Commit graph

60 commits

Author SHA1 Message Date
Kumar Gala
f69766e4b5 85xx: Add the concept of CFG_CCSRBAR_PHYS
When we go to 36-bit physical addresses we need to keep the concept of
the physical CCSRBAR address seperate from the virtual one.

For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:03 -05:00
Jon Loeliger
a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00
Kumar Gala
73aa9ac2b4 85xx: Convert MPC8568 MDS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17 02:08:53 -06:00
Kumar Gala
c8c41d4a80 85xx: Use proper defines for PCI addresses
We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
be used for configuring the PCI ATMU.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-16 23:21:56 -06:00
Kumar Gala
4d3521cc79 85xx: convert remaining 85xx boards over to use new LAW init code
Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
to use new LAW init code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-16 23:21:56 -06:00
Wolfgang Denk
64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 20:31:39 +01:00
Anton Vorontsov
64d4bcb087 MPC8568E-MDS: set up QE pario for UART1
To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
be set up appropriately.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-01-09 16:25:03 -06:00
Anton Vorontsov
ad162249cb MPC8568E-MDS: reset UCCs to use them reliably
In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
UCCs.

p.s Similar code exists in the Linux kernel board file (for capability
reasons with older U-Boots), but should be removed some day.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-01-09 16:25:03 -06:00
Kumar Gala
2146cf5682 Reworked FSL Book-E TLB macros to be more readable
The old macros made it difficult to know what WIMGE and perm bits
were set for a TLB entry.  Actually use the bit masks for these items
since they are only a single bit.

Also moved the macros into mmu.h out of e500.h since they aren't specific
to e500.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:03 -06:00
Kumar Gala
acbca876fb Move the MPC8568 MDS board under board/freescale.
Minor path corrections needed to ensure buildability.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00