Commit graph

41050 commits

Author SHA1 Message Date
Simon Glass
b50113f373 buildman: Add an option to just create the config
Normally buildman does a full build of a board. This includes creating the
u-boot.cfg file which contains all the configuration options. Buildman uses
this file with the -K option, to show differences in effective configuration
for each commit.

Doing a full build of U-Boot just to create the u-boot.cfg file is wasteful.
Add a -D option which causes buildman to only create the configuration. This
is enough to support use of -K and can be done much more quickly (typically
5-10 times faster).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Simon Glass
1bd876301b Makefile: Add a target to create the .cfg files
A common requirement when converting CONFIG options to Kconfig is to check
that the effective configuration has not changed due to the conversion. Add
a target which creates this configuration (in the form of u-boot.cfg) but
does not build U-Boot. This speeds up the checking.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Tom Rini
0317724e6c sandboxfs: Fix resource leak
Now that we free resources in sandbox_fs_ls Coverity is letting us know
that in some cases we might leak.  So in case of error we should still
let os_dirent_free free anything that was allocated.

Fixes: 86167089b7 ("sandbox/fs: Free memory allocated by os_dirent_ls")
Reported-by: Coverity (CID: 153450)
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
George McCollister
a982b6f514 tpm: tpm_tis_lpc: Add support for AT97SC3204
The Atmel AT97SC3204 is also TIS compliant.
Modify the tpm_tis_lpc driver to check for the vid/did used by the
Atmel AT97SC3204 and report an appropriate description.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Stefan Brüns
0427b9c525 cmd/tpm_test: Fix misleading code indentation
GCC 6.2 reasonably complains about the current code:

../cmd/tpm_test.c: In function ‘do_tpmtest’:
../cmd/tpm_test.c:540:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
   for (i = 0; i < argc; i++)
   ^~~
../cmd/tpm_test.c:542:4: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’
    printf("\n------\n");
    ^~~~~~

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Updated to remove C99 variable decl:
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
York Sun
86d8000f10 script: remove CONFIG_SYS_CCSRBAR_DEFAULT from white list
Now all mpc85xx and mpc86xx have converted to use SYS_CCSRBAR_DEFAULT
in Kconfig. Drop this macro for LSCH2 and remove from white list.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-02 08:52:34 -08:00
York Sun
4a1e6810a2 powerpc: mpc86xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option
Move default value definitions to Kconfig SYS_CCSRBAR_DEFAULT.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-02 08:52:34 -08:00
York Sun
830fc1bfe7 powerpc: mpc85xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option
Move default value definitions to to Kconfig SYS_CCSRBAR_DEFAULT.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-02 08:52:34 -08:00
York Sun
22a1b99a1d powerpc: cyrus: Separate P5020/P5040 config options
Instead of using EXTRA options in defconfig, use two targets
in Kconfig to select correct SoC.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-02 08:52:34 -08:00
Michal Simek
861fe6503e cmd: scsi: Make private functions static
Two functions should be static because they are not exported to any
other file.
Warnings were reported by sparse C=1.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:32 +01:00
Michal Simek
0b3a58eeee scsi: Separate SCSI private block description initialization
When blk_create_device() is called some parameters in blk_desc are
automatically filled. Separate SCSI private initialization and SCSI full
block device initialization not to rewrite already prepared data.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:27 +01:00
Michal Simek
c002e39ae6 scsi: Change scsi_scan() to be able to return value
With DM_SCSI this function will return more than one return value to
cover errors.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:26 +01:00
Michal Simek
545a284711 scsi: Make private functions static
Several functions should be static because they are not exported to any
other file.
Warnings were reported by sparse C=1.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:26 +01:00
Michal Simek
182ec15307 scsi: Remove completely unused functions
These functions are not called for any location.
This patch removes them scsi_trim_trail(), scsi_get_disk_count()
and scsi_setup_read6().

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:26 +01:00
Michal Simek
cdb93b276b scsi: Simplify scsi_read/scsi_write()
There is no reason to directly point to static allocated array
when we have proper block_dev pointer available via parameter
in !CONFIG_BLK. For CONFIG_BLK this is read directly from uclass
platdata.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:22 +01:00
Michal Simek
bccfd9e967 scsi: Move pccb buffer initalization directly to scsi_detect_dev
pccb is pointer to temporary buffer which is used only for sending
command. Make it local as is done in scsi_read/scsi_write.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:21 +01:00
Michal Simek
4dbee176f8 scsi: Take lun from device block description
Prepare LUN(Logical unit number) directly in block description structure
and reuse it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:21 +01:00
Michal Simek
570712f4bc scsi: Extract device detection algorithm
The patch enables running detection algorithm on block device
description structure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:16 +01:00
Michal Simek
92ca476c3a scsi: Extract block device initialization
Extract block device initialization to specific function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:36:10 +01:00
Michal Simek
15a2acdf85 common: miiphyutil: Work and report phy address in hex in mdio cmd
It is confusing that mdio commands work and report phy id as
decimal value when mii is working with hex values.

For example:
ZynqMP> mdio list
gem:
21 - TI DP83867 <--> ethernet@ff0e0000
ZynqMP> mdio read ethernet@ff0e0000 0
Reading from bus gem
PHY at address 21:
0 - 0x1140
ZynqMP> mii dump 21 0
Incorrect PHY address. Range should be 0-31
...
ZynqMP> mii dump 15
0.     (1140)                 -- PHY control register --
  (8000:0000) 0.15    =     0    reset

U-Boot normally takes hex values that's why this patch is changing mdio
command to handle hex instead of changing mii command to handle decimal
values.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-02 14:36:02 +01:00
Siva Durga Prasad Paladugu
20ca67900f ARM: zynq: Enable SD1 and qspi for picozed board
Enable SD1 and qspi for picozed board.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02 14:36:01 +01:00
Masahiro Yamada
e3e18bea64 ARM: zynq(mp): remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines
ARCH_ZYNQ(MP) selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT
is not used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02 14:36:01 +01:00
Michal Simek
2661081c30 ARM64: zynqmp: List secondary software boot modes
Using alternative bootmode field to support automatic secondary boot
modes. It is purely software setting where SW modes are using free
bootmode combinations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02 14:35:57 +01:00
Michal Simek
fde6cacde2 ARM64: zynqmp: Use DTS name for different psu_init_gpl* files in SPL
CONFIG_SYS_CONFIG_NAME is not proper config option for different low
level init files because different board revisions requires different
psu_init_gpl* files.

Also at the end of moving drivers to DM all board specific configuration
files should be removed.

The same changes was done for Zynq.
"ARM: zynq: Simplify zynq configuration"
(sha1: ad5b580126)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02 14:35:50 +01:00
Michal Simek
e367240a54 ARM64: zynqmp: Force certain bootmode for SPL
ZynqMP provides an option to overwrite bootmode setting which
can change SPL behavior.
For example: boot SPL via JTAG and then SPL loads images from SD.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02 14:34:37 +01:00
Tom Rini
9ae0e14350 Merge git://www.denx.de/git/u-boot-marvell 2016-12-01 09:24:02 -05:00
Chris Packham
2611c05e84 tools/kwbimage: add DEBUG option
Offset 0x1 in the generated kwb image file is a set of flags, bit 0
enables debug output from the BootROM firmware.  Allow a DEBUG option in
the kwb configuration to request debug output from the BootROM firmware.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-01 09:10:49 +01:00
Chris Packham
4bdb547978 tools/kwbimage: add BAUDRATE option
Offset 0x18 in some Marvell datasheets this field is redacted as
"reserved". This offset is actually a set of options and bits 2:0 allow
the selection of the UART baudrate.

Allow a BAUDRATE option to set the UART baudrate for any messages coming
from the BootROM firmware.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-01 09:10:43 +01:00
Chris Packham
a53d97ae85 arm: mvebu: move SYS_MVEBU_PLL_CLOCK to Kconfig
The main PLL frequency is 2GHz for Armada-XP and 1GHZ for Armada 375,
38x and 39x.

[ Linux commit ae142bd9976532aa5232ab0b00e621690d8bfe6a ]

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-01 09:09:20 +01:00
Chris Packham
eb1f7784f4 mvebu: db-88f6820-amc: Enable FIT support
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-01 09:06:17 +01:00
Marek Vasut
09410c6572 SPL: mmc: Make spl_mmc_load_image available
Make the spl_mmc_load_image() available globally, so it can be
invoked directly by SPL on extremely space-constrained systems.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-01 14:06:41 +09:00
Marek Vasut
b5b838f1a7 mmc: Tinification of the mmc code
Add new configuration option CONFIG_MMC_TINY which strips away all
memory allocation within the MMC code and code for handling multiple
cards. This allows extremely space-constrained SPL code use the MMC
framework.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-01 13:51:57 +09:00
Marek Vasut
ce9eca9438 mmc: Fix warning if debug() is not used
If debug() is not used, then the whole content of debug(...) will
be removed by the preprocessor, which will result in the following
warning. This patch adds __maybe_unused annotation to fix this.

drivers/mmc/mmc.c: In function ‘mmc_init’:
drivers/mmc/mmc.c:1685:11: warning: variable ‘start’ set but not used [-Wunused-but-set-variable]
  unsigned start;

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-01 13:51:08 +09:00
Tomas Melin
cd3d48807d mmc: add bkops-enable command
Add new command that provides possibility to enable the
background operations handshake functionality
(BKOPS_EN, EXT_CSD byte [163]) on eMMC devices.

This is an optional feature of eMMCs, the setting is write-once.
The command must be explicitly taken into use with
CONFIG_CMD_BKOPS_ENABLE.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
2016-12-01 11:09:44 +09:00
Seung-Woo Kim
f0ecfc5e7e mmc: s5p_sdhci: fix to check proper pinmux id
At sdhci_get_config(), there was wrong condition to check pimux
id, so this patch fixes to check proper pinmux id.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-01 11:09:44 +09:00
Tom Rini
38c4f0bdce ts4600: Disable CONFIG_DISPLAY_CPUINFO
Without this change we see:
../arch/arm/cpu/arm926ejs/mxs/mxs.c: In function ‘print_cpuinfo’:
../arch/arm/cpu/arm926ejs/mxs/mxs.c:181:23: warning: unused variable ‘data’ [-Wunused-variable]
../arch/arm/cpu/arm926ejs/mxs/mxs.c:180:6: warning: variable ‘cpurev’ set but not used [-Wunused-but-set-variable]

So the easy solution is to disable CONFIG_DISPLAY_CPUINFO

Reviewed-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-30 19:31:18 -05:00
Tom Rini
a2cb31086f Merge branch 'master' of git://git.denx.de/u-boot-mips 2016-11-30 19:31:17 -05:00
Tom Rini
bb417f1c90 travis.yml: Split Freescale ARM job up more
In order to avoid running into the time limit, split the 32bit and 64bit
Freescale boards into separate jobs.  We could either pass
"freescale & armv8" to buildman or exclude all of the 32bit CPUs.  While
the former is shorter I fear the amount of possible escaping required
would make things less readable.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-30 19:31:10 -05:00
Paul Burton
6fd596a1aa MIPS: Fix map_physmem for cached mappings
map_physmem should return a pointer that can be used by the CPU to
access the given memory - on MIPS simply returning the physical address
as it does prior to this patch doesn't achieve that. Instead return a
pointer to the memory within (c)kseg0, which matches up consistently
with the (c)kseg1 pointer that uncached mappings return via ioremap.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-11-30 16:18:19 +01:00
Paul Burton
7a3e0f74a7 MIPS: Use ram_top, not bi_memsize, in arch_lmb_reserve
When calculating the region to reserve for the stack in
arch_lmb_reserve, make use of ram_top instead of adding bi_memsize to
CONFIG_SYS_SDRAM_BASE. This avoids overflow if the system has enough
memory to reach the end of the address space.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-11-30 16:15:51 +01:00
Marek Vasut
e7e0469c88 mips: Let cache.h be included from assembly source
Add ifdef __ASSEMBLY__ around the function prototype to let cache.h
be included from assembly code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
2016-11-30 16:13:17 +01:00
Daniel Schwierzeck
4c2cb11516 common/board_f: enable initr_trap for MIPS
Enable initr_trap hook also for MIPS to install and enable
U-Boot's specific MIPS exception handlers.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-30 16:13:05 +01:00
Daniel Schwierzeck
6c59363004 MIPS: add handling for generic and EJTAG exceptions
Add exception handlers for generic and EJTAG exceptions. Most of
the assembly code is imported from Linux kernel and adapted to U-Boot.
The exception vector table will be reserved above the stack before
U-Boot is relocated. The exception handlers will be installed and
activated after relocation in the initr_traps hook function.

Generic exceptions are handled by showing a CPU register dump similar
to Linux kernel. For example:

malta # md 1
00000001:
Ooops:
$ 0   : 00000000 00000000 00000009 00000004
$ 4   : 8ff7e108 00000000 0000003a 00000000
$ 8   : 00000008 00000001 8ff7cd18 00000004
$12   : 00000002 00000000 00000005 0000003a
$16   : 00000004 00000040 00000001 00000001
$20   : 00000000 8fff53c0 00000008 00000004
$24   : ffffffff 8ffdea44
$28   : 90001650 8ff7cd00 00000004 8ffe6818
Hi    : 00000000
Lo    : 00000004
epc   : 8ffe6848 (text bfc28848)
ra    : 8ffe6818 (text bfc28818)
Status: 00000006
Cause : 00000410 (ExcCode 04)
BadVA : 8ff9e928
PrId  : 00019300
 ### ERROR ### Please RESET the board ###

EJTAG exceptions are checked for SDBBP and delegated to the SDBBP handler
if necessary. Otherwise the debug mode will simply be exited. The SDBBP
handler currently prints the contents of registers c0_depc and c0_debug.
This could be extended in the future to handle semi-hosting according to
the MIPS UHI specification.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Tested-by: Paul Burton <paul.burton@imgtec.com>
2016-11-30 16:12:17 +01:00
Daniel Schwierzeck
bd60252811 MIPS: reserve space for exception vectors
In order to set own exception handlers, a table with the exception
vectors must be built in DRAM and the CPU EBase register must be
set to the base address of this table.

Reserve the space above the stack and use gd->irq_sp as storage
for the exception base address.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:11:46 +01:00
Daniel Schwierzeck
67588bdade MIPS: add asm-offsets for struct pt_regs
Import asm-offsets.c from kernel to generate offset for struct pt_regs
needed by exception handlers.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:11:46 +01:00
Daniel Schwierzeck
924ad86638 MIPS: add possibility to setup initial stack and global data in SRAM
This adds a new Kconfig option CONFIG_MIPS_INIT_STACK_IN_SRAM which
a SoC can select if it supports some kind of SRAM. Together with
CONFIG_SYS_INIT_SP_ADDR the initial stack and global data can be
set up in that SRAM. This can be used to provide a C environment
also for lowlevel_init().

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:11:46 +01:00
Daniel Schwierzeck
c3e72ab801 MIPS: factor out code for initial stack and global data
Move the code for setting up the initial stack and global data
to a macro to be able to use it more than once.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:11:46 +01:00
Daniel Schwierzeck
65d297af7c MIPS: fix iand optimize setup of CP0 registers
Clear cp0 status while preserving implementation specific bits.
Set bits BEV and ERL as the arch specification requires after
a reset or soft-reset exception.

Extend and fix initialization of watch registers. Check if additional
watch register sets are implemented and initialize them too.

Initialize cp0 count as early as possible to get the most
accurate boot timing.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:11:46 +01:00
Daniel Schwierzeck
345490fcd6 MIPS: fix ROM exception vectors
When booting from ROM, early exceptions can't be handled
properly. Instead of busy-looping give the developer the
possibilty to examine the situation. Invoke an UHI
exception operation which can be read as unhandled exception
by a hardware debugger if one is attached. If the debugger
doesn't support UHI, the exception is read as unexpected
breakpoint.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:11:39 +01:00
Daniel Schwierzeck
af3971f81a MIPS: make inclusion of ROM exception vectors configurable
This adds a compile time option to include code for static
exception vectors. Static exception vectors are only needed,
when the U-Boot entry point is equal to the CPU reset exception
vector address. For instance this is the case when U-Boot is
used as ROM in Qemu or booted from parallel NOR flash. When
U-Boot is booted from RAM (e.g. loaded there by SPL), the
exception vectors need to be setup dynamically, which is done
in follow-up commits.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:07:17 +01:00