Since U-Boot builds HTML documentation, migrate the contents
of the README file to an rst file which can generate the
proper outputs.
Signed-off-by: Adam Ford <aford173@gmail.com>
Since U-Boot builds HTML documentation, migrate the contents
of the README file to an rst file which can generate the
proper outputs.
Signed-off-by: Adam Ford <aford173@gmail.com>
Update the venice board documentation to show how to install to the
various eMMC hardware partitions available as the same binary firmware
can be placed in either user/boot0/boot1 without build-time config
changes. Note that the boot offsets differ depending on the SoC and the
eMMC hardware partition.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
The original names picked for the DT doesn't match Linux's naming scheme
and it was renamed there a while ago. Rename it in U-Boot to allow
easily syncing dts between the two projects.
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Provide a man-page for the saves command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The current mechanism is unnecessarily complex. Simplify the whole mechanism
such that the entire fitImage is signed, IVT is placed at the end, followed
by CSF, and this entire bundle is also authenticated. This makes the signing
scripting far simpler.
Signed-off-by: Marek Vasut <marex@denx.de>
With some changes to our mapping files in gitdm, re-generate the last
few releases worth of statistics to correctly reflect contributions. We
only go back this far to try and find a balance between highlighting
contributions and still being reviewable.
Signed-off-by: Tom Rini <trini@konsulko.com>
* move FIT documentation to HTML
* man-pages for the bind, bootm, and unbind commands
-----BEGIN PGP SIGNATURE-----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=WVuv
-----END PGP SIGNATURE-----
Merge tag 'doc-2023-07-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2023-07-rc6
* move FIT documentation to HTML
* man-pages for the bind, bootm, and unbind commands
Reformat and rewrite the documentation for this command.
This is a complicated command, so further improvements are welcome.
Signed-off-by: Simon Glass <sjg@chromium.org>
Bring this file into the documentation. For now it is not in the correct
format for a command, but it is valid rST. Futher work will improve this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having this as an addition to the end, move this into the
main body of the spec, rewriting as needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Avoid reference to uImage which is the old format. Drop the historical
language at the top and rewrite a few other sections. Correct the
U-Boot filename which is now in the boot/ directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
Bring these files into the documentation.
Fix 'wtih' and 'it' typos and repeated 'could' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move this document and convert it to rST. Make minimal changes, enough
for it to build successfully.
Future patches will tidy this up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Create a new usage/fit directory which will house information about FIT.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Per GitHub Dependabot:
- Use setuptools 65.5.1 to avoid some DoS issue
- Use requests 2.31.0 to avoid leaking some proxy information
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
EVT_DM_POST_INIT_F only works in U-Boot proper, not SPL.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Polish the wording a bit
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add code to support FWU_MULTI_BANK_UPDATE.
The platform does not have gpt-partition storage for
Banks and MetaData, rather it used SPI-NOR backed
mtd regions for the purpose.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add 'mkfwumdata' tool to generate FWU metadata image for the meta-data
partition to be used in A/B Update imeplementation.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Any requirement of FWU should not require changes to bindings
of other subsystems. For example, for mtd-backed storage we
can do without requiring 'fixed-partitions' children to also
carry 'uuid', a property which is non-standard and not in the
bindings.
There exists no code yet, so we can change the fwu-mtd bindings
to contain all properties within the fwu-mdata node.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Add board code for the R8A77970 V3MSK board.
Add CPLD sysreset driver to the R-Car V3M SK board.
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync configs and board code with V3M Eagle, squash CPLD driver in]
This commit describe the procedure to configure lowest supported
version in the device tree for anti-rollback protection.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Current mkeficapsule tool does not provide firmware
version management. EDK II reference implementation inserts
the FMP Payload Header right before the payload.
It coutains the fw_version and lowest supported version.
This commit adds a new parameters required to generate
the FMP Payload Header for mkeficapsule tool.
'-v' indicates the firmware version.
When mkeficapsule tool is invoked without '-v' option,
FMP Payload Header is not inserted, the behavior is same as
current implementation.
The lowest supported version included in the FMP Payload Header
is not used, the value stored in the device tree is used instead.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
