Jon Loeliger
709d3073e7
Convert to mac-address in ethernet nodes.
2006-08-09 09:00:30 -05:00
Haiying Wang
71748af833
Correct the irq value of DUART2
2006-07-31 09:43:08 -05:00
Haiying Wang
9cb3e8816a
Change the space size of PEX IO in README
2006-07-31 09:42:49 -05:00
Haiying Wang
239db37c94
Move get_board_sys_clk to board directory
2006-07-31 09:27:57 -05:00
John Traill
492900b985
Fix 8641HPCN pollution
2006-07-28 09:59:57 -05:00
John Traill
515ab8a62e
Fix 8641HPCN timebase
2006-07-28 09:54:10 -05:00
Zhang Wei
c86360b830
Fixed OF device tree of mpc86xxhpcn board.
...
The changes works in with kernel irq mapping rework.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2006-07-27 15:32:02 -05:00
Haiying Wang
bea3f28d28
Add support for reading and writing mac addresses to or from ID EEPROM.
...
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.
U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).
If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
Jin Zhengxiong
fcb28e7634
Fixed initrd issue by define big RAM
...
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
2006-07-13 10:35:10 -05:00
Jason Jin
e6cd2a1785
We made a u-boot patch to fix the hang up issue
...
when booting filesystem from ramdisk.
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
2006-07-07 10:02:15 -05:00
Jin Zhengxiong
da012ab661
Change Id to symbolic name for RTL8139
...
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2006-06-28 08:43:56 -05:00
Jin Zhengxiong-R64188
bc09cf3c2b
Fix RTL8139 in big endian
...
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
signed-off-by: Wei Zhang <wei.zhang@freescale.com>
2006-06-27 10:29:32 -05:00
Jin Zhengxiong-R64188
fcfb9a5794
Fix Tsec bug when no link
...
When tftp a non-exist file from the tftp server, u-boot will check
the link of all eth port. The original file will return wrong link
state on the no link ports.
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
2006-06-27 10:00:13 -05:00
Jin Zhengxiong-R64188
bd22c2b975
Fix bug for io_bar size during pci scan
...
During the pci scan process, Some devices return bar_reponse with the
highest bytes 0, such as the pci bridge in uli1575 return bar_response
with 0xffffff, So the bar_size should be manually set under 64K.
Signed-off-by: Jason Jin <jason.jin@freescale.com>
2006-06-27 09:18:22 -05:00
Jin Zhengxiong-R64188
fa7db9c377
Enable PCIE1 for MPC8641HPCN board
...
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2006-06-27 09:17:59 -05:00
Jon Loeliger
684623ce92
Fix bug in 8641hpcn reset command with no args.
...
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2006-06-22 08:51:46 -05:00
Zhang Wei
8be429a5dd
Reworked IRQ mapping in OF-tree.
2006-06-22 08:31:21 -05:00
Jon Loeliger
0e4c2a17ca
Do not enable address translation on secondary CPUs.
...
Do not set up BATs on secondary CPUs. Let Linux do the nasty.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-06-15 21:45:26 -05:00
Jon Loeliger
8ecc971618
Fix a get_board_sys_clk() use-before-def warning.
...
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-06-07 10:53:55 -05:00
Jon Loeliger
d9bf4858fc
Allow DTC path to be passed in.
...
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-06-07 10:52:49 -05:00
Haiying Wang
c83ae9ea6d
Modify the IRQ of DUART2
2006-06-07 08:48:08 -05:00
Jon Loeliger
c934f655f9
Review cleanups.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 14:01:32 -05:00
Jon Loeliger
cb5965fb95
White space cleanup.
...
Some 80-column cleanups.
Convert printf() to puts() where possible.
Use #include "spd_sdram.h" as needed.
Enhanced reset command usage message a bit.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 12:44:44 -05:00
Jon Loeliger
3d5c5be547
Removed unneeded local_bus_init() from 8641HPCN board.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 11:39:34 -05:00
Jon Loeliger
4d3d729c16
Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 11:24:28 -05:00
Jon Loeliger
b2a941de06
Remove dead debug code.
...
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-05-31 10:07:28 -05:00
Jon Loeliger
126aa70f10
Move mpc86xx PIXIS code to board directory
...
First cut at moving the PIXIS platform code out of
the 86xx cpu directory and into board/mpc8641hpcn
where it belongs.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 09:49:33 -05:00
Haiying Wang
38cee12dcf
Improve "reset" command's interaction with watchdog.
...
"reset altbank" will reset another bank WITHOUT watch dog timer enabled
"reset altbank wd" will reset another bank WITH watch dog enabled
"diswd" will disable watch dog after u-boot boots up successfully
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-30 09:10:32 -05:00
Haiying Wang
70205e5a6d
Fix two SDRAM setup bugs.
...
Fix ECC setup bug.
Enable 1T/2T based on number of DIMMs present.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-30 08:51:19 -05:00
Haiying Wang
d11fec5015
Add first draft of the MPC8641HPCN doc/README.
...
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-05-26 10:24:48 -05:00
Haiying Wang
ed45d6c930
Added pci@8000 block.
...
Updated ethernet interrupt mappings (moved up 48).
Cleaned up a few comments.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-05-26 10:13:04 -05:00
Haiying Wang
3033ebb20f
Allow args on reset command.
...
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-05-26 10:01:16 -05:00
Jon Loeliger
14e37081ff
Change arbitration to round-robin for SMP linux.
2006-05-19 13:54:02 -05:00
Jon Loeliger
9a655876e5
Enable dual DDR controllers and interleaving.
2006-05-19 13:54:02 -05:00
Jon Loeliger
586d1d5abd
Update 86xx address map and LAWBARs.
2006-05-19 13:54:02 -05:00
Jon Loeliger
cccce5d058
Remove L2 Cache invalidate polling.
2006-05-19 13:54:02 -05:00
Jon Loeliger
f35ec68fb0
Enable 2nd CPU and I2C.
2006-05-19 13:54:02 -05:00
Jon Loeliger
bf690dcb51
Update interrupt mapping.
2006-05-15 07:26:56 -05:00
Haiying Wang
6cfea33477
Remove unneeded INIT_RAM_LOCK cache twiddling.
...
Correctly tracks r29 as global data pointer now.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-10 09:38:06 -05:00
Jon Loeliger
d4dd317b58
Remove unnecessary flash.c file.
2006-05-10 09:33:07 -05:00
Jon Loeliger
18b6c8cd8a
Get MPC8641HPCN flash images working.
...
Enable the CFI driver.
Remove bogus LAWBAR7 cruft.
Use correct TEXT_BASE, Fixup load script.
Enable SPD EEPROM during DDR setup.
Use generic RFC 1918 IP addresses by default.
2006-05-09 08:23:49 -05:00
Jon Loeliger
5c9efb36a6
Cleanup whitespaces and style issues.
...
Removed //-style comments.
Use 80-column lines.
Remove trailing whitespace.
Remove dead code and debug cruft.
2006-04-27 10:15:16 -05:00
Jon Loeliger
a2320a6bf8
Revert bad PCI prefetch limit change.
2006-04-27 08:22:39 -05:00
Jon Loeliger
debb7354d1
Initial support for MPC8641 HPCN board.
2006-04-26 17:58:56 -05:00
Detlev Zundel
76544f80e4
Include BC3450 board in configurations in README
2006-04-24 17:52:01 +02:00
dzu@denx.de
6ca24c64a5
Add support for BC3450 board
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-21 18:30:47 +02:00
dzu@denx.de
56a4a63c10
Added missing nand.c for NC650 board
...
Signed-off-by: dzu@denx.de <dzu@eddie.localdomain>
2006-04-19 15:27:11 +02:00
dzu@denx.de
a367d42640
Update for NC650 board. Add NC650 based CP850 configuration.
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-19 11:52:46 +02:00
Wolfgang Denk
8419c01304
MPC5200: enable snooping of DMA transactions on XLB even if no PCI
...
is configured; othrwise DMA accesses aren't cache coherent which
causes for example USB to fail.
2006-04-18 11:05:03 +02:00
Wolfgang Denk
cf48eb9abd
Some code cleanup
2006-04-16 10:51:58 +02:00