat cut off and not burned into SD
card.

Saying the flash.bin size is 1085608 bytes, not 512bytes aligned. It only
burned 1085440 bytes, the leaving 168 bytes were not burnned and cause
boot issue.

So update README dd command to add "conv=notrunc"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Tom Rini
2c31d7e746 Merge tag 'u-boot-rockchip-20201031' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- New PX30 board: Engicam PX30.Core;
- Fix USB HID support for rock960;
- Remove host endianness dependency for rockchip mkimage;
- dts update for rk3288-tinker;
- Enable console MUX for some ROCKPi boards;
- Add config-based ddr selection for px30;
2020-10-30 23:13:13 -04:00
Tom Rini
63d4607e03 of-platdata and dtoc improvements
sandbox SPL tests
 binman support for compressed sections
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl+cXssRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreaYuAgAjG05oxt8a4DXhdzGuXBCbehZv2T7X5Lg
 2+i9uwyg3MkKWp0Spm2J+0flWs+1Bynw335hgNVgq+bh29sajOQz2BtgfDKFY+Aw
 D+D16YBEiEuIbIXLzSsv+ct1va83A3JmlxxoaJ7+ZvoN/5Z3ZvJIZ7F4AzmwlAFT
 5pOFgDEfVM4MYFU4R2wZAaJMnYKQrqR5Tvrxecc6OkhvWIgq7j3elE4xOuh2hL/L
 Bz/KM+4Eq+EUALG+quyEzd+gDKoPY2rNOojxS/lg7PRsN6S8engwE+LkcAkMaNG3
 uDVrTYsA8lCJJwso0in25fUy8sEYWaCSVr/82xfRJMWksPajubem7w==
 =9u1O
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-30oct20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

of-platdata and dtoc improvements
sandbox SPL tests
binman support for compressed sections
2020-10-30 15:24:30 -04:00
Heinrich Schuchardt
096912b5fe log: typo logl_pref in documentation
The name of structure element logl_prev is not matched by the
documentation.

%s/logl_pref/logl_prev/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-30 14:38:04 -04:00
Tom Rini
7820052fde Merge branch '2020-10-30-misc-changes'
- Additional log improvements
- SPI flash environment improvements
2020-10-30 14:17:23 -04:00
Jagan Teki
43ed7a098d doc: rockchip: Document Rockchip miniloader flashing
This would be useful and recommended boot flow for new boards
which has doesn't have the DDR support yet in mainline.

Sometimes it is very useful for debugging mainline DDR support.

Documen it for px30 boot flow.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Jagan Teki
51656ae1d1 rockchip: Add Engicam PX30.Core C.TOUCH 2.0
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Jagan Teki
d432975cec arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose
carrier board with capacitive touch interface.

Genaral features:
- TFT 10.1" industrial, 1280x800 LVDS display
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

SOM's like PX30.Core needs to mount on top of this Carrier board
for creating complete PX30.Core C.TOUCH 2.0 board.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Jagan Teki
39c8b2c72a rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.

PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2 Starter Kit.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Jagan Teki
ce87a88b4d board: engicam: Attach i.MX6 common code
The existing common code for Engicam boards uses i.MX6,
so attach that into i.MX6 Engicam boards so-that adding
new SoC variants of Engicam boards become meaningful.

Add support for it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Jagan Teki
cf1b86a3ae rockchip: px30: Add EVB_PX30 Kconfig help
TARGET_EVB_PX30 can be possible to use other px30 boards.

Add the help text for existing EVB, so-that the new boards
which are resuing this config option can mention their board
help text.

This would help to track which boards are using EVB_PX30 config.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Michael Trimarchi
9946bfd4a0 arm64: dts: rockchip: Add Engicam PX30.Core SOM
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

General features:
- Rockchip PX30
- Up to 2GB DDR4
- eMMC 4 GB expandible
- rest of PX30 features

PX30.Core needs to mount on top of Engicam baseboards for creating
complete platform boards.

Possible baseboards are,
- EDIMM2.2
- C.TOUCH 2.0

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Jagan Teki
282ad86aaa arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

SOM's like PX30.Core needs to mount on top of this Evaluation board
for creating complete PX30.Core EDIMM2.2 Starter Kit.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Guillaume La Roque
82f6508ad7 configs: meson64_android: don't show logo on ROM USB boot
When booting from rom usb, skip the boot logo logic as it's possible
that the partition containing the logo does not exist yet.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2020-10-30 16:20:26 +01:00
Samuel Holland
29ef48efe1 rockchip: mkimage: Remove host endianness dependency
The Rockchip boot ROM expects little-endian values in the image header.
When running mkimage on a big-endian machine, these values need to be
byteswapped before writing or verifying the header.

This change fixes cross-compiling U-Boot SPL for the RK3399 SoC from a
big-endian ppc64 host machine.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:09:56 +08:00
Jagan Teki
d2ebd86d2e rockchip: Enable Console MUX in ROCKPi N8
Enable Console multiplexing in ROCKPi N8 which would is
required to video out the console buffer.

Enable it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:09:23 +08:00
Jagan Teki
9abece3985 video: rockchip: Support 4K resolution for rk3288, HDMI
Like, rk3399 the rk3288 also supports 4K resolution.

So, enable it for rk3288 with HDMI platforms.

Right now, rockchip video drivers are supporting for rk3288,
rk3399 SoC families, so mark the 4K resolution by default
if it's an HDMI video out.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:09:01 +08:00
Jagan Teki
dfec5a4ec0 arm64: dts: rockchip: Add chosen node for ROCK-Pi N8
Add chosen node in -u-boot.dtsi for ROCK-Pi N8 board.

This will help to get serial out messages.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:09:01 +08:00
Jagan Teki
cffcd48109 rockchip: Enable Console MUX in ROCKPi N10
Enable Console multiplexing in ROCKPi N10 which would is
required to video out the console buffer.

Enable it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:09:00 +08:00
Sean Anderson
8ba0f89abe doc: Update logging documentation
This updates logging documentation with some examples of the new commands
added in the previous commits. It also removes some items from the to-do
list which have been implemented.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 11:00:13 -04:00
Sean Anderson
00ebb7feb7 doc: Add log kerneldocs to documentation
The functions in log.h are already mostly documented, so add them to the
generated documentation.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:58:07 -04:00
Sean Anderson
89723b9494 test: Add a test for log filter-*
This exercises a few success and failure modes of the log filter-*
commands. log filter-list is not tested because it's purely informational.
I don't think there's a good way to test it except by testing if the output
of the command exactly matches a sample run.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:56:11 -04:00
Sean Anderson
3e40976aba cmd: log: Add commands to manipulate filters
This adds several commands to add, list, and remove log filters. Due to the
complexity of adding a filter, `log filter-list` uses options instead of
positional arguments.

These commands have been added as subcommands to log by using a dash to
join the subcommand and subsubcommand. This is stylistic, and they could be
converted to proper subsubcommands if it is wished.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:56:11 -04:00
Sean Anderson
fbc33df13c test: Add a test for getopt
A few of these tests were inspired by those in glibc. The syntax for
invoking test_getopt is a bit funky, but it's necessary so that the CPP can
parse the arguments correctly.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-30 10:56:11 -04:00
Sean Anderson
72eda5074b lib: Add getopt
Some commands can get very unweildy if they have too many positional
arguments. Adding options makes them easier to read, remember, and
understand.

This implementation of getopt has been taken from barebox, which has had
option support for quite a while. I have made a few modifications to their
version, such as the removal of opterr in favor of a separate getopt_silent
function. In addition, I have moved all global variables into struct
getopt_context.

The getopt from barebox also re-orders the arguments passed to it so that
non-options are placed last. This allows users to specify options anywhere.
For example, `ls -l foo/ -R` would be re-ordered to `ls -l -R foo/` as
getopt parsed the options. However, this feature conflicts with the const
argv in cmd_tbl->cmd. This was originally added in 54841ab50c ("Make sure
that argv[] argument pointers are not modified."). The reason stated in
that commit is that hush requires argv to stay unmodified. Has this
situation changed? Barebox also uses hush, and does not have this problem.
Perhaps we could use their fix?

I have assigned maintenance of getopt to Simon Glass, as it is currently
only used by the log command. I would also be fine maintaining it.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-30 10:56:11 -04:00
Sean Anderson
018aad8750 cmd: log: Make "log level" print all log levels
This makes the log level command print all valid log levels. The default
log level is annotated. This provides an easy way to see which log levels
are compiled-in.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:56:11 -04:00
Sean Anderson
1c593a105a cmd: log: Add commands to list categories and drivers
This allows users to query which categories and drivers are available on
their system. This allows them to construct filter-add commands without
(e.g.) adjusting the log format to show categories and drivers.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:56:10 -04:00
Sean Anderson
fed9c2fbc9 cmd: log: Split off log level parsing
Move parsing of log level into its own function so it can be re-used. This
also adds support for using log level names instead of just the integer
equivalent.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:27 -04:00
Sean Anderson
f48b5b5634 cmd: log: Use sub-commands for log
This reduces duplicate code, and makes adding new sub-commands easier.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:27 -04:00
Sean Anderson
1227304400 test: Add test for LOGFF_MIN
This tests log filters matching on a minimum level.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00