Commit graph

41 commits

Author SHA1 Message Date
Simon Glass
c3dc39a2f8 arm: Don't include common.h in header files
It is bad practice to include common.h in other header files since it can
bring in any number of superfluous definitions. It implies that some C
files don't include it and thus may be missing CONFIG options that are set
up by that file. The C files should include these themselves.

Update some header files in arch/arm to drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:54:24 -04:00
Martin Kaiser
69f78cf840 watchdog: mx25: use the imx_watchdog driver for mx25
The existing imx_watchdog driver is compatible with mx25 chipsets.
Add a WDOG1_BASE_ADDR define for the base address and enable the driver
in watchdog's Makefile.

To use the driver, a board must define CONFIG_IMX_WATCHDOG and
CONFIG_HW_WATCHDOG.

This fixes an issue when booting an mx25 chip via usb/serial. In this
case, the boot rom will always enable the watchdog. If u-boot is running
in interactive mode and the watchdog is not serviced, the system is
rebooted when the watchdog expires.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-09-04 08:47:23 +02:00
Martin Kaiser
0d38a5fd44 mx25: fix the offset between the USB ports' registers
The USBOH module on imx25 chips contains two USB controllers which are
called USB OTG Controller and USB Host Controller. Each one has its EHCI
root hub. The OTG Controller's EHCI registers start at offset 0, the Host
Controller's registers start at offset 0x400.

We set CONFIG_MXC_USB_PORT=0 to select the OTG Controller and 1 for the
Host Controller. Therefore, IMX_USB_PORT_OFFSET must be 0x400. Using
this setting, the Host Controller starts working on my imx25 board.

Please note that the imx25 reference manual claims that the Host
Controller's registers start at 0x200. This is not correct. The Linux
Kernel uses the correct offset 0x400 in imx25.dtsi.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-07-23 11:05:04 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Michael Trimarchi
77e04034ec imx: mx25: Remove SION bit in all pin-mux that are safe
SION bit should be used in the situation that we need
to read back the value of a pin and should not be set by
default macro.

We get some malfunction as raised by following thread

https://www.spinics.net/lists/linux-usb/msg162574.html

As reported by this application note:
https://www.nxp.com/docs/en/application-note/AN5078.pdf

The software input on (SION) bit is an option to force an input
path to be active regardless of the value driven by the
corresponding module. It is used when the nature direction
of a pin depending on selected alternative function is an output,
but it is needed to read the real logic value on a pin.

The SION bit can be used in:
• Loopback: the module of a selected alternative function drives
the pad and also receives the pad value as an input
• GPIO capture: the module of a selected alternative function
drives the pin and the value is captured by the GPIO

SION bit is not necessary when the pin is configured as a peripheral
apart specific silicon bug. If an application needs to have this
set, this should be done in board file or in dts file

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04 12:00:58 +01:00
Stefano Babic
552a848e4f imx: reorganize IMX code as other SOCs
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/<SOC>.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic <sbabic@denx.de>

CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Akshay Bhat <akshaybhat@timesys.com>
CC: Ken Lin <Ken.Lin@advantech.com.tw>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Heiko Schocher <hs@denx.de>
CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
CC: Christian Gmeiner <christian.gmeiner@gmail.com>
CC: Stefan Roese <sr@denx.de>
CC: Patrick Bruenn <p.bruenn@beckhoff.com>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Nikita Kiryanov <nikita@compulab.co.il>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: "Eric Bénard" <eric@eukrea.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Ye Li <ye.li@nxp.com>
CC: Peng Fan <peng.fan@nxp.com>
CC: Adrian Alonso <adrian.alonso@nxp.com>
CC: Alison Wang <b18965@freescale.com>
CC: Tim Harvey <tharvey@gateworks.com>
CC: Martin Donnelly <martin.donnelly@ge.com>
CC: Marcin Niestroj <m.niestroj@grinn-global.com>
CC: Lukasz Majewski <lukma@denx.de>
CC: Adam Ford <aford173@gmail.com>
CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
CC: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Soeren Moch <smoch@web.de>
CC: Richard Hu <richard.hu@technexion.com>
CC: Wig Cheng <wig.cheng@technexion.com>
CC: Vanessa Maegima <vanessa.maegima@nxp.com>
CC: Max Krummenacher <max.krummenacher@toradex.com>
CC: Stefan Agner <stefan.agner@toradex.com>
CC: Markus Niebel <Markus.Niebel@tq-group.com>
CC: Breno Lima <breno.lima@nxp.com>
CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>
CC: Jaehoon Chung <jh80.chung@samsung.com>
CC: Scott Wood <oss@buserror.net>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Anatolij Gustschin <agust@denx.de>
CC: Simon Glass <sjg@chromium.org>
CC: "Andrew F. Davis" <afd@ti.com>
CC: "Łukasz Majewski" <l.majewski@samsung.com>
CC: Patrice Chotard <patrice.chotard@st.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Stephen Warren <swarren@nvidia.com>
CC: Andre Przywara <andre.przywara@arm.com>
CC: "Álvaro Fernández Rojas" <noltari@gmail.com>
CC: York Sun <york.sun@nxp.com>
CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>
CC: Chen-Yu Tsai <wens@csie.org>
CC: George McCollister <george.mccollister@gmail.com>
CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>
CC: Filip Brozovic <fbrozovic@gmail.com>
CC: Petr Kulhavy <brain@jikos.cz>
CC: Eric Nelson <eric@nelint.com>
CC: Bai Ping <ping.bai@nxp.com>
CC: Anson Huang <Anson.Huang@nxp.com>
CC: Sanchayan Maity <maitysanchayan@gmail.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Patrick Delaunay <patrick.delaunay@st.com>
CC: Gary Bisson <gary.bisson@boundarydevices.com>
CC: Alexander Graf <agraf@suse.de>
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-07-12 10:17:44 +02:00
Benoît Thébaudeau
3e3aab3379 mx25: Add function to set PER clocks
Introduce the imx_set_perclk() function to make it possible to set the
PER clocks.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-05-31 10:14:30 +02:00
Adrian Alonso
fc5ad4778d imx: cpu: move common chip revision id's
Move common chip revision id's to main cpu header file
mx25 generic include cpu header for chip revision

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2015-10-30 15:20:56 +01:00
Heiko Schocher
e6c8b716c7 i2c, mxc: rework i2c base address names for different SoCs
rework and unify i2c address names for different SoCs, which
use the mxc_i2c driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-05-26 14:17:00 +02:00
Thomas Diener
bf0adb861e imx25: Add new hardware registers
Signed-off-by: Thomas Diener <dietho@gmx.de>
2014-05-09 15:10:53 +02:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Benoît Thébaudeau
9e933b43f3 imx: mx25: Remove legacy iomux support
Legacy iomux support is no longer needed now that all boards have been converted
to iomux-v3.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:03 +02:00
Benoît Thébaudeau
ab3a990b4d imx: iomux-v3: Add iomux-mx25.h
Allow usage of the imx-common/iomux-v3.h framework by including pad settings for
the i.MX25. The content of the file is taken from Linux kernel at commit
267dd34, plus the required changes to make it work in U-Boot.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:02 +02:00
Benoît Thébaudeau
0f67e09e9e Add fsl_iim driver
Add a fsl_iim driver common to i.MX and MPC.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-28 11:07:41 +02:00
Benoît Thébaudeau
6adbd30203 imx: Add useful fuse definitions
Define the UID (SoC unique ID) fuses, and the fuses available for the user.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-28 11:07:40 +02:00
Benoît Thébaudeau
8f3ff11c1f imx: Homogenize and fix fuse register definitions
IIM:
 - Homogenize prg_p naming (the reference manuals are not always self-consistent
   for that).
 - Add missing SCSx and bank registers.
 - Fix the number of banks on i.MX53.

OCOTP:
 - Rename iim to ocotp in order to avoid confusion.
 - Rename fuse_data to read_fuse_data, and sticky to sw_sticky, according to the
   reference manual.
 - Merge the existing spinoff gp1 fuse definition on i.MX6.
 - Fix the number of banks on i.MX6.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-04-28 11:07:40 +02:00
Benoît Thébaudeau
34d33b671a ehci-mxc: Define host offsets
Some MXC SoCs like the i.MX35 have hosts located at unusual offsets, so prepare
to the introduction of i.MX35 support by defining the ehci-mxc hosts offsets at
SoC level.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:45 +01:00
Fabio Estevam
e100a3d52e mx25: Place common functions into sys_proto.h
imx-regs.h is meant to contain SoC register definitions.

Common SoC funtions should go to sys_proto.h instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-26 16:28:07 +02:00
Benoît Thébaudeau
5676f598e7 mx25: Clean up imx-regs.h
Clean up i.MX25 imx-regs.h:
 - Update mx31 imx-regs.h filename.
 - Test for __KERNEL_STRICT_NAMES just in case.
 - Define internal RAM size.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-16 12:35:12 +02:00
Benoît Thébaudeau
85d993cef9 mx25: Clean up lowlevel_init
Clean up mx25 lowlevel_init:
 - Add comments.
 - Do not use write32 repeatedly with the same value in order not to increase
   code size.
 - Make register values configurable.
 - Use macro parameters with default values instead of literal constants.
 - Use defined macros instead of duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
Cc: Matthias Weisser <weisserm@arcor.de>
2012-10-15 11:54:14 -07:00
Benoît Thébaudeau
9baefa465d mx25: Clean up clocks API
Use the standard mxc_get_clock() instead of exporting internal functions and
using literal constant values.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:13 -07:00
Benoît Thébaudeau
17c7cf71b4 mx25 clocks: Fix MXC_FEC_CLK
mxc_get_clock(MXC_FEC_CLK) should return the IPG clock, not the AHB clock.

Also, imx_get_fecclk() was correct but reimplemented the calculation of the IPG
clock, so remove the duplicated code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:13 -07:00
Benoît Thébaudeau
c3b5189031 mx25: Define more standard clocks
Define AHB, IPG and CSPI clocks.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:12 -07:00
Eric Benard
8a57fdc640 mx25: add CPU revision 1.2
tested on a MCIMX257CJM4A which now reports :
CPU:   Freescale i.MX25 rev1.2 at 399 MHz

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2012-10-15 11:54:10 -07:00
Benoît Thébaudeau
1b2080f338 mx25: Define default SoC input clock frequencies
Define default SoC input clock frequencies for i.MX25 in order to get rid of
duplicated definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Matthias Weisser <weisserm@arcor.de>
2012-09-06 11:05:09 +02:00
Benoît Thébaudeau
8e99ecd74b mxc: Define architecture identifier
Define ARCH_MXC for i.MX devices. This is useful to identify features or
behaviors common to all i.MX SoCs.

The i.MX28 is omitted because its architecture is a bit different (like imx/mxc
vs. mxs in Linux).

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
2012-09-01 14:58:30 +02:00
Stefano Babic
5fecb36ca0 MX: Set a common gpio.h for all i.MX
Each i.MX has its own gpio.h, defining the same structure.
The internal GPIO controller has the same layout
(at least for the register used by u-boot) and can be shared.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Tested-by: Matt Sealey <matt@genesi-usa.com>
2012-09-01 14:58:27 +02:00
Timo Ketola
8f385e958d i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
types.h must be included in imx-regs.h if one wants to include
imx-regs.h in a board configuration file. That for one's part is
necessary, if one wants to use addresses defined in imx-regs.h.

For example, fsl_esdhc.c needs CONFIG_SYS_FSL_ESDHC_ADDR defined and
a proper thing is to define it with IMX_MMC_SDHCx_BASE in board
configuration file. This patch fixes the build in that case.

Signed-off-by: Timo Ketola <timo@exertus.fi>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:34 +02:00
Timo Ketola
42d25327f5 i.MX25: esdhc: Add mxc_get_clock infrastructure
Defining CONFIG_FSL_ESDHC brings in a call to get_clocks, so let's
implement get_clocks function. This is how it seems to be implemented
elsewhere.

Signed-off-by: Timo Ketola <timo@exertus.fi>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:33 +02:00
Stefano Babic
40f6fffee5 MX: serial_mxc: cleanup removing nasty #ifdef
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2011-12-06 23:59:40 +01:00
Marek Vasut
8edcc6f221 FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:03 +02:00
Fabio Estevam
e6d9b9785c MX25: tx25: Avoid the usage of extern in C file
Avoid the usage of extern in C file as pointed out by checkpatch.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-30 22:01:00 +02:00
Fabio Estevam
986d0d1bc5 ARM: mx25: Print the silicon revison
Print the silicon revison during boot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-30 22:00:59 +02:00
Stefano Babic
a4814a69d3 Makefile : fix generation of cpu related asm-offsets.h
commit 0edf8b5b2f breaks
building on a different directory with the O= parameter.
The patch wil fix this issue, generating always asm-offsets.h before
the other targets.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Wolfgang Denk <wd@denx.de>
2011-09-07 21:41:27 +02:00
Stefano Babic
41eca7416c MX25: make use of GPIO framework for MX25 processor
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Matthias Weisser
39f0023e81 imx: Add support for zmx25 board
zmx25 is a board based on imx25 SoC, 64 Megs of LPDDR, 32 Megs of NOR flash, an
optional NAND flash.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2011-07-14 15:41:24 +02:00
Matthias Weisser
95d185894b imx: Make imx25 compatible to mxc_gpio driver and fix in tx25
Adding support for mxc_gpio driver for imx25 and fix names of registers in tx25
board.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2011-07-14 15:41:24 +02:00
Matthias Weisser
23210d8e1b imx: Add auto generation of asm-offsets.h for imx25
Offsets to registers may be needed in asm code. This patch adds automated
generation of these offsets form C structures.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2011-07-14 15:41:24 +02:00
Liu Hui-R64343
565e39c577 imx: Get fec mac address from fuse
The patch is to support getting FEC MAC address from fuse bank.

Signed-off-by: Jason Liu <r64343@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
2010-11-21 18:24:20 +01:00
Matthias Weisser
81129d07a0 imx25: Fix reset
This patch fixes the reset command on imx25. The watchdog registers are 16
bits in size and not 32. This patch also adds the service register codes as
constants.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2010-10-28 10:32:21 +02:00
Peter Tyser
819833af39 Move architecture-specific includes to arch/$ARCH/include/asm
This helps to clean up the include/ directory so that it only contains
non-architecture-specific headers and also matches Linux's directory
layout which many U-Boot developers are already familiar with.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:12 +02:00