Commit graph

74323 commits

Author SHA1 Message Date
Wasim Khan
7528f4eb55 board: freescale: LX2162AQDS: Add MAINTAINER
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER
for LX2162AQDS board

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Wasim Khan
a61ca7e21d board: freescale: LX2160AQDS: Add MAINTAINER
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER
for LX2160AQDS board

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Wasim Khan
ad8e44f997 board: freescale: LX2160ARDB: Add MAINTAINER
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER
for LX2160ARDB board

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Camelia Groza
68d62c720c configs: ls1046ardb: enable PHY_FIXED
The optical 10G port is described as fixed-link in the device tree. Enable
the necessary support.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Wasim Khan
4c230d74d1 armv8: lx2160ardb: Add thermal node fixup for revc board
lx2160ardb Rev-C board has i2c node for thermal monitors
connected to different chip offset.
Add device tree fixup to use lx2160ardb dts and apply
thermal node fixups for lx2160ardb Rev-C board.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
[sp:thernal->thermal]
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Camelia Groza
af956271f6 arm: dts: ls1043ardb: configure the RGMII ports with rgmii-id
The RGMII ports on LS1043ARDB platforms require both RX and TX internal
delays to be enabled. The device tree reports only the TX ID because the
RX ID used to be enabled by default.

With the addition of RX ID support for the Realtek 8211F PHY driver in
commit e32e4d0f58 ("net: phy: realtek: add rx delay support for
RTL8211F"), the RX ID is disabled by the driver if not reported explicitly.
This causes the RX to no longer work.

Change the phy-connection-type for the RGMII ports to "rgmii-id" in order
to enable both RX and TX internal delays.

Fixes: be1d758969 ("ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1043ARDB")
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:53:43 +05:30
Stephen Carlson
5cfc15dcfa board: freescale: t2080qds: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
026339a8fa board: freescale: lx2160a: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
17c2a308a5 board: freescale: ls2080a, ls2088a: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
[Squashed ls2088a patch to fix compilation]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
f4cd4a7b8b board: freescale: ls1088a: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
1a0db0104e board: freescale: ls1046a: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:05 +05:30
Stephen Carlson
eba68e2bf7 board: freescale: ls1043aqds: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:04 +05:30
Stephen Carlson
9b5eeb4572 board: freescale: ls1021aqds: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:04 +05:30
Stephen Carlson
15347d2dea board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.

New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20 14:18:04 +05:30
Tom Rini
dd3dfa50d8 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Marvell SheevaPlug: Convert Ethernet and SATA to Driver Model (Tony)
- Zyxel NSA310S NAS: Convert to Driver Model (Tony)
- Turris_omnia: Add `u-boot-env` NOR partition (Marek)
- Turris_omnia: Fixup MTD partitions in Linux' DTB (Marek)
- Espressobin: Enable 'mtd' command and define SPI NOR partitions (Pali)
2021-07-19 08:41:04 -04:00
Tom Rini
83befb4466 Merge tag 'ti-v2021.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Enabled distro boot for all TI platforms.
- Cleanup for AM335x Guardian Board
- PRUSS rproc on AM65 platform.
- Add PMIC support for J7200
- Misc fixes for Nokia RX-51

# Conflicts:
#	arch/arm/mach-omap2/am33xx/Kconfig
2021-07-19 08:29:24 -04:00
Pali Rohár
a675eb14bd arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions
U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable
'mtd' command support for Espressobin board and define partition layout in
U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old
method and 'mtd' command is now preferred variant.

From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is
now defined and enabled in defconfig file. This change is required to fix
compile error:

      CC      arch/arm/lib/asm-offsets.s
    In file included from include/config.h:4,
                     from include/common.h:16,
                     from lib/asm-offsets.c:14:
    include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined
     #define CONFIG_MTD_PARTITIONS  /* required for UBI partition support */

    In file included from ././include/linux/kconfig.h:4,
                     from <command-line>:
    include/generated/autoconf.h:44: note: this is the location of the previous definition
     #define CONFIG_MTD_PARTITIONS 1

After enabling support for mtd command, output from 'mtd list' on
Espressobin board is:

    => mtd list
    List of MTD devices:
    * w25q32dw
      - device: spi-flash@0
      - parent: spi@10600
      - driver: jedec_spi_nor
      - path: /soc/internal-regs/spi@10600/spi-flash@0
      - type: NOR flash
      - block size: 0x1000 bytes
      - min I/O: 0x1 bytes
      - 0x000000000000-0x000000400000 : "w25q32dw"
              - 0x000000000000-0x0000003f0000 : "firmware"
              - 0x0000003f0000-0x000000400000 : "u-boot-env"
    =>

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19 09:05:30 +02:00
Marek Behún
92f36c8e74 arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTB
Fixup SPI NOR partition nodes in Linux' device tree prior booting Linux.

Linux' devicetree does not contain "u-boot-env" partition and we do not
want to add it there because the address is different between stock
U-Boot and current upstream U-Boot.

Instead we add code that recreates partition nodes from scratch
according to how U-Boot sees them (which is defined in U-Boot's device
tree).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19 09:05:30 +02:00
Marek Behún
644b986470 ARM: dts: armada-385-turris-omnia: add u-boot-env NOR partition
Specify a separate partition `u-boot-env` for U-Boot's env settings for
the Turris Omnia board.

Do this only in U-Boot's specific DTS. We do not want to do this in
Linux' official DTS, because Omnia's stock U-Boot stores env at a
different address, and there are still boards with stock U-Boot.

In a subsequent patch will add board code that fixes Linux's DTB before
booting Linux.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19 09:05:30 +02:00
Tony Dinh
6e73bb7e40 arm: kirkwood: Marvell Sheevaplug: Use Ethernet PHY name and address from device tree
- In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
with Ethernet PHY name from device tree. Also, Ethernet PHY address
is available so read it from device tree.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19 08:44:18 +02:00
Tony Dinh
ba7174fc53 arm: kirkwood: Marvell Sheevaplug: Add DM SATA and remove IDE configs
Enable DM SATA, removed IDE driver, and add SATA MV driver.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19 08:44:18 +02:00
Tony Dinh
dca2c733b2 arm: kirkwood: Marvell Sheevaplug: Add DM Ethernet and DM SATA configs
Add DM_ETH, SATA_MV and associated configs to sheevaplug_defconfig

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19 08:44:18 +02:00
Tony Dinh
5c151bfee4 arm: kirkwood: NSA310S: Use Ethernet PHY name from device tree
In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
with Ethernet PHY name from device tree. Also, Ethernet PHY address
is available so read it from device tree.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19 08:44:15 +02:00
Tony Dinh
3a2f298335 arm: kirkwood: NSA310S: Add DM SATA configs
Enable DM SATA, removed IDE driver, and add SATA MV driver.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19 08:44:11 +02:00
Tony Dinh
2fd89bd3b1 arm: kirkwood: NSA310S: Add DM USB, DM Ethernet, and DM SATA configs
Convert to Driver Model.

- Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig
- Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig
- Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig
- Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR
to nsa310s_defconfig

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19 08:44:06 +02:00
Tony Dinh
ee48f53722 arm: kirkwood: NSA310S: Add device tree DTS for Zyxel NSA310S board
Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to
convert to Driver Model.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19 08:44:02 +02:00
Tom Rini
abf0061eab Merge branch '2021-07-18-finalize-migrations'
- With the deadline for DM_USB (host controller support), DM_VIDEO,
  DM_SPI_FLASH and DM_PCI now at 2 years past the release where their
  migration deadline was given, finish removing platforms and enforcing
  the switch.
2021-07-18 23:07:36 -04:00
Tom Rini
b7b5cbe279 Makefile: Remove DM_VIDEO and DM_SPI_FLASH checks
As we have now completed the DM_VIDEO and DM_SPI_FLASH migrations we can
remove the checks.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:06:33 -04:00
Tom Rini
ac9fa5705c pci: Require DM_PCI
As the migration deadline has passed, require that DM_PCI be used.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:06:08 -04:00
Tom Rini
be5c0608b8 usb: Enforce DM_USB migration for USB_HOST devices.
As the deadline for migration to DM_USB, when using a USB host
controller has now gone two years past the deadline, enforce migration.
This is done by:

- Ensuring that all host controller options (other than the very legacy
  old MUSB ones) now select USB_HOST.  USB_HOST now enforces DM_USB and
  OF_CONTROL.
  - Remove other parts of Kconfig logic that had platforms pick DM_USB.
  - To keep Kconfig happy, have some select statements test for USB_HOST
    as well.
- Re-order some Kconfig entries and menus so that we can cleanly pick
  host or gadget roles.  For the various HCD options that have platform
  glue options, group them together and update dependencies in some
  cases.
- As SPL_DM_USB is not required, on platforms that had not yet enabled
  it, disable it.

Cc: Marek Vasut <marex@denx.de>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Samuel Holland <samuel@sholland.org>
Cc: FUKAUMI Naoki <naobsd@gmail.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:05:31 -04:00
Tom Rini
e8d3eaadcd treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USB
As the logic here is only used when we have a USB host controller, test
on CONFIG_USB_HOST rather than CONFIG_USB in general.  This lets us move
towards using CONFIG_USB only as a menu symbol to say that we have some
form of USB, and then USB_HOST or USB_GADGET depending on the role that
USB plays within the build.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:05:31 -04:00
Tom Rini
3fa03bcf8c tegra: Test on CONFIG_CMD_USB being enabled for distro bootcmd
Reuse the common logic to allow for BOOT_TARGET_DEVICES to list USB as a
possibility if we're building for a platform that will have USB but not
if we don't, so that we don't hit the link-time check for trying to have
USB boot on a non-USB system.

Acked-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:05:31 -04:00
Tom Rini
67b77d72f4 ge_bx50v3: Remove unused USB related defines
These USB defines do not change the build as there is no USB support
enabled currently.

Cc: Ian Ray <ian.ray@ge.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-18 21:03:57 -04:00
Tom Rini
96b97fa311 m68k: Remove M52277EVB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is also the last in family remove the related
support as well.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
a732f621bc m68k: Remove M54451EVB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is also the last in family remove the related
support as well.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
5e770daa3c m68k: Remove M54418TWR board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
563cae7c46 m68k: Remove M54455EVB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
011e86a8bf vinco: Enable DM_USB and DM_SPI_FLASH support
As this platform already enables CONFIG_DM and CONFIG_OF_CONTROL,
migrating to DM_USB and DM_SPI_FLASH is just a matter of enabling the
correct options.

Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
u-boot@lists.denx.de (open list)
Reported-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:03:57 -04:00
Tom Rini
df761ba425 - mips: gardena-smart-gateway: adjust config to new production values
- mips: malta: convert to PCI DM and ETH DM
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAmD0dbMACgkQKPlOlyTy
 XBgxOBAAulyJqvTHDWIk6l6d8qseSBgWuwPf0mE/YDKowGrfLbiCWEJICvg3qeJZ
 tkIuT5/y2DCjRpKQ2i1GtgTtG2+7AzEMR9FuSys1NMXXyNiLrPdoXKvR/2sDv7F4
 V0UPhhaOPNTHObnKea9+x8Kb+fYhT8RrfPvnm55OTeTXpk/jKWUfH+LhQ6ij2lRp
 NXnbo5byDyxznn9c5VTT3urMmsXLQdoqiHGfa52+1Zn0TH5AvAHTTQNx4V1bzsKx
 z5vG4a5D9Ul52drxhWLgIwSEdwHc08oXA0G7dKnCT8fdZrONqH2QJ2CWQ1AhPQou
 Vb+J5fS69N5vJcNRXIHBTQr9R092HT1onV6xCgoy+W7hP0jJuFd8lf0Qs+TKwbxC
 t0SdRwXO3AUirejwBtJVfUCtdTQFFtulPIvJLCgLnqIwCzer7rVcLdlpWBaBen3M
 VEKFe9mrjYBdVnZiatxMffcplAkIzXturhXSlhE3vqJo3eJ/QPMJL4fnX9MWH8cc
 kKFGF1qILI+34mTR2lw+QOJzNehHr+Jre6QzuXUhCCW8APi6CTQeOR/7KqOfTDvH
 jZFO9tuOA3W5yQ0sLWmeD1SB+nGI+oQSebe1/ly9aPcYYNlp0w8drKcyUpMaqJ+U
 IhwEHszQesZCMkkhccBhtl9pgnfKoD0m0RAdlcFbD67VyPFQKxA=
 =wDfz
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2021-07-18' of https://source.denx.de/u-boot/custodians/u-boot-mips

- mips: gardena-smart-gateway: adjust config to new production values
- mips: malta: convert to PCI DM and ETH DM
2021-07-18 18:31:16 -04:00
Daniel Schwierzeck
526ceb4387 MIPS: malta: enable PCI driver model
Enable DM_PCI and DM_ETH on MIPS Malta.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18 20:37:39 +02:00
Daniel Schwierzeck
7b29249790 MIPS: malta: add support for PCI driver model
As almost all peripherals are connected via PCI dependent on the
used core card, PCI setup is always required. Thus run pci_init()
including PCI scanning and probing and core card specific setups
in board_early_init_r().

Also prepare support for dynamically managing the status of the
different PCI DT nodes dependent on used core card via option
CONFIG_OF_BOARD_FIXUP. Before this feature can be enabled,
the call order of the fix_fdt() init hook in board_init_f
needs to be changed. Otherwise rw_fdt_blob points to a read-only
NOR flash address. Thus this options needs to stay disabled
until the board_init_f problem could be solved. This breaks
running the default U-Boot image on real HW using the FPGA core
card but Qemu emulation still works. Currently Qemu is more
important as MIPS CI tests depend on Malta and the deadline
for PCI DM conversion will be enforced soon.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18 20:37:39 +02:00
Daniel Schwierzeck
73be5636f4 MIPS: malta: add DT bindings for PCI host controller
Add DT binding for GT64120 and MSC01 PCI controllers. Only
GT64120 is enabled by default to support Qemu. The MSC01 node
will be dynamically enabled by Malta board code dependent
on the plugged core card.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18 20:37:39 +02:00
Daniel Schwierzeck
8bee3a38a0 pci: msc01: convert to driver model
This driver is currently only used on MIPS Malta boards.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18 20:37:39 +02:00
Daniel Schwierzeck
201d49d94a pci: gt64120: convert to driver model
This driver is currently only used on MIPS Malta boards.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18 20:37:39 +02:00
Daniel Schwierzeck
a45343a0aa dm: pci: add option to map virtual system memory base address
On MIPS the DRAM start address respectively CONFIG_SYS_SDRAM_BASE
is still used as a virtual, CPU-mapped address instead of being used
as physical address. Converting all MIPS boards and generic MIPS code
to fix that is not trivial. Due to the approaching deadline for
PCI DM conversion, this workaround is required for MIPS boards with
PCI support until the CONFIG_SYS_SDRAM_BASE issue could be solved.

Add a compile-time option to let the PCI uclass core optionally map
the DRAM address to a physical address when adding the PCI region
of type PCI_REGION_SYS_MEMORY.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18 20:37:39 +02:00
Reto Schneider
fe5ac45946 mips: mt7688: gardena-smart-gateway: Adjust to production values
This commit updates the default config with the values that will
be used soon on the MediaTek MT7688 based GARDENA smart gateway.

CONFIG_SPL_SYS_MALLOC_F_LEN had to be increased due to the more
demanding new configuration.

Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18 20:36:03 +02:00
Tom Rini
6943da4ee7 Pull request for efi-2021-10-rc1-2
* Correct device path nodes for GUID partitions
 * Embed keys to check update capsules instead of providing then in DTB
 * Increase event log buffer size for measured boot.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmD0MkYACgkQxIHbvCwF
 GsTVuRAAh3JvhR6h/8jK0HG4+ZkAPw6LlXDuoFKwh6wBWOQOgxSA3eqlW+jM9YbM
 PKeO47z9A0TIFfMUCwiwiixhzHjZI6jo39J04Mq9B+1JCe6ITdUNunvjqGvIM9Uc
 0eaxhdq8Jb3pFjIw/8HckPoXqM7grKe2SKeKYfuxL0xwCWNaAi4fKxnlBUrFiYSn
 hHZLvvhtDSMZMXeK03GJojVUl62z9AxUglmZ7qxIDWcoffPpctW46khoXFSKh8b5
 Bvm5lJ4+jWsx2czWC2HZ04NWGANDyP4XHgOVt4OhqdWR695IRLpWkBoyoQkBS+Q7
 sD7r0iaHml8nausNzwSi6//1h8sWYR13GTHGnivkp1b0/ujczENlBDvG/coyNa+T
 WngkXQkBjkvYS6+l9bCGWUs6NUhmpDguhy0tfRcqBuiJr4BsWy4RvrQE7yV2/ZLK
 1C0TPb4ZcBJjRfC5aHmau5zjjslUWMeyZRllOh/OTKKE6PAE7JQWJn/gcZS6+3us
 70pEnMN/3DO9k7eOxSsXXH9Ioe6ZtHyCK2TtvlQ2Wa1IEOvmK2hVrw6zPJbUvFxS
 ZFWNmqXcu1OT5tFIy5Axne8lktivVrKUt4NqhhTJWbOTrejWb32vgg7O9+Q0Zk/0
 1TkD989qmzSlNK3Uz2oC72h8lq37TL0gqPzJGQAGVAJFg788+jI=
 =sV/0
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-10-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2021-10-rc1-2

* Correct device path nodes for GUID partitions
* Embed keys to check update capsules instead of providing then in DTB
* Increase event log buffer size for measured boot.
2021-07-18 11:03:02 -04:00
Ilias Apalodimas
316ab801c0 doc: Update CapsuleUpdate READMEs
Since we removed embeddingg the capsule key into a .dtb and fixed
authenticated capsule updates for all boards, move the relevant
documentation in the efi file and update it accordingly

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18 14:43:56 +02:00
Ilias Apalodimas
f86caab058 mkeficapsule: Remove dtb related options
commit 322c813f4b ("mkeficapsule: Add support for embedding public key in a dtb")
added a bunch of options enabling the addition of the capsule public key
in a dtb.  Since now we embedded the key in U-Boot's .rodata we don't this
this functionality anymore

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18 14:43:56 +02:00
Ilias Apalodimas
ddf67daac3 efi_capsule: Move signature from DTB to .rodata
The capsule signature is now part of our DTB.  This is problematic when a
user is allowed to change/fixup that DTB from U-Boots command line since he
can overwrite the signature as well.
So Instead of adding the key on the DTB, embed it in the u-boot binary it
self as part of it's .rodata.  This assumes that the U-Boot binary we load
is authenticated by a previous boot stage loader.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18 14:43:56 +02:00