Commit graph

61143 commits

Author SHA1 Message Date
Igor Opaniuk
6e735248e3 imx: gpmi: add defines for hw randominizer
Extend GPMI Integrated ECC Control Register Description, include
additional defines for enabling randomizer function and providing
proper randomizer type.

For additional details check i.MX7 APR, section
9.6.6.3 GPMI Integrated ECC Control Register Description
(GPMI_ECCCTRLn)

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03 21:49:10 +01:00
Tom Rini
b947dd8fc6 tbs2910: Disable Plan9/RTEMS bootm support
We have once again reached a point where this board does not build in
some cases with supported toolchains due to reaching a size constraint.
To regain some space, disable support for Plan 9 / RTEMS images with the
bootm command.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2019-11-03 21:18:00 +01:00
Oliver Graute
eef72440db imx: support i.MX8QM ROM 7720 a1 board
Add i.MX8QM ROM 7720a1 board support

Boot log as below:
U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Advantech iMX8QM Qseven series
Board: ROM-7720-A1 4GB
Build: SCFW 65afe5f6
Boot:  SD2
DRAM:  4 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1
, eth-1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03 21:18:00 +01:00
Peng Fan
387c44904d arm: dts: imx8mm: sync dts from Linux Kernel
Sync dts for i.MX8MM from Linux Kernel 5.4.0-rc1

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 21:18:00 +01:00
Hannes Schmelzer
c04ac5bd40 board/BuR/brppt2: initial commit
This commit adds support for the brppt2 board. The board is based on the
i.mx6 dual-lite SoC.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03 21:17:55 +01:00
Anatolij Gustschin
910b2fca97 imx8: output SECO-FW and ATF commit IDs
Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617)
but drop imx-mkimage commit ID reading since we now use in tree mkimage.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Ye Li
264977d1c2 mach-imx: Adding new argument for SIP call interface
Need to pass total 5 arguments for SIP HAB call on i.MX8MQ,
so update the interface to add new argument.

Signed-off-by: Ye Li <ye.li@nxp.com>
[agust: fixed imx8m-power-domain build]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
6dcc6cebcf imx8qxp: mek: add secure boot script
Add secure boot script, use ahab to verify image

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
b06ff8f50d imx8qm: mek: add secure boot script
Add secure boot script, use ahab to verify image

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
7e2db74231 imx8: Add AHAB secure boot support
Add function and new command "auth_cntr" for secure boot support.
When booting with life cycle set to OEM closed, we need to use
this function to authenticate the OS container and load kernel & FDT
from OS container to their destination.

Also add image authentication call when loading container images.

Users can set CONFIG_AHAB_BOOT=y to enable the feature. It is not
set at default.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
8c61eba03d imx8mm: evk: enable bd71837 pmic
Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for
DRAM and linux suspend voltage requirement.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
1a9971035d imx8m: evk: spl: probe clk in spl early stage
We are going to add i2c pmic support before dram could be used.
So we need enable clk driver earlier, so use spl_early_init
and move clock controller probe eariler to board_init_f.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
672fc540cd power: pmic: Kconfig: add CONFIG_SPL_DM_PMIC_BD71837
Add CONFIG_SPL_DM_PMIC_BD71837 to make this driver could be
used in SPL stage

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
e0f724f718 pmic: bd71837: drop DEBUG macro
Drop DEBUG macro definition which is used for debug purpose.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
698c439815 dt-bindings: import usb pd
Import usb pd bindings from Linux 5.4.0-rc1.
This file will be included by imx8mm-evk.dts.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
9d86dbd9cf imx: spl: implement spl_boot_mode for i.MX7/8/8M
It will be easy to separate SD/EMMC when booting in SPL stage, then
no need to bother which device is BOOT_DEVICE_MMC1/2.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
2dfecdd1ed imx: imx8mq: add init_nand_clk
Add init_nand_clk to enable gpmi nand clock. Since i.MX8MQ not use CCF,
so we still use legacy mode to configure the clock.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
eeca15a50a imx8m: clock: improve irq response latency
Improve the IRQ response latency by setting GIC root clock source to
sys_pll2_200m from osc.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
9e09445549 imx8m: imx8mq: get chip rev for B1 revision
The i.MX8MQ B1 uses OCOTP_HW_OCOTP_READ_FUSE_DATA register for chip id.
It returns a magic number 0xff0055aa. update get_cpu_rev to support it,
and enable ocotp clock to access ocotp.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
cde421cfc8 video: mxsfb: set gd->fb_base
Set gd->fb_base so it can be shown with bdinfo command.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
b1be79b417 opos6uldev: migrate to DM_VIDEO
Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
b72dd938ec imx6ul: opos6ul: migrate to DM_ETH
Migrate to DM_ETH and remove code that is no longer necessary.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03 17:04:16 +01:00
Patrick Wildt
05737f3585 imx: update i.MX8MQ device trees
This updates the i.MX8MQ device trees and, necessarily, also the
i.MX8MQ clock bindings.  These are taken verbatim from from the
Linux kernel version v5.4-rc2, which three small changes which
were already part of the previous device tree:

 * Keep the PSCI reserved memory range
 * Keep the alias for ethernet, so that the MAC address can be set
 * Keep the modified #include for the IOMUXC pins

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
c4cb27e59f mccmon6: defconfig: nor: Enable usage of *_TINY_* drivers in SPL
After this change the SPL size has been reduced from 38K to 34K.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
e4417ed03e ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTB
This commit enabled support for fitImage on mccmon6 when we
switch to DT/DTS (including falcon mode).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
a4a16c9181 spl: nor: Provide falcon boot support for NOR memories
This commit adds falcon boot support (by also copying args necessary for
booting) to the SPL NOR memory driver.

After this change it is possible to use the falcon boot in the same way
as on NAND memories. The necessary configs (i.e. CONFIG_CMD_SPL_NOR_OFS)
are now defined in Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
e0fe3dcbd0 ARM: imx: Decouple mccmon6's SPL and u-boot proper code
The mccmon6 has been used a "mixed" approach between SPL and
U-Boot proper sources.

This commit decoupes SPL and u-boot proper, which allows clear
distinction between those two code bases and facilitates
conversion to DM/DTS on this particular board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
8e64181a99 ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot proper
This commit converts mccmon6's u-boot proper (in a single commit to avoid
build breaks) to use solely DM/DTS.

The DTS description of the mccmon6 has been ported from Linux kernel
(v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
f6a4df3846 imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 board
The TPC70 is equipped with DS1307 RTC device. Add code to enable support
for it.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Claudius Heine
5c47bf7195 ARM: imx6: DHCOM i.MX6 PDK: spl: Add eMMC initialization to SPL code
In order for 'bmode emmc' to work, the eMMC needs to be initialized in the
SPL. This change initializes the eMMC as BOOT_DEVICE_MMC1 (index=0).

Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-03 17:04:16 +01:00
Claudius Heine
cd71c7597a ARM: imx6: DHCOM i.MX6 PDK: defconfig: Enable MMC support of SPL
Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-03 17:04:16 +01:00
Claudius Heine
5331fadbfc ARM: imx6: DHCOM i.MX6 PDK: fix board_boot_modes emmc entry
The board_boot_modes contained the wrong values for the emmc entry.

The eMMC here is connected over a 8-bit bus.

This change allows to use the 'bmode emmc' command to boot from emmc.

Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-03 17:04:16 +01:00
Robert Hancock
f2929d11a6 watchdog: imx: Use immediate reset bits for expire_now
The expire_now function was previously setting the watchdog timeout to
minimum and waiting for the watchdog to expire. However, this watchdog
also has bits to trigger immediate reset. Use those instead, like the
Linux imx2_wdt driver does.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
2019-11-03 17:04:16 +01:00
Robert Hancock
ceea0c145d watchdog: imx: Add DT ext-reset handling
The Linux imx2_wdt driver uses a fsl,ext-reset-output boolean in the
device tree to specify whether the board design should use the external
reset instead of the internal reset. Use this boolean to determine which
mode to use rather than using external reset unconditionally.

For the legacy non-DM mode, the external reset is always used in order
to maintain the previous behavior.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
2019-11-03 17:04:16 +01:00
Igor Opaniuk
6b4339d312 ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Add u-boot,dm-pre-reloc properties for uart pinmux configuration
nodes, which enables UART as early as possible (before relocation).

Without this we miss almost the half of output (U-boot version,
CPU defails, Reset cause, DRAM details etc.).

Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm")
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-11-03 17:04:16 +01:00
Igor Opaniuk
7d6ca12313 ARM: dts: imx6ull-colibri: change hierarchy of DTS files
Introduce imx6ull-colibri-u-boot.dtsi for u-boot specific properties to
keep original imx6ull-colibri.dts in sync with Linux.

Move all contents of imx6ull-colibri.dts to imx6ull-colibri.dtsi +
additionally fix checkpatch warnings.

Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-11-03 17:04:16 +01:00
Marek Vasut
b4a2cdc13e arm: mxs: Increase VDDD voltage to match specification
According to IMX28CEC rev. 4, 10/2018, Table 15. Recommended Operating
Conditions, page 16, the VDDD should be set to 1.55V when the CPU is
operating at 454MHz. This is the case in U-Boot, hence increase the
VDDD voltage. This fixes instability when performing TFTP transfers.
Increase the brownout threshold to 1.4V. The documentation recommends
1.45V setting for the brownout, however, this triggers failure during
power block init, so keep the brownout slightly lower.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-03 17:04:16 +01:00
Claudius Heine
dde31a14ec ARM: imx: Use IMX6_SRC_GPR10_BMODE instead of magic number
Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-03 17:04:16 +01:00
Claudius Heine
e01c8cfe57 ARM: imx: Fix bmode detection from grp10
imx6_is_bmode_from_gpr9 always returns false, because
IMX6_SRC_GPR10_BMODE is 1<<28 and gets casted to u8 on return.

This moves the function body into imx6_src_get_boot_mode, since that is the
only one using it and it is on the same abstraction level (accessing
registers directly).

Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-03 17:04:16 +01:00
Manivannan Sadhasivam
7f8a6a66af arm: dts: Add devicetree support for iMXQXP AI_ML board
Add devicetree support for iMXQXP AI_ML board from Einfochips.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Parthiban Nallathambi
6aa874911e i.MX6: nand: extend nandbcb command for imx6UL(L)
Firmware Configuration Block(FCB) for imx6ul(l) needs to be
BCH encoded.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Acked-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
3201e5b444 imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5
After the following commit:
commit 772b55723b ("imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC
boot on falcon mode")
it is possible to set the CONFIG_SPL_FORCE_MMC_BOOT flag, which allows
using MMC device as boot device regardless of the device used by Boot ROM
(FBL) as the first boot medium.

Display5 board needs this flag set to allow falcon boot from eMMC device.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Fabio Estevam
fa64df4602 mx6: clock: Introduce disable_ipu_clock()
Introduce disable_ipu_clock(). This is done in preparation for
configuring the NoC registers on i.MX6QP in SPL.

Afer the NoC registers are set the IPU clocks can be disabled.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 13:16:51 +01:00
Fabio Estevam
1be51fed56 mx6: clock: Use setbits_le32()
The code can be made simpler by using setbits_le32(), so switch
to it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 13:16:41 +01:00
Tom Rini
5d6f05352b azure: Update the script to prepend PATH not override PATH
Similar to 90d3d78a1c ("gitlab-ci: Prepend to PATH rather than replace
it") we need to prepend the PATH with our additional binaries and not
replace the value fully as doing so breaks virtualenv.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-01 13:59:14 -04:00
Tom Rini
24b77393a5 Pull request for UEFI sub-system for efi-2020-01-rc2
Provide a better user interface for setting UEFI variables.
 
 Bug fixes:
 - ext4 file system not discovered on UEFI block device
 - 'make tests' build error on 32bit systems
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl25wUcACgkQxIHbvCwF
 GsQ16w/+IibWYFw2t6AdI8DLWOvlHR/PVAOrbF9cBi1vZPr4drEH6m1ymRWAKjRt
 E4u8siBiIs5yhD7laL09JK4p/veTnoHCVrCdli9iPhIJUFGKz9uuXh4ruZgRnGIn
 +j0ra0tkTRHeGX4bMtTpMVySQqIuLQ+2ZrMMnfKfnTTlLmhv436xUyBZ/CFl7k4J
 7sFj/FfjRCYpe7nfHTqUGidJtJG1cc+hw26c1YrfiKB6piVdH43myOB5sPDW24g3
 OPptJyUFqbQjjV6Eq0EOVJt103rVtXpQc0e4Oa/mDDkmrQZ1pUhXi3zhxmzMRDQu
 k+9gX0IoSNJcW+e7DrcQsx5SmOnlvoC4euCypzhWEWvES89ftAHIitEAz9oTs6Gc
 etwXFomvH797ZOoBztrja9XsfnLFHBQHaAiExqEVVFi/1nhDsYdj+xEDHjDU+cZx
 E3UcrRNXcfA2+oaXpNBguzAOrMPX8UbrR1kkaMDTuJfA32Pe7RLz3aMfXyx1rAOU
 t7GWSROOYtoNf5IU/Jha1F8231WRPJnWm1LQdzNLaGSmbG/H7vFgW4dpdxEyLn4m
 C0Goj0GzmBIQxRL+38sCOKLVxPEpGoU/GzonC9bU0O+UyN57rAiwn9ZbTa6ZvJqG
 /2tPoKiutJRueUH3IDWViMhyW/w0h0tj0BUiV5lAQ9X9vW4E1YQ=
 =f0m8
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-01-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-01-rc2

Provide a better user interface for setting UEFI variables.

Bug fixes:
- ext4 file system not discovered on UEFI block device
- 'make tests' build error on 32bit systems
2019-11-01 09:37:02 -04:00
Tom Rini
bafed10542 - fix splash build breakage with newer llvm-7
-----BEGIN PGP SIGNATURE-----
 
 iGsEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXbrgbA4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXJOPAJwKJBfhxSmDy+KqxTVIgheBHG5SVwCWIhsdRPAL
 Pru2lp1u3cWByYt9Qw==
 =2Vp3
 -----END PGP SIGNATURE-----

Merge tag 'video-for-2020.01-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

 - fix splash build breakage with newer llvm-7
2019-11-01 09:35:37 -04:00
Tom Rini
bb1bb4bb5d Fix for patman with email addresses containing commas
Bootstage improvements for TPL, SPL
 Various sandbox and dm improvements and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl24zDoRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZRiwf+Mf7oG//zjiZcHaPP6KOFb1CjwqLSuiaI
 eCYB6GEZXuSpc8MjAw+baAfIw8MMFuaCfPsUQ5dDo391neK0sW9kkEsdcXnQBpB3
 GdJYcewLN1UuJZovriGobIisGc0GQHh8gmRcVGWSKoEt+gAQauRtVYBIUPuS3JG+
 ihZgYmVgICa+3tqavIbP2oZdXLuLAxR65mfiQHtiJwdCN3OOzyls2v0T0slQX9GV
 ln6EvTk8OMIudBmkB7YiTmJF7AB+3PH/uBaiYyTKO9gtjLhnmCFvG5HxJTRFOKvU
 F4oVWZJDEcqfZvYgWg8i5vgokMP41nzLfBr7j5ifUX1f3xwCHy/Tpw==
 =S4XI
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-29oct19' of git://git.denx.de/u-boot-dm

- Fix for patman with email addresses containing commas
- Bootstage improvements for TPL, SPL
- Various sandbox and dm improvements and fixes
2019-11-01 09:34:35 -04:00
Tom Rini
82679624f9 Merge branch '2019-10-30-master-imports'
- Migrate test.py to use python3 and current pytest.
- NVMe bugfixes
- Assorted other fixes
- Android AVB updates.
2019-11-01 09:23:21 -04:00
Tom Rini
5d80a1a93d azure: Update for python3 and current pytest
Similar to the rework for GitLab-CI and Travis-CI, rework the Azure
Pipeline to use python3 and requirements.txt to install the necessary
modules.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-31 10:45:03 -04:00